Polyelectrolyte complexes for tailoring of wood fibre surfaces

Advances in Polymer Science

Volumn 256, Issue , 2014, Pages 1-24

  Ankerfors, Caroline ^a   Wågberg, Lars ^b  

^a SWEREA KIMAB   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890926502     PISSN: 00653195     EISSN: None     Source Type: Book Series    
DOI: 10.1007/12_2012_206     Document Type: Article

References (68)

1. Davison RW (1972) Weak link in paper dry strength. Tappi 55:567-573
2. Page DH (1969) Theory for the tensile strength of paper. Tappi 52:674-681
3. LindströmT,Wagberg L, Larsson T (2005) On the nature of joint strength in paper-A review of dry and wet strength resins used in paper manufacturing. In: I'Anson SJ (ed) Advances in paper science and technology: Transactions of the13th fundamental research symposium, Cambridge, UK, Sept 2005. Pulp and Paper Fundamental Research Society, Bury, UK, pp 457-562
4. Torgnysdotter A, Wagberg L (2006) Tailoring of fibre/fibre joints in order to avoid the negative impacts of drying on paper properties. Nord Pulp Pap Res J 21:411-418
5. Decher G, Hong JD, Schmitt J (1992) Buildup of ultrathin multilayer films by a self-Assembly process: III. Consecutively alternating adsorption of anionic and cationic polyelectrolytes on charged surfaces. Thin Solid Films 210/211:831-835
6. Wagberg L, Forsberg S, Johansson A et al (2002) Engineering of fibre surface properties by application of the polyelectrolyte multilayer concept. Part I: Modification of paper strength. J Pulp Pap Sci 28:222-227
7. Page DH (1985) The mechanism of strength development of dried pulps by beating. Svensk Papperstid 88:R30-R35
8. Ankerfors C (2012) Polyelectrolyte complexes: Preparation, characterization, and use for control of wet and dry adhesion between surfaces. KTH Royal Institute of Technology, Stockholm
9. Petzold G, Lunkwitz K (1995) The interaction between polyelectrolyte complexes made from poly(dimethyldiallylammonium chloride) (PDMDAAC) and poly(maleic acid-co-α-methylstyrene) (P(MS-α-MeSty)) and cellulosic materials. Colloids Surf A 98:225-233
10. Bungenberg de Jong HG, Kryut HR (1929) Coacervation (partial miscibility in colloid systems). Proc Acad Sci Amsterdam 32:849
11. Dautzenberg H (2001) Polyelectrolyte complex formation in highly aggregating systems: Methodical aspects and general tendencies. In: Radeva T (ed) Physical chemistry of polyelectrolytes. Dekker, New York
12. Fleer GJ, Cohen Stuart MA, Scheutjens JMHM et al (1993) Electrostatic effects: Charged surfaces and polyelectrolyte adsorption. In: Polymers at interfaces. Chapman & Hall, London
13. Norde W (2003) Colloids and interfaces in life science. Marcel Dekker, New York
14. Van de Ven TGM (1989) Colloidal hydrodynamics. Academic, San Diego
15. Shubin V, Linse P (1995) Effect of electrolytes on adsorption of cationic polyacrylamide on silica: Ellipsometric study and theoretical modeling. J Phys Chem 99:1285-1291
16. Linse P, Wennerström H (2012) Adsorption versus aggregation. Particles and surface of the same material. Soft Matter 8:2486-2493
17. Ondaral S, Ankerfors C, Odberg L et al (2010) Surface-induced rearrangement of polyelectrolyte complexes: Influence of complex composition on adsorbed layer properties. Langmuir 26:14606-14614
18. Alince B, Kinkal J, Bednar F et al (2002) The role of free charge in the deposition of latex particles onto pulp fibers. In: Daniels ES, Sudol ED, El-Aasser MS (eds) ACS Symp Ser. American Chemical Society, Washington, DC
19. Gärdlund L, Wagberg L, Gernandt R (2003) Polyelectrolyte complexes for surface modification of wood fibres II. Influence of complexes on wet and dry strength of paper. Colloids Surf A 218:137-149
20. Biggs S, Sakai K, Addison T et al (2007) Layer-by-layer formation of smart particle coatings using oppositely charged block copolymer micelles. Adv Mater 19:247-250
21. Toomey R, Mays J, Holley DW et al (2005) Adsorption mechanisms of charged, amphiphilic diblock copolymers: The role of micellization and surface affinity. Macromolecules 38:5137-5143
22. Wittmer J, Joanny J-F (1993) Charged diblock copolymers at interfaces. Macromolecules 26:2691-2697
23. Kramer G, Somasundaran P (2004) Fluorescence and ESR studies of the conformational behavior of oppositely charged polyelectrolytes at solid/liquid interfaces. J Colloid Interface Sci 273:115-120
24. Hubbe MA, Moore SM, Lee SY (2005) Effects of charge ratios and cationic polymer nature on polyelectrolyte complex deposition onto cellulose. Ind Eng Chem Res 44:3068-3074
25. Saarinen T, Osterberg M, Laine J (2008) Adsorption of polyelectrolyte multilayers and complexes on silica and cellulose surfaces studied by QCM-D. Colloids Surf A 330:134-142
26. Norgren M, Gärdlund L, Notley SM et al (2007) Smooth model surfaces from lignin derivatives. II. Adsorption of polyelectrolytes and PECs monitored by QCM-D. Langmuir 23:3737-3743
27. Wagberg L, Lindström T (1987) Some fundamental aspects on dual component retention aid systems. Nord Pulp Pap Res J 2:49-55
28. Lofton MC, Moore SM, Hubbe MA et al (2005) Deposition of polyelectrolyte complexes as a mechanism for developing paper dry strength. Tappi J 4:3-8
29. Koljonen K, Vainio A, Hiltunen E et al (2003) The effect of polyelectrolyte adsorption on the strength properties of paper made from mixtures of mechanical and chemical pulps. In: Proceedings 5th International Paper and Coating Chemistry Symposium, Montreal, Canada, June 2003. Pulp and Paper Research Institute of Canada
30. Vainio A, Paulapuro H, Koljonen K et al (2006) The effect of drying stress and polyelectrolyte complexes on the strength properties of paper. J Pulp Pap Sci 32:9-13
31. Heermann ML, Welter SR, Hubbe MA(2006) Effects of high treatment levels in a dry-strength additive program based on deposition of polyelectrolyte complexes: How much glue is too much? Tappi J 5:9-14
32. Hubbe MA (2005) Dry-strength development by polyelectrolyte complex deposition onto nonbonding glass fibres. J Pulp Pap Sci 31:159-166
33. Lindström T (1989) Some fundamental chemical aspects on paper forming. In: Punton V and Baker CF (eds) Fundamentals of papermaking: Transactions 9th fundamental research symposium, Cambridge, Sept 1989. Mechanical Engineering Publications, London
34. Andersson K, Lindgren E (1996) Important properties of colloidal silica in microparticulate systems. Nord Pulp Pap Res J 11:15-21
35. Agarwal M, Lvov Y, Varahramyan K (2006) Conductive wood microfibres for smart paper through layer-by-layer nanocoating. Nanotechnology 17:5319-5325
36. Agarwal M, Xing Q, Shim BS et al (2009) Conductive paper from lignocellulose wood microfibers coated with a nanocomposite of carbon nanotubes and conductive polymers. Nanotechnology 20: 215602
37. Renneckar S, Zhou Y (2009) Nanoscale coatings on wood: Polyelectrolyte adsorption and layer-by-layer assembled film formation. ACS Appl Mater Interfaces 1:559-566
38. LindströmT, Söremark C, Westman L (1977) The influence on paper strength of dissolved and colloidal substances in the white water. Svensk Papperstid 80:341-345
39. Nylund J, Byman-Fagerholm H, Rosenholm JB (1993) Physico-chemical characterization of colloidal material in mechanical pulp. Nord Pulp Pap Res J 8:280-283
40. Li P, Pelton R (1992) Wood pulp washing. 1. Complex formation between kraft lignin and cationic polymers. Colloids Surf 64:217-222
41. Li P, Pelton R (1992) Wood pulp washing. 2. Displacement washing of aqueous lignin from model beds with cationic polymer solutions. Colloids Surf 64:223-234
42. Ström G (1984) For better or for worse: Polyelectrolyte complexes in the stock. Svensk Papperstid 87:14-16, 19-20
43. Ström G, Barla P, Stenius P (1979) The formation of lignin sulphonate-polyethyleneimine complexes and its influence on pulp drainage. Svensk Papperstid 82:408-413
44. Ström G, Barla P, Stenius P (1982) The effect on pine xylan on the use of some polycations as retention and drainage aids. Svensk Papperstid 85:R100-R106
45. Ström G, Barla P, Stenius P (1985) The formation of polyelectrolyte complexes between pine xylan and cationic polymers. Colloids Surf 13:193-207
46. Ström G, Stenius P (1981) Formation of complexes, colloids and precipitates in aqueous mixtures of lignin sulfonate and some cationic polymers. Colloids Surf 2:357-371
47. Odberg L, Ström G (1983) ESCA studies of retention and dewatering aids. The adsorption of polymin SN and polymin SN-lignosulfonate complexes on cellulose. Svensk Papperstid 86:R141-R145
48. Rojas OJ, Neuman RD (1999) Adsorption of polysaccharide wet-end additives in papermaking systems. Colloids Surf A 155:419-432
49. Vanerek A, van de Ven TGM (2006) Coacervate complex formation between cationic polyacrylamide and anionic sulfonated kraft lignin. Colloids Surf A 273:55-62
50. Ankerfors C, Ondaral S, Wagberg L et al (2010) Using jet mixing to prepare polyelectrolyte complexes: Complex properties and their interaction with silicon oxide surfaces. J Colloid Interface Sci 351:88-95
51. Johnson BK, Prud'homme RK (2003) Mechanism for rapid self-Assembly of block copolymer nanoparticles. Phys Rev Lett 91:118302
52. Petzold G, Schwartz S (2013) Polyelectrolyte complexes in flocculation applications. Adv Polym Sci. doi:10.1007/12-2012-205
53. Gärdlund L, Forsström J, Andreasson B et al (2005) Influence of polyelectrolyte complexes on the strength properties of papers from unbleached kraft pulps with different yields. Nord Pulp Pap Res J 20:36-42
54. Gärdlund L, Norgren M, Wagberg L et al (2007) The use of polyelectrolyte complexes (PECs) as strength additives for different pulps used for production of fine paper. Nord Pulp Pap Res J 22:210-216
55. Espy HH (1995) The mechanism of wet-strength development in paper: A review. Tappi J 78:90-99
56. Johnson BK, Prud'homme RK (2003) Chemical processing and micromixing in confined impinging jets. AIChE J 49:2264-2282
57. Eriksson M, Notley SM, Wagberg L (2005) The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibers. J Colloid Interface Sci 292:38-45
58. Lingström R, Wagberg L (2008) Polyelectrolyte multilayers on wood fibers: Influence of molecular weight on layer properties and mechanical properties of papers from treated fibers. J Colloid Interface Sci 328:233-242
59. Ankerfors C, LingströmR, Wagberg L et al (2009) A comparison of polyelectrolyte complexes and multilayers: Their adsorption behaviour and use for enhancing tensile strength of paper. Nord Pulp Pap Res J 24:77-86
60. Feng X, Pouw K, Leung V et al (2007) Adhesion of colloidal polyelectrolyte complexes to wet cellulose. Biomacromolecules 8:2161-2166
61. Feng X, Pelton R, Leduc M (2006) Mechanical properties of polyelectrolyte complex films based on polyvinylamine and carboxymethyl cellulose. Ind Eng Chem Res 45:6665-6671
62. Xiao L, Salmi J, Laine J et al (2009) The effects of polyelectrolyte complexes on dewatering of cellulose suspension. Nord Pulp Pap Res J 24:148-157
63. Arzt E, Gorb S, Spolenak R (2003) From micro to nano contacts in biological attachment devices. Proc Natl Acad Sci USA 100:10603-10606
64. Lamblet M, Verneuil E, Vilmin T et al (2007) Adhesion enhancement through micropatterning at polydimethylsiloxane-Acrylic adhesive interfaces. Langmuir 23:6966-6974
65. Bakker HE, Lindström SB, Sprakel J (2012) Geometry-And rate-dependent adhesive failure of micropatterned surfaces. J Phys Condens Matter 24:065103
66. Torgnysdotter A, Kulachenko A, Gradin P et al (2007) The link between the fiber contact zone and the physical properties of paper: A way to control paper properties. J Compos Mater 41:1619-1633
67. Ankerfors C, Johansson E, Pettersson T et al (2013) Use of polyelectrolyte complexes and multilayers from polymers and nanoparticles to create sacrificial bonds between surfaces. J Colloid Interface Sci 391:28-35
68. Bartlett MD, Croll AB, King DR et al (2012) Looking beyond fibrillar features to scale geckolike adhesion. Adv Mater 24:1078-1083