Introduction to Particle Technology, SECOND EDITION

Introduction to Particle Technology, SECOND EDITION

Volumn , Issue , 2008, Pages 1-450

  Rhodes, Martin ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890988748     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470727102     Document Type: Book

References (158)

1. Abrahamsen, A. R. and Geldart, D. (1980) Behaviour of gas fluidized beds of fine powder. Part 1. Homogenous Expansion, Powder Technol., 26, 35.
2. Adetayo, A. A. and Ennis, B. J. (1997) ‘Unifying approach to modelling granule coalescence mechanisms’, AIChE J, 43 (4), 927–934.
3. Allen, T. (1990) Particle Size Measurement, 4th Edition, Chapman & Hall, London.
4. Arena U., Cammmarota, A. and Mastellone, M.L. (1998) ‘The influence of operating parameters on the behaviour of a small diameter L-valve’ in Fluidization IX, Proceedings of the Ninth Foundation Conference on Fluidization, eds L.S. Fan and T.M. Knowlton, Engineering Foundation, New York, pp. 365–372.
5. Baeyens, J. and Geldart, D. (1974) ‘An investigation into slugging fluidized beds’, Chem. Eng. Sci, 29, 255.
6. Barnes, H. A., Hutton, J. F. and Walters, K. (1989) An Introduction to Rheology, Elsevier, Amsterdam.
7. Baskakov, A. P. and Suprun, V. M. (1972) ‘The determination of the convective component of the coefficient of heat transfer to a gas in a fluidized bed’, Int. Chem. Eng., 12, 53.
8. Batchelor, G. K. (1977) ‘The effect of Brownian motion on the bulk stress in a suspension of spherical particles, J. Fluid Mech., 83, 97–117.
9. Beverloo, W. A., Leniger, H. A. and Van de Velde, J. (1961) The Flow of Granual Solids Through Onfices’, Chem. Eng. Sci., 15, issues 3-4, September 1961, 260–269.
10. Bodner, S. (1982) Proceedings of International Conference on Pneumatic Transport Technology, Powder Advisory Centre, London.
11. Bond, F. C. (1952) ‘The third theory of comminution’, Mining Eng. Trans. AIME, 193, 484–494.
12. Botterill, J. S. M. (1975) Fluid Bed Heat Transfer, Academic Press, London.
13. Botterill, J. S. M. (1986) ‘Fluid bed heat transfer’ in Gas Fluidization Technology, ed. D. Geldart, John Wiley & Sons, Ltd, Chichester, Chapter 9.
14. Brown, G.G, Katz, D., Foust, A.S. and Schneidewind, R. (1950) Unit Operations, John Wiley & Sons, Ltd, New York, Chapman & Hall, London.
15. Capes, C. E. (1980) Particle Size Enlargement, Vol. 1, Handbook of Powder Technology, Elsevier, Amsterdam.
16. Carman, P. C. (1937) Fluid flow through granular beds, Trans. Inst. Chem. Eng., 15, 150–166.
17. Chhabra, R. P. (1993) Bubbles, Drops and Particles in Non-Newtonian Fluids, CRC Press, Boca Raton, FL.
18. Clift, R., Grace, J. R. and Weber, M. E. (1978) Bubbles, Drops and Particles, Academic Press, London.
19. Coelho, M. C. and Harnby, N. (1978) ‘The effect of humidity on the form of water retention in a powder’, Powder Technol., 20, 197.
20. Cooke, W., Warr, S., Huntley, J. M. and Ball, R. C. (1996) ‘Particle size segregation in a two-dimensional bed undergoing vertical vibration’, Phys. Rev. E, 53(3), 2812–2822.
21. Coulson, J. M. and Richardson, J. F. (1991) Chemical Engineering, Volume 2: Particle Technology and Separation Processes, 4th Edition, Pergamon, Oxford.
22. Dalby, R.N., Tiano, S.L. and Hickey, A.J.(1996) ‘Medical devices for the delivery of therapeutic aerosol to the lungs’ in Inhalation Aerosols, ed. A. J. Hickey, Vol. 94, Lung Biology in Health and Disease, ed. C. Lenfant, Marcel Dekker, New York, pp. 441–473.
23. Danckwerts, P. V. ‘‘Definition and Measurement of some characteristics of Mixtures’’, Applied Scientific Research, VA3, N5, 1952, p385–390.
24. Darcy, H. P. G. (1856) Les fontaines publiques de la ville de Dijon. Exposition et applications à suivre et des formules à employer dans les questions de distribution d’eau. Victor Dalamont.
25. Darton, R. C., La Nauze, R. D., Davidson, J. F. and Harrison, D. (1977) ‘Bubble growth due to coalescence in fluidised beds’, Trans. Inst. Chem. Eng., 55, 274.
26. Davidson, J. F. and Harrison, D. (1971) Fluidization, Academic Press, London.
27. Davies, R., Boxman, A. and Ennis, B.J. (1995), Conference Summary Paper: Control of Particulate Processes III, Powder Technol. 82, 3–12.
28. Dixon, G. (1979) ‘The impact of powder properties on dense phase flow, in Proceedings of International Conference on Pneumatic Transport, London.
29. Dodge, D.W. and Metzner, A.B. (1959) ‘Turbulent flow of non-Newtonian systems’, AIChE J., 5, 89.
30. Duran, J., Rajchenbach, J. and Clement, E. (1993) ‘Arching effect model for particle size segregation’, Phys. Rev. Lett., 70(16), 2431–2434.
31. Durand, R. and Condolios, E. (1954) ‘The hydraulic transport of coal’ in Proceedings of Colloquim on Hydraulic Transport of Coal, National Coal Board, London.
32. Einstein, A. (1906) ‘Eine neue Bestimmung der Molekuldimension’, Ann. Physik, 19, 289–306.
33. Einstein, A. (1956) Investigations in the Theory of the Brownian Movement, Dover, New York.
34. Ennis, B. J. and Litster, J. D. (1997) ‘Section 20: size enlargement’ in Perry’s Chemical Engineers’ Handbook, 7th Edition, McGraw-Hill, New York, pp. 20–77.
35. Ergun, S. (1952) ‘Fluid flow through packed columns’, Chem. Eng. Prog., 48, 89–94.
36. Evans, I., Pomeroy C. D. and Berenbaum, R. (1961) The compressive strength of coal, Colliery Eng., 75–81, 123–127, 173–178.
37. Flain, R. J. (1972) ‘Pneumatic conveying: how the system is matched to the materials’, Process Eng., Nov, p 88–90.
38. Francis, A. W. (1933) ‘Wall effects in falling ball method for viscosity’, Physics, 4, 403.
39. Franks, G. V. and Lange, F. F. (1996) ‘Plastic-to-brittle transition of saturated, alumina powder compacts’, J. Am. Ceram. Soc., 79 (12), 3161–3168.
40. Franks, G. V., Zhou, Z., Duin, N. J. and Boger, D. V. (2000) ‘Effect of interparticle forces on shear thickening of oxide suspensions’, J. Rheol., 44 (4), 759–779.
41. Fryer, C. and Uhlherr, P. H. T. (1980) Proceedings of CHEMECA ‘80, the 8th Australian Chemical Engineering Conference, Melbourne, Australia.
42. Geldart, D. (1973) ‘Types of gas fluidisation’, Powder Technol., 7, 285–292.
43. Geldart, D. (ed.) (1986) Gas Fluidization Technology, John Wiley & Sons, Ltd, Chichester.
44. Geldart, D. (1990) ‘Estimation of basic particle properties for use in fluid–particle process calculations’, Powder Technol., 60, 1.
45. Geldart, D. (1992) Gas Fluidization Short Course, University of Bradford, Bradford.
46. Geldart, D. and Abrahamsen, A. R. (1981) ‘Fluidization of fine porous powders’, Chem. Eng. Prog. Symp. Ser., 77(205), 160.
47. Geldart, D. and Jones, P. (1991) ‘Behaviour of L-valves with granular powders’, Powder Technol., 67, 163–174.
48. Geldart, D., Cullinan, J., Gilvray, D., Georghiades, S. and Pope, D. J. (1979) ‘The effects of fines on entrainment from gas fluidised beds’, Trans. Inst. Chem. Eng., 57, 269.
49. Gillies, R.G., Schaan, J., Sumner, R.J., McKibben, M.J. and Shook, C.A. (2000) ‘Deposition velocities for Newtonian slurries in turbulent flow’, Can. J. Chem. Eng., 78, 704.
50. Gilvary, J. J. (1961) ‘Fracture of brittle solids. I. Distribution function for fragment size in single fracture’, J. Appl. Phys., 32, 391–399.
51. Grace, J. R., Avidan A. A. and Knowlton T. M. (eds) (1997) Circulating Fluidized Beds, Blackie Academic and Professional, London.
52. Gregory, J. (2006) Particles in Water, Properties and Processes, CRC Press, Taylor & Francis, Boca Raton, FL.
53. Griffith, A. A. (1921) ‘‘The phenomena of Rupture and Flow in Solids’’, Philosophical Transactions of the Royal Society of London, V221, 21 Oct. 1920, p. 163–198. Phil. Trans. R. Soc., 221, 163.
54. Haider, A. and Levenspiel, O. (1989) ‘Drag coefficient and terminal velocity of spherical and no-spherical particles’, Powder Technol., 58, 63 – 70.
55. Hamaker, H. C. (1937) ‘The London–van der Waals attraction between spherical particles’, Physica, 4, 1058.
56. Hanks, RW. and Ricks, B.L. (1974) ‘‘Laminar-turbulent transition in flow of pseudoplastic fluids with yield stress’’, J. Hydronautics, 8, 163.
57. Hapgood, K.P., Litster, J.D. and Smith, R. (2003) ‘Nucleation regime map for liquid bound granules’, AIChE J., 49(2), 350–361.
58. Hapgood, K.P., Litster, J.D. White, E.T. et al. (2004) ‘Dimensionless spray flux in wet granulation: Monte-Carlo simulations and experimental validation’, Powder Technol., 141 (1–2), 20–30.
59. Hapgood, K.P., Iveson, S.M., Litster, J.D. and Liu, L. (2007) ‘Granule rate processes’ in Granulation, Handbook of Powder Technology, Vol. 11, eds A.D. Salman, M.J. Hounslow and J.P.K. Seville, Elsevier, London, p. 933.
60. Harnby, N., Edwards, M. F. and Nienow, A. W. (1992) Mixing in the Process Industries, 2nd Edition, Butterworth-Heinemann, London.
61. Hawkins, A. E. (1993) The Shape of Powder Particle Outlines, Research Studies Press, John Wiley & Sons, Ltd, Chichester.
62. Hiemenz, P. C. and Rajagopalan, R. (1997) Principles of Colloid and Surface Chemistry, 3rd Edition, Marcel Dekker, New York.
63. Hinkle, B. L. (1953) PhD Thesis, Georgia Institute of Technology.
64. Holmes, J. A. (1957) ‘Contribution to the study of comminution – modified form of Kick’s law’, Trans. Inst. Chem. Eng., 35, (2), 125–141.
65. Horio, M., Taki, A., Hsieh, Y. S. and Muchi, I. (1980) ‘Elutriation and particle transport through the freeboard of a gas–solid fluidized bed’, in Fluidization, eds J. R. Grace and J. M. Matsen, Engineering Foundation, New York, p. 509.
66. Hukki, R. T. (1961) ‘Proposal for Solomonic settlement between the theories of von Rittinger, Kick and Bond’, Trans. AIME, 220, 403–408.
67. Hunter, R. J. (2001) Foundations of Colloid Science, 2nd Edition, Oxford University Press, Oxford.
68. Inglis, C. E. (1913) ‘Stress in a plate due to the presence of cracks and sharp corners’, Proc. Inst. Nab. Arch.
69. Israelachvili, J. N. (1992) Intermolecular and Surface Forces, 2nd Edition, Academic Press, London.
70. Iveson, S.M., Litster, J.D., Hapgood, K.P. and Ennis, B.J. (2001) ‘Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review’, Powder Technol., 117(1–2), 3–39.
71. Janssen, H. A. (1895) ‘Tests on grain pressure silos’, Z. Ver. Deutsch Ing., 39(35), 1045–1049.
72. Jenike, A. W. (1964) ‘Storage and flow of solids’, Bull. Utah Eng. Exp. Station, 53(123), 26.
73. Johnson, S.B., Franks, G. V., Scales, P. J. and Healy, T. W. (1999) ‘The binding of monovalent electrolyte ions on alpha-alumina. II. The shear yield stress of concentrated suspensions’, Langmuir, 15, 2844–2853.
74. Johnson, S. B., Franks, G. V., Scales, P. J., Boger, D. V. and Healy, T. W. (2000) ‘Surface chemistry–rheology relationships in concentrated mineral suspensions’, Int. J. Mineral Process., 58, 267–304.
75. Jones, D. A. R., Leary, B. and Boger, D. V. (1991) ‘The rheology of a concentrated colloidal suspension of hard spheres’, J. Colloid Interface Sci., 147, 479–495.
76. Jullien, R. and Meakin, P. (1992) ‘Three-dimensional model for particle size segregation by shaking’, Phys. Rev. Lett., 69, 640–643.
77. Karra, V. K. and Fuerstenau, D. W. (1977) ‘The effect of humidity on the trace mixing kinetic in fine powders’, Powder Technol., 16, 97.
78. Kendal, K. (1978) ‘The impossibility of comminuting small particles by compression’, Nature, 272, 710.
79. Khan, A. R and Richardson, J. F. (1989) ‘Fluid–particle interactions and flow characteristics of fluidised beds and settling suspensions of spherical particles’, Chem. Eng. Commun., 78, 111.
80. Khan, A. R., Richardson, J. F. and Shakiri, K. J. (1978) in Fluidization, Proceedings of the Second Engineering Foundation Conference, eds J. F. Davidson and D. L. Keairns, Cambridge University Press, p. 375.
81. Kick, F. (1885) Das Gasetz der proportionalen Widerstände und seine Anwendung, Leipzig.
82. Klintworth, J. and Marcus, R. D. (1985) ‘A review of low-velocity pneumatic conveying systems’, Bulk Solids Handling, 5,(4), 747–753.
83. Knight, J. B., Jaeger, H. M. and Nagel, S. R. (1993) ‘Vibration-induced separation in granular media: the convection connection’, Phys. Rev. Lett., 70, 3728–3731.
84. Knight, J. B., Ehrichs, E. E., Kuperman, V. Y., Flint, J. K., Jaeger, H. M. and Nagel, S. R. (1996) ‘Experimental study of granular convection’, Phys. Rev. E, 54, 5726–5738.
85. Knowlton, T. M. (1986) ‘Solids transfer in fluidized systems’, in Gas Fluidization Technology, ed. D. Geldart, John Wiley & Sons, Ltd, Chichester, Chapter 12.
86. Knowlton, T. M. (1997) ‘Standpipes and non-mechanical valves’, notes for the continuing education course Gas Fluidized Beds: Design and Operation, Department of Chemical Engineering, Monash University.
87. Knowlton, T.M. and Hirsan, I. (1978) ‘L-valves characterized for solids flow’, Hydrocarbon Process., 57, 149–156.
88. Konno, H. and Saito, S. J. (1969) ‘Pneumatic conveying of solids through straight pipes’, Chem. Eng. Jpn, 2, 211–217.
89. Konrad, K. (1986) ‘Dense phase conveying: a review’, Powder Technol., 49, 1–35.
90. Kozeny, J. (1927) ‘‘Capillary Motion of Water in Soils’’, Sitzungsberichte der Akactemie der Wissenschaften in Wien, Mathematisch-Naturwissenschaftliche Klasse, V136, N 5-6, p 271–306. Sitzb. Akad. Wiss., 136, 271–306.
91. Kozeny, J. (1933) Z. Pfl.-Ernahr. Dung. Bodenk, 28A, 54–56.
92. Krieger, I. M. and Dougherty, T. J. (1959) ‘A mechanism for non-Newtonian flow in suspensions of rigid spheres’, Trans. Soc. Rheol., 3, 137–152.
93. Kunii, D. and Levenspiel, O. (1969) Fluidization Engineering, John Wiley & Sons, Ltd, Chichester.
94. Kunii, D. and Levenspiel, O. (1990) Fluidization Engineering, 2nd Edition, John Wiley & Sons, Ltd, Chichester.
95. Lacey, P. M. C. (1954) ‘Developments in the theory of particulate mixing’, J. Appl. Chem., 4, 257.
96. Leung, L. S. and Jones, P. J. (1978) in Proceedings of Pneumotransport 4 Conference, BHRA Fluid Engineering, Paper Dl.
97. Liffman, K., Muniandy, K., Rhodes, M. J., Gutteridge, D. and Metcalfe, G. A. (2001) ‘A general segregation mechanism in a vertically shaken bed’, Granular Matter, 3(4), 205–214.
98. Litster, J.D., Hapgood, K.P., Michaels, J.N. et al. (2001) ‘Liquid distribution in wet granulation: dimensionless spray flux’, Powder Technol., 114(1–3), 32–39.
99. Litster, J.D. and Ennis, B.J. (2004) The Science and Engineering and Granulation Processes, Kluwer Academic Publishers, Dordrecht.
100. Liu, L. X. and Litster, J. (1993) ‘Coating mass distribution from a spouted bed seed coater: experimental and modelling studies’, Powder Technol., 74, 259.
101. Lunn, G. (1992) Guide to Dust Explosion, Prevention and Protection, Part I, Venting, Institution of Chemical Engineers, Rugby.
102. Mainwaring, N. J. and Reed, A. R. (1987) ‘An appraisal of Dixon’s slugging diagram for assessing the dense phase transport potential of bulk solid materials’, in Proceedings of Pneumatech 3, pp. 221–234.
103. Mills, D. (1990) Pneumatic Transport Design Guide, Butterworth, London.
104. Mobius, E., Lauderdale, B. E., Nagel, S. R. and Jaeger, H. M. (2001) ‘Size separation of granular particles’, Nature, 414, 270.
105. Newitt, D. M. and Conway-Jones J. M. (1958) ‘A contribution to the theory and practice of granulation’, Trans. Inst. Chem. Eng., 36, 422–442.
106. Niven, R. W., ‘Atomization and Nebulizers’ in Inhalation Aerosols, Anthony J. Hickey, Marcel Dekker, New York, 1996–Vol. 94 of Lung Biology in Health and Disease, Ed. Claude Lenfant, pp. 273–312.
107. Orcutt, J. C., Davidson J. F. and Pigford, R. L. (1962) ‘‘Reaction Time Distributions in Fluidized Catalytic Reactors’’. CEP Symp. Ser., 58(38), 1.
108. Palmer, K. N. (1990) ‘Explosion and fire hazards of powders’, in Principles of Powder Technology, ed. M. J. Rhodes, John Wiley & Sons, Ltd, Chichester, pp. 299–334.
109. Pan, R. and Wypych, P.W. (1992) ‘Scale-up procedures for pneumatic conveying design’, Powder Handling Process., 4(2), 167–172.
110. Perrin, J. (1990) Les Atomes 1913 (in French), Atoms (English translation), Ox Bow Press, Woodbridge, CT.
111. Perry, R. H. and Green, D. (eds) (1984) Perry’s Chemical Engineers’ Handbook, 6th Edition, McGraw-Hill, New York.
112. Poole, K. R., Taylor, R. F. and Wall, G. P. (1964) ‘Mixing powders to fine-scale homogeneity: studies of batch mixing’, Trans. Inst. Chem. Eng., 42, T305.
113. Punwani, D. V., Modi, M. V. and Tarman, P. B. (1976) Paper presented at the International Powder and Bulk Solids Handling and Processing Conference, Chicago.
114. Quemada, D. (1982) Lecture Notes in Physics: Stability of Thermodynamic Systems, eds J. Cases-Vasquez and J. Lebon, Springer, Berlin, p. 210.
115. Randolph, A. D. and Larson M. A. (1971) Theory of Particulate Processes, Academic Press, London.
116. Rhodes, M., Takeuchi, S., Liffman, K. and Muniandy, K. (2003) ‘Role of interstitial gas in the Brazil Nut Effect’, Granular Matter, 5, 107–114.
117. Richardson, J. F. and Zaki, W. N. (1954) ‘Sedimentation and fluidization’, Trans. Inst. Chem. Eng., 32, 35.
118. Rittinger, R. P. von (1867) Textbook of Mineral Dressing, Ernst and Korn, Berlin.
119. Rizk, F. (1973) Dr-Ing. Dissertation, Technische Hochschule Karlsruhe.
120. Rosato, A. D., Strandburg, K. J., Prinz, F. and Swendsen, R. H. (1987) ‘Why the Brazil nuts are on top: size segregation of particulate matter by shaking’, Phys. Rev. Lett., 58, 1038–1040.
121. Rosato, A. D., Blackmore, D. L., Ninghua Zhang and Yidan Lan. (2002) ‘A perspective on vibration-induced size segregation of granular materials’, Chem. Eng. Sci., 57, 265–275.
122. Rumpf, H. (1962) in Agglomeration, ed. W. A. Krepper, John Wiley & Sons, Ltd, New York, p. 379.
123. Sastry, K. V. S. (1975) ‘Similarity of size distribution of agglomerates during their growth by coalescence in granulation of green pelletization’, Int. J. Min. Process., 2, 187.
124. Sastry, K. V. S. and Fuerstenau D. W. (1970) ‘Size distribution of agglomerates in coalescing disperse systems’, Ind. Eng. Chem. Fundam., 9, (1), 145.
125. Sastry, K. V. S. and Fuerstenau, D. W. (1977) in Agglomeration 77, ed. K. V. S. Sastry, AIME, New York, p. 381.
126. Sastry, K. V. S. and Loftus K. D. (1989) ‘A unified approach to the modeling of agglomeration processes’, Proceedings of the 5th International Symposium on Agglomeration, I. Chem. E., Rugby, p. 623.
127. Schiller, L. and Naumann, A. (1993) ‘Über die grundlegenden Berechnungen der Schwerk-raftaufbereitung’, Z. Ver. Deutsch Ing., 77, 318.
128. Schofield, C. (1985) Guide to Dust Explosion, Prevention and Protection, Part I, Venting, I. Chem. E., Rugby.
129. Schofield, C. and Abbott, J. A. (1988) Guide to Dust Explosion, Prevention and Protection, Part II, Ignition Prevention, Containment, Suppression and Isolation, I. Chem. E., Rugby.
130. Shinbrot, T. and Muzzio, F. (1998) ‘Reverse buoyancy in shaken granular beds’, Phys. Rev. Lett., 81, 4365–4368.
131. Smith, S.J. and Bernstein, J.A. (1996) ‘Therapeutic use of lung aerosols’ in Inhalation Aerosols ed. A. J. Hickey, Vol. 94, Lung Biology in Health and Disease, ed. C. Lenfant, Dekker, New York, pp. 233–269.
132. Stokes, G. G. (1851) ‘On the effect of the internal friction of fluids on the motion of Pendulums’, Trans. Cam. Phil. Soc., 9, 8.
133. Svarovsky, L. (1981) Solid–Gas Separation, Elsevier, Amsterdam.
134. Svarovsky, L. (1986) ‘Solid–gas separation’, in Gas Fluidization Technology, ed. D. Geldart, John Wiley & Sons, Ltd, Chichester, pp. 197–217.
135. Svarovsky, L. (1990) ‘Solid–gas separation’, in Principles of Powder Technology, ed. M. J. Rhodes, John Wiley & Sons, Ltd, Chichester, pp. 171–192.
136. Tardos, G.I., Khan, M.I. and Mort, P.R. (1997) ‘Critical parameters and limiting conditions in binder granulation of fine powders’, Powder Technol., 94, 245–258.
137. Toomey, R. D. and Johnstone, H. F. (1952) ‘Gas fluidization of solid particles’, Chem. Eng. Prog., 48, 220–226.
138. Tsuji, Y. (1983) Recent Studies of Pneumatic Conveying in Japan Bulk Solids Handling, 3, 589– 595.
139. Waldie, B. (1991) ‘Growth mechanism and the dependence of granule size on drop size in fluidised bed granulation’, Chem. Eng. Sci. 46(11), 2781–2785.
140. Wasp, E.J., Kenny, J.P. and Gandhi, R.L.(1977) ‘Solid–liquid flow – slurry pipeline transportation’, in Series on Bulk Materials Handling, Trans Tech Publications, Clausthal, Germany Vol. 1 (1975/77), No. 4.
141. Weibel, E.R. (1963) Morphometry of the Human Lung, Springer-Verlag, Berlin.
142. Wen, C. Y. and Yu, Y. H. (1966) ‘A generalised method for predicting minimum fluidization velocity’, AIChE J., 12, 610.
143. Werther, J. (1983) ‘Hydrodynamics and mass transfer between the bubble and emulsion phases in fluidized beds of sand and cracking catalyst’, in Fluidization, eds D. Kunii and R. Toei, Engineering Foundation, New York, p. 93.
144. Williams, J. C. (1976) ‘The segregation of particulate materials: a review’, Powder Technol., 15, 245–251.
145. Williams, J. C. (1990) ‘Mixing and segregation in powders’ in Principles of Powder Technology, ed. M. J. Rhodes, John Wiley & Sons, Ltd, Chichester, Chapter 4.
146. Wilson, K. C. (1981) ‘Analysis of slip of particulate mass in a horizontal pipe’, Bulk Solids Handling, 1, 295–299.
147. Wilson, K.C. and Judge, D.G. (1976) ‘New techniques for the scale-up of pilot plant results to coal slurry pipelines’, in Proceedings of the International Symposium on Freight Pipelines, University of Pennsylvania, pp. 1–29.
148. Woodcock, C. R. and Mason, J. S. (1987) Bulk Solids Handling, Chapman and Hall, London.
149. Wypych, P.W. (1995) ‘Latest developments in the pneumatic pipeline transport of bulk solids, in Proceedings of the 5th International Conference on Bulk Materials Storage, Handling and Transportation, IEAust, Newcastle, Vol. 1, pp. 47–56.
150. Wypych, P.W., Kennedy, O.C. and Arnold, P.C. (1990) ‘The future potential of pneumatically conveying coal through pipelines’, Bulk Solids Handling 10(4), 421–427.
151. Yagi, S. and Muchi, I. (1952) Chem. Eng., (Jpn), 16, 307.
152. Zabrodsky, S.S. (1966) Hydrodynamics and Heat Transfer in Fluidized Beds, MIT Press, Cambridge, MA.
153. Zeng, X. M., Martin, G. and Marriott, C. (2001) Particulate Interactions in Dry Powder Formulations of Inhalation’, Taylor & Francis, London.
154. Zenz, F. A. (1964) ‘Conveyability of materials of mixed particle size’, Ind. Eng. Fund., 3(1), 65– 75.
155. Zenz, F. A. (1983) ‘Particulate solids – the third fluid phase in chemical engineering’, Chem. Eng, Nov, 61–67.
156. Zenz, F. A. and Weil, N. A. (1958) ‘A theoretical–empirical approach to the mechanism of particle entrainment from fluidized beds’, AIChE J, 4, 472.
157. Zhou, Y., Gan, Y., Wanless, E. J., Jameson, G. J. and Franks, G. V. (2008) ‘Influence of bridging forces on aggregation and consolidation of silica suspensions’, submitted.
158. Zhou, Z., Scales, P J. and Boger, D. V. (2001) ‘Chemical and physical control of the rheology of concentrated metal oxide suspensions’, Chem. Eng. Sci., 56, 2901–2920.