Rock joints: The mechanical genesis

Rock Joints: The Mechanical Genesis

Volumn , Issue , 2005, Pages 1-221

  Mandl, Georg ^a  

^a NONE   (Austria)

Author keywords

[No Author keywords available]

Indexed keywords

ROCK MECHANICS;

AUSTRIA; FLUID PRESSURES; JOINT SYSTEM; MECHANICAL PROCESS; ROCK JOINT; TECHNICAL UNIVERSITIES;

ROCKS;

EID: 84891461282     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/b137623     Document Type: Book

References (84)

1. Ashby MF, Hallam SD (1986) The failure of brittle solids containing small cracks under compressive stress states. Acta metallurgy 34: 497-510
2. Atkinson BK (1987) Fracture mechanics of rocks. Academic Press, London
3. Bai T, Pollard DD (2000) Closely spaced fractures in layered rocks: initiation mechanism and propagation kinematics. J Struct Geol 22: 1409-1425
4. Bankwitz P, Bahat D, Bankwitz E (2000) Granitklüftung - Kenntnisstand 80 Jahre nach Hans Cloos. Z Geol Wiss 28(1 /2):87-110
5. Barquins M, Petit J-P (1992) Kinetic instabilities during the propagation of a branch crack: effects of loading conditions and internal pressure. J Struct Geol 14: 893-903
6. Beach A (1977) Vein arrays, hydraulic fractures and pressure solution structures in a deformed flysch sequence, SW England. Tectonophysics 40: 201-225
7. Bock H (1980) Die Rolle der Werkstoffkunde bei der mechanischen Interpretation geologischer Trennflächen. N Jb Geol Paläont Abh 160: 380-405
8. Bourne SJ, Willemse EJM (2001) Elastic stress control on the pattern of tensile fracturing around a small fault network at Nash Point, UK. J Struct Geol 23: 1753-1770
9. Brace WF, Bombolakis EG (1963) A note on brittle crack growth in compression. J Geophys Res 68(12):3709-3713
10. Cooke ML, Underwood CA (2001) Fracture termination and step-over at bedding interfaces due to frictional slip and interface opening. J Struct Geol 23: 223-238
11. Cotterell B, Rice JR (1980) Slightly curved or kinked cracks. Int J Fracture 16: 155-169
12. Cundall P (1990) Numerical modelling of jointed and faulted rock. In: Rossmanith HP (ed) Proceedings of the International Conference on the Mechanics of Jointed and Faulted Rock, Vienna, Austria. Balkema, Rotterdam, pp 11-18
13. Dyer R (1988) Using joint interactions to estimate paleostress ratios. J Struct Geol 10: 685-699
14. Engelder T (1987) Joints and shear fractures in rock. In: Atkinson BK (ed) Fracture Mechanics of Rocks. Academic Press, London, pp 27-69
15. Engelder T (1993) Stress regimes in the lithosphere. Princeton University Press
16. Friedman M (1972) Residual elastic strain in rocks. Tectonophysics 15: 297-330
17. Friedman M, Logan JM (1970) Influence of residual elastic strain on the orientation of experimental fractures in three quartzose sandstones. J Geophys Res 75(2):387-405
18. Gramberg J (1989) A non-conventional view on rock mechanics and fracture mechanics. Balkema, Rotterdam
19. Gretener PE (1983) Remarks by a geologist on the propagation and containment of extension fractures. Bull Ver Schweiz Petroleum-Geol Ing 49(116):29-35
20. st Int. Congress Appl. Mechanics, Delft. J. Waltman, Delft, pp 55-63
21. Gross MR (1993) The origin and spacing of cross joints: examples from the Monterey Formation, Santa Barbara coastline, California. J Struct Geol 15: 737-751
22. Hallbauer DK, Wagner H, Cook NGW (1973) Some observations concerning the microscopic and mechanical behaviour of quartzite specimens in stiff, triaxial compression tests. Int J Rock Mech Min Sci 10: 713-726
23. Helgeson DE, Aydin A (1991) Characteristics of joint propagation across layer interfaces in sedimentary rocks. J Struct Geol 13: 897-911
24. Hobbs DW (1967) The formation of tension joints in sedimentary rocks: an explanation. Geol Magazine 104: 550-556
25. Hoek E, Bieniawski ZT (1965) Brittle fracture propagation in rock under compression. Int J Rock Mech Min Sci 1: 137-155
26. Holzhausen GR, Johnson AM (1979) Analysis of longitudinal splitting of uniaxially compressed rock cylinders. Int J Rock mech Min Sci 16: 163-177
27. Josselin de Jong G (1959) Statics and kinematics in the failable zone of granular material. Dr. thesis, Techn. University Delft
28. Kármán von T (1911) Festigkeitsversuche unter allseitigem Druck. Z Ver dt Ing 55: 1749-57
29. Kemeny JM (1993) The micromechanics of deformation and failure in rocks. In: Pasamehmetoglu et al. (eds) Assessing and Prevention of Failure Phenomena in Rock Engineering, Balkema, Rotterdam, pp 23-33
30. King G, Sammis C (1992) The Mechanisms of finite brittle strain. Pageoph 138(4):611-640
31. Lachenbruch AH (1961) Depth and spacing of tension cracks. J Geophys Res 66: 4273-4292
32. Lachenbruch AH (1962) Mechanics of thermal contraction cracks and ice-wedge polygons in permafrost. Geological Society of America Special Paper 70
33. Lagalli M (1930) Versuch einer Theorie der Spaltenbildung in Gletschern. Z Gletscherkunde 17: 285-301
34. Lawn BR, Wilshaw TR (1975) Fracture of brittle solids. Cambridge University Press
35. Lehner F, Pilaar WF (1974) Shell Research Report (internal)
36. Lehner F, Pilaar WF (1997) The emplacement of clay smears in syn-sedimentary normal faults: inference from field observations near Frechen, Germany. In: Moller-Pedersen P, Koestler AG (eds) Hydrocarbon seals. Norwegian Petroleum Soc Special Publ 7: 39-50
37. Leroy Y, Ortiz M (1990) Finite-element analysis of transient strain localization phenomena in frictional solids. Int J Numer Anal Met Geomech 14: 93-124
38. Lockner DA, Madden TR (1991) A multiple-crack model of brittle fracture, II. Time-dependent simulations. J Geophys Res 96: 19643-19654
39. Mandl G (1987a) Tectonic deformation by rotating parallel faults: the "bookshelf" mechanism. Tectonophysics 141: 277-316
40. Mandl G (1987b) Discontinuous fault zones. J Struct Geol 9: 105-110
41. Mandl G (1988) Mechanics of tectonic faulting, models and basic concepts. Elsevier, Amsterdam
42. Mandl G (2000) Faulting in brittle rocks: an introduction to the mechanics of tectonic faults. Springer-Verlag, Heidelberg Berlin
43. Mandl G, Harkness R (1987) Hydrocarbon migration by hydraulic fracturing. In: Jones ME, Preston RMF (eds) Deformation of sediments and sedimentary rocks. Geol Soc Specail Publ 29: 39-53
44. Martel SJ (1990) Formation of compound strike-slip fault zones, Mount Abbot quadrangle, California. J Struct Geol 12: 869-882
45. McGarr A (1980) Some constraints on levels of shear stress in the crust from observations and theory. J Geophys Res 85: 6231-6238
46. McQuillan H (1973) Small-scale fracture density in Asmari Formation of southwest Iran and its relation to bed thickness and structural setting. Am Assoc Petrol Geol Bull 57: 2367-2385
47. Meier D, Kronberg P (1989) Klüftung in Sedimentgesteinen. Enke, Stuttgart
48. Mollema PN, Antonellini M (1999) Development of strike-slip faults in the dolomites of the Sella Group, Northern Italy. J Struct Geol 21: 273-292
49. Moore DE, Summers R, Byerlee JD (1990) Deformation of granite during triaxial friction tests. In: Rossmanith HP (ed) Proceedings of the International Conference on the Mechanics of Jointed and Faulted Rock, Vienna, Austria. Balkema, Rotterdam, pp 345-352
50. Narr W, Suppe J (1991) Joint spacing in sedimentary rocks. J Structl Geol 13(9):1037-1048
51. Nur A (1982) The origin of tensile fracture lineaments. J Struct Geol 4(1):31-40
52. Olson JE, Pollard DD (1991) The initiation and growth of en échelon veins. J Struct Geol 13(5):595-608
53. Petit J-P, Barquins M (1988) Can natural faults propagate under mode II conditions? Tectonics 7: 1243-1256
54. Petit J-P, Auzias V, Rawnsley KD, Rives T (2000) Development of joint sets in the vicinity of faults. In: Lehner FK, Urai JL (eds) Aspects of Tectonic Faulting. Springer-Verlag, Berlin Heidelberg, pp 167-183
55. Poliakov ANB, Herrmann HJ, Podladchikov YY, Roux S (1994) Fractal plastic shear bands. Fractals 2(4):567-581
56. Pollard DD (1973) Derivation and evaluation of a mechanical model for sheet intrusion. Tectonophysics 19: 233-269
57. Pollard DD, Aydin A (1988) Progress in understanding jointing over the past century. Geol Soc Am Bull 100: 1181-1204
58. Pollard DD, Müller O (1976) The effect of gradients in regional stress and magma pressure on the form of sheet intrusions in cross section. Geophys Res Letters 81(5):975-988
59. Pollard DD, Segall P (1987) Theoretical displacements and stresses near fractures in rocks: with applications to faults, joints, veins, dikes, and solution surfaces. In: Atkinson BK (ed) Fracture mechanics of rocks. Academic Press, London, pp 277-349
60. Pollard DD, Segall P, Delaney PT (1982) Formation and interpretation of dilatant echelon cracks. Geol Soc Am Bull 93: 1291-1303
61. Price NJ (1966) Fault and joint development in brittle and semi-brittle rock. Pergamon Press, Oxford
62. rd Congress of the International Society for Rock Mechanics, Denver, Colorado, pp 487-496
63. Price NJ, Cosgrove JW (1990) Analysis of geological structures. Cambridge University Press
64. Ramsay JG (1980) The crack-seal mechanism of rock deformation. Nature 284: 135-139
65. Ramsay JG, Huber M (1987) The techniques of modern structural geology, vol. 2: Folds and fractures. Academic Press, London
66. Rawnsley KD, Rives T, Petit J-P, Hencher SR, Lumsden AC (1992) Joint perturbations at faults. J Struct Geol 14(8 /9):939-951
67. Renshaw CE, Pollard DD (1994) Are large differential stresses required for straight fracture propagation paths? xsJ Struct Geol 16: 817-822
68. Rives T, Petit J-P (1990) Experimental study of jointing during cylindrical and non-cylindical folding. In: Rossmanith HP (ed) Proceedings of the International Conference on the Mechanics of Jointed and Faulted Rock, Vienna, Austria. Balkema, Rotterdam, pp 205-211
69. Rossmanith HP (1990) Mechanics of jointed and faulted rock: Proceedings of an International Conference, Vienna, Austria. Balkema, Rotterdam
70. Rudnicki JW, Rice JR (1975) Conditions for the localization of deformation in pressure-sensitive dilatant materials. J Mech Phys Solids 23: 371-394
71. Secor DT Jr., Pollard DD (1975) On the stability of open hydraulic fractures in the Earth's crust. Geophys Res Letters 2(11):510-513
72. Segall P, Pollard DD (1983) Nucleation and growth of strike-slip faults in granite. J Geophys Res 88(B1):555-568
73. Sibson RH (1981) Controls on low-stress hydro-fracture dilatancy in thrust, wrench and normal fault terrains. Nature 289: 665-667
74. Sobolev G, Spetzler H, Salov B (1978) Precursors to failure in rocks while undergoing anelastic deformations. J Geophys Res 83(B4):1775-1784
75. Suppe J (1985) Principles of structural geology. Prentice Hall, London
76. Takada A (1990) Experimental study on propagation of liquid-filled crack in gelatin: shape and velocity in hydrostatic stress condition. J Geophys Res 95: 8471-8481
77. Tatsuoka F, Nakamura S, Huang C-C, Tani K (1990) Strength anisotropy and shear band direction in plane strain tests on sand. Soils and Foundations 30(1):35-54
78. Terzaghi K (1923) Die Berechnung der Durchlässigkeitsziffer des Tones aus dem Verlauf der hydrodynamischen Spannungserscheinungen. Sitzungsberichte der Akademie der Wissenschaften Wien, mathematisch- naturwissenschaftliche Klasse 132(11 a):107-122
79. Terzaghi K (1925) Erdbaumechanik auf bodenphysikalischer Grundlage. Deutike, Wien
80. Thomas A L, Pollard DD (1993) The geometry of echelon fractures in rock: implications from laboratory and numerical experiments. J Struct Geology 15: 323-334
81. Vermeer PA (1990) The orientation of shear bands in biaxial tests. Géotechnique 40(2):223-236
82. Vermeer PA, de Borst R (1984) Non-associated plasticity for soils, concrete, and rock. Heron 29: 1-64
83. Vutukuri VS, Lama RD, Saluja SS (1974) Handbook on mechanical properties of rocks, vol I. Transtech Publications, Clausthal
84. Weertman J (1971) Theory of water-filled crevasses in glaciers applied to magma transport beneath oceanic ridges. J Geophys Res 76: 1171-1183