Noise and Vibration Analysis: Signal Analysis and Experimental Procedures

Noise and Vibration Analysis: Signal Analysis and Experimental Procedures

Volumn , Issue , 2011, Pages

  Brandt, Anders ^a  

^a UNIVERSITY OF SOUTHERN DENMARK   (Denmark)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891583650     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470978160     Document Type: Book

References (135)

1. Ahlin K 2006 Comparison of test specifications and measured field data. Sound and Vibration 40(9), 22-25.
2. Ahlin K, Magnevall M and Josefsson A 2006 Simulation of forced response in linear and nonlinear mechanical systems using digital filters Proc. ISMA2006, International Conference on Noise and Vibration Engineering, Catholic University, Leuven, Belgium.
3. Allemang R and Brown D 1982 A correlation coefficient for modal vector analysis Proc. 1st International Modal Analysis Conference, Orlando, FL.
4. Allemang RJ, Rost RW and Brown DL 1984 Multiple input estimation of frequency response functions Proc. 2nd International Modal Analysis Conference, Orlando, FL.
5. ANSI S1.11 2004 Specification for Octave-Band and Fractional-Octave-Band Analog and Digital Filters. American National Standards Institute.
6. Antoni J and Schoukens J 2007 A comprehensive study of the bias and variance of frequency-response-function measurements: Optimal window selection and overlapping strategies. Automatica 43(10), 1723-1736.
7. Antoni J and Schoukens J 2009 Optimal settings for measuring frequency response functions with weighted overlapped segment averaging. IEEE Transactions on Instrumentation and Measurement 58(9), 3276-3287.
8. Antoni J, Wagstaff P and Henrio JC 2004 H alpha - a consistent estimator for frequency response functions with input and output noise. IEEE Transactions on Instrumentation and Measurement 53(2), 457-465.
9. Bendat J and Piersol A 1993 Engineering Applications of Correlation and Spectral Analysis 2nd edn. Wiley Interscience.
10. Bendat J and Piersol AG 2010 Random Data: Analysis and Measurement Procedures 4th edn. Wiley Interscience.
11. Blackman RB and Tukey JW 1958a The measurement of power spectra from the point of view of communications engineering. 1. Bell System Technical Journal 37(1), 185-282.
12. Blackman RB and Tukey JW 1958b The measurement of power spectra from the point of view of communications engineering. 2. Bell System Technical Journal 37(2), 485-569.
13. Blough J 1998 Improving the Analysis of Operating Data on Rotating Automotive Components PhD Thesis University of Cincinnati, College of Engineering.
14. Bogert B, Healy M and Tukey J 1963 The quefrency alanysis of time series for echoes: Cepstrum, pseudoautocovariance, cross-cepstrum and saphe cracking In Proc. Symposium on time Series Analysis (ed. Rosenblatt M), pp 209-243.
15. Brandt A and Ahlin K 2003 A digital filter method for forced response computation Proc. 21st International Modal Analysis Conference, Kissimmee, FL.
16. Brandt A and Brincker R 2010 Impact excitation processing for improved frequency response quality Proc. 28th International Modal Analysis Conference, Jacksonville, FL Society for Experimental Mechanics.
17. Brandt A, Lagö T, Ahlin K and Tuma J 2005 Main principles and limitations of current order tracking methods Sound and Vibration 39(3), 19-22.
18. Brownlee K 1984 Statistical Theory and Methodology. Krieger Publishing Company.
19. Carlsson B 1991 Maximum flat digital differentiator. Electronics Letters 27(8), 675-677.
20. Cooley J, Lewis P and Welch P 1967 Historical notes on the fast fourier transform. IEEE Trans. on Audio and Electroacoustics 15(2), 76-79.
21. Cooley JW and Tukey JW 1965 An algorithm for machine calculation of complex fourier series. Mathematics of Computation 19(90), 297-301.
22. Cooley JW and Tukey JW 1993 On the origin and publication of the FFT paper - a citation-classic commentary on an algorithm for the machine calculation of complex Fourier-series-Cooley, J.W., Tukey, J.W. Current Contents/Engineering Technology and Applied Sciences (51-52), 8-9.
23. Cooley JW, Lewis PAW and Welch PD 1970 The application of the fast Fourier transform algorithm to the estimation of spectra and cross-spectra. Journal of Sound and Vibration 12(3), 339-352.
24. Craig RR and Kurdila AJ 2006 Fundamentals of Structural Dynamics. John Wiley & Sons, Inc.
25. Daniell PJ 1946 Discussion of 'on the theoretical specification and sampling properties of autocorrelated time-series'. Journal of the Royal Statistical Society 8 (suppl.)(1), 88-90.
26. Den Hartog JP 1985 Mechanical Vibrations. Dover Publications Inc.
27. Dippery KD, Phillips AWand Allemang RJ 1994 Condensation of the spatial domain in modal parameter-estimation. 12th International Modal Analysis Conference, Honolulu, HI 818-824. (ed. Maia N and Silva J) 2003 Theoretical and Experimental Modal Analysis. Research Studies Press, Baldock, Hertforsdhire, England.
28. Endo H, Randall RB and Gosselin C 2009 Differential diagnosis of spall vs. cracks in the gear tooth fillet region: Experimental validation. Mechanical Systems and Signal Processing 23(3), 636-651.
29. Ewins DJ 2000 Modal Testing: Theory, Practice and Application 2nd edn. Research Studies Press, Baldock, Hertfordshire, England.
30. Fladung W 1994 The development and implementation of multiple reference impact testing Master's Thesis University of Cincinnati.
31. Fladung W and Rost R 1997 Application and correction of the exponential window for frequency response functions. Mechanical Systems and Signal Processing 11(1), 23-36.
32. Fladung W, Zucker A, Phillips A and Allemang R 1999 Using cyclic averaging with impact testing Proc. 17th International Modal Analysis Conference, Kissimmee, FL.
33. Fyfe KR and Munck EDS 1997 Analysis of computed order tracking. Mechanical Systems and Signal Processing 11(2), 187-205.
34. Gaberson HA 2003 Using the velocity shock spectrum to predict shock damage. Sound and Vibration 37(9), 5-6.
35. Gaberson HA, Pal D and Chapler RS 2000 Classification of violent environments that cause equipment failure. Sound and Vibration 34(5), 16-23.
36. Gao Y and Randall RB 1996a Determination of frequency response functions from response measurements. 1. extraction of poles and zeros from response cepstra. Mechanical Systems and Signal Processing 10(3), 293-317.
37. Gao Y and Randall RB 1996b Determination of frequency response functions from response measurements. 2. regeneration of frequency response functions from poles and zeros. Mechanical Systems and Signal Processing 10(3), 319-340.
38. Goyder H 1984 Foolproof methods for frequency response measurements Proc. 2nd International Conference on Recent Advances in Structural Dynamics, Southampton.
39. Greenfield J 1977 Dealing with the shock environment using the shock response spectrum analysis. J. Soc. Environmental Engineers (9), 3-15.
40. Halvorsen W Gand Brown DL 1977 Impulse technique for structural frequency-response testing. Sound and Vibration 11(11), 8-21.
41. Hannig J and Lee TCM 2004 Kernel smoothing of periodograms under Kullback-Leibler discrepancy. Signal Processing 84(7), 1255-1266.
42. Hanson D, Randall RB, Antoni J, Thompson DJ, Waters TP and Ford RAJ 2007a Cyclostationarity and the cepstrum for operational modal analysis ofMIMO systems - part i: Modal parameter identification. Mechanical Systems and Signal Processing 21(6), 2441-2458.
43. Hanson D, Randall RB, Antoni J, Waters TP, Thompson DJ and Ford RAJ 2007b Cyclostationarity and the cepstrum for operational modal analysis of mimo systems - part ii: Obtaining scaled mode shapes through finite element model updating. Mechanical Systems and Signal Processing 21(6), 2459-2473.
44. Harris FJ 1978 Use of windows for harmonic-analysis with discrete fourier-transform. Proceedings of The IEEE 66(1), 51-83.
45. Haykin S 2003 Signals and Systems 2nd edn. John Wiley & Sons, Inc.
46. Heidemann MT, Johnson DH and Burrus CS 1985 Gauss and the history of the fast Fourier-transform. Archive For History of Exact Sciences 34(3), 265-277.
47. Henderson GR and Piersol AG 2003 Evaluating vibration environments using the shock response spectrum. Sound and Vibration 37(4), 18-21.
48. Heylen W, Lammens S and Sas P 1997 Modal Analysis Theory and Testing 2nd edn. Catholic University Leuven, Leuven, Belgium.
49. Higgins RJ 1990 Digital Signal Processing in VLSI. Prentice Hall.
50. Himmelblau H, Piersol AG,Wise JH and Grundvig MR 1993 Handbook for Dynamic Data Acquisition and Analysis. Institute of Environmental Sciences and Technology, Mount Prospect, Illinois.
51. Håkansson B and Carlsson P 1987 Bias errors in mechanical impedance data obtained with impedance heads. J. Sound and Vibration 113(1), 173-183.
52. Hotelling H 1933 Analysis of a complex of statistical variables into principal components. Journal of Educational Psychology 24, 417-441, 498-520.
53. IEC 61260 1995 Electroacoustics - Octave-Band and Fractional-Octave-Band Filters. International Electrotechnical Commission.
54. IEC 61672-1 2005 Electroacoustics - Sound level meters - Part 1: Specifications. International Electrotechnical Commission.
55. IEEE 1451.4 2004 A Smart Transducer Interface for Sensors and Actuators - Mixed-mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats. IEEE Standards Association. Inman D 2007 Engineering Vibration 3rd edn. Prentice Hall.
56. ISO 18431-1: 2005 Mechanical Vibration and Shock - Signal Processing - Part 1: General Introduction. International Organization for Standardization, Geneva, Switzerland.
57. ISO 18431-4: 2007 Mechanical Vibration and Shock - Signal Processing - Part 4: Shock spectrum analysis. International Organization for Standardization, Geneva, Switzerland.
58. ISO 2631-1: 1997 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 1: General requirements. International Organization for Standardization, Geneva, Switzerland.
59. ISO 2631-5: 2004 Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 5: Method for evaluation of vibration containing multiple shocks. International Organization for Standardization, Geneva, Switzerland.
60. ISO 2641: 1990 Vibration and shock - Vocabulary. International Organization for Standardization, Geneva, Switzerland.
61. ISO 8041: 2005 Human response to vibration - Measuring instrumentation. International Organization for Standardization, Geneva, Switzerland.
62. Kay SM and Marple SL 1981 Spectrum analysis - a modern perspective. Proceedings of the IEEE 69(11), 1380-1419.
63. Kennedy C and Pancu C 1947 Use of vectors in vibration measurement and analysis. J. of the Aeronautical Sciences 14(11), 603-625.
64. Konstantin-Hansen H and Herlufsen H 2010 Envelope and cepstrum analyses for machinery fault identification. Sound and Vibration 44(5), 10-12.
65. Kozin F and Natke HG 1986 System-identification techniques. Structural Safety 3(3-4), 269-316.
66. Kumar B and Roy SCD 1988 Coefficients of maximally linear, FIR digital differentiators for low-frequencies. Electronics Letters 24(9), 563-565.
67. Lalanne C 2002 Mechanical Vibration and Shock - Specification Development, Vol. 5. CRC Press.
68. Lebihan J 1995 Maximally linear FIR digital differentiators. Circuits Systems and Signal Processing 14(5), 633-637.
69. Lembregts F 1988 Frequency Domain Identification Techniques for Experimental Multiple Input Modal Analysis PhD Thesis Katholieke Universiteit Leuven, Leuven, Belgium.
70. Mansfield NJ 2005 Human Response to Vibration. CRC Press.
71. Mitchell L 1982 Improved methods for the FFT calculation of the frequency response function. J. of Mechanical Design.
72. Mitchell L and Cobb R 1987 An unbiased frequency response function estimator Proc. 5th International Modal Analysis Conference, London, UK, pp 364-373, London, U.K.
73. Newland DE 2005 An Introduction to Random Vibrations, Spectral, andWavelet Analysis 3rd edn. Dover Publications Inc.
74. Newton I 1687 Philosophiæ Naturalis Principia Mathematica. London.
75. Norfield D 2006 Practical Balancing of Rotating Machinery. Elsevier Science.
76. Nuttall A and Carter C 1982 Spectral estimation using combined time and lag weighting. IEEE 70(9), 1115-1125.
77. Nuttall AH 1981 Some windows with very good sidelobe behavior. IEEE Transactions on Acoustics Speech and Signal Processing 29(1), 84-91.
78. Nyquist H 2002 Certain topics in telegraph transmission theory (reprinted from Transactions of the AIEE, February 1928 617-644). Proceedings of the IEEE 90(2), 280-305.
79. Oppenheim AV and Schafer RW 1975 Digital Signal Processing. Prentice Hall.
80. Oppenheim AV, Schafer RW and Buck JR 1999 Discrete-Time Signal Processing. Pearson Education.
81. Otnes RK and Enochson L 1972 Digital Time Series Analysis. Wiley Interscience.
82. Otte D 1994 Development and evaluation of singular value analysis methodologies for studying multivariate noise and vibration problems PhD Thesis Catholic University Leuven, Belgium.
83. Otte D, de Ponseele P. V and Leuridan J 1990 Operational deflection shapes in multisource environments Proc. 8th International Modal Analysis Conference, Kissimmee, FL.
84. Pan MC and Wu CX 2007 Adaptive Vold-Kalman filtering order tracking. Mechanical Systems and Signal Processing 21(8), 2957-2969.
85. Pan MC, Liao SW and Chiu CC 2007 Improvement on gabor order tracking and objective comparison with Vold-Kalman filtering order tracking. Mechanical Systems And Signal Processing 21(2), 653-667.
86. Papoulis A 2002 Probability, Random Variables, and Stochastic Processes 4th edn. McGraw-Hill.
87. Parks TW and McClellan J 1972 Chebyshev approximation for nonrecursive digital filters with linear phase. IEEE Transactions on Circuit Theory CT19 (2), 189-194.
88. Pauwels S, Michel J, M. R, Peeters B and Debille J 2006 A new MIMO sine testing technique for accelerated, high quality FRF measurements Proc. 24th International Modal Analysis Conference, St. Louis, Missouri Society for Experimental Mechanics.
89. Pelant P, Tuma J and Benes T 2004 Vold-Kalman order tracking filtration in car noise and vibration measurements Proc. Proc. 33rd International Congress and Exposition on Noise Control Engineering, INTER-NOISE, Prague, Czech Republic.
90. Phillips A Wand Allemang RJ 2003 An overview ofMIMO-FRF excitation/averaging/processing techniques. Journal of Sound and Vibration 262(3), 651-675.
91. Pintelon R and Schoukens J 1990 Real-time integration and differentiation of analog-signals by means of digital filtering. IEEE Transactions on Instrumentation And Measurement 39(6), 923-927.
92. Pintelon R, Peeters B and Guillaume P 2008 Continuous-time operational modal analysis in the presence of harmonic disturbances. Mechanical Systems and Signal Processing 22(5), 1017-1035.
93. Potter R 1990a A new order tracking method for rotating machinery. Sound and Vibration 24(9), 30-34.
94. Potter R 1990b Tracking and resampling method and apparatus for monitoring the performance of rotating machines.
95. Proakis JG and Manolakis DG 2006 Digital Signal Processing: Principles, Algorithms, and Applications 4th edn. Prentice Hall.
96. Qian S 2003 Gabor expansion for order tracking. Sound and Vibration 37(6), 18-22.
97. Rabiner LR and Schafer RW 1974 On the behavior of minimax relative error FIR digital differentiators. Bell System Technical Journal 53(2), 333-361.
98. Rades M 1994 A comparison of some mode indicator functions. Mechanical Systems and Signal Processing 8(4), 459-474.
99. Randall RB 1982 Cepstrum analysis and gearbox fault-diagnosis. Maintenance Management International 3(3), 183-208.
100. Randall RB and Gao Y 1994 Extraction of modal parameters from the response power cepstrum. Journal of Sound and Vibration 176(2), 179-193.
101. Rao S 2003 Mechanical Vibrations 4th edn. Pearson Education.
102. Reljin IS, Reljin BD and Papic VD 2007 Extremely flat-top windows for harmonic analysis. IEEE Transactions on Instrumentation and Measurement 56(3), 1025-1041.
103. Rimell AN and Mansfield NJ 2007 Design of digital filters for frequency weightings required for risk assessments of workers exposed to vibration. Industrial Health 45(4), 512-519.
104. Rocklin GT, Crowley J and Vold H 1985 A comparison of H1, H2, and Hv frequency response functions Proc. 3rd International Modal Analysis Conference, Orlando, FL.
105. Saavedra PN and Rodriguez CG 2006 Accurate assessment of computed order tracking. Shock and Vibration 13(1), 13-32.
106. Schmidt H 1985a Resolution bias errors in spectral density, frequency response and coherence function measurements, i: General theory. Journal of Sound and Vibration 101(3), 347-362.
107. Schmidt H 1985b Resolution bias errors in spectral density, frequency response and coherence function measurements, iii: Application to second-order systems (white noise excitation). Journal of Sound and Vibration 101(3), 377-404.
108. Schoukens J, Rolain Y and Pintelon R 2006 Analysis of windowing/leakage effects in frequency response function measurements. Automatica 42(1), 27-38.
109. Serridge M and Licht T 1986 Piezoelectric Accelerometer and Vibration Preamplifier Handbook. Brüel & Kjær, Nærum, Denmark.
110. Shannon CE 1998 Communication in the presence of noise (reprinted from the proceedings of the IRE, vol 37, pp 10-21, 1949). Proceedings of the IEEE 86(2), 447-457.
111. Shao H, Jin W and Qian S 2003 Order tracking by discrete Gabor expansion. IEEE Transactions on Instrumentation and Measurement 52(3), 754-761.
112. Sheskin D 2004 Handbook of Parametric and Nonparametric Statistical Procedures 3rd edn. Chapman & Hall.
113. Smallwood D 1981 An improved recursive formula for calculating shock response spectra. Shock and Vibration Bulletin (51), 4-10.
114. Smallwood D 1995 Using singular value decomposition to compute the conditioned cross-spectral density matrix and coherence functions Proc. 66th Shock and Vibration Symposium, vol. 1, pp 109-120.
115. Stoica P and Sundin T 1999 Optimally smoothed periodogram. Signal Process. 78(3), 253-264.
116. Strang G 2005 Linear Algebra and its Applications 4th edn. Brooks Cole, San Diego.
117. Thrane N 1979 The discrete fourier transform and FFT analyzers. Brüel & Kjær Technical Review 1.
118. Tomlinson G and Kirk N 1984 Modal analysis and identification of structural non-linearity Proc. 2nd Int. Conf. on Rec. Adv. in Struct. Dyn., 1984, University of Southampton, pp 495-510.
119. Tran T, Claesson I and Dahl M 2004 Design and improvement of flattop windows with semi-infinite optimization Proc. The 6th International Conference on Optimization: Techniques and Applications, Ballarat, Australia.
120. Tucker S and Vold H 1990 On principal response analysis Proc. ASELAB Conf., Paris, France.
121. Tuma J 2004 Sound quality assessment using Vold-Kalman tracking filtering Seminar, Instruments and Control, Ostrava, Czech Republic.
122. Tuma J 2005 Setting the passband width in the Vold-Kalman order tracking filter Proc. 12th ICSV, Lisbon, Portugal.
123. Vold H 1986 Estimation of operating shapes and homogeneous constraints with coherent background noise Proc. ISMA 1986, International Conference on Noise and Vibration Engineering, Catholic University, Leuven, Belgium.
124. Vold H and Leuridan J 1993 High resolution order tracking at extreme slew rates Proc. SAE Noise and Vibration Conference, Traverse City, MI Society of Automotive Engineers.
125. Vold H, Crowley J and Nessler J 1988 Tracking sine waves in systems with high slew rates Proc. 6th International Modal Analysis Conference, Kissimmee, FL, pp 189-193.
126. Vold H, Mains M and Blough J 1997 Theoretical foundation for high performance order trackingwith theVold-Kalman tracking filter Proc. 1997 Noise and Vibration Conference, SAE, vol. 3, pp 1083-1088.
127. Welch P 1967 The use of fast Fourier transform for the estimation of power spectra: Amethod based on time averaging over short, modified periodograms. IEEE Trans. on Audio and Electroacoustics AU-15(2), 70-73.
128. White PR, Tan MH and Hammond JK 2006 Analysis of the maximum likelihood, total least squares and principal component approaches for frequency response function estimation. Journal of Sound and Vibration 290(3-5), 7.
129. Wicks A and Vold H 1986 The Hs frequency response estimator Proc. 4th International Modal Analysis Conference, Los Angeles, CA.
130. Williams R and Vold H 1986 Multiphase-step-sine method for experimental modal analysis. International Journal of Analytical and Experimental Modal Analysis 1(2), 25-34.
131. Williams R, Crowley J and Vold H 1985 The multivariate mode indicator function in modal analysis Proc. 3rd International Modal Analysis Conference, Orlando, FL.
132. Wirsching PH, Paez TL and Ortiz H 1995 Random Vibrations: Theory and Practice. Wiley Interscience.
133. Wise J 1983 The effects of digitizing rate and phase distortion errors on the shock response spectrum Proc. Institute of Environmental Sciences, Annual Technical Meeting, 29th, April 19-21, Los Angeles, CA.
134. Wowk V 1991 Machinery Vibration: Measurement and Analysis. McGraw-Hill.
135. Zwillinger D (ed.) 2002 CRC Standard Mathematical Tables and Formulae 31st edn. Chapman & Hall.