The Automotive Body Manufacturing Systems and Processes

The Automotive Body Manufacturing Systems and Processes

Volumn , Issue , 2011, Pages

  Omar, Mohammed A ^a  

^a CLEMSON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891578322     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119990888     Document Type: Book

References (67)

1. Hitomi, Katsundo (1996) Manufacturing Systems Manufacturing, London: Taylor and Francis.
2. Omar, M.A., Kurfess, T., Mears, L., and Kiggans, R. (2009) "Organizational learning in the automotive manufacturing; a strategic choice," Journal of Intelligent Manufacturing, ISSN 0956-5515, DOI 10.1007/s10845-009-0330-6.
3. Automotive News (2004) Market Data Book.
4. Xu, Yanwu (2006) Modern Formability; Measurement, Analysis, and Applications, Cincinnati, OH: Hanser Gardner.
5. Keeler, S.P., Backofen, W.A. (1963) ASM Trans. Q., 56, 25-48.
6. Goodwin, G.M. (1968) "Application of strain analysis to sheet metal forming problems in the press shop", La Metallurgica, 60, 767-774.
7. Yoshida, K. (1993) Handbook of Ease Or Difficulty in Press Forming, translated from Japanese, National Center for Manufacturing Science, Inc., Ann Arbor, MI.
8. Greene, William H. Maximum likelihood estimation of stochastic frontier production models, ASTM E 646.
9. Davies, G. (2003) Materials for the Automobile Bodies, Oxford: Elsevier Butterworth Heinemann.
10. American Iron and Steel Institute (2003) "Formability characterization of a new generation of high strength steel", American Iron and Steel Institute Reports, March 2003, available at www.steel.org [accessed on August 5, 2010].
11. American Iron and Steel Institute (2001) "Characterization of Fatigue and Crash Worthiness of New Generation of High Strength Steel FOR Automotive Applications (Phase I and Phase II)," American Iron and Steel Institute Reports, January 2001, available at www.steel.org [accessed on August 5, 2010].
12. Aluminum Association (1998) Aluminum Automotive Extrusion Manual, Publication AT6, Washington, DC: Author.
13. Cantor, Brian, Grant, Patrick, Johnston, Colin (2008) Automotive Engineering, Lightweight, Functional and Novel Materials, New York: Taylor & Francis.
14. Kaufman, J., Gilbert, P. (2000) Introduction to Aluminum Alloys and Tempers, The Aluminum Association Inc, published by the ASM International Materials Park, OH.
15. European Aluminum Association (2004) "Aluminum in commercial vehicles," Brussels, Belgium, available at www.eaa.net [accessed on August 5, 2010].
16. Boljanovic, V. (2004) Sheet Metal Forming Processes and Die Design, New York: Industrial Press.
17. Aoki, Itrau, Horita, Takashi, Herari, Toshio (1981) "Formability and applications of galvanized sheet steels", Proc. Materials/Metal Working Technology Conference, American Society of Metals, Michigan, April.
18. Automotive Steel Partnership Report (2001) "Tailor Welded Blank Applications and Manufacturing," June, available at www.a-sp.org [accessed on August 5, 2010].
19. Auto Steel Partnership Report (2001) "Blank Applications and Manufacturing," June available at www.a-sp.org [accessed on August 5, 2010].
20. Koç, Muammer (2008) Hydro-forming for Advanced Manufacturing, Boca Raton, FL: CRC Press.
21. Klaas, F. (1997) "Innovations in high-pressure hydro-forming", Proc 2nd Int Conf on Innovations in Hydroforming Tech, Columbus OH, 1-31.
22. Automotive Steel Partnership Report (1999) "Automotive body measurement system capability," available at www.a-sp.org [accessed on August 5, 2010].
23. Automotive Steel Partnership Report (2002) Automotive Steel Design Manual, available at www.a-sp.org [accessed on August 5, 2010].
24. Carey, Howard. (1995) Arc Welding Automation, New York: Marcel Dekker.
25. Omar, M.A., Kuwana, K., Saito, K., Couch, C. (2007) "Thermography for investigating industrial welding fires in automotive stations," Journal of Fire Technology, 43 (4): 319-329.
26. Kalpakjian, Serope, Schmid, Steven (2000) Manufacturing Engineering and Technology, New Jersey: Prentice Hall.
27. Dickerson, D.W., Natale, T.V. (1981) "The effect of sheet surface on spot weldability, materials/metal," Proc. Working Technology Conference, American Society of Metals. Michigan, April
28. Adams, A.D. (2005) Adhesive Bonds: Science and Technology, Cambridge: CRC Press.
29. Cordes, E. (2003) "Adhesives in the automotive industry", in A. Pizzi, K. Mittal (Eds.), Handbook of Adhesive Technology, second edition, New York, Marcel Dekker, pp. 999-1015.
30. Petrie, J. (2000) Handbook of Adhesives and Sealants, New York: McGraw-Hill.
31. Zisman W.A. (1964) Contact Angle, Wettability and Adhesion, American Chemical Society.
32. Nara, K.R., Omar, M.A. (2009) "Sensitivity analysis of non-load bearing 2K epoxy adhesive to hemming process variations, thermo-gravimetric, differential scanning calorimetry and FTIR analyses," Journal of Progress in Organic Coatings, 65, 104-108.
33. Messler, R.W. Jr. (1993) Principles of Welding: Processes, Physics, Chemistry, and Metallurgy, New York: John Wiley and Sons, Inc.
34. Messler, R.W. Jr. (1999) Joining of Advanced Materials, New York: Butterworth-Heinemann.
35. Roobol, N. (2003) Industrial Painting and Powder-coating; Principles and Practices, Cincinnati, OH: Hanser Gardner.
36. Lou, H.H., Huang, Y.L. (2000) "Integrated modeling and simulation for improved reactive drying of clearcoat," Industrial Engineering Chemistry Res. 39: 500.
37. Xiao, Jie., Jia Li, Helen, Lou, H., Huang, Yinlun (2006) "Cure-window-based proactive quality control in topcoat curing", Industrial Engineering Chemistry Res, 45: 2351-2360.
38. Zeng, F., Ayalew, B., Omar, M.A. (2008) "Robotic automotive paint curing using thermal signature feedback", Journal of Industrial Robotics, 36 (4): 389-395.
39. Hunter, Harold (1987) The Measurement of Appearance, New York: John Wiley Inter-science.
40. Graedel, Thomas, Allenby, Braden (1995) Industrial Ecology, New Jersey: Prentice Hall.
41. Clarke, G. (2005) Automotive Production Systems and Standardization, from Ford to the Case of Mercedes-Benz, Heidelberg: Physica-Verlag.
42. Galitsky, C., Worrell, E. (2003) Energy Efficiency Improvement and Cost Saving Opportunities for the Vehicle Assembly Industry, Ernest Orlando Lawrence Berkeley National Laboratory, Environmental Energy Technologies Division.
43. Patil, Y., Seryak, J., Kissock, K., Kissock, K. (2003) "Benchmarking approaches: an alternate method to determine best practice by examining plant-wide energy signature," ACEEE Summer Study on Energy-Efficiency in Industry, www.aceee.org [accessed January, 5, 2010].
44. Ross, M., Thimmapuran, P. (1993) "Long term industrial energy forecasting LIEF model", Argonne National Laboratory. www.transportation.anl.gov [accessed July 20, 2009].
45. Automotive Parts Manufacturer Association APMA, technical publications (2000), Obtained through the internet: www.apma.ca [accessed May 15, 2009].
46. Graedel, Thomas, Allenby, Braden (1997) Industrial Ecology and the Automobile, New Jersey: Prentice Hall.
47. Stodolsky, F., Vyas, A., Cuenca, R., Gaines, L. (1995) "Life cycle energy savings potential from Aluminum Intensive Vehicles," Proc. Total Life Cycle Conference and Exposition, October 16-19, 1995. Vienna, Austria.
48. Greene (1993) Journal of Econometrics Volume 18, Issue 2, February 1982, Pages 285-289.
49. Hicks, T., Dutrow, E. (2001) "Energy performance benchmarking for manufacturing plants." ACEEE 2001 Summer Study on Energy-Efficiency in Industry. www.aceee.org [accessed May 10, 2009].
50. Boyd, G. (2005) Development of a Performance-based Industrial Energy Efficiency Indicator for Automobile Assembly Plants, Chicago: Argonne National Laboratory, Decision and Information Sciences Division.
51. Kissock, K., Seyak J. (2004) "Lean energy analysis: identifying, discovering and tracking energy savings potential," Proceedings of Society of Manufacturing Engineers: Advanced Energy and Fuel Cell Technologies Conference, Livonia, MI, Oct. 11-13
52. Kissock, K. and Eger, C. (2006) "Measuring Plant-wide Industrial Energy Savings", Society of Automotive Engineers World Congress and Exposition, Detroit, MI, April 3-6.
53. IISI (1994) "Competition between steel and aluminum for the passenger car," International Iron and Steel Institute IISI report (1994) Brussels. www.worldstainless.org [accessed June, 10 2009].
54. Klobucar, J. (2004) "Improving energy efficiency of automotive paint shops", Painting Technology Workshop, Lexington, KY.
55. Newell, S. (1998) "Strategic evaluation of environmental metrics: making the use of life-cycle analysis", PhD Dissertation, MIT Department of Material Science and Engineering.
56. Peters, T. (1997) "Environmental awareness in car design", SAE publication SP-1263, Feb.
57. Hohmeyer, O., Ottinger, R.L. (eds.) (1992) Social Costs of Energy, New York: Springer Verlag.
58. Zuckerman, B., Ackerman, F. (1995) "The 1994 update of the Tellus Institute Packaging study impact assessment method," Proc. STEAC Impact Assessment Working Group Conference, Washington DC.
59. Rowe, R. (1995) The New York Externality Study, Empire State Electric Energy Research Corporation, New York: Oceana Publication.
60. Steen, B., Ryding, S.-O. (1992) The EPS enviro-accounting method. IVL Report, Göteborg, Sweden.
61. Ginley, D.M. (1994) "Material flows in the transportation industry, an example of industrial metabolism", Resources Policy, 20: 169-181.
62. Roth, R., Diffenbach, J., Issacs, J. (1998) "economic analysis of the ultra-light steel auto. body," Proceedings of the SAE IBEC, Detroit. MI.
63. Ashby, Michael, F. (2009) Materials and the Environment, Oxford: Elsevier Butterworth Heinemann.
64. Muther, R. (1973) Systematic Layout Planning, 2nd edition, Boston: Cahners Books.
65. Knox, Agnew (1998) The Geography of the World Economy, 3rd edition, London: Arnold.
66. Shingo, Shigeo, Dillon, Andrew (1989) A Study of the Toyota Production System: From an Industrial Engineering Viewpoint, Portland, OR: Productivity Press.
67. Shingo, Shigeo (1986) Zero Quality Control, Source Inspection and the Poke-Yoke System, Portland, OR: Productivity Press.