High-temperature piezoelectric sensing

Sensors (Switzerland)

Volumn 14, Issue 1, 2014, Pages 144-169

  Jiang, Xiaoning ^a   Kim, Kyungrim ^a   Zhang, Shujun ^b   Johnson, Joseph ^a   Salazar, Giovanni ^a  

^a North Carolina State University   (United States)

^b PENNSYLVANIA STATE UNIVERSITY   (United States)

Author keywords

High temperature piezoelectric sensors; High temperature piezoelectrics; High temperature sensing; Piezoelectric sensors

Indexed keywords

ACOUSTIC EMISSION TESTING; ACOUSTIC SURFACE WAVE DEVICES; ACOUSTIC WAVES; ELECTRIC SENSING DEVICES; PIEZOELECTRIC TRANSDUCERS; PIEZOELECTRICITY; SINGLE CRYSTALS; TEMPERATURE SENSORS; ULTRASONIC TRANSDUCERS;

AUTOMOTIVE POWER PLANT; HIGH-TEMPERATURE APPLICATION; HIGH-TEMPERATURE PIEZOELECTRIC; HIGH-TEMPERATURE PIEZOELECTRIC SENSOR; HIGH-TEMPERATURE SENSING; HIGHEST TEMPERATURE; PIEZOELECTRIC; PIEZOELECTRIC SENSORS;

HIGH TEMPERATURE APPLICATIONS;

EID: 84891094291     PISSN: 14248220     EISSN: None     Source Type: Journal    
DOI: 10.3390/s140100144     Document Type: Review

References (98)

1. Hunter, G.W.; Wrbanek, J.D.; Okojie, R.S.; Neudeck, P.G.; Fralick, G.C.; Chen, L.; Xu, J.; Beheim, G.M. Development and Application of High-Temperature Sensors and Electronics for Propulsion Applications. In Proceedings of the Defense and Security Symposium, Orlando (Kissimmee), FL, USA, 17 April 2006.
2. Zhang, S.; Fei, Y.; Chai, B.H.; Frantz, E.; Snyder, D.W.; Jiang, X.; Shrout, T.R. Characterization of piezoelectric single crystal YCa4O(BO3)3 for high-temperature applications. Appl. Phys. Lett. 2008, 92, doi:10.1109/TUFFC.2008.985.
3. Turner, R.; Fuierer, P.; Newnham, R.; Shrout, T. Materials for high-temperature acoustic and vibration sensors: A review. Appl. Acoust. 1994, 41, 299-324.
4. Kažys, R.; Voleišis, A.; Voleišienė, B. High-temperature ultrasonic transducers: Review. Ultragarsas 2008, 63, 7-17.
5. Fleming, W.J. Overview of automotive sensors. IEEE Sens. J. 2001, 1, 296-308.
6. Johnson, R.W.; Evans, J.L.; Jacobsen, P.; Thompson, J.R.; Christopher, M. The changing automotive environment: High-temperature electronics. IEEE Trans. Electron. Packag. Manuf. 2004, 27, 164-176.
7. Young, D.J.; Du, J.; Zorman, C.A.; Ko, W.H. High-temperature single-crystal 3C-SiC capacitive pressure sensor. IEEE Sens. J. 2004, 4, 464-470.
8. Li, X.; Liu, Q.; Pang, S.; Xu, K.; Tang, H.; Sun, C. High-temperature piezoresistive pressure sensor based on implantation of oxygen into silicon wafer. Sens. Actuators A 2012, 179, 277-282.
9. Pulliam, W.J.; Russler, P.M.; Fielder, R.S. High-Temperature High-Bandwidth Fiber Optic MEMS Pressure-Sensor Technology for Turbine Engine Component Testing. In Proceedings of Fiber Optic Sensor Technology and Applications, Boston, MA, USA, 28 October 2001; pp. 229-238.
10. Dauderstadt, U.; de Vries, P.; Hiratsuka, R.; Sarro, P. Silicon accelerometer based on thermopiles. Sens. Actuators A 1995, 46, 201-204.
11. Seidel, H.; Fritsch, U.; Gottinger, R.; Schalk, J.; Walter, J.; Ambaum, K. A Piezoresistive Silicon Accelerometer with Monolithically Integrated CMOS-Circuitry. In Proceedings of the 8th International Conference on Solid-State Sensors and Actuators (Transducers' 95), Stockholm, Sweden, 29 June 1995; pp. 597-600.
12. Li, N.; Tan, T.-C. A high-temperature metallic oxide resistive oxygen sensor. Sens. Actuators B 1992, 9, 91-96.
13. Zimmermann, L.; Ebersohl, J.P.; Le Hung, F.; Berry, J.; Baillieu, F.; Rey, P.; Diem, B.; Renard, S.; Caillat, P. Airbag application: A microsystem including a silicon capacitive accelerometer, CMOS switched capacitor electronics and true self-test capability. Sens. Actuators A 1995, 46, 190-195.
14. Lian, Z.; JinSong, Y.; Hao, L. Conditioning Circuit for Precise SiC Capacitive Pressure Sensors. In Proceedings of the IEEE Conference on Industrial Electronics and Applications (ICIEA), Beijing, China, 23 June 2011; pp. 559-563.
15. Yazdi, N.; Ayazi, F.; Najafi, K. Micromachined inertial sensors. Proc. IEEE 1998, 86, 1640-1659.
16. Kasten, K.; Amelung, J.; Mokwa, W. CMOS-compatible capacitive high-temperature pressure sensors. Sens. Actuators A 2000, 85, 147-152.
17. Wang, J.; Dong, B.; Lally, E.; Gong, J.; Han, M.; Wang, A. Multiplexed high-temperature sensing with sapphire fiber air gap-based extrinsic Fabry-Perot interferometers. Opt. Lett. 2010, 35, 619-621.
18. Riza, N.A.; Sheikh, M.; Perez, F. Hybrid wireless-wired optical sensor for extreme temperature measurement in next generation energy efficient gas turbines. J. Eng. Gas Turbines Power 2010, 132, doi:10.1115/1.3204509.
19. Barrera, D.; Finazzi, V.; Villatoro, J.; Sales, S.; Pruneri, V. Packaged optical sensors based on regenerated fiber bragg gratings for high-temperature applications. IEEE Sens. J. 2012, 12, 107-112.
20. Nguyen, L.V.; Hwang, D.; Moon, S.; Moon, D.S.; Chung, Y. High-temperature fiber sensor with high sensitivity based on core diameter mismatch. Opt. Express 2008, 16, 11369-11375.
21. Zhang, S.; Yu, F. Piezoelectric materials for high-temperature sensors. J. Am. Ceram. Soc. 2011, 94, 3153-3170.
22. Damjanovic, D. Materials for high-temperature piezoelectric transducers. Curr. Opin. Solid State Mater. Sci. 1998, 3, 469-473.
23. Schulz, M.; Sauerwald, J.; Richter, D.; Fritze, H. Electromechanical properties and defect chemistry of high-temperature piezoelectric materials. Ionics 2009, 15, 157-161.
24. Hornsteiner, J.; Born, E.; Fischerauer, G.; Riha, E. Surface Acoustic Wave Sensors for High-Temperature Applications. In Proceedings of the IEEE International Frequency Control Symposium, Pasadena, CA, USA, 29 May 1998; pp. 615-620.
25. Fachberger, R.; Bruckner, G.; Knoll, G.; Hauser, R.; Biniasch, J.; Reindl, L. Applicability of LiNbO3, langasite and GaPO4 in high-temperature SAW sensors operating at radio frequencies. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2004, 51, 1427-1431.
26. Ohlendorf, G.; Richter, D.; Sauerwald, J.; Fritze, H. High-temperature electrical conductivity and electro-mechanical properties of stoichiometric lithium niobate. Diffus. Fundam. 2008, 8, 1-7.
27. Fritze, H. High-temperature piezoelectric materials: Defect chemistry and electro-mechanical properties. J. Electroceram. 2006, 17, 625-630.
28. Hornsteiner, J.; Born, E.; Riha, E. Langasite for high-temperature surface acoustic wave applications. Phys. Status Solidi A 1997, 163, R3-R4.
29. Fritze, H.; Tuller, H. Langasite for high-temperature bulk acoustic wave applications. Appl. Phys. Lett. 2001, 78, 976-977.
30. Fritze, H.; Seh, H.; Tuller, H.; Borchardt, G. Operation limits of langasite high-temperature nanobalances. J. Eur. Ceram. Soc. 2001, 21, 1473-1477.
31. Fritze, H. High-temperature bulk acoustic wave sensors. Meas. Sci. Technol. 2011, 22, doi:10.1088/0957-0233/22/1/012002.
32. Lin, C.-M.; Yen, T.-T.; Felmetsger, V.V.; Hopcroft, M.A.; Kuypers, J.H.; Pisano, A.P. Thermally compensated aluminum nitride Lamb wave resonators for high-temperature applications. Appl. Phys. Lett. 2010, 97, doi:10.1063/1.3481361.
33. Yen, T.-T.; Lin, C.-M.; Zhao, X.; Felmetsger, V.V.; Senesky, D.G.; Hopcroft, M.A.; Pisano, A.P. Characterization of Aluminum Nitride Lamb Wave Resonators Operating at 600 °C for Harsh Environment RF Applications. In Proceedings of the International Conference on Micro Electro. Mechanical Systems (MEMS), Wanchai, Hong Kong, 28 January 2010; pp. 731-734.
34. Yu, F.; Zhang, S.; Zhao, X.; Yuan, D.; Qin, L.; Wang, Q.-M.; Shrout, T.R. Dielectric and electromechanical properties of rare earth calcium oxyborate piezoelectric crystals at high-temperatures. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2011, 58, 868-873.
35. Zhang, S.; Zheng, Y.; Kong, H.; Xin, J.; Frantz, E.; Shrout, T.R. Characterization of high-temperature piezoelectric crystals with an ordered langasite structure. J. Appl. Phys. 2009, 105, doi:10.1063/1.3142429.
36. Zhang, S.; Fei, Y.; Frantz, E.; Snyder, D.; Chai, B.; Shrout, T. High-temperature piezoelectric single crystal ReCa4O(BO3)3 for sensor applications. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2008, 55, 2703-2708.
37. Zhang, S.; Frantz, E.; Xia, R.; Everson, W.; Randi, J.; Snyder, D.W.; Shrout, T.R. Gadolinium calcium oxyborate piezoelectric single crystals for ultrahigh-temperature (>1,000 °C) applications. J. Appl. Phys. 2008, 104, doi:10.1063/1.3000560.
38. Jacobs, K.; Hofmann, P.; Klimm, D.; Reichow, J.; Schneider, M. Structural phase transformations in crystalline gallium orthophosphate. J. Solid State Chem. 2000, 149, 180-188.
39. Shimamura, K.; Takeda, H.; Kohno, T.; Fukuda, T. Growth and charaterization of lanthanum gallium silicate La3Ga5SiO14 single crystals for piezoelectric applications. J. Cryst. Growth 1996, 163, 388-392.
40. Da Cunha, M.P.; Moonlight, T.; Lad, R.; Frankel, D.; Bernhard, G. High-Temperature Sensing Technology for Applications up to 1,000 °C. In Proceedings of the IEEE Sensors, Lecce, Italy, 29 October 2008; pp. 752-755.
41. Puigcorbé, J.; Vogel, D.; Michel, B.; Vilà, A.; Gràcia, I.; Cané, C.; Morante, J. High-temperature degradation of Pt/Ti electrodes in micro-hotplate gas sensors. J. Micromech. Microeng. 2003, 13, S119-S124.
42. Richter, D.; Fritze, H. High-temperature Stable Electrodes for Langasite Based Surface Acoustic Wave Devices. In Proceedings of the Sensor+Test Conferences 2011, Nürnberg, Germany, 9 June 2011; pp. 532-537.
43. Frankel, D.; Bernhardt, G.; Sturtevant, B.; Moonlight, T.; Pereira da Cunha, M.; Lad, R. Stable Electrodes and Ultrathin Passivation Coatings for High-Temperature Sensors in Harsh Environments. In Proceedings of the IEEE Sensors, Lecce, Italy, 29 October 2008; pp. 82-85.
44. Richter, D.; Sakharov, S.; Forsén, E.; Mayer, E.; Reindl, L.; Fritze, H. Thin film electrodes for high-temperature surface acoustic wave devices. Procedia Eng. 2011, 25, 168-171.
45. Firebaugh, S.L.; Jensen, K.F.; Schmidt, M.A. Investigation of high-temperature degradation of platinum thin films with an in situ resistance measurement apparatus. J. Microelectromech. Syst. 1998, 7, 128-135.
46. Vedula, R.; Desu, C.; Tirumala, S.; Bhatt, H.; Desu, S.; Lee, K. New electrode-barrier structures for high density ferroelectric memories. Appl. Phys. A 2001, 72, 13-20.
47. Bernhardt, G.; Silvestre, C.; LeCursi, N.; Moulzolf, S.; Frankel, D.; Lad, R. Performance of Zr and Ti adhesion layers for bonding of platinum metallization to sapphire substrates. Sens. Actuators B 2001, 77, 368-374.
48. Lisoni, J.; Johnson, J.; Everaert, J.-L.; Goux, L.; Meeren, H.V.; Paraschiv, V.; Willegems, M.; Maes, D.; Haspeslagh, L.; Wouters, D.; et al. Mechanical stability of Ir electrodes used for stacked SrBi2Ta2O9 ferroelectric capacitors. Integr. Ferroelectr. 2006, 81, 37-45.
49. Kim, K.-W.; Lee, E.-H.; Kim, J.-S.; Shin, K.-H.; Jung, B.-I. A study on performance improvement of Ir oxide-coated titanium electrode for organic destruction. Electrochim. Acta 2002, 47, 2525-2531.
50. Lee, S.; Chu, C.-L.; Tsai, M.-J.; Lee, J. High-temperature oxidation behavior of interconnect coated with LSCF and LSM for solid oxide fuel cell by screen printing. Appl. Surf. Sci. 2010, 256, 1817-1824.
51. Francois, B.; Richter, D.; Fritze, H.; Davis, Z.J.; Droit, C.; Guichardaz, B.; Petrini, V.; Martin, G.; Friedt, J.-M.; Ballandras, S. Wireless And Passive Sensors For High-Temperature Measurements. In Proceedings of the Sensor Devices 2012: The Third International Conference on Sensor Device Technologies and Applications, Rome, Italy, 19-24 August 2012; pp. 46-51.
52. Zhu, X.; Ding, D.; Li, Y.; Lu, Z.; Su, W.; Zhen, L. Development of La0. 6Sr0. 4Co0. 2Fe0. 8O3-δ cathode with an improved stability via La0. 8Sr0. 2MnO3-film impregnation. Int. J. Hydrog. Energy 2013, 38, 5375-5382.
53. Boubai, O. Knock detection in automobile engines. IEEE Instrum. Meas. Mag. 2000, 3, 24-28.
54. Carlucci, A.; Chiara, F.; Laforgia, D. Analysis of the relation between injection parameter variation and block vibration of an internal combustion diesel engine. J. Sound Vib. 2006, 295, 141-164.
55. Szwaja, S.; Bhandary, K.; Naber, J. Comparisons of hydrogen and gasoline combustion knock in a spark ignition engine. Int. J. Hydrog. Energy 2007, 32, 5076-5087.
56. Abu-Qudais, M. Exhaust gas temperature for knock detection and control in spark ignition engine. Energy Convers. Manag. 1996, 37, 1383-1392.
57. Zhang, S.; Jiang, X.; Lapsley, M.; Moses, P.; Shrout, T.R. Piezoelectric accelerometers for ultrahigh-temperature application. Appl. Phys. Lett. 2010, 96, doi:10.1063/1.3290251.
58. Kim, K.; Zhang, S.; Salazar, G.; Jiang, X. Design, fabrication and characterization of high-temperature piezoelectric vibration sensor using YCOB crystals. Sens. Actuators A 2012, 178, 40-48.
59. Salazar, G.; Kim, K.; Zhang, S.; Jiang, X. Piezoelectric Accelerometer for High-Temperature (1,300 °C) Sensing. In Proceedings of the SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, 11 March 2012; Volumm 8347, doi:10.1117/12.917104.
60. PCB Piezotronics, Inc., Depew, New York. Available online: http://www.pcb.com/ (accessed on 4 December 2013).
61. Meggitt Sensing Systems, Dorset, UK. Available online: https://www.endevco.com/ (accessed on 4 December 2013).
62. Bulst, W.-E.; Fischerauer, G.; Reindl, L. State of the art in wireless sensing with surface acoustic waves. IEEE Trans. Industrial Electron. 2001, 48, 265-271.
63. Thiele, J.; da Cunha, M.P. High-temperature surface acoustic wave devices: Fabrication and characterisation. IEEE Power Electron. Lett. 2003, 39, 818-819.
64. Wang, S.-Q.; Harada, J.; Uda, S. A wireless surface acoustic wave temperature sensor using langasite as substrate material for high-temperature applications. Jpn. J. Appl. Phys. 2003, 42, 6124-6127.
65. Hamidon, M.N.; Skarda, V.; White, N.M.; Krispel, F.; Krempl, P.; Binhack, M.; Buff, W. High-temperature 434 MHz surface acoustic wave devices based on GaPO4. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2006, 53, 2465-2470.
66. Da Cunha, M.P.; Lad, R.; Moonlight, T.; Moulzolf, S.; Canabal, A.; Behanan, R.; Davulis, P.; Frankel, D.; Bernhardt, G.; Pollard, T.; et al. Recent Advances in Harsh Environment Acoustic Wave Sensors for Contemporary Applications. In Proceedings of the 2011 IEEE Sensors, Limerick, Ireland, 28-31 October 2011; pp. 614-617.
67. Canabal, A.; Davulis, P.; Pollard, T.; da Cunha, M.P. Multi-Sensor Wireless Interrogation of Saw Resonators at High-Temperatures. In Proceedings of the 2010 IEEE Ultrasonics Symposium (IUS), San Diego, CA, USA, 11-14 October 2010; pp. 265-268.
68. Aubert, T.; Bardong, J.; Legrani, O.; Elmazria, O.; Badreddine Assouar, M.; Bruckner, G.; Talbi, A. In situ high-temperature characterization of AlN-based surface acoustic wave devices. J. Appl. Phys. 2013, 114, doi:10.1063/1.4812565.
69. Blitz, J.; Simpson, G. Ultrasonic Methods of Non-Destructive Testing; Springer: London, UK, 1996; Volumm 2.
70. Rehman, A.; Jen, C.; Ihara, I. Ultrasonic probes for high-temperature immersion measurements. Meas. Sci. Technol. 2001, 12, 306, doi:10.1088/0957-0233/12/3/309.
71. Muto, K.; Atsuta, Y. Applications of brazed-type ultrasonic probes for high and low temperature uses. Nondestruct. Test. Eval. 1992, 7, 263-272.
72. Françla, D.; Jen, C.K.; Nguyen, K.; Gendron, R. Ultrasonic in-line monitoring of polymer extrusion. Polym. Eng. Sci. 2000, 40, 82-94.
73. Alig, I.; Steinhoff, B.; Lellinger, D. Monitoring of polymer melt processing. Meas. Sci. Technol. 2010, 21, doi:10.1088/0957-0233/21/6/062001.
74. Sahnoune, A.; Tatibouët, J.; Gendron, R.; Hamel, A.; Pich É.L. Application of ultrasonic sensors in the study of physical foaming agents for foam extrusion. J. Cell. Plast. 2001, 37, 429-454.
75. Ueki, Y.; Hirabayashi, M.; Kunugi, T.; Nagai, K.; Saito, J.; Ara, K.; Morley, N. Velocity profile measurement of lead-lithium flows by high-temperature ultrasonic doppler velocimetry. Fusion Sci. Technol. 2011, 60, 506-510.
76. Kawashima, K. Nondestructive characterization of texture and plastic strain ratio of metal sheets with electromagnetic acoustic transducers. J. Acoust. Soc. Am. 1990, 87, 681-690.
77. Dixon, S.; Edwards, C.; Palmer, S. High accuracy non-contact ultrasonic thickness gauging of aluminium sheet using electromagnetic acoustic transducers. Ultrasonics 2001, 39, 445-453.
78. Berthelot, Y.H.; Jarzynski, J. Directional laser generation and detection of ultrasound with arrays of optical fibers. J. Nondestr. Eval. 1990, 9, 271-277.
79. Jacobs, L.J.; Whitcomb, R.W. Laser generation and detection of ultrasound in concrete. J. Nondestr. Eval. 1997, 16, 57-65.
80. Haller, M.I.; Khuri-Yakub, B.T. A surface micromachined electrostatic ultrasonic air transducer. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 1996, 43, 1-6.
81. McNab, A.; Kirk, K.; Cochran, A. Ultrasonic transducers for high-temperature applications. IEE Proc-Sei. Meas. Technol. 1998, 145, 229-236.
82. Kobayashi, M.; Jen, C.-K.; Bussiere, J.F.; Wu, K.-T. High-temperature integrated and flexible ultrasonic transducers for nondestructive testing. NDT&E Int. 2009, 42, 157-161.
83. Hou, R.; Hutson, D.; Kirk, K.J.; Fu, Y.Q. AlN thin film transducers for high-temperature non-destructive testing applications. J. Appl. Phys. 2012, 111, doi:10.1063/1.3700345
84. Baba, A.; Searfass, C.T.; Tittmann, B.R. High-temperature ultrasonic transducer up to 1000° C using lithium niobate single crystal. Appl. Phys. Lett. 2010, 97, doi:10.1063/1.3524192.
85. Parks, D.A.; Zhang, S.; Tittmann, B.R. High-temperature (>500 °C) ultrasonic transducers: An experimental comparison among three candidate piezoelectric materials. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2013, 60, 1010-1015.
86. Marin-Franch, P.; Martin, T.; Tunnicliffe, D.; Das-Gupta, D. PTCa/PEKK piezo-composites for acoustic emission detection. Sens. Actuators A 2002, 99, 236-243.
87. Scruby, C.; Wadley, H. An assessment of acoustic emission for nuclear pressure vessel monitoring. Prog. Nucl. Energy 1983, 11, 275-297.
88. Bently, P. A review of acoustic emission for pressurised water reactor applications. NDT Int. 1981, 14, 329-335.
89. Holbert, K.E.; Sankaranarayanan, S.; McCready, S.S. Response of lead metaniobate acoustic emission sensors to gamma irradiation. IEEE Trans. Nucl. Sci. 2005, 52, 2583-2590.
90. Hutton, P. An overview of development and application of acoustic emission methods in the United States. Nucl. Eng. Des. 1989, 113, 59-69.
91. Hartman, W. A Case for Acoustic Emission Surveillance of Operating Reactors; Scitech Connect: San Juan Capistrano, CA, USA, 1985.
92. Runow, P. The use of acoustic emission methods as aids to the structural integrity assessment of nuclear power plants. Int. J. Press. Vessel. Pip. 1985, 21, 157-207.
93. Kirk, K.; Scheit, C.; Schmarje, N. High-temperature acoustic emission tests using lithium niobate piezocomposite transducers. Insight Non Destr. Test. Cond. Monit. 2007, 49, 142-145.
94. Johnson, J.A.; Kim, K.; Zhang, S.; Wu, D.; Jiang, X. High-Temperature (>1,000 °C) Acoustic Emission Sensor. In Proceedings of the SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego, CA, USA, 10 March 2013; art. 869428.
95. Fritze, H.; Tuller, H.; Seh, H.; Borchardt, G. High-temperature nanobalance sensor based on langasite. Sens. Actuators B 2001, 76, 103-107.
96. Zheng, P.; Chin, T.-L.; Greve, D.; Oppenheim, I.; Malone, V.; Cao, L. High-temperature langasite SAW oxygen sensor. IEEE Trans. Ultrason. Ferroelectr. Freq. Control 2011, 58, 1538-1540.
97. Takeda, H.; Hagiwara, M.; Noguchi, H.; Hoshina, T.; Takahashi, T.; Kodama, N.; Tsurumi, T. Calcium aluminate silicate Ca2Al2SiO7 single crystal applicable to piezoelectric sensors at high-temperature. Appl. Phys. Lett. 2013, 102, art. 242907.
98. Claudio, C.; Roland, S.; Max, W. High-Temperature Stability of New Single Crystal Piezoelectric Sensors. In Proceedings of the SENSOR-SENSOR+TEST Conferences 2011, Nürnberg, Germany, 9 June 2011; pp. 520-525.