Tape casting of anode supports for solid oxide fuel cells at Forschungszentrum Jülich

International Journal of Applied Ceramic Technology

Volumn 11, Issue 1, 2014, Pages 125-135

  Schafbauer, Wolfgang ^a   Menzler, Norbert H ^a   Buchkremer, Hans P ^a  

^a FORSCHUNGSZENTRUM JÜLICH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ANODE-SUPPORT; ELECTROCHEMICAL PERFORMANCE; FUNCTIONAL LAYER; SINGLE CELLS; SOLID OXIDE FUEL CELLS (SOFCS); STACK TESTING; STANDARD CELL; TAPE CASTING;

CELLS; CYTOLOGY; SINTERING;

SOLID OXIDE FUEL CELLS (SOFC);

EID: 84891825629     PISSN: 1546542X     EISSN: 17447402     Source Type: Journal    
DOI: 10.1111/j.1744-7402.2012.02839.x     Document Type: Article

References (30)

1. ® Process," J. Mater. Process. Technol., 92-93, 107-111 (1999).
2. F. Tietz, H. P. Buchkremer, and, D. Stöver, " Components Manufacturing for Solid Oxide Fuel Cells," Solid State Ionics, 152-153 373-381 (2002).
3. J. Love, S. Amarasinghe, D. Selvey, X. Zheng, and, L. Chistiansen, " Development of SOFC Stacks at Ceramic Fuel Cells Ltd," ECS Trans., 25 [ 2 ] 115-124 (2009).
4. W. G. Wang, et al,., " Solid Oxide Fuel Cell Development at NIMTE," ECS Trans., 25 [ 2 ] 85-90 (2009).
5. N. Christiansen, et al,., " Solid Oxide Fuel Cell Development at Topsoe Fuel Cell A/S and Risoe National Laboratory," ECS Trans., 7 [ 1 ] 31-38 (2007).
6. M. C. Williams, J. P. Strakey, W. A. Surdoval, and, L. C. Wilson, " Solid Oxide Fuel Cell Technology Development in the US," Solid State Ionics, 177 [ 19-25 ] 2039-2044 (2006).
7. L. Blum, W. A. Meulenberg, H. Nabielek, and, R. Steinberger-Wilckens, " Worldwide SOFC Technology Overview and Benchmark," Int. J. Appl. Ceram. Technol., 2 [ 6 ] 482-492 (2005).
8. B. P. Borglum, E. Tang, and, M. Pastula, " The Status of SOFC Development at Versa Power Systems," ECS Trans., 25 [ 2 ] 65-70 (2009).
9. R. E. Mistler, " Evaluation of an Environmentally Friendly Plasticizer for Polyvinyl Butyral for Use in Tape Casting," Ceram. Eng. Sci. Proc., 28 [ 7 ] 27-34 (2008).
10. R. E. Mistler, and, E. R. Twiname, Tape Casting, The American Ceramic Society, Westerville, OH, 2000.
11. R. Moreno, " The Role of Slip Additives in Tape Casting Technology: Part 1-Solvents and Dispersants," Am. Ceram. Soc. Bull., 71 [ 10 ] 1521-1531 (1992).
12. R. Moreno, " The Role of Slip Additives in Tape Casting Technology: Part 2-Binders and Plasticizers," Am. Ceram. Soc. Bull., 71 [ 11 ] 1647-1657 (1992).
13. 3 Type Cathodes for Planar Anode-Supported SOFCs," J. Fuel Cell Sci. Technol., 3 [ 4 ] 415-421 (2006).
14. V. A. C. Haanappel, et al,., " Optimisation of Processing and Microstructural Parameters of LSM Cathodes to Improve the Electrochemical Performance of Anode-supported SOFCs," J. Power Sources, 141 216-226 (2005).
15. V. A. C. Haanappel, and, M. J. Smith, " A Review of Standardizing SOFC Measurement and Quality Assurance at FZJ," J. Power Sources, 171 [ 1 ] 169-178 (2007).
16. L. Blum, et al,., " Solid Oxide Fuel Cell Development at Forschungszentrum Jülich," Fuel Cells, 7 [ 3 ] 204-210 (2007).
17. Solutia. Ceramic Binder Applications Technical Bulletin, Butvar Polyvinyl Butyral Resin, St. Louis, MO, 2006. Available at http://www.butvar.com/pdfs/en/ Updated-Butvar-Ceramic-Binder-Bulletin-V5.pdf.
18. M. J. Cima, J. A. Lewis, and, A. D. Devoe, " Binder Distribution in Ceramic Greenware During Thermolysis," J. Am. Ceram. Soc., 72 [ 7 ] 1192-1199 (1989).
19. P. M. Raj, A. Odulena, and, W. R. Cannon, " Anisotropic Shrinkage During Sintering of Particle-oriented Systems-Numerical Simulation and Experimental Studies," Acta Mater., 50 [ 10 ] 2559-2570 (2002).
20. W. Schafbauer, R. Kauert, N. H. Menzler, and, H. P. Buchkremer, " Tape Casting of Anode Substrate for SOFCs," CD-ROM Proceedings of the 8th European SOFC Forum, Poster B0512, 30.06.-04.07.2008, Lucerne, Switzerland.
21. G. P. van der Beeck, U. Gontermann-Gehl, and, E. Krafczyk, " Binder Distribution in Green Ceramic Foils," J. Eur. Ceram. Soc., 15 [ 8 ] 741-758 (1995).
22. W. Schafbauer, N. H. Menzler, and, H. P. Buchkremer, " Influence of Thermal Treatment During Cell Manufacturing on the Performance of Tape Cast Solid Oxide Fuel Cells," ECS Trans., 25 649-654 (2009).
23. R. Mücke, N. H. Menzler, H. P. Buchkremer, and, D. Stöver, " Cofiring of Thin Zirconia Films During SOFC Manufacturing," J. Am. Ceram. Soc., 92 [ Suppl. 1 ] S95-S102 (2009).
24. P. Ried, et al,., " Processing of YSZ Screen Printing Pastes and the Characterization of the Electrolyte Layers for Anode Supported SOFC," J. Eur. Ceram. Soc., 28 [ 9 ] 1801-1808 (2008).
25. N. H. Menzler, and, V. A. C. Haanappel, " Influence of Anode Thickness on the Power Output of Solid Oxide Fuel Cells with (La,Sr)(Co,Fe)-type Cathode," J. Power Sources, 195 [ 16 ] 5340-5343 (2010).
26. R. Steinberger-Wilckens, et al,., " Overview of the Development of Solid Oxide Fuel Cells at Forschungszentrum Jülich," Int. J. Appl. Ceram. Technol., 3 [ 6 ] 470-476 (2006).
27. L. G. J. de Haart, J. Mougin, O. Posdziech, J. Kiviaho, and, N. H. Menzler, " Stack Degradation in Dependence of Operation Parameters; the RealSOFC Sensitivity Analysis," Fuel Cells, 9 [ 6 ] 794-804 (2009).
28. N. H. Menzler, F. Tietz, M. Bram, I. C. Vinke, and, L. G. J. de Haart, " Degradation Phenomena in SOFCs with Metallic Interconnects," Ceram. Eng. Sci. Proc., 29 [ 5 ] 91-102 (2008).
29. O. Büchler, M. Bram, R. Mücke, and, H. P. Buchkremer, " Preparation of Thin Functional Layers for Anode Supported SOFC by Roll Coating Process," ECS Trans., 25 [ 2 ] 655-663 (2009).
30. R. Mücke, O. Büchler, M. Bram, A. Leonide, E. Ivers-Tiffée, and, H. P. Buchkremer, " Preparation of Functional Layers for Anode-supported Solid Oxide Fuel Cells by the Reverse Roll Coating Process," J. Power Sources, 196 [ 22 ] 9528-9535 (2011).