Guided Waves in Structures for SHM: The Time-Domain Spectral Element Method

Guided Waves in Structures for SHM: The Time-Domain Spectral Element Method

Volumn , Issue , 2012, Pages

  Ostachowicz, Wieslaw ^a   Kudela, Pawel ^a   Krawczuk, Marek ^a   Zak, Arkadiusz ^a  

^a POLISH ACADEMY OF SCIENCES   (Poland)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891571958     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781119965855     Document Type: Book

References (259)

1. Lamb, H. (1917) On waves in an elastic plate, Proceedings of the Royal Society of London, 93, 293-312.
2. Worlton, D.C. (1961) Experimental confirmation of Lamb waves at megacycle frequencies, Journal of Applied Physics, 32, 967-971.
3. Kolsky, H. (1963) Stress Waves in Solids, Dover Publications, Inc., New York.
4. Rose, J.L. (1999) Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge.
5. Giurgiutiu, V. (2007) Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Academic Press.
6. Doyle, J.F. (1997) Wave Propagation in Structures, Springer-Verlag New York, Inc., New York.
7. Achenbach, J.D. (1973) Wave Propagation in Elastic Solids, North-Holland Publishing Company, Amsterdam.
8. Pochhammer, L. (1876) Biegung des Kreiscylinders - Fortpflanzungs- Geschwindigkeit Kleiner Schwingungen in einem Kreiscylinder, Journal f ür die reine und angewandte Mathematik, 81, 33-61.
9. Chree, C. (1889) The equations of an isotropic elastic solid in polar and cylindrical coordinates, their solutions and applications, Proceedings of the Cambridge Philosophical Society. Mathematical and Physical Sciences, 14, 250-369.
10. Love, A.E. (1927) A Treatise on the Mathematical Theory of Elasticity, 4th edn, Dover Publications, New York, Dover.
11. Davis, R.M. (1948) A critical study of the Hopkinson pressure bar, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences, 240, 375-457.
12. Pao, Y.H. and Mindlin, R.D. (1960) Dispersion of flexural waves in an elastic, circular cylinder, Journal of Applied Mechanics, 27, 513-520.
13. Graff, K.F. (1991) Wave Motion in Elastic Solids, Dover Publications, New York, Dover.
14. Żak, A. and Krawczuk M. (2010) Assessment of rod behaviour theories used in spectral finite element modelling. Journal of Sound and Vibration, 329(11), 2099-2113.
15. Ralston, A. (1965) A First Course in Numerical Analysis, McGraw-Hill Book Company, New York.
16. Meeker, T.R. and Meitzler A.H. (1964) Guided wave propagation in elongated cylinders and plates, Chapter 2, in Physical Acoustics, vol. 1, Part A, Academic Press, New York.
17. Meitzler, A.H. (1965) Backward wave transmission of stress pulses in elastic cylinders and plates, The Journal of Acoustical Society of America, 38, 835-842.
18. Alippi, A., Bettucci, A. and Germano, M. (2000) Anomalous propagation characteristics of evanescent waves, Ultrasonics, 38, 817-820.
19. Marston, P.L. (2003) Negative group velocity Lamb waves on plates and applications to the scattering of sound by shells, The Journal of the Acoustical Society of America, 113, 2659-2662.
20. Bancroft, D. (1941) The velocity of longitudinal waves in cylindrical bars, Physical Review, 59, 588-593.
21. Boyd, J.P. (2000) Chebyshev and Fourier Spectral Methods, Dover Publications, Inc., New York.
22. Zienkiewicz, O.C. (1989) The Finite Element Method,McGraw-Hill Book Company, London.
23. Pozrikidis, C. (2005) Introduction to Finite and Spectral Element Methods Using MATLAB, Chapman & Hall/CRC.
24. Finlayson, B.A. (1972) The Method of Weighted Residuals and Variational Principles, with Application in Fluid Mechanics, Heat and Mass Transfer, Academic Press.
25. Ralston, A. (1965) A First Course of Numerical Analysis, McGraw-Hill Book Company, London.
26. Askey, R. (2005) The 1839 paper on permutations: its relation to the Rodrigues formula and further developments, in Mathematics and Social Utopias in France: Olinde Rodrigues and His Times (eds S.L. Altmann and E.L. Ortiz), History and Mathematics 28, American Mathematical Society, Providence, RI, pp. 105-118.
27. Kleiber, M. (1989) Incremental Finite Element Modelling in Non-linear Solid Mechanics, E. Horwood Ltd.
28. Rao, S.S. (1981) The Finite Element Method in Engineering, Pergamon Press.
29. Timoshenko, S. and Goodier, J.N. (1951) Theory of Elasticity, McGraw Hill Book Company, London.
30. Vinson, J.R. and Sierakowski, R.L. (1989) Behavior of Structures Composed of Composite Materials, Martinus-Nijhoff Inc., Dordrecht.
31. Dauksher, W. and Emery, A.F. (1997) Accuracy in modelling the acoustic wave equation with Chebyshev spectral finite elements, Finite Elements in Analysis and Design, 26, 115-128.
32. Rayleigh, J.W.S. (1945) The Theory of Sound, Dover Publications, Inc., New York.
33. Kiełbasiński, A. and Schwetlick, H. (1992) Numeryczna Algebra Liniowa, Wydawnictwo Naukowo Techniczne, Warszawa.
34. Kundu, T., Das, S., Martin, S.A. and Jata, K.V. (2008) Locating point of impact in anisotropic fiber reinforced composite plates. Ultrasonics, 48, 193-201.
35. Jeong, H. (2001) Analysis of plate wave propagation in anisotropic laminates using a wavelet transform. NDT&E International, 34, 185-190.
36. Acoustic Emission, Hsu-Nielsen source (2002) [online] Available at: http://www.ndt.net/ndtaz/content.php?id=474 (Accessed 30 June 2011).
37. Berthelot, J.-M., Souda, M.B. and Robert, J.L. (1992) Frequency response transducers used in acoustic emission testing of concrete. NDT&E International, 25(6), 279-285.
38. Wilcox, P.D. (1998) Lamb wave inspection of large structures using permanently attached transducers. PhD thesis, Imperial College of Sciences, London.
39. Rose, J.L. (2000) Guided wave nuances for ultrasonic nondestructive evaluation. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47(3), 575-583.
40. Pierce, S.G., Culshaw, B., Manson, G. et al. (2000) The application of ultrasonic Lamb wave techniques to the evaluation of advanced composite structures. Proceedings of SPIE, 3986, 93-103.
41. Su, Z. and Ye, L. (2009) Identification of Damage Using Lamb Waves. From Fundamentals to Applications, Lecture notes in applied and computational mechanics, vol. 48, Springer-Verlag.
42. Rose, J.L. (1999) Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge.
43. http://apps.isiknowledge.com (accessed 16 May 2011).
44. Park, I.-K., Kim T.-H., Kim, H.-M. et al. 2006. Evaluation of hidden corrosion in a thin plate using a non-contact guided wave technique. Key Engineering Materials, 321-323, 492-496.
45. Murayama, R. and Mizutani, K. (2002) Conventional electromagnetic acoustic transducer development for optimum Lamb wave modes. Ultrasonic, 40, 491-495.
46. Dixon, S. and Palmer, S.B. (2004) Wideband low frequency generation and detection of Lamb and Rayleigh waves using electromagnetic acoustic transducers (EMATs). Ultrasonics, 42, 1129-1136.
47. Achenbach, J.D. (2000) Quantitative nondestructive evaluation. Internal Journal of Solids and Structures, 37, 13-27.
48. Wandowski, T.,Malinowski, P. and Ostachowicz,W.M. (2011) Damage detection with concentrated configurations of piezoelectric transducers. Smart Materials and Structures, 20, 025002 (14 pp).
49. Ihn, J.-B. and Chang, F.-K. (2008) Pitch catch active sensing methods in structural health monitoring for aircraft structures. Structural Health Monitoring, An International Journal, 7(1), 5-19.
50. Lin, M. and Chang, F.-K. (2002) The manufacture of composite structures with a built-in network of piezoceramics. Composites Science and Technology, 62, 919-939.
51. Qing, P.X, Beard, S., Shen, S.B. et al. (2009) Development of a real-time active pipeline integrity detection system. Smart Materials and Structures, 18, 1-10.
52. Qing, X.P., Beard, S.J., Kumar, A. et al. (2006) Advances in the development of built-in diagnostic system for filament wound composite structures. Composites Science and Technology, 66, 1694-1702.
53. Lee, Y.S., Yoon, D.J., Lee, S.I. and Kwon, J.H. (2005) An active piezo array sensor for elastic wave detection. Key Engineering Materials, 297-300, 2004-2009.
54. Na, J.K., Blackshire, J.L. and Kuhr, S. (2008) Design, fabrication, and characterization of single-element interdigital transducers for NDT applications. Sensors and Actuators A, 148, 359-365.
55. Mustapha, F., Manson, G.,Worden, K. and Pierce, S.G. (2007) Damage location in an isotropic plate using a vector of novelty indices. Mechanical Systems and Signal Processing, 21, 1885-1906.
56. Su, Z., Ye, L. and Lu, Y. (2006) Guided Lamb waves for identification of damage in composite structures: a review. Journal of Sound and Vibration, 295, 753-780.
57. Melnykowycz, M. et al. (2006) Performance of integrated active fiber composites in fiber reinforced epoxy laminates. Smart Materials and Structures, 15(1), 204-212.
58. Melnykowycz, M. et al. (2001) Packaging of active fiber composites for improved sensor performance, Smart Materials and Structures, 19(1), 015001.
59. Wagg, D., Bond, I., Weaver, P. and Friswell, M. (2007) Adaptive Structures. Engineering Applications, JohnWiley & Sons, Ltd.
60. Kim, I.K. and Kim, Y.Y. (2007) Shear horizontal wave transduction in plates by magnetostrictive gratings. Journal of Mechanical Science and Technology, 21, 693-698.
61. Valle, C. and Littles Jr, J.W. (2002) Flaw localization using the reassigned spectrogram on laser-generated and detected Lamb modes. Ultrasonics, 39, 535-542.
62. Hongjoon, K., Kyungyoung, J., Minjea, S. and Jaeyeol, K. (2006) A noncontact NDE method using a laser generated focused-Lamb wave with enhanced defectdetectionability and spatial resolution. NDT&E International, 39, 312-319.
63. Hongjoon, K., Kyungyoung, J., Minjea, S. and Jaeyeol, K. (2006) Application of the laser generated focused-Lamb wave for non-contact imaging of defects in plate. Ultrasonics, 44, 1265-1268.
64. Payoa, I. and Hale, J.M. (2010) Dynamic characterization of piezoelectric paint sensors under biaxial strain. Sensors and Actuators A, 163, 150-158.
65. Royer, D. and Dieulesaint, E. (1999) Elastic Waves in Solids II. Generation, Acousto- Optics Interaction, Applications, Springer.
66. Thursby, G., Sorazu, B., Betz, D.C. et al. (2004) Comparison of point and integrated fiber optic sensing techniques for ultrasound detection and location of damage. Proceedings of SPIE, 5384, 287-295.
67. Takeda, N., Okabe, Y., Kuwahara, J. et al. (2005) Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing. Composites Science and Technology, 65, 2575-2587.
68. Li, F., Murayama, H., Kageyama, K. and Shirai, T. (2009) Guided wave and damage detection in composite laminates using different fiber optic sensors. Sensors, 9, 4005-4021.
69. Focke, O., Hildebrandt, A. and Von Kopylov, C. (2008) Inspection of laser generated Lamb waves using shearographic interferometry. 1st International Symposium on Laser Ultrasonics: Science, Technology and Applications, 2008, Montreal, Canada.
70. Hung, Y.Y. (1996) Shearography for non-destructive evaluation of composite structures. Optics and Lasers in Engineering, 24, 161-182.
71. Hung, Y.Y., Luo,W.D., Lin, L. and Shang, H.M. (2000) NDT of joined surfaces using digital time-integrated shearography with multiple-frequency sweep. Optics and Lasers in Engineering, 33, 369-382.
72. Lammering, R. (2010) Observation of piezoelectrically induced wave propagation in thin plates by use of speckle interferometry. Experimental Mechanics, 50(3), 377-387.
73. Staszewski,W.J., Lee, B.C., Mallet, L. and Scarpa, F. (2004) Structural health monitoring using scanning laser vibrometry: I. Lamb wave sensing. Smart Materials and Structures, 13, 251-260.
74. Swenson, E., Sohn, H., Olson, S. and Desimio, M.A. (2010) Comparison of 1D and 3D laser vibrometry measurements of Lamb waves. Proceedings of SPIE, 7650, 765003.
75. Staszewski,W.J., Lee, B.C. and Traynor, R. (2007) Fatigue crack detection in metallic structures with Lamb waves and 3D laser vibrometry. Measurement Science and Technology, 18, 727-739.
76. Rose, J.L. (1999) Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge.
77. Doyle, J.F. (1997) Wave Propagation in Structures, Springer-Verlag New York Inc., New York.
78. Achenbach, J.D (1973) Wave Propagation in Elastic Solids, North-Holland Publishing Company, Amsterdam.
79. Love, A.E. (1927) A Treatise on the Mathematical Theory of Elasticity, Dover Publications.
80. Mindlin, R.D. and Herrmann, G. (1952) A one-dimensional theory of compressiona waves in an elastic rod. Proceedings of the First U.S. National Congress of Applied Mechanics - 1951, pp. 187-191.
81. Rayleigh, J.W.S. (1945) The Theory of Sound, Dover Publications, Inc.
82. Timoshenko, S.P. (1921) On the correction factor for shear of the differential equation for transverse vibrations of bars of uniform cross-section. Philosophical Magazine, 41, 744-746.
83. Ochoa, O.O. and Reddy, J.N. (1992) Finite Element Analysis of Composite Laminates, Kluwer Academic Publishers, Dordrecht.
84. Wolfram Research: Mathematica, Technical and Scientific Software (2011) Available at: http://www.wolfram.com (accessed 30.06.2011).
85. MathWorks - MATLAB and Simulink for Technical Computing (2011) Available at: http://www.mathworks.com (accessed 30.06.2011).
86. Kudela, P., Krawczuk, M. and Ostachowicz W. (2007) Wave propagation modelling in 1D structures using spectral finite elements. Journal of Sound and Vibration, 300, 88-100.
87. Zak, A., Krawczuk, M. and Ostachowicz,W. (2006) Propagation of in-plane waves in an isotropic panel with a crack. Finite Elements in Analysis and Design, 42, 929-941.
88. Zak, A., Krawczuk, M. and Ostachowicz,W. (2006) Propagation of in-plane waves in a composite panel. Finite Elements in Analysis and Design, 43, 154-154.
89. Zak, A. and Krawczuk, M. (2010) Assessment of rod behaviour theories used in spectral finite element modelling. Journal of Sound and Vibration, 329, 2099-2113.
90. Rao, S.S. (1981) The Finite Element Method in Engineering, Pergamon Press.
91. Zienkiewicz, O.C. (1989) The Finite Element Method, McGraw-Hill, Inc.
92. Dauksher, W. and Emery, A.F. (1997) Accuracy in modelling the acoustic wave equation with Chebyshev spectral finite elements. Finite Elements in Analysis and Design, 26, 115-128.
93. Christon, M.A. (1999) The influence of the mass matrix on the dispersive nature of the semi-discrete, second-order wave equation. Computer Methods in Applied Mechanics and Engineering, 173, 147-166.
94. Wu, S.R. (2006)Lumped mass matrix in explicit finite element method for transient dynamics of elasticity. Computer Methods in Applied Mechanical Engineering, 195, 5983-5994.
95. Zak, A. (2009) A novel formulation of a spectral plate element for wave propagation in isotropic structures. Finite Elements in Analysis and Design, 45, 650-658.
96. Pozrikidis, C. (2005) Introduction to Finite and Spectral Element Methods Using MATLAB, Chapman & Hall/CRC.
97. Saruna, K.S. (1978) Lumped mass matrices with non-zero inertia for general shell and axisymmetric shell elements. International Journal for Numerical Methods in Engineering, 12, 1635-1650.
98. Zboínski, G. and Kubiak J.A. (1989) Application of the thick shell and transition elements for analysis of the long turbine blades: Part I - an algorithm. Latest Advances in Steam Turbine Design, Blading, Repairs, Condition Assessment, and Condenser Interaction, 7, 23-30.
99. Ralston A. (1965) A First Course of Numerical Analysis, McGraw-Hill, Inc.
100. Blevins, R.D. (1995) Formulas for Natural Frequency and Mode Shape, Krieger Publishing Company.
101. Shin, K. and Hammond, J.K. (2008) Fundamentals of Signal Processing for Sound and Vibration Engineers, JohnWiley & Sons, Ltd.
102. Kleiber, M. (1989) Incremental Finite Element Modelling in Non-linear Solid Mechanics, E. Horwood.
103. Krawczuk, M. (1992) Modeling and identification of cracks in truss constructions. Finite Elements in Analysis and Design, 12, 41-50.
104. Krawczuk, M. and Ostachowicz, W. (1995) Modeling and vibration analysis of a cantilever composite beam with a transverse open crack. Journal of Sound and Vibration, 183, 69-89.
105. Krawczuk, M., Ostachowicz,W. and Zak, A. (1997) Dynamics of cracked composite material structures. Computational Mechanics, 20, 79-83.
106. Krawczuk, M. and Ostachowicz, W. (1997) Natural vibrations of a clamped-clamped arch with an open transverse crack. Trans. ASME, Journal of Vibration and Acoustics, 119, 145-151.
107. Ostachowicz, W. and Krawczuk, M. (2009) Modeling for detection of degraded zones in metallic and composite structures, in Encyclopaedia of Structural Health Monitoring (eds C. Boller, F.-K. Chang and Y. Fujino), John Wiley & Sons, Ltd, pp. 851-866.
108. Lee, B.C., Palacz, M., Krawczuk, M. et al. (2004) Wave propagation in a sensor/ actuator diffusion bond model. Journal of Sound and Vibration, 276, 671-687.
109. Rose, J.L. (1999) Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge.
110. Doyle, J.F. (1997) Wave Propagation in Structures, Springer-Verlag New York Inc, New York.
111. Achenbach, J.D. (1973) Wave Propagation in Elastic Solids, North-Holland Publishing Company, Amsterdam.
112. Zak, A. Krawczuk, M. and Ostachowicz,W. (2006) Propagation of in-plane waves in an isotropic panel with a crack. Finite Elements in Analysis and Design, 42, 929-941.
113. Zak, A. Krawczuk, M. and Ostachowicz,W. (2006) Propagation of in-plane waves in a composite panel. Finite Elements in Analysis and Design, 43, 154-154.
114. Kudela, P., Zak, A., Krawczuk, M. and Ostachowicz,W. (2007) Modelling of wave propagation in composite plates using the time domain spectral element method. Journal of Sound and Vibration, 302, 728-754.
115. Zak, A. (2009) A novel formulation of a spectral plate element for wave propagation in isotropic structures. Finite Elements in Analysis and Design, 45, 650-658.
116. Love, A.E. (1927) A Treatise on the Mathematical Theory of Elasticity, Dover Publications.
117. Reddy, J.N. (2007) Theory and Analysis of Elastic Plates and Shells, CRC Press.
118. Mindlin, R.D. (1951) Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates. Trans. ASME, Journal of Applied Mechanics, 18, 31-38.
119. Ochoa, O.O. and Reddy, J.N. (1992) Finite Element Analysis of Composite Laminates, Kluwer Academic Publishers, Dordrecht.
120. Timoshenko, S. and Woinowsky-Krieger, S. (1959) Theory of Plates and Shells, McGraw-Hill Book Company, London.
121. Yang, J. and Guo, S. (2005) On using the Kane-Mindlin theory in the analysis of cracks in plates. International Journal of Fracture, 133, L13-L17.
122. Rao, S.S. (1981) The Finite Element Method in Engineering, Pergamon Press.
123. Zienkiewicz, O.C. (1989) The Finite Element Method, McGraw-Hill Book Company, London.
124. Pozrikidis, C. (2005) Introduction to Finite and Spectral Element Methods Using MATLAB, Chapman & Hall/CRC.
125. Sharma, M.D. (2008) Propagation of inhomogeneous plane waves in anisotropic viscoelastic media. Acta Mechanica, 200, 145-154.
126. Orrenius, U. and Finnveden, S. (1996) Calculation of wave propagation in ribstiffened plate structures. Journal of Sound and Vibration, 198, 203-224.
127. Williams, F.W., Ouyang, H.J., Kennedy, D. and York, C.B. (1995) Wave propagation along longitudinally periodically supported or stiffened prismatic plate assemblies. Journal of Sound and Vibration, 186, 197-205.
128. Zhang, J., Jia, L. and Shu, Y. (2002)Wave propagation characteristics of thin shells of revolution by frequency-wave number spectrum method. Journal of Sound and Vibration, 251, 367-372.
129. Haddow, J.B. and Jiang, L. (1999) Finite amplitude spherically symmetric wave propagation in a prestressed hyperelastic shell. International Journal of Solids and Structures, 36, 2793-2805.
130. Wang, X., Lu, G. and Guillow, S.R. (2002) Stress wave propagation in orthotropic laminated thick-walled spherical shells. International Journal of Solids and Structures, 39, 4027-4037.
131. Yuan, F.G. and Hsieh, C.C. (1998) Three-dimensional wave propagation in composite cylindrical shells. Composite Structures, 42, 153-167.
132. Dauksher, W. and Emery, A.F. (1997) Accuracy in modelling the acoustic wave equation with Chebyshev spectral finite elements. Finite Elements in Analysis and Design, 26, 115-128.
133. Christon, M.A. (1999) The influence of the mass matrix on the dispersive nature of the semi-discrete, second-order wave equation. Computer Methods in Applied Mechanics and Engineering, 173, 147-166.
134. Rayleigh, J.W.S. (1945) The Theory of Sound, Dover Publications Inc.
135. Krawczuk, M. (1992) Modeling and identification of cracks in truss constructions. Finite Elements in Analysis and Design, 12, 41-50.
136. Krawczuk, M. (1993) A rectangular plate finite element with an open crack. Computers and Structures, 46, 487-493.
137. Krawczuk, M. (1994) Rectangular shell finite element with an open crack. Finite Elements in Analysis and Design, 15, 233-253.
138. Ostachowicz, W. and Krawczuk, M. (2009) Modeling for detection of degraded zones in metallic and composite structures, in Encyclopedia of Structural Health Monitoring (eds C. Boller, F. Chang and Y. Fujino), JohnWiley & Sons, Ltd, Chichester, pp. 851-866.
139. Lee, B.C., Palacz, M., Krawczuk, M. et al. (2004) Wave propagation in a sensor/ actuator diffusion bond model. Journal of Sound and Vibration, 276, 671-687.
140. Ray, M.C., Bhattacharya, R. and Samanta, B. (1993) Exact solutions for static analysis of intelligent structures. AIAA Journal, 31(9), 1684-1691.
141. Tzou, H.S. and Tiersten, H.F. (1994) Elastic analysis of laminated composite plates in cylindrical bending due to piezoelectric actuators. Smart Materials and Structures, 3(3), 255-265.
142. Bisegna P. and Maceri, F. (1996) An exact three-dimensional solution for simply supported rectangular piezoelectric plate. Trans. ASME, Journal of Applied Mechanics, 63, 628-638.
143. Ray, M.C., Bhattacharya, R. and Samanta, B. (1998) Exact solutions for dynamic analysis of composite plates with distributed piezoelectric layers. Computers and Structures, 66(6), 737-743.
144. Tzou, H.S. and Tseng, C.I. (1990) Distributed piezoelectric sensor/actuator design for dynamic measurement/control of distributed parameter systems:Apiezoelectric finite element approach. Journal of Sound and Vibration, 138(1), 17-34.
145. Yao, L.Q. and Lu, L. (2003) Hybrid-stabilized solid-shell model of laminated composite piezoelectric structures under non-linear distribution of electric potential through thickness. International Journal for Numerical Methods in Engineering, 58(10), 1499-1522.
146. Fernandes, A. and Pouget, J. (2002) An accurate modelling of piezoelectric multilayer plates. European Journal of Mechanics A/Solids, 21, 629-651.
147. Mindlin, R.D. (1972) High frequency vibrations of piezoelectric crystal plates. International Journal of Solids and Structures, 8(6), 895-906.
148. Yang, J.S. (1999) Equations for thick elastic plates with partially electrode piezoelectric actuators and higher order electric fields. Smart Materials and Structures, 8(1), 73-82.
149. Saravanos, D.A., Heyliger, P.R. and Hopkins, D.A. (1997) Layerwise mechanics and finite element for the dynamic analysis of piezoelectric composite plates. International Journal of Solids and Structures, 34(3), 359-378.
150. Bisegna, P. and Caruso, G. (2001) Evaluations of higher-order theories of piezoelectric plates in bending and in stretching. Journal of Solids and Structures, 38(48-49), 8805-8830.
151. Kapuria, S. (2001) An efficient coupled theory for multilayered beams with embedded piezoelectric sensory and active layers. International Journal of Solid and Structures, 38(50-51), 9179-9199.
152. Wang, S.Y. (2004) A finite element model for the static and dynamic analysis of a piezoelectric bimorph. International Journal of Solids and Structures, 41, 4075-4096.
153. Mehrabadi, S.J., Kargarnovin, M.H. and Najafizadeh, M.M. (2009) Free vibration analysis of functionally graded coupled circular plate with piezoelectric layers. Journal of Mechanical Science and Technology, 23, 2008-2021.
154. Wu, N., Wang, Q. and Quek, S.T. (2010) Free vibration analysis of piezoelectric coupled circular plate with open circuit. Journal of Sound and Vibration, 329, 1126-1136.
155. Yang, Ch., Ye, L., Su, Z. and Bannister, M. (2006) Some aspects of numerical simulation for Lamb wave propagation in composite laminates. Composite Structures, 75, 267-275.
156. Yu, L., Bottan-Santoni, G. and Giurgiutiu, V. (2010) Shear lag solution for tuning ultrasonic piezoelectric wafer active sensors with applications to Lamb wave array imaging. International Journal of Engineering Science, 48, 848-861.
157. Ostachowicz, W. and Krawczuk, M. (2009) Modeling for detection of degraded zones in metallic and composite structures, in Encyclopedia of Structural Health Monitoring (eds C. Boller, F. Chang and Y. Fujino), JohnWiley & Sons, Ltd, Chichester, pp. 851-866.
158. Abe, M., Park, G. and Inman, D.J. (2002) Impedance-based monitoring of stress in thin structural members. Proceedings of 11th International Conference on Adaptive Structures and Technologies, pp. 285-292.
159. Giurgiutiu, V. (2007) Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Academic Press.
160. Xu, Y.G. and Liu, G.R. (2002) A modified electro-mechanical impedance model of piezoelectric actuator-sensors for debonding detection of composite patches. Journal of Intelligent Material Systems and Structures, 13(6), 389-396.
161. Kim, Y., Ha, S. and Chang, F.-K. (2008) Time-domain spectral element method for built-in piezoelectric-actuator-induced Lamb wave propagation analysis. AIAA Journal, 3, 591-600.
162. Worlton, D.C. (1961) Experimental confirmation of Lamb waves at megacycle frequencies. Journal of Applied Physics, 32, 967-971.
163. Berger, H. (1967) An ultrasonic imaging Lamb-wave system for reactor-fuel-plate inspection. Ultrasonics, 5, 3941.
164. Degertekin, F.L. and Khuri-Yakub, B.T. (1997) Lamb wave excitation by Hertzian contacts with applications in NDE. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 44, 769-779.
165. Deutsch,W.A.K., Cheng, A. and Achenbach J.D. (1997) Self-focusing of Rayleigh waves and Lamb waves with a linear phased array. Research on Nondestructive Evaluation, 9, 81-95.
166. Rose, J.L. (2000) Guided wave nuances for ultrasonic nondestructive evaluation. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47(3), 575-583.
167. Kessler, S.S., Spearing, S.M. and Soutis, C. (2002) Damage detection in composite materials using Lamb wave methods. Smart Materials and Structures, 11, 269-278.
168. Li, Z.N., Tang, J. and Li, Q.S. (2004) Optimal sensor locations for structural vibration measurements. Applied Acoustics, 65, 807-818.
169. Qiu, L. and Yuan, S. (2009) On development of a multi-channel PZT array scanning system and its evaluating application on UAV wing box. Sensors and Actuators A, 151, 220-230.
170. Cheng, J., Su, Z. and Cheng, L. (2010) Identification of corrosion damage in submerged structures using fundamental anti-symmetric Lamb waves. Smart Materials and Structures, 19, 1-12.
171. Clarke, T., Simonetti, F. and Cawley, P. (2010) Guided wave health monitoring of complex structures by sparse array systems: influence of temperature changes on performance. Journal of Sound and Vibration, 329, 2306-2322.
172. Rytter, A. (1993) Vibration based inspection of civil engineering structures. PhD Dissertation, Department of Building Technology and Structural Engineering, Aalborg University, Denmark.
173. Worden, K. and Dulieu-Barton, J.M. (2004) An overview of intelligent fault detection in systems and structures. Structural Health Monitoring, 3(1), 85-98.
174. Todd, M. and Farrar, C. (2004) Embedded PZT network for non-destructive evaluation of United Airlines aircraft fuselage skins. Course: Non-destructive evaluation (SE163), University of California, San Diego.
175. New Aircraft Repair Technique Receives FAA Certification, Delta L-1011 Returned to Trans-Atlantic Service, 1997. Available at: http://www.sandia.gov/media/faa.htm (accessed 5 July 2011).
176. Qing, X.P., Chan, H.-L., Beard, S.-J. et al. (2006) Effect of adhesive on the performance of piezoelectric elements used to monitor structural health. International Journal of Adhesion and Adhesives, 26, 622-628.
177. Lanzara, G., Yoon, Y., Kim, Y. and Chang, F.-K. (2009) Influence of interface degradation on the performance of piezoelectric actuators. Journal of Intelligent Material Systems and Structures, 20(14), 1699-1710.
178. Cawley, P. and Alleyne, D. (2004) Practical long range guided wave inspection - managing complexity. 2nd Middle East Nondestructive Testing Conference and Exhibition Proceedings, vol. 9 (2). [online] Available at: http://www.ndt.net/article/mendt03/4/4.htm.
179. Wilcox, P.D. (2003) Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 50(6), 699-709.
180. Giurgiutiu, V. (2008) Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Elsevier.
181. Malinowski, P., Wandowski, T., Trendafilova, I. and Ostachowicz, W. (2009) A phased array-based method for damage detection and localization in thin plates. An International Journal of Structural Health Monitoring, 8(1), 5-15.
182. Rajagopalan, J., Balasubramaniam, K. and Krishnamurthy, C.V. (2006) A single transmitter multi-receiver (STMR) PZT array for guided ultrasonic wave based structural health monitoring of large isotropic plate structures. Smart Material and Structures, 15, 1190-1196.
183. Wandowski, T., Malinowski, P. and Ostachowicz, W. (2011) Damage detection with concentrated configurations of piezoelectric transducers. Smart Materials and Structures, 20, 025002.
184. Matt, H.M. and di Scalea, F.L. (2007) Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures. Smart Materials and Structures, 16, 1489-1499.
185. Salas, K.I. and Cesnik, C.E.S. (2009) Guided wave excitation by a CLoVER transducer for structural health monitoring: theory and experiments. Smart Materials and Structures, 18, 1-27.
186. Degertekin, F.L. and Khuri-Yakub, B.T. (1997) Lamb wave excitation by Hertzian contacts with applications in NDE. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 44, 769-779.
187. Kessler, S.S., Spearing, S.M. and Soutis, C. (2002) Damage detection in composite materials using Lamb wave methods. Smart Materials and Structures, 11, 269-278.
188. Ihn, J.-B. and Chang, F.-K. (2008) Pitch catch active sensing methods in structural health monitoring for aircraft structures. Structural Health Monitoring, An International Journal, 7(1), 5-19.
189. Ihn, J.-B. and Chang, F.-K. (2004) Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics. Smart Materials and Structures, 13, 609-620.
190. Su, Z., Ye, L. and Lu Y. (2006) Guided Lamb waves for identification of damage in composite structures: a review. Journal of Sound and Vibration, 295, 753-780.
191. Hu, N., Shimomukai, T., Fukunaga, H. and Su, Z. (2008) Damage identification of metallic structures using A0 mode of Lamb waves. Structural Health Monitoring, 7, 271-285.
192. Malinowski, P., Wandowski, T. and Ostachowicz, W. (2008) Multi-damage localization with piezoelectric transducers. Proceedings of the 4th European Workshop on Structural Health Monitoring, pp. 716-723.
193. Ostachowicz, W. and Kudela, P. (2007) Experimental verification of the Lambwave based damage detection algorithm. Proceedings of the 6th International Workshop on Structural Health Monitoring, pp. 2066-2073.
194. Ostachowicz,W.,Wandowski, T. and Malinowski, P. (2010) Combined distributed and concentrated transducer network for failure indication. Proceedings of SPIE, 7650. DOI: 10.1117/12.846911.
195. Jin, J., Quek, S.T. andWang, Q. (2005) Design of interdigital transducers for crack detection in plates. Ultrasonics, 43, 481-493.
196. Na, J.K., Blackshire, J.L. and Kuhr, S. (2008) Design, fabrication, and characterization of single-element interdigital transducers for NDT applications. Sensors and Actuators A, 148, 359-365.
197. Carazo, A.V. (2000) Novel piezoelectric transducers for high voltage measurements. Doctoral thesis, Universitat Politecnica de Catalunya, Departament of Electrical Engineering, Barcelona.
198. Diamanti, K., Soutis, C. and Hodgkinson, J.M. (2007) Piezoelectric transducer arrangement for the inspection of large composite structures. Composites: Part A, 38, 1121-1130.
199. Masserey, B. and Fromme, P. (2009) Surface defect detection in stiffened plate structures using Rayleigh-like waves, NDT&E International, 42, 564-572.
200. Qing, X.P., Beard, S.J., Kumar, A. et al. (2006) Advances in the development of built-in diagnostic system for filament wound composite structures. Composites Science and Technology, 66, 1694-702.
201. Andrews, J.P., Palazotto, A.N., DeSimio, M.P. and Olson S.E. (2008) Lamb wave propagation in varying isothermal environments. Structural Health Monitoring, 7, 265-270.
202. Drinkwater, B.W., Konstantinidis, G. and Wilcox, P.D. (2007) An investigation into the temperature stability of a guided wave structural health monitoring system using permanently attached sensors. IEEE Sensors Journal, 7(5), 905-912.
203. Clarke, T., Simonetti, F. and Cawley, P. (2010) Guided wave health monitoring of complex structures by sparse array systems: influence of temperature changes on performance. Journal of Sound and Vibration, 329, 2306-2322.
204. Park, S., Lee, C. and Sohn, H. (2010) Reference-free crack detection using transfer impedances. Journal of Sound and Vibration, 329, 2337-2348.
205. Garcia, C.E. and Guemes, A. (2010) Compensation for temperature and static strain in Lamb wave propagation, in Proceedings of the Fifth European Workshop on Structural Health Monitoring, DEStech Publications, Inc., pp. 736-741.
206. Chen, V.C. and Ling, H. (2002) Time-frequency Transforms for Radar Imaging and Signal Analysis, Artech House.
207. Brandwood, D. (2003) Fourier Transforms in Radar and Signal Processing, Artech House.
208. Stergiopoulos, S. (2001) Advanced Signal Processing Handbook - Theory and Implementation for Radar, Sonar and Medical Imaging Real Time Systems, CRC Press.
209. Kahrs, M. and Brandenburg, K. (2002) Applications of Digital Signal Processing to Audio and Acoustics, Kluwer Academic Publishers.
210. Shin, K. and Hammond, J.K. (2008) Fundamentals of Signal Processing for Sound and Vibration Engineers, JohnWiley & Sons, Ltd.
211. Swanson, D.C. (2000) Signal Processing for Intelligent Sensor Systems, Marcel Dekker.
212. Naidu, P.S. (2001) Sensor Array Signal Processing, CRC Press.
213. Vaseghi, S.V. (2000) Advanced Digital Signal Processing and Noise Reduction, John Wiley & Sons, Ltd.
214. Deng, M. (2006) Characterization of surface properties of a solid plate using nonlinear Lamb wave approach, Ultrasonics, 44, 1157-1162.
215. Murayama, R. andAyaka K. (2007) Evaluation of fatigue specimens usingEMATs for nonlinear ultrasonic wave detection. Journal of Nondestructive Evaluation, 26, 115-122.
216. Bermes, C, Kim, J.Y., Qu, J. and Jacobs L.J. (2008) Nonlinear Lamb waves for the detection of material nonlinearity. Mechanical Systems and Signal Processing, 22, 638-646.
217. Smith, S.W. (1997) The Scientist and Engineer's Guide to Digital Signal Processing, California Technical Publishing, San Diego, CA, USA.
218. Su, Z. and Ye, L. (2009) Identification of damage using Lamb waves. From fundamentals to applications. Lecture Notes in Applied and Computational Mechanics, 48, Springer.
219. Jeong, H. and Jang, Y.-S. (2000) Wavelet analysis of plate wave propagation in composite laminates, Composite Structures, 49, 443-450.
220. Ding, Y., Reuben, R.L. and Steel, J.A. (2004) A new method for waveform analysis for estimating AE wave arrival times using wavelet decomposition. NDT&E International, 37, 279-290.
221. Zak, A., Krawczuk, M. and OstachowiczW. (2006) Propagation of in-plane waves in an isotropic panel with a crack. Finite Elements in Analysis and Design, 42, 929-941.
222. Moll, J., Schulte, R.T., Hartmann, B. et al. (2010) Multi-site damage localization in anisotropic plate-like structures using an active guided wave structural health monitoring system. Smart Materials and Structures, 19, 045022.
223. Wandowski, T., Malinowski, P., Kudela, P. and Ostachowicz, W. (2009) Experimental verification of damage localization algorithm based on triangular PZT transducers network. Proceedings of the 7th International Workshop on Structural Health Monitoring, pp. 2315-2322.
224. Schubert, F. (2008)Aconceptual study on guided wave-based imaging techniques for SHM with distributed transducer array. Proceedings of the 4th European Workshop on Structural Health Monitoring, pp. 748-757.
225. Qiang, W. and Shenfang, Y. (2009) Baseline-free imaging method based on new PZT sensor arrangements. Journal of Intelligent Materials Systems and Structures, 20, 1663-1673.
226. Quek, S.T., Tua, P.S. and Jin, J. (2007) Comparison of plain piezoceramics and inter-digital transducer for crack detection in plates. Journal of Intelligent Material Systems and Structures, 18(9), 949-961.
227. Wang, D., Ye, L., Lu, Y. and Li, F. (2010) A damage diagnostic imaging algorithm based on the quantitative comparison of Lamb wave signals. Smart Materials and Structures, 19(6), 965008.
228. Fasel, T.R. and Todd, M.D. (2010) An adhesive bond state classification method for a composite skin-to-spar joint using chaotic insonification. Journal of Sound and Vibration, 329, 3218-3232.
229. Kudela, P., Ostachowicz, W. and Zak, A. (2008) Damage detection in composite plates with embedded PZT transducers. Mechanical Systems and Signal Processing, 22(6), 1327-1335.
230. Stepinski, T. and Engholm, M. (2009) Piezoelectric circular array for structural health monitoring using plate waves. Proceedings of the 7th InternationalWorkshop on Structural Health Monitoring, pp. 1050-1056.
231. Yu, L., Santoni-Bottai, G., Xu, B. , Liu, W. and Giurgiutiu, V. (2008) Piezoelectric wafer active sensors for in situ ultrasonic-guided wave SHM. Fatigue and Fracture of Engineering Materials and Structures, 31(8), 611-628.
232. Pena, J., Melguizo, C.P., Martinez-Ona, R. et al. (2004) Advanced phased array system for structural damage detection. Proceedings of the 3rd EuropeanWorkshop on Structural Health Monitoring.
233. Sundararaman, A., Adams, D.E. and Rigas, E.J. (2005) Biologically inspired structural diagnostics through beamforming with phased transducers arrays. International Journal of Engineering Science, 43, 756-778.
234. Criado, A., Melguizo, C.P., Macias, J.P. et al. (2007) Low frequency, builtin phased array system for stiffened composite structures monitoring. Proceedings of the III ECCOMAS Thematic Conference on Smart Structures and Materials.
235. Giurgiutiu,V. and Yu, L. (2007) In situ imaging of crack growth with piezoelectricwafer active sensors. AIAA Journal, 45(11), 2758-2769.
236. Ostachowicz, W., Kudela, P., Malinowski, P. and Wandowski T. (2009) Damage localisation in plate-like structures based on PZT sensors. Mechanical Systems and Signal Processing, 23(6), 1805-1829.
237. Yu, L. and Giurgiutiu,V. (2008) In situ 2D piezoelectric wafer active sensors arrays for guided wave damage detection. Ultrasonics, 48, 117-134.
238. Malinowski, P.,Wandowski, T., Trendafilova, I. and Ostachowicz,W. (2007) Multiphased array for damage localisation. Key Engineering Materials, 347, 77-82.
239. Engholm, M. and Stepinski, T. (2010) Using 2-D arrays for sensing multimodal Lamb waves. Proceedings of SPIE, 7649, 764913.
240. Wang, X. and Tang, J. (2010) An enhanced piezoelectric impedance approach for damage detection with circuitry integration. Smart Materials and Structures, 19, 045001.
241. Wang, X. and Tang, J. (2010) Damage detection using piezoelectric admittance approach with inductive circuitry. Journal of Intelligent Materials Systems and Structures, 21, 667-676.
242. Kuang,Y.D., Shi, S.Q., Chan, P.K.L. et al. (2010) Theoretical and experimental studies on the electric impedance of active piezoelectric sensors bonded on cracked beams. Smart Materials and Structures, 19, 045021.
243. Park, S., Shin, H.-H. and Yun, C.-B. (2009) Wireless impedance sensor nodes for functions of structural damage identification and sensor self-diagnosis. Smart Materials and Structures, 18(5), 055001.
244. Peairs, D.M., Park, G. and Inman, D.J. (2004) Improving accessibility of the impedance-based structural health monitoring method. Journal of Intelligent Material Systems and Structures, 15, 129-139.
245. Mallet, L., Lee, B.C., Staszewski,W.J. and Scarpa, F. (2004) Structural health monitoring using scanning laser vibrometry: II. Lamb waves for damage detection. Smart Materials and Structures, 13, 261-269.
246. Leong, W.H., Staszewski, W.J., Lee B.C. and Scarpa, F. (2005) Structural health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection. Smart Materials and Structures, 14, 1387-1395.
247. Staszewski, W.J., Mahzan, S. and Traynor, R. (2009) Health monitoring of aerospace composite structures - active and passive approach. Composites Science and Technology, 69, 1678-1685.
248. Ruzzene, M., Jeong, S.M., Michaels, T.E. et al. (2005) Simulation and measurement of ultrasonic waves in elastic plates using laser vibrometry. Review of Quantitative Nondestructive Evaluation, 24, 172-179.
249. Ruzzene, M. (2007) Frequency-wavenumber domain filtering for improved damage visualization. Smart Materials and Structures, 16, 2116-2129.
250. Sohn, H., Dutta, D., Yang, J.Y. et al. (2010) A wave filed imaging technique for delamination detection in composite structures. Proceedings of the Fifth European Workshop on Structural Health Monitoring, pp. 1335-1340.
251. Grabowska, J., Palacz, M. and Krawczuk, M. (2008) Damage identification by wavelet analysis. Mechanical Systems and Signal Processing, 22, 1623-1635.
252. Staszewski, W.J. (2000) Wavelets for mechanical and structural damage identification. Zeszyty Naukowe IMP PAN w Gdánsku, 510, 1469.
253. Michaels, J.E., Croxford, A.J. and Wilcox, P.D. (2008) Imaging algorithms for locating damage via in situ ultrasonic sensors. Proceedings of the 2008 IEEE Sensors Applications Symposium, pp. 63-67.
254. Ostachowicz, W. and Kudela, P. (2010) Elastic waves for damage detection in structures, in New Trends in Vibration Based Structural Health Monitoring (eds A. Deraemaker and K. Worden), SpringerWien, New York, pp. 247-300.
255. Grabowska, J. and Krawczuk, M. (2005) Identification of discontinuities in composite rods and beams based on Lamb wave propagation. Key Engineering Materials, 293-294, 517-524.
256. Chipperfield, A.J., Fleming, P.J., Pohlheim, H. and Fonseca, C.M. (1994) Genetic Algorithm Toolbox User's Guide. ACSE Research Report 512, University of Sheffield.
257. Zienkiewicz, O.C. and Taylor, R.L. (1991) The Finite Element Method. 4th edn, vol. 2, Solid and Fluid Mechanics. Dynamics and Non-linearity, McGraw-Hill Book Company.
258. Rao, S.S. (1989) The Finite Element Method in Engineering, 2nd edn, Pergamon Press.
259. Ochoa, O.O. and Reddy, J.N. (1992) Finite Elements Analysis of Composite Laminates, Kluwer Academic Publishers.