Design and Analysis of Composite Structures: With Applications to Aerospace Structures

Design and Analysis of Composite Structures: With Applications to Aerospace Structures

Volumn , Issue , 2010, Pages

  Kassapoglou, Christos ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891585409     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470972700     Document Type: Book

References (137)

1. Jane's All the World's Aircraft 2000-2001, P. Jackson (ed.), Jane's Information Group, June 2000.
2. NetComposites News, 14 December 2000.
3. Aerospace America, May 2001, pp 45-47.
4. Aerospace America, September 2005.
5. www.compositesworld.com/hpc/issues/2005/May/865.
6. www.boeing.com/news/feature/concept/background.html.
7. www.4spe.org/pub/pe/articles/2005/august/08_toensmeier.pdf.
8. Watson, J.C. and Ostrodka, D.L., AV-8B Forward Fuselage Development, Proc. 5th Conf. on Fibrous Composites in Structural Design, New Orleans, LA, January 1981.
9. Gutowski, T.G, Hoult, D., Dillon, G., Mutter, S., Kim, E., Tse, M., and Neoh, E.T.., Development of a Theoretical Cost Model for Advanced Composite Fabrication, Proc. 4th NASA/DoD Advanced Composites Technology Conf., Salt Lake City, UT, 1993.
10. Gutowski, T.G., Neoh, E.T., and Dillon, G., Scaling Laws for Advanced Composites Fabrication Cost, Proc. 5th NASA/DoD Advanced Composites Technology Conf., Seattle, WA, 1994, pp. 205-233.
11. Apostolopoulos, P., and Kassapoglou, C., Cost Minimization of Composite Laminated Structures-Optimum Part Size as a Function of Learning Curve Effects and Assembly, Journal of Composite Materials, 36(4) 501-518 (2002).
12. Tatting, B., and G€urdal, Z, Design and Manufacture of Elastically Tailored Tow-Placed Plates, NASA CR 2002 211919, August 2002.
13. Jegley, D., Tatting, B., and G€urdal, Z., Optimization of Elastically Tailored Tow-Placed Plates with Holes, 44the AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conf., Norfolk VA, 2003, also paper AIAA-2003-1420.
14. 1st NASA Advanced Composites Technology Conf., NASA CP 3104, Seattle WA, 1990.
15. 2nd NASA Advanced Composites Technology Conf., NASA CP 3154, Lake Tahoe, NV, 1991.
16. Abbott, R., Design and certification of the all-composite airframe. Society of Automotive Engineers Technical Paper Series-Paper No 892210; 1989.
17. Whitehead, R.S., Kan, H.P., Cordero, R. and Saether E.S., Certification testing methodology for composite structures: volume I-Data analysis. Naval Air Development Center Report 87042-60(DOT/FAA/CT-86-39); 1986.
18. Whitehead, R.S., Kan, H.P., Cordero, R. and Saether E.S., Certification testing methodology for composite structures: volume II-Methodology development. Naval Air Development Center Report 87042-60 (DOT/FAA/CT-86-39); 1986.
19. Kassapoglou, C., Determination of the Optimum Implementation Plan for Manufacturing Technologies-The case of a Helicopter Fuselage, Journal of Manufacturing Systems, 19, 121-133 (2000).
20. Kassapoglou, C., Selection of Manufacturing Technologies for Fuselage Structures for Minimum Cost and Low Risk: Part A-Problem Formulation, Journal of Composites Technology and Research, 21, 183-188 (1999).
21. Kassapoglou, C., Selection of Manufacturing Technologies for Fuselage Structures for Minimum Cost and Low risk: Part B-Solution and Results, Journal of Composites Technology and Research, 21, 189-196 (1999).
22. Sarkar, P. and Kassapoglou, C., An ROI-Based Strategy for Implementation of Existing and Emerging Technologies, Spring Research Conf. on Statistics in Industry and Technology, Minneapolis St Paul MN, June 1999. Also IEEE Transactions on Engineering Management, 48, 414-427 (1999).
23. McGettrick, M., and Abbott, R., To MRB or not to be: Intrinsic manufacturing variabilities and effects on load carrying capacity, Proc. 10th DoD/NASA/FAAConf. onFibrous Composites in Structural Design, Hilton Head, SC, 1993, pp 5-39.
24. Tsai, S.W., Mechanics of Composite Materials Part I-Introduction, Report AFML-TR-66-149, Part I Air Force Materials Laboratory Research and Technology Division, Wright-Patterson Air Force Base, Ohio, June 1966.
25. Tsai, S.W., Mechanics of Composite Materials, Part II-Theoretical Aspects, Report AFML-TR-66-149, Part II, Air Force Materials Laboratory Research and Technology Division, Wright-Patterson Air Force Base, Ohio, November, 1966.
26. Ashton, J.E., Halpin, J.C. and Petit, P.H., Primer on Composite Materials: Analysis, Technomic, 1969.
27. Jones, R.M, Mechanics of Composite Materials, McGraw-Hill, Washington DC, 1975.
28. Tsai, S.W. and Hahn, H.T., Introduction to Composite Materials, Technomic Publishing Co, Westport CT, 1980.
29. Love, A.E.H., A Treatise on the Mathematical Theory of Elasticity, 4th edn, Dover Publications, NY, 1944, Article 66.
30. Williams, J.G., Fracture Mechanics of Composites Failure, Proceedings of the Institution of Mechanical Engineers C: Journal of Mechanical Engineering Sciences, 204, 209-218 (1990).
31. Gotsis, P.K., Chamis, C. and Minnetyan, L., Prediction of Composite Laminate Fracture Micromechanics and Progressive Failure, Composites Science and Technology, 58, 1137-1149 (1998).
32. Aboudi, J., Micromechanical Analysis of the Strength of Unidirectional Fiber Composites, Composites Science and Technology, 33, 79-46 (1988).
33. Hill, R., The Mathematical Theory of Plasticity, Oxford University Press, London, 1950.
34. Tsai, S.W. Strength Theories of Filamentary Structures, in Fundamental Aspects of Fiber Reinforced Plastic Composites, Wiley, New York, 1968, pp 3-11.
35. Tsai, S.W. and Wu, E.M., A General Theory of Strength for Anisotropic Materials, Journal of Composite Materials, 1971, 58-80.
36. Nahas, M.N., Survey of Failure and Post-Failure Theories of Laminated Fiber-Reinforced Composites, Journal of Composites Technology and Research, 8, 138-153 (1986).
37. Quinn, B.J. and Sun, C.T., ACritical Evaluation of Failure Analysis Methods for Composite Laminates, Proc. 10th DoD/NASA/FAA Conf. on Fibrous Composites in Structural Design, vol. V, 1994, pp V21-V37.
38. Hart-Smith, L.J., A Re-examination of the Analysis of In-plane Matrix Failures in Fibrous Composite Laminates, Composites Science and Technology, 56, 107-121 (1996).
39. Hart-Smith, L.J., The role of biaxial stresses in discriminating between meaningful and illusory composite failure theories, Composite Structures, 25 (1993) 3-20.
40. Hart-Smith, L.J., An inherent fallacy in composite interaction failure criteria, Composites, 24 (1993) 523-524.
41. Hashin, Z. and Rotem, A., A Fatigue Failure Criterion for Fiber Reinforced Materials, Journal of Composite Materials, 7, 448-464 (1973).
42. Dávila, C., Camanho, P.P. and Rose, C.A., Failure Criteria for FRP Laminates, Journal of Composite Materials, 39, 323-345 (2005).
43. Nuismer, R.J., Continuum Modeling of Damage Accumulation and Ultimate Failure in Fiber Reinforced Laminated Composite Materials, Research Workshop, Mechanics of Composite Materials, Duke University, Durham NC, 1978, pp 55-77.
44. Reddy, Y.S. and Reddy, J.N., Three-Dimensional Finite Element Progressive Failure Analysis of Composite Laminates Under Axial Extension, Journal of Composites Technology and Research, 15, 73-87 (1993).
45. Brewer, J.C. and Lagace, P.A., Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, 22, 1141-1155 (1988).
46. Gurdal, Z, Haftka, R.T., and Hajela, P. Design and Optimization of Laminated Composite Materials, JohnWiley and Sons, Inc, 1999, Chapter 5.4.
47. Metallic Materials and Elements for Aerospace Vehicle Structures, Military Handbook 5H, US Department of Defense, December 1998, Chapter 9.
48. Composite Materials Handbook, Mil-Hdbk-17-1F, US Department of Defense, vol. 1, 2002, Chapter 8.3.
49. Whitehead, R.S., Lessons Learned for Composite Structures, Proc 1st NASA Advanced Composites Technology Conf., Seattle WA, 1990, pp 399-415.
50. Williams, J.C., Effect of Impact Damage and Open Holes on the Compression Strength of tough resin/high strength fiber laminates, NASA-TM-85756, 1984.
51. Puhui, C., Zhen, S.and Junyang, W., A New Method for Compression After Impact Strength Prediction of Composite Laminates, Journal of Composite Materials, 36, 589-610 (2002).
52. Kassapoglou, C., Jonas, P.J.and Abbott, R., Compressive Strength of Composite Sandwich Panels after Impact Damage: An Experimental and Analytical Study, Journal of Composites Technology and Research, 10, 65-73 (1988).
53. Nyman, T., Bredberg, A.and Schoen, J., Equivalent Damage and Residual Strength of Impact Damaged Composite Structures, Journal of Reinforced Plastics and Composites, 19, 428-448 (2000).
54. Dost, E.F., Ilcewicz, L.B., Avery, W.B., and Coxon, B.R., Effect of Stacking Sequence on Impact Damage Resistance and Residual Strength for Quasi-isotropic Laminates, ASTM STP 1110, 1991, pp 476-500.
55. Xiong, Y., Poon, C., Straznicky, P.V., and Vietinghoff, H., A Prediction Method for the Compressive Strength of Impact Damaged Composite Laminates, Composite Structures, 30, 357-367 (1993).
56. Kassapoglou, C., Compression Strength of Composite Sandwich Structures After Barely Visible Impact Damage, Journal of Composites Technology and Research, 1996, 274-284.
57. Rivello, R.M., Theory and Analysis of Flight Structures, McGraw-Hill Book Co., 1969, Chapter 2.
58. Whitney, J.M., Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing Co., Lancaster PA, 1987, Chapters 1 and 2.
59. Herakovich, C.T., Mechanics of Fibrous Composites, John Wiley and Sons, Inc, 1998, Chapter 5.
60. Kassapoglou, C.and Bauer, G., Composite Plates Under Concentrated Load on One End and Distributed Load on the Opposite End, Mechanics of Advanced Materials and Structures, 17, 196-203 (2010).
61. Hildebrand, F.B., Advanced Calculus for Applications, Prentice Hall, Englewood Cliffs, New Jersey, 1976, Chapter 9.
62. Crandall, S.H. Engineering Analysis, McGraw-Hill, 1956, Section 4.4.
63. Pian, T.H.H., Variational principles for incremental finite element methods, Journal of the Franklin Institute, 302, 473-488 (1976).
64. Metallic Materials and Elements for Aerospace Vehicle Structures, Military Handbook 5H, US Department of Defense, December 1998, Chapter 3.
65. Whitney, J.M., Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing 1987, Section 5.5
66. Tung, T.K. and Surdenas, J., Buckling of Rectangular Orthotropic Plates Under Biaxial Loading, Journal of Composite Materials, 21, 124-128 (1987).
67. Libove, C., Buckle Pattern of Biaxially Compressed Simply Supported Orthotropic Rectangular Plates, Journal of Composite Materials, 17, 45-48 (1983).
68. Barbero, E.J., Introduction to Composite Material Design, Taylor & Francis Inc, Philadelphia, PA, 1999, Chapter 9.
69. Whitney, J.M., Structural Analysis of Laminated Anisotropic Plates, Technomic Publishing, 1987, Section 5.7
70. Mura, T., and Koya, T., Variational Methods in Mechanics, Oxford University Press, 1992, Chapter 8.
71. Thielemann, W., Contribution to the Problem of Buckling of Orthotropic Plates With Special Reference to Plywood, NACA TM 1263, 1950.
72. Seydel, E., On the Buckling of Rectangular Isotropic or Orthogonal Isotropic Plates by Tangential Stresses, Ing. Archiv, 4, 169 (1933).
73. Kassapoglou, C., Simultaneous Cost andWeight Minimization of Composite Stiffened Panels Under Compression and Shear, Composites Part A: Applied Science and Manufacturing, 28, 419-435 (1997).
74. Sullins, R.T., Smith, G.W. and Spier, E.E. Manual for Structural Stability Analysis of Sandwich Plates and Shells, NASA CR-1457, December 1969.
75. Composite Materials Handbook, Mil-Hdbk-17-3F, vol. 3, Polymer matrix composites materials usage, design and analysis, January 1997, Chapter 5.7.
76. Roberts, J.C., Analytic Techniques for Sizing the Walls of Advanced Composite Electronics Enclosure, Composites Part B: Engineering, 30, 177-187 (1999).
77. Wagner, H., Structures of Thin Sheet Metal, Their Design and Construction, NACA Memo 490.
78. Wagner, H., Flat Sheet GirderWith Thin MetalWeb, Part I (NACA TM 604), Part II (NACA TM 605), and Part III, (NACA TM 606).
79. Kuhn, P., Peterson, J.P. and Levin, L.R., A Summary of Diagonal Tension Part 1-Methods of Analysis, NACA TN 2661, 1952.
80. Kuhn, P., Peterson, J.P. and Levin, L.R.,ASummary of DiagonalTension Part 2-Experimental Evidence,NACATN 2662, 1952.
81. Deo R.B., Agarwal, B.L. and Madenci, E., Design Methodology and Life Analysis of Postbuckled Metal and Composite Panels, AFWAL-TR-85-3096, vol. I, December 1985.
82. Deo, R.B., Kan, H.P. and Bhatia, N.M., Design Development and Durability Validation of Postbuckled Composite and Metal Panels, Volume III-Analysis and Test Results, Northrop Corp., WRDC-TR-89-3030, vol. III, November 1989.
83. http://mathworld.wolfram.com/CubicEquations.html
84. Hart-Smith, L.J. The key to designing durable adhesively bonded joints, Composites, 25, 895-898 (1994).
85. Kairouz, K.C. and Matthews, F.L, Strength and failure modes of bonded single lap joints between cross-ply adherends Composites, 24, 475-484 (1993).
86. Rivello, R.M., Theory and Analysis of Flight Structures, McGraw-Hill Book Co., 1969, Chapter 14.
87. Timoshenko, S.M., and Gere, J.M., Theory of Elastic Stability, McGraw-Hill Book Co., 1961, Section 2.1.
88. Aristizabal-Ochoa, J.D.Classical stability of beam columns with semi-grid connections on elastic foundation, 16-18 July 2003, Paper 67.
89. O'Donnell,W.J., The Additional Deflection of a Cantilever Due to the Elasticity of the Support, ASME Journal of. Applied Mechanics, 27, 461 (1960).
90. Mil-Hdbk 17-3F, vol. 3, chap. 5, Fig 5.7.2.h, 17 June 2002.
91. Mil-Hdbk 17-3F, vol. 3, chap. 5, Fig 5.7.2.f, 17 June 2002.
92. Hart-Smith, L.J., The key to designing efficient bolted composite joints, Composites, 25, 835-837 (1994).
93. Hart-Smith, L.J., Bolted Joints in Graphite/Epoxy Composites, McDonnell-Douglas Corporation, Report A600503, June 1976.
94. Ramkumar, R.L., Saether, E.S. and Cheng, D., Design Guide for Bolted Joints in Composite Structures, Air Force Wright Aeronautical Report AFWAL-TR-86-3035, March 1986.
95. Megson, T.H.G., Aircraft Structures for Engineering Students, Elsevier, 2007, Chapter 3.
96. Kassapoglou, C., Stress Determination at Skin-Stiffener Interfaces of Composite Stiffened Panels Under Generalized Loading, Journal of Reinforced Plastics and Composites, 13, 1555-1572 (1994).
97. Kassapoglou, C., Calculation of Stresses at Skin-Stiffener Interfaces of Composite Stiffened Panels Under Shear Loads, International Journal of Solids and Structures, 30, 1491-1503 (1993).
98. Kassapoglou C. and DiNicola A.J., Efficient Stress Solutions at Skin Stiffener Interfaces of Composite Stiffened Panels, AIAA Journal, July 1992, pp 1833-1839.
99. Hyer,M.W. and Cohen, D., Calculation of Stresses and Forces Between the Skin and Stiffener in Composite Panels, AIAA Paper 87-0731, 28th SDM Conference, Monterey CA, April 1987.
100. Cohen, D. and Hyer, M.W., Influence of Geometric Non-linearities on Skin-Stiffener Interface Stresses, AIAA Paper 88-2217, 29th SDM Conference, Williamsburg VA, April 1988.
101. Volpert, Y., and Gottesman, T., Skin-stiffener interface stresses in tapered composite panel, Composite Structures, 33, 1-6 (1995).
102. Baker, D.J. and Kassapoglou, C., Post buckled composite panels for helicopter fuselages: Design, analysis, fabrication and testing. Presented at the American Helicopter Society International Structures Specialists' Meeting, Hampton Roads Chapter, Structures Specialists Meeting, Williamsburg VA, 30 October-1 November 2001.
103. Wiggenraad, J.F.M. and Bauld, N.R., Global/Local Interlaminar Stress Analysis of a Grid-Stiffened Composite Panel, Journal of Reinforced Plastics and Composites, 12, 237-253 (1993).
104. Minguet, P.J. and O'Brien, T.K., Analysis of Test Methods for Characterizing Skin/Stringer Debonding Failures in Reinforced Composite Panels, in; Composite Materials: Testing and DesignASTMSTP 1274 R. B. Deo and C. R. Saff (eds), American Society for Testing and Materials, 1996, pp 105-124.
105. Wang, J.T. and Raju, I.S., Strain Energy Release Rate Formulae for Skin-Stiffener Debond Modeled with Plate Elements, Engineering Fracture Mechanics, 54, 211-228 (1996).
106. Wang, J.T., Raju, I.S. and Sleight, D.W., Composite Skin-Stiffener Debond Analyses, Using Fracture Mechanics Approach with Shell Elements, Composites Engineering, 5, 277-296 (1995).
107. Brewer, J.C. and Lagace, P.A., Quadratic Stress Criterion for Initiation of Delamination, Journal of Composite Materials, 22, 1141-1155 (1988).
108. Fenske, M.T., andVizzini, A.J., The Inclusion of In-Plane Stresses in Delamination Criteria, Journal of Composite Materials, 35, 1325-1342 (2001).
109. Hildebrandt, F.B. Advanced Calculus for Applications, Prentice Hall, Englewood Cliffs, NJ, 1976, Section 7.8.
110. Wang, A.S.D. and Crossman, F.W. Some new results on edge effect in symmetric composite laminates. Journal of Composite Materials, 11, 92-106 (1977).
111. Bauld, N.R., Goree, J.G. and Tzeng, L-S., A comparison of finite-difference and finite element methods for calculating free edge stresses in composites, Composites and Structures, 20, 897-914 (1985).
112. Spilker, R.L and Chou, S.C., Edge Effects in Symmetric Composite Laminates: Importance of Satisfying the Traction-Free-Edge Condition, Journal of Composite Materials, 14, 2-20 (1980).
113. Wang, S.S. and Choi, I., Boundary-layer effects in composite laminates, Part I-free edge stress solutions and basic chacteristics, ASME Transactions Applied Mechanics, 49, 541-548 (1982).
114. Wang, S.S. and Choi, I., Boundary-layer effects in composite laminates, Part II-free edge stress solutions and basic characteristics, ASME Transactions Applied Mechanics, 49, 549-560 (1982).
115. Farley, G.L. and Baker, D.J., In-Plane Shear Test of Thin Panels, Experimental Mechanics, 23, 81-88 (1983).
116. Apostolopoulos, P. and Kassapoglou, C., Cost Minimization of Composite Laminated Structures-Optimum Part Size as a Function of Learning Curve Effects and Assembly, Journal of Composite Materials, 36(4), 501-518 (2002).
117. Carstensen, T., Cournoyer, D., Kunkel, E. and Magee, C., X-cor® Advanced Sandwich Core Material, Proc. 33rd Int. SAMPE Conf., Seattle, WA, November 2001.
118. Marasco, A.M., Cartié, D.D.R., Partridge, I.K. and Rezai, A., Mechanical Properties Balance in Novel Z-Pinned Sandwich Panels: Out-of-Plane Properties, Composites Part A: Applied Science and Manufacturing, 37, 295-302 (2006).
119. Plantema, F.J., Sandwich Construction, John Wiley & Sons, NY, 1966.
120. Timoshenko, S.P. and Gere, J.M., Theory of Elastic Stability, McGraw-Hill, NY, 1961, p. 351.
121. Whitney, J.M. and Pagano, N.J., (1970). Shear Deformation in Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, 37, 1031-1036 (1970).
122. Hoff, N.J., Mautner, S.E., The Buckling of Sandwich-Type Panels, Journal of Aeronautical Sciences, July 1945, 285-297.
123. Ley, R.P., Lin, W. and Mbanefo, U., Facesheet Wrinkling in Sandwich Structures, NASA/CR-1999-208994, January 1999.
124. Vadakke, V. and Carlsson, L.A., Experimental Investigation of Compression Failure Mechanisms of Composite Faced Foam Core Sandwich Specimens, Journal of Sandwich Structures and Materials, 6, 327-342 (2004).
125. Kassapoglou, C., Fantle, S.C. and Chou, J.C., Wrinkling of Composite Sandwich Structures Under Compression, Journal of Composites Technology and Research, 17, 308-316 (1995).
126. Pearce, T.R.A. and Webber, J.P.H., Buckling of Sandwich Panels with Laminated Face Plates, Aeronautical Quarterly, 23, 148-160 (1972).
127. Bruhn, E.F., Analysis and Design of FlightVehicle Structures, S.R. Jacobs&Assoc, Indianapolis, IN, 1973, Section C12.10.3.
128. Sullins, R.T., Smith, G.W. and Spier, D.D, Manual for Structural Stability Analysis of Sandwich Plates and Shells, NASA CR 1457, 1969, Section 2.
129. Dobyns, A., Correlation of Sandwich Facesheet Wrinkling Test Results with Several Analysis Methods, 51st American Helicopter Society (AHS) Forum, Fort Worth, TX, 9-11 May 1995.
130. Birman, V. and Bert, C.W., Wrinkling of Composite Facing Sandwich Panels Under Biaxial Loading, Journal of Sandwich Structures and Materials, 6, 217-237 (2004).
131. Kassapoglou, C., Stress Determination and Core Failure Analysis in Sandwich Rampdown Structures Under Bending Loads, Fracture of Composites, E. Armanios (ed.), TransTech Publications, Switzerland, 1996, pp 307-326.
132. Bruhn, E.F., Analysis and Design of FlightVehicle Structures, S.R. Jacobs&Assoc., Indianapolis IN, 1973, Section C12.50.
133. Wong, R., Sandwich Construction in the Starship, Proc. 37th International SAMPE Symposium and Exhibition, Anaheim CA, 9-12 March 1992, pp 186-197.
134. Jonas, P., and Aldag, T., Certification of Bonded Composite Structure, SAE Technical Paper Series, Paper 871022, 1987; also presented at SAE General Aviation Aircraft Meeting and Exposition, Wichita KS, 28-30 April 1987.
135. Abdalla, MM, Kassapoglou, C. and Gurdal Z., Formulation of Composite Laminate Robustness Constraint in Lamination Parameters Space, Proc. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., Palm Springs CA, 4-7 May 2009.
136. Beckwith, SW, Designing with Composites: Suggested 'Best Practices' Rules, SAMPE Journal, 45, 36-37 (2009).
137. Caprino, F. and Crivelli Visconti, I., A Note on Specially Orthotropic Laminates, Journal of Composite Materials, 16, 395-399 (1982).