Kinematic Geometry of Gearing

Kinematic Geometry of Gearing

Volumn , Issue , 2012, Pages

  Dooner, David B ^a  

^a UNIVERSITY OF PUERTO RICO   (Puerto Rico)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891583367     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119942474     Document Type: Book

References (194)

1. Ali Raad Hassan, 2009, "Contract stress analysis of spur gear teeth pair," World Academy of Science, Engineering and Technology, Vol. 58, pp. 611-616.
2. Al-Sabeeh, A.K., 1991, "Irregular gears for cyclic speed variation," Mechanisms and Machine Theory, Vol. 16, No. 2, pp. 171-183.
3. Ananthasuresh, G.K., 2004, "Cams in microelectromechanical systems," Cam Design Handbook, H.A. Rothbart, Ed., Chapter 15, pp. 505-528, McGraw-Hill Handbooks, New York.
4. Angeles, J., 2003, Fundamentals of Robotic Mechanical Systems, 2nd Edn., Springer, New York.
5. Anton, H., 1984, Elementary Linear Algebra, 4th Edn., John Wiley & Sons, New York.
6. Archard, J.F., 1953, "Contact and rubbing of flat surface," Journal of Applied Physics, Vol. 24, No. 8, pp. 981-988.
7. Archard, J.F. and Rowntree, R.A., 1988, The temperature of rubbing bodies; Part 2, the distribution of temperatures, Wear, Vol. 128, pp. 1-17.
8. Ball, R.S., 1900, A Treatise on the Theory of Screws, Cambridge University Press, London, England.
9. Bär, G., 1999, "Accurate tooth contact determination and optimization for hypoid bevel gears using automatic differentiation," Fourth World Congress on Gearing and Power Transmission, CNIT-PARIS, Vol. 1, pp. 519-529.
10. Bär, G., 2003, "Explicit calculation methods for conjugate profiles," Journal of Geometry and Graphics, Vol. 7, No. 2, pp. 201-210.
11. Barkah, D., Shafiq, B., and Dooner, D., 2002, "A method of 3D mesh generation for spiral non-circular gear pairs," ASME Journal of Mechanical Design, Vol. 124, pp. 313-319.
12. Baxter, M.L. Jr., 1962, Gear Handbook, Chapter 1, D. Dudley, Ed., McGraw-Hill, New York.
13. Beggs, J.S., 1959, Ein Beitrag zur Analyse räumlicher Mechanismen. Dr.-Ing. Dissertation, Technische Hochschule Hannover, Hanover, Germany.
14. Benford, R.L., 1968, "Customized motions," Machine Design, September, pp. 151-154.
15. Blankenship, G.W. and Kahraman, A., 1995, "Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity," Journal of Sound and Vibration, Vol. 185, No. 5, pp. 743-765.
16. Blok H., 1937, "Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions," Proceedings of the Institute of Mechanical Engineers General Discussion of Lubrication, Institute of Mechanical Engineers, London, Vol. 2, pp. 222-235.
17. Bloomfield, B., 1960, "Noncircular gears," Product Engineering, March, pp. 59-66.
18. Bottema, O. and Roth, B., 1979, Theoretical Kinematics, North Holland Publishing, Amsterdam, Holland.
19. Brand, L., 1947, Vector and Tensor Analysis, John Wiley & Sons, New York.
20. Brecher, C., Tobias, S., and Gacka, A., 2007, "Simulation model for the emulation of the dynamic behavior of bevel gears," AGMA Fall Technical Meeting, October 7-9, Detroit, MI.
21. Buckingham, E., 1949, Analytical Mechanics of Gears, McGraw-Hill, New York; republished by Dover Publication, 1963.
22. Budynas, R.G. and Nisbett, J.K., 2011, Shigley's Mechanical Engineering Design, 9th Edn., McGraw Hill, New York.
23. Cameron, A., 1966, Basic Lubrication Theory, Ellis Horwood Chichester, England.
24. Chakraborty, J. and Dhande, S.G., 1977, Kinematics and Geometry of Planar and Spatial Cam Mechanisms, Halsted Press, John Wiley & Sons, New York.
25. Chang, H.L. and Tsai, Y.C., 1992, "A mathematical model of parametric tooth profiles for spur gears," ASME Journal of Mechanical Design, Vol. 114, pp. 8-16.
26. Chen Chih-Hsin, 1978, "On theory of conjugate surfaces," Proceedings of the World Symposium on Gears and Transmissions, IFToMM-JUDKO-KO, Vol. A, pp. 119-132.
27. Chironis, N., 1991, Mechanisms and Mechanical Devices Sourcebook, McGraw-Hill, New York.
28. Cleghorn, W.L. and Shaw, E.C., 1987, "Computer analysis of continuously variable transmission using non-circular gears," Transactions of CSME, Vol. 11, No. 2, pp. 113-120.
29. Colbourne, J.R., 1987, The Geometry of Involute Gears, Springer-Verlag, New York; Woodbine, NJ.
30. Coleman, W., 1980, "Bevel and hypoid gear surface durability: pitting and scuffing," Source book on Gear Design, Technology, and Performance, Maurice A.H. Howes, Ed., American Society for Metals, Materials Park, pp. 243-258.
31. Collins, J.A., 2003, Mechanical Design of Machine Elements and Machines, John Wiley & Sons, New York.
32. Conry, T.F. and Seireg, A., 1971, "A mathematical programming method for design of elastic bodies in contact," ASME Journal of Applied Mechanics, June, pp. 387-392.
33. Conte, S.D. and deBoor, C., 1972, Elementary Numerical Analysis, McGraw-Hill, New York.
34. Coxeter, H.S.M., 1969, Introduction to Geometry, John Wiley & Sons, New York.
35. Craig, J.J., 1986, Introduction to Robotics Mechanics and Control, Addison-Wesley Publishing Company, Reading, MA.
36. Crane, C.D. and Duffy, J., 1998, Kinematic analysis of Robotic Manipulators,Cambridge University Press, Cambridge, UK.
37. Cromwell, J.H., 1884, A Treatise on Toothed Gearing, John Wiley & Sons, New York.
38. Cunningham, F.W., 1957, "Non-circular gears," Transactions of the Fifth Congress on Mechanisms, Purdue University, West Lafayette, IN, pp. 96-103.
39. Danieli, G. and Mundo, D., 2005, "New developments in variable radius gears using constant pressure angle teeth," Mechanisms and Machine Theory, Vol. 40, No. 2, pp. 203-217.
40. Davidson, J.K. and Hunt, K.H., 2004, Robots and Screw Theory, Oxford University Press, Oxford.
41. Dawson, P.H., 1984, "Windage loss in larger high-speed gears," (ch-8, p-47) Proceedings of the Institution of Mechanical Engineers Part A: Power and Process Engineering, Vol. 198, No. 1, pp. 51-59.
42. Deitz, D., 1990, "Stereolithography automates prototyping," Mechanical Engineering, Vol. 112, No. 2, pp. 34-39.
43. Den Hartog, J.P., 1956, Mechanical Vibrations, 4th Edn., McGraw-Hill Book Company, New York.
44. Der Hovanesian, J., Erickson, M.A., Hathaway, R.B., and Savoyard, J.P., Jr., 1989, "Gear root stress optimization using photoelastic optimization techniques," SAE Transactions, Vol. 97, No. 4, pp. 748-755. (http:// papers.sae.org/880665)
45. Diab, Y., Ville, F., Velex, P., and Changenet, C., 2004, "Windage losses in high speed gears-preliminary experimental and theoretical results," ASME Journal of Mechanical Design, Vol. 126, pp. 903-908.
46. Dickrell, D.J., Dooner, D.B., and Sawyer, W.G., 2003, "The evolution of geometry for a wearing circular cam analytical and computer simulation with comparison to experiment," ASME Journal of Tribology, Vol. 125, pp. 187-192.
47. Dimentberg, F. and Shor, J., 1940, "Bennet's mechanism," USSR Academy of Sciences, Journal of Applied Mechanics, Vol. 4, No. 3 (in Russian).
48. Doege, E., Meinen, J., Neumaier, T., and Schaprian, M., 2001, "Numerical design of a new forging press drive incorporating non-circular gears," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, April, 2001; Vol. 215, No. 4, pp. 465-471.
49. Dooner, D.B., 1997, "Use of non-circular gears to reduce torque and speed fluctuations in rotating shafts," ASME Journal of Mechanical Design, Vol. 119, pp. 299-306.
50. Dooner, D.B., 2001a, "Function generation utilizing an 8-Bar linkage and optimized noncircular gear elements with application to automotive steering," Institution of Mechanical Engineers, Part C, July.
51. Dooner, D.B., 2001b, "On the generalized contact stress," International Journal of Gearing and Transmissions, Issue 3, pp. 99-105, IFToMM Gearing TC/The Nottingham Trent University.
52. Dooner, D.B., 2001c, "Design formulas for predicting contact stress," Gear Technology, pp. 32-37, Randall Publishing, Randall Publishing, Elk Grove Village, IL.
53. Dooner, D.B., 2005, "Efficiency in spatial gearing," 21th International ASME Power Transmission and Gearing Conference, September 20-24, Long Beach, CA.
54. Dooner, D.B. and Griffis, M.W., 2007, "On Spatial Euler-Savary Equation for Envelopes," ASME Journal of Mechanical Design, Vol. 129, No. 8, pp. 865-875.
55. Dooner, D.B. and Santana, R.A., 2001, "Gear parameters for specified deflections," ASME Journal of Mechanical Design, Vol. 123, No. 3, pp. 416-421.
56. Dooner, D.B. and Seireg, A., 1993, "Gear System for Motion Transformation," US patent 5201690.
57. Dooner, D.B. and Seireg, A.A., 1995, The Kinematic Geometry of Gearing, John Wiley & Sons, New York.
58. Dooner, D.B. and Seireg, A., 1996, "Synthesis of non-circular gears for a continuously variable transmission," Proceedings of the International Congress-Gear Transmissions' 96, Poznan, Poland, pp. 38-45.
59. Dooner, D.B. and Seireg, A., 1998, "Concurrent engineering of toothed bodies for generalized function transmission," ASME PTG Conference, Sept. 13-16, Atlanta GA, DETC98/PTG-5780.
60. Dooner, D.B. and Seireg, A., 1999, "An interactive approach to the integrated design and manufacture of gears," 4th World Congress on Gearing and Power Transmission, March 16-18, CNIT-Paris France, Vol. 1, pp. 317-322.
61. Dowson, D. and Higginson, G.R., 1966, Elastro-hydrodynamic Lubrication - The Fundamentals of Roller and Gear Lubrication, Pergaman Press, Oxford.
62. Drago, R., 1988, Fundamentals Gear Design, Butterworth Publishers, Stoneham, MA.
63. Dudley, D.W., 1969, The Evolution of the Gear Art, American Gear Manufacturers Association, Washington, DC.
64. Dudley, D.W., 1984, Handbook of Practical Gear Design, 2nd Edn. McGraw-Hill, New York.
65. Dudley, D.W., 1994, Handbook of Practical Gear Design, Technomic Publishing Company, Lancaster, PA.
66. Dyson, A., 1969, A General Theory of the Kinematics and Geometry of Gears in Three Dimensions, Clarendon Press, Oxford, England.
67. Dyson, A., 1970, "Frictional Traction and Lubricant Rheology in Elastohydrodynamic Lubrication," Phil. Trans. Roy. Soc. Lond., Vol. 266, No. 1170.
68. Eastwick, C.N. and Johnson, G., 2008, "Gear windage: a review," Journal of Mechanical Design, Vol. 130, 6 pp.
69. Edge, W.L., 1931, The Theory of Ruled Surfaces, Cambridge University Press, Cambridge, England.
70. Edman, A.G. and Sandor, G.N., 1997, Mechanism Design, 3rd Edn., Prentice Hall, New Jersey.
71. Eisenhart, L.P., 1909, A Treatise on the Differential Geometry of Curves and Surfaces, The Athenaum Press, Ginn and Co., London.
72. Erdman, A.G. and Sandor, G.N., 1997, Mechanism Design, Vol. 1, 3rd Edition, Prentice Hall, NJ.
73. Figliolini, G. and Angeles, J., 2005, "Algorithms for involute and octoidal bevel-gear generation," ASME Journal of Mechanical Design, Vol. 127, No. 4, pp. 664-672.
74. Figliolini, G. and Angeles, J., 2006, "The synthesis of the pitch surfaces of internal and external skew gears and their axodes," ASME Journal of Mechanical Design, Vol. 128, No. 4, pp. 794-802.
75. Figliolini, G., Lanni, C., and Ceccarelli, M., 2000, "On the kinematic synthesis of non-circular gears," Proceedings of the International Conference on Gearing, Transmissions, and Mechanical Systems, Nottingham, pp. 283-292.
76. Figliolini, G., Stachel, H., and Angeles, J., 2007, "A new look at the ball-disteli diagram and its relevance to spatial gearing," Mechanism and Machine Theory, Vol. 42, pp. 1362-1375.
77. Figliolini, G., Stachel, H., and Angeles, J., 2009, "The computational fundamentals of spatial cycloidal gearing," Proceedings of 5th International Workshop on Computational Kinematics, Duisdorf Germany, May, pp. 375-384, Springer.
78. Forder, H.G., 1950, Geometry, Harper Torchbooks, New York.
79. Freudenstein, F., 1962, "On the variety of motions generated by mechanisms," Transactions of ASME Journal of Engineering for Industry, Vol. 84, pp. 156-160.
80. Freudenstein, F. and Chen, C.K., 1988, "Variable-ratio chain drives with noncircular sprokets and minimum slacktheory and applications," Trends and Developments in Mechanism, Machines, and Robotics, Vol. 3, pp. 263-272.
81. Gabriele, G.A. and Ragsdell, K.M., 1977, "The generalized reduced gradient method: a reliable tool for optimal design," ASME Journal of Engineering for Industry, Vol. 99, pp. 394-400.
82. Gobler, H.E., 1939, "Rollcuver gears," Transactions of the ASME, Vol. 61, pp. 223-231.
83. Gonzalez-Palacios, M.A. and Angeles, J., 2000, "The novel design of a pure-rolling transmission to convert rotational into translational motion," Proceedings of DETC2000 ASME Design Engineering Technical Conferences, September 10-14, Baltimore, MD.
84. Gosselin, C., Guertin, T., Remond, D., and Jean, Y., 2000, "Simulation and experimental measurement of the transmission error of real hypoid gears under load," Journal of Mechanical Design, Vol. 122, pp. 109-122.
85. Grant, G.B., 1899, A Treatise on Gear Wheels, Grant Gear Works, Boston, MA.
86. Gregory, R.W., Harris, S.L., and Munro, R.G., 1963, "Dynamic behaviour of spur gears," Proceedings of the Institution of Mechanical Engineers, Vol. 178, Pt. 1, No. 8, pp. 207-226.
87. Griffis, M., 2003, "A study of curvature for single point contact," Mechanism and Machine Theory, Vol. 8, No. 12, pp. 1391-1411.
88. Griffis, M. and Rico, J.M., 2003, "The nut in screw theory," Journal of Robotic Systems, Vol. 20, No. 8, pp. 437-476.
89. Hain, K., 1961, "Spring mechanisms-point balancing, and spring mechanisms-continuous balancing," Spring Design and Application, McGraw-Hill, New York, pp. 268-275.
90. Hamilton, W.R., 1833, "On a new method of investigating the relations of surfaces to their normals, with results respecting the curvatures of ellipsoids," Dublin University Review, p. 653; reprinted in The mathematical papers of Sir William Rowan Hamilton, Geom Opt, Vol. 1, p. 434, 1933.
91. Hamilton, W.R., 1853, Lectures on Quaternoins, Hodges and Smith, Dublin.
92. Hestenes, D., 2001, Old wine in new bottles: a new algebraic framework for computational geometry. Geometric Algebra with Applications in Science and Engineering, E. Bayro-Corrochano and G. Sobcyzk, Eds. pp. 1-16 Birkhauser, Boston, MA.
93. Holditch, H., 1842, "On rolling curves," Transactions of the Physics Society, London, England, No. 7, pp. 61-82.
94. Hunt, K.H., 1978, Kinematic Geometry of Mechanisms, Clarendon, Oxford, England.
95. Ilies, H. and Shapiro, V., 2000, "On Shaping with Motion," ASME Transactions Journal of Mechanical Design, Vol. 122, No. 4, pp. 567-574.
96. Incropera, F.P. and DeWitt, D. P., 1981, Fundamentals of Heat Transfer, John Wiley & Sons, New York.
97. Jaramillo, T.J., 1950, "Deflections and moments due to a concentrated load on a cantilevered plate of infinite thickness," Journal of Applied Mechanics, Vol. 17, pp. 67-72.
98. Jessop, C.M., 1903, A Treatise on the Line Complex, Cambridge University Press, Cambridge, England.
99. Jiang, Q., Gosselin, C., Jenski, K., and Masseth, J., 2008, "Simulation of hypoid gear lapping," Journal of Mechanical Design, Vol. 130, p. 112601.
100. Johnson, K.L., 1985, Contact Mechanics, Cambridge University Press, Cambridge, England.
101. Kalker, J.J., 1990, Three-Dimensional Elastic Bodies in Rolling Contact, Kluwer Academic Publishers, The Netherlands.
102. Karger, A. and Novák, J., 1985, Space Kinematics and Lie Groups, Translated by Michal Basch, Gordon and Breach Science Publishers, Montreux, Switzerland.
103. Katori, H., 1988, "Planetary gear having non-circular gears," US Patent 4,788,891.
104. Katori, H., Nagahore, H., Ando, T., and Yoshino, K., 1983, "Development of CNC gear shaper capable of noncircular gear cutting," Bulletin Japan Society of Precision Engineers, Vol. 17, No. 4, pp. 283-284.
105. Konstantinov, M.S. and Galabov, W.B., 1977, "Method of manufacturing non-circular gear," ASME Paper 77-DET- 177.
106. Kowalczyk, L. and Urbanek. S., 2003, "The geometry and kinematics of a toothed gear of variable motion," Fibres & Textiles in Eastern Europe, July/September, Vol. 11, No. 3(42), pp. 60-62.
107. Lemanski, A.J., 2006, "Variable speed power transmission system," US patent 7147583, B6.
108. Lévai, Z., 1968, "Structure and analysis of planetary gear trains," Journal of Mechanisms, Vol. 3, pp. 131-148.
109. Lim, T.C. and Cheng, Y., 1999, "A theoretical study of the effect of pinion offset on the dynamics of hypoid geared rotor system," Journal of Mechanical Design, Vol. 121, pp. 594-601.
110. Lipkin, H. and Duffy, J., 1985, "The elliptic polarity of screws," ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 107, pp. 377-387.
111. Litvin, F.L., 1956, Theory of Gearing, 1st Edn., Nauka, Moscow (in Russian).
112. Litvin, F.L., 1994, Gear Geometry and Applied Theory, Prentice Hall, Englewood Cliffs, NJ.
113. Litvin, F.L., 1997, Development of Gear Technology and Theory of Gearing, NASA Ref. 1406, Lewis Research Center, Cleveland, OH.
114. Liu, H.P., Qui, S.T., Gan, Y., Zhang, H., and De, J-Y, 2002, "Development of mechanical drive type non-sinusoidal oscillator for continuous casting of steel," Ironmaking and Steelmaking, Vol. 29, No. 3, pp. 180-184.
115. Liu, J.Y., Chang, S.L., and Mundo, D., 2006, "Study on the use of a non-circular gear trains for the generation of figure-8 patterns," Proceedings of the ImechE, Part C: Journal of Mechanical Engineering Science, Vol. 220, pp. 1229-1236.
116. Liu, Q., 2002, Friction in Mixed and Elastrohydrodynamic Lubricated Contacts Including Thermal Effects, PhD dissertation, University of Twente, the Netherlands.
117. Lubkin, J.L., 1962, "Contact problems," Handbook of Engineering Mechanics, W. Flügge, Ed., McGraw-Hill, New York.
118. Lunin, S., 2001, "Newmethod of gear geometry calculation," MPT2001-Fukuoka The JSME International Conference on Motion and Power Transmissions, November 15-17, Fukuoka, Japan, pp. 472-477.
119. Martin, G.H., 1969, Kinematics and Dynamics of Machines, McGraw-Hill, New York.
120. McCarthy, J.M., 1990, Introduction to Theoretical Kinematics, MIT Press, Cambridge, MA.
121. McCarthy, J.M. and Roth, B., 1981, "The curvature theory of line trajectories in spatial kinematics," ASME Journal of Mechanical Design, Vol. 103, pp. 718-724.
122. McPhate, A.J., 1966, "Function generation with band mechanisms," Journal of Mechanisms, Vol. 1, pp. 86-94.
123. Meirovitch, L., 2001, Fundamentals of Vibrations, McGraw-Hill, New York.
124. Merritt, H.E., 1971, Gear Engineering, Pitman and Sons Publishing, London.
125. Miller, S.M., 2003, "Kinematics of meshing surfaces using geometric algebra," DETC'03, Vol. 3.
126. Minkof-Petrof, K., 1983, "Automated technological synthesis of spatial gearing," Proceedings of the 6th World Congress on Theory of Machines and Mechanisms, New Delhi, India, pp. 807-810.
127. Müller, H.W., 1982, Epicyclic Drive Trains, Wayne State University Press, Detroit, MI, December 15-20.
128. Mundo, D., 2006, "Geometric design of a planetary gear train with non-circular gears," Mechanism and Machine Theory, Vol. 41, pp. 456-472.
129. Mundo, D., Gatti, G., and Dooner, D.B., 2009, "Optimized five-bar linkage with non-circular gears for exact path generation," Mechanism and Machine Theory, Vol. 44, pp. 751-760.
130. Nakada, T., 1952, Involute Profile Shifted Gears, Association for Science Documents Information, Tokyo Institute of Technology, Oh-okayama, Tokyo, Japan.
131. Norton, R.L., 2001, Design of Machinery, 2nd Edn, McGraw-Hill, New York.
132. Novikov, M.L., 1956, USSR patent No. 109750, Moscow, USSR.
133. Nugent, J.G., 2001,"Variable gear assembly and method," US patent 6212967, April 10.
134. Ohwovoriole, M.S. and Roth, B., 1981, "An extension of screw theory," ASME Journal of Mechanical Design, Vol. 103, pp. 725-735.
135. Ollson, U., 1953, Non-circular Cylindrical Gears, Acta Polytechnica, Mechanical Engineering Series, No. 10, Stockholm, Sweden.
136. Ollson, U., 1959, Non-Circular Bevel Gears, Acta Polytechnica, Mechanical Engineering Series, No. 5, Stockholm, Sweden.
137. Phillips, J.R., 1984, Freedom in Machinery, Vol. 1, Cambridge University Press, London.
138. Phillips, J.R., 1990, Freedom in Machinery, Vol. 2, Cambridge University Press, London.
139. Phillips, J.R., 2003, Geared Spatial Involute Gearing, Springer, Berline.
140. Phillips, J.R. and Hunt, K.H., 1964, "On the theorem of three axes in the spatial motion of three bodies," Australian Journal of Applied Science, Vol. 15, pp. 267-287.
141. Plücker, J., 1865, "On a new geometry of space," Philosophical Transactions of the Royal Society, Vol. 155, pp. 725-791. Pump flow with Non-circular gear pairs (http://www.ovalasia.com.sg/index.php?option=displaypage&Itemid=74& op=page&SubMenu=)
142. Quintero Riaza, H.F., Cardona Foix, S., and Jordi Nebot, L., 2007, "Synthesis of an N-lobe noncircular gear using Bézier and B-spline nonparametric curves in the design of its displacement law," ASME Journal of Mechanical Design, Vol. 129, No. 9, pp. 981-985.
143. Radzevich, S.P., 2008, Kinematic Geometry of Surface Machining, CRC Press, Boca Raton, FL.
144. Rao, S.S., 1995, Mechanical Vibrations, 2nd Edn., Addison-Wesley Publishing, Reading, MA.
145. Reklaitis, G.V., Ravindran, A., and Ragsdell, K.M., 1983, Engineering Optimization Methods and Applications, John Wiley & Sons, Wiley Interscience, New York.
146. Reuleaux, F., 1876, The Kinematics of Machinery, translated by A.B.W. Kennedy, Dover Publications, New York.
147. Rosenauer, N. and Willis, A.H., 1953, Kinematics of Mechanisms, Associated General Publications, Sydney, Australia.
148. Roth, B., 1999, "Second order approximations for ruled-surface trajectories," 10th World Congress on the Theory of Machines and Mechanisms, Oulu, Finland, June 20-24.
149. Russel, T., Kelly, M., and Danis, L., 1987, Metals Engineering Quarterly, Vol. 14, 20-22.
150. Salmon, G., 1879, Analytical Geometry of Three Dimensions, Longmans Green, London.
151. Sawyer, W.G., Diaz, K.I., Hamilton, M.A., and Micklos, B., 2003, "Evaluation of a Model for the Evolution of Wear in a Scotch-Yoke Mechanism," ASME Journal of Tribology, Vol. 125, pp. 678-681.
152. Schmitz, T.L. and Smith, K.S., 2008, Machining Dynamics, Springer, New York.
153. Seireg, A.A., 1998, Friction and Lubrication in Mechanical Design, Marcel-Dekker, New York.
154. Selig, J.M., 2005, Geometric Fundamentals of Robotics, 2nd Edn., Springer, London.
155. Sharif, K.J., Evans, H.P., Snidle, R.W., Barnett, D. and Egorov, I.M., 2006, "Effect of elastohydrodynamic film thickness on a wear model for worm gears," Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 220, pp. 295-306.
156. Sharpsteen, J.T., 1981, "Photochemical machining of gears," Machine Design, Vol. 12, pp. 107-111.
157. Shigley, J.E., and Mischke, C.R., 2001, Mechanical Engineering Design, 6th Edn., McGraw-Hill, New York.
158. Shigley, J.E., and Uicker, J.J., 1980, Theory of Machines and Mechanisms, McGraw-Hill, New York.
159. Shtipelman, B.A., 1978, Design and Manufacture of Hypoid Gears, John Wiley & Sons, New York.
160. Simon, V., 1999, "The influence of misalignments on load distribution in hypoid gears," Fourth World Congress on Gearing and Power Transmission, CNIT-PARIS, Vol. 1, pp. 637-649.
161. Skreiner, M., 1966, "A study of the geometry and the kinematics of instantaneous spatial motion," Journal of Mechanisms, Vol. 1, pp. 115-143.
162. Smith, J.D., 1983, Gear and their Vibration, Marcel-Dekker, New York.
163. Smith, J.D., 1999, Gear Noise and Vibration, Marcel-Dekker, New York.
164. Spotts, M.F., 1964, Mechanical Design Analysis, Prentice Hall, Englewood Cliffs, NJ.
165. Stachel, H., 2000, "Instantaneous spatial kinematics and the invariants of axodes," Ball 2000 Symposium, Cambridge, England, July 9-11.
166. Stadtfeld, H.J., 1993, Handbook of Bevel and Hypoid Gears, Rochester Institue of Technology, Rochester, NY.
167. Stadtfeld, H.J., 1995, Manufacturing, Inspection and Optimization Collected Papers, The GleasonWorks, Rochester, NY.
168. Struik, D.J., 1961, Lectures on Classical Differential Geometry, Addison-Wesley Publishing, Reading, MA; republished by Dover Publication, Meneola, NY, 1988.
169. Sugimoto, M., Maruyama, N., Naruyama, A., and Hitomi, M., 1991, "Effect of tooth contact and gear dimensions on transmission errors of loaded hypoid gears," Journal of Mechanical Design, Transaction of the ASME, Vol. 113, pp. 182-187.
170. Symm, G.T., 1967, "Surface temperatures of two rubbing bodies," The Quarterly Journal of Mechanics and Applied Mathematics, Vol. 20, pp. 381-391.
171. Tallian, T.E., 1964, "Lubricant Films in Rolling Contact of Rought Surfaces," ASLE Transactions, Vol. 7, No. 2, pp. 109-126.
172. Tesar, D. and Matthew, G.K., 1976, The Dynamic Synthesis, Analysis, and Design of Modeled Cam Systems, Lexington Books, Lexington, MA.
173. Thomson, W.T., 1998, Theory of Vibration with Applications, 5th Edn., Prentice Hall, Englewood Cliffs, NJ.
174. Timoshenko, S.P. and Goodier, J.N., 1970, Theory of Elasticity, McGraw-Hill, New York.
175. Tlusty, J., 2000, Manufacturing Processes and Equipment, Prentice Hall, Upper Saddle River, NJ.
176. Townsend, D.P., 1991, Dudley's Gear Handbook, editor, 2nd Edn. McGraw-Hill, New York.
177. Tuplin, W.A., 1961, Gear Load Capacity, John Wiley & Sons, New York.
178. Vanderplaats, G.N., 1984, Numerical Optimization Techniques for Engineering Design: With Applications, McGraw- Hill, New York.
179. Veblen, O. and Young, J.W., 1910, Projective Geometry, Ginn, Boston, MA.
180. Wang, K.L. and Cheng, H.S., 1981, "Numerical solution to the dynamic load, film thickness, and surface temperatures in spur gears-1,2," ASME Journal of Mechanical Design, Vol. 103, No. 4, pp. 177-194.
181. Wang, X.C. and Ghosh, S.K., 1994, Advanced Theories of Hypoid Gears, Elsevier, Amsterdam.
182. Weatherburn, C.E., 1927, Differential Geometry of Three Dimensions, Vol. 1, Cambridge University, Cambridge, England.
183. Wellauer, E.J. and Seireg, A., 1960, "Bending strength of gear teeth by cantilever-plate theory," ASME Journal of Engineering for Industry, Vol. 82, Series B, No. 3, pp. 213-222.
184. Wilcox, L. and Coleman, W., 1973, "Application of finite elements to the analysis of gear tooth stresses," Journal of Engineering for Industry, Vol. 95, pp. 1139-1148.
185. Wildhaber, E., 1946a, "Basic relationship of hypoid gears," American Machinist, Vol. 90, No. 4, pp. 108-111.
186. Wildhaber, E., 1946b, "Basic relationship of hypoid gears-II," American Machinist, Vol. 90, No. 5, pp. 131-134.
187. Wildhaber, E., 1946c, "Basic relationship of hypoid gears-III," American Machinist, Vol. 90, No. 6, pp. 132-135.
188. Wildhaber, E., 1946d, "Conjugate pitch surfaces," American Machinist, Vol. 90, No. 13, pp. 150-152.
189. Wildhaber, E., 1946e, "Gear tooth sliding," American Machinist, Vol. 90, No. 15, pp. 106-110.
190. Wildhaber, E., 1946f, "Skew hypoid gears," American Machinist, Vol. 90, No. 16, pp.104-106.
191. Wildhaber, E., 1956, "Surface Curvature," Production Engineering, Vol. 27, pp. 184-191.
192. Williams, V.A., 1981, "Wirecut EDM can cut it," Production, pp. 72-75.
193. Wu, D. and Luo, J., 1992, A Geometric Theory of Conjugate Tooth Surfaces, World Scientific Publishing, NJ.
194. Yang, A.T., Kirson, Y., and Roth, B., 1975, "On a kinematic curvature theory for ruled surfaces," Proceedings of the Fourth World Congress on the Theory of Machines and Mechanisms, NewCastle-upon-Tyne, UK, September 8-12, pp. 737-742.