Design of external fixators used in traumatology and orthopaedics-treatment of fractures of pelvis and its acetabulum

Procedia Engineering

Volumn 48, Issue , 2012, Pages 164-173

  Frydrýšek, Karel ^a   Jořenek, Jaroslav ^a   Učeň, Oldřich ^a   Kubín, Tomáš ^a   Žilka, Luboš ^b   Pleva, Leopold ^c  

^a VSB TECHNICAL UNIVERSITY OF OSTRAVA   (Czech Republic)

^b MEDIN   (Czech Republic)

^c UNIVERSITY HOSPITAL OSTRAVA   (Czech Republic)

Author keywords

Biomechanics; Design; External fixator; Fractures; Traumatology

Indexed keywords

EID: 84891707205     PISSN: 18777058     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1016/j.proeng.2012.09.501     Document Type: Conference Paper

References (23)

1. Frydrýšek, K., 2011. Probabilistic approach as a method used in the solution of engineering design for biomechanics and mining, j. World Academy of Science, Engineering and Technology, pISSN 2010-376X, eISSN 2010-3778, issue 59, Venice, Italy, pp. 1489-1495.
2. Frydrýšek, K., 2009. Stochastic solution and evaluation of the ore disintegration process, in Proceedings of the 2009 International Conference on Scientific Computing CSC2009, ISBN: 1-60132-098-1, CSREA Press, Las Vegas, USA, pp. 40-46.
3. Frydrýšek, K., Koštial, P., Barabaszová, K., Kukutschová, J., 2011. New ways for designing external fixators applied in treatment of open and unstable Fractures, j. World Academy of Science, Engineering and Technology, ISSN 2010-376X (print version) ISSN 2010-3778 (electronic version), vol. 7, issue 76, pp. 639-644.
4. Frydrýšek, K., Nikodým, M. et al, 2010. Beams and frames on elastic foundation 3, ISBN 978-80-248-2257-0, VŠB-Technical University of Ostrava, Ostrava, Czech Republic, pp. 1-611.
5. Jančo, R., 2010. Numerical Methods of Solution of Beam on Elastic Foundation, In: 13th International Conference MECHANICAL ENGINEERING 2010, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, ISBN 978-80-227-3304-4, Bratislava, Slovakia, pp. S1-60-S1-65.
6. Kala, Z., 2011. Sensitivity analysis of steel plane frames with initial imperfections, in Engineering Structures, vol.33, no.8, pp. 2342-2349.
7. Klučka, R., Sivera, M., Senatore, A., 2012. Numerical solution of centrifugal stiffening, in: 14th International Conference APPLIED MECHANICS Conference Proceedings, University of West Bohemia, Plzeň, Czech Republic, ISBN 978-80-261-0097-3, pp. 93-96.
8. Marek, P., Brozzetti, J., Guštar, M., Tikalsky, P., 2003. Probabilistic assessment of structures using Monte Carlo simulation background, exercises and software, (2nd extended edition), ISBN 80-86246-19-1, ITAM CAS, Prague, Czech Republic.
9. Marek, P., Guštar, M., Anagnos, T., 1995. Simulation-based reliability assessment for structural engineers, CRC Press, Boca Raton, USA, ISBN 0-8493-8286-6.
10. Sivera, M., Frydrýšek, K., Rojíšek, J., Janečka, M., Koštial, P., Jořenek, J., 2012. Numerical solution of external fixator for treatment of pelvis, in: 14th International Conference APPLIED MECHANICS Conference Proceedings, University of West Bohemia, Plzeň, Czech Republic, ISBN 978-80-261-0097-3, pp. 145-148.
11. Tokarský, J., Čapková, P., Rafaja, D., Klemm, V., Valášková, M., Kukutschová, J., Tomáš ek, V., 2009. Adhesion of silver nanoparticles on the clay substrates; modeling and experiment, in Applied Surface Science, ISSN: 0169-4332, doi:10.1016/j.apsusc.2009.11.037.
12. Tvrdá, K., Dický, J., 2005. Comparison of optimization methods, In: Proceedings of the 4th International Conference on New Trends in Statics and Dynamics of Buildings, Bratislava, Slovakia, pp. 163-164, ISBN 80-227-2277-4.
13. Valášková, M., Simha Martynková, G., Matějka, V., Barabaszová, K., Plevová, E., Měřínská, D., 2009. Organovermiculite nanofillers in polypropylene, in: Applied Clay Science, ISSN 0169-1317, 43, pp. 108-112.
14. Frydrýšek, K., 2006. Nosníky a rámy na pružném podkladu 1 (Beams and Frames on Elastic Foundation 1), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, ISBN 80-248-1244-4, Ostrava, Czech Republic, pp. 1-463, written in Czech language.
15. Frydrýšek, K., 2010. Pravděpodobnostní výpočty v mechanice 1 (Probabilistic calculations in mechanics 1), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, Ostrava, ISBN 978-80-248-2314-0, Ostrava, Czech Republic, pp. 1-149, written in Czech language.
16. Frydrýšek, K., Jančo, R. et al, 2008. Nosníky a rámy na pružném podkladu 2 (Beams and Frames on Elastic Foundation 2), Faculty of Mechanical Engineering, VŠB-Technical University of Ostrava, ISBN 978-80-248-1743-9, Ostrava, Czech Republic, pp. 1-516, written in Czech language.
17. Janečka, M. Výzkum a vývoj zevního fixátoru na pánev (acetabulum), včetně experimentálního měření a počítačového modelování, thesis of Ph.D. work, VŠB-Technical University of Ostrava, Ostrava, Czech Republic, pp. 1-17, written in Czech language.
18. Jořenek, J. Biomechanika-Externí fixátor pro pelvis a acetabulum (Biomechanics-External fixator for pelvis and acetabulum), diploma thesis, VŠB -Technical University of Ostrava, Ostrava, Czech Republic, pp. 1-68, written in Czech language.
19. Madeja, R., Pleva, L. Vávrová, P., 2009. Navigation in traumatology, j. Úraz. chir., 17, no. 3, Czech Republic, written in Czech language, pp. 1-6.
20. Pleva, L., 1999. External fixator for treatment of acetabulum fractures, final report of the project IGA MZ ČR, reg. č. 3522-4, written in Czech language, FNsP-Ostrava-Poruba, Czech Republic, pp. 1-77.
21. Rozum, K., 2008. External fixators for the treatment of open unstable fractures, inaugural work written in Czech language, FME, VŠB-Technical University of Ostrava, Ostrava, Czech Republic, ISBN 978-80-248-1670-8, pp. 1-43,.
22. http://aplmech.vsb.cz/zevni-fixace/
23. http://www.akutne.cz/res/publikace/damage-control-komplexniho-poraneni- panve-ruber-v.pdf