Functionalization of Olefinic Polymer and Copolymer Blends in the Melt

Polyolefin Blends

Volumn , Issue , 2007, Pages 269-304

  Jurkowski, Boleslaw ^a   Pesetskii, Stepan S ^b   Krivoguz, Yuri M ^b  

^a POZNAN UNIVERSITY OF TECHNOLOGY   (Poland)

^b VA Belyi Metal Polymer Research Institute of National Academy of Sciences of Belarus   (Belarus)

Author keywords

Electron donating monomers; Grafting efficiency and targeted influence; Thermally unstable peroxides

Indexed keywords

EID: 84890704216     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470199008.ch10     Document Type: Chapter

References (72)

1. G. Moad, Prog. Polym. Sci., 24, 94 (1999).
2. S. B. Brown, Annu. Rev. Mater. Sci., 21, 409 (1991).
3. F. Ciardelli, M. Aglietto, M. B. Coltelli, E. Passaglia, G. Ruggeri, and S. Coiai, Functionalization of polyolefins in the melt, in: Modification and Blending of Synthetic and Natural Chains, F. Ciardelli and S. Penczek (eds.), Kluwer Academic Publishers, Dordrecht, 2003, Chapter 4.
4. N. C. Liu and W. E. Baker, Adv. in Polym. Tech., 11, 249 (1992).
5. M. Xanthos (ed.), Reactive Extrusion, Hanser, Munich, 1992.
6. S. Al-Malaika (ed.), Reactive Modifiers for Polymers, Chapman and Hall, London, 1996.
7. T. C. (Mike) Chung, Functionalization of Polyolefins, Academic Press, San Diego, 2002.
8. S. Datta and D. J. Lohse, Polymeric Compatibilizers: Uses and Benefits in Polymer Blends, Hanser/Garder Publications Inc., Munich, 1996.
9. S. S. Pesetskii, B. Jurkowski, Y. M. Krivoguz, and R. Urbanowicz, J. Appl. Polym. Sci., 65, 1493 (1997).
10. A. V. Machado, Van M. Duin, and J. A. Covas, J. Polym. Sci. A Polym. Chem., 38, 3919 (2000).
11. A. V. Machado, J. A. Covas, and Van M. Duin, Polymer, 42, 3649 (2001).
12. S. S. Pesetskii, B. Jurkowski, and O. A. Makarenko, J. Appl. Polym. Sci., 86, 64 (2002).
13. Y. M. Krivoguz, S. S. Pesetskii, and Y. M. Pleskachevsky, Polym. Sci. Ser. A, 46, 698 (2004).
14. S. S. Pesetskii and B. Jurkowski, Reactive extrusion for processing of functionalized Polymers and Blended compositions, in: Proceedings of Polymer Composites-98 International Conference, Gomel, 1998, p. 36.
15. A. H. Hogt, J. Jelenic, and J. Meijer, Chemical modification of polypropylene by organic peroxides, in: Polymer Processing Society, European Meeting, 26-28 September, Stuttgart, 1995, p. 3-21.
16. S. S. Pesetskii, Y. M. Krivoguz, and A. P. Yuvchenko, Russ. J. Appl. Chem., 71, 1364 (1998).
17. S. S. Pesetskii, B. Jurkowski, Y. M. Krivoguz, and K. Kelar, Polymer, 42, 469 (2001).
18. S. S. Pesetskii and O. A. Makarenko, Russ. J. Appl. Chem., 75, 643 (2002).
19. L. F. Chen, B. Wong, and W. E. Baker, Polym. Eng. Sci., 36, 1596 (1996).
20. V. L. Antonovskii, Organic Peroxide Initiators, Khimia, Moscow, 1972 (in Russian).
21. R. Grego, G. Maglio, P. Musto, and G. Scarinzi, J. Appl. Polym. Sci., 37, 777 (1989).
22. A. D. Jekins and A. Ledwit, Reactive Mechanism and Structure in Polymer Chemistry, Wiley, London, 1977.
23. G.-H. Hu and M. Lambla, Materials Science and Technology-A comprehensive treatment,18, 345 (1997).
24. M. Lambla, Macromol. Symp., 83, 37 (1994).
25. G.-H. Hu, H. Li, L. Feng, and L. A. Pessau, J. Appl. Polym. Sci., 88, 1799 (2003).
26. R.-A. Tan, W. Wan, G.-H. Hu, and A. S. Gomes, Eur. Polym. J., 35, 1979 (1999).
27. T. Vainio, G.-H. Hu, M. Lambla, and J. Seppala, J. Appl. Polym. Sci., 63, 883 (1997).
28. K. E. Russel, Prog. Polym. Sci., 27, 1007 (2002).
29. G. Moad and D. H. Solomon, The Chemistry of Free Radical Polymerization, Pergamon, Oxford, 1995.
30. B. De Roover, J. Devaux, and R. J. Legras, J. Polym. Sci. A Polym. Chem., 34, 1195 (1996).
31. T. Bray, S. Damiris, A. Grase, G. Moad, M. O'skea, E. Rizzardo, and G. Van Diepen, Macromol. Symp., 129, 109 (1998).
32. A. H. Hogt, Solubility Aspects of Peroxides in Modification of Polymers and Polymer Blends, in: 2nd Conference on Advances in Additives and Modifiers for Polymer Blends, Philadelphia, 1993, pp. 1-17.
33. H.-Q. Xie and W. E. Baker, Novel azoinitiators for polyolefin modification and grafting, in: New Advances in Polyolefins, Chung T. G. (ed.), Plenum, New York, 1993, p. 101.
34. B. Turcsanyi, J. Appl. Polym. Sci., 76, 1976 (2000).
35. B. Turcsanyi, Polym. Bulletin, 30, 297 (1993).
36. B. Turcsanyi, Polym. Bull., 32, 713 (1994).
37. D. C. Nonhebel and J. C. Walton, Free-Radical Chemistry: Structure and Mechanism, University Press, Cambridge, 1974.
38. B. Wong and W. E. Baker, Annu. Tech. Conf. Soc. Plast. Eng., 54, 283,1996.
39. H. Hung and N. C. Liu, J. Appl. Polym. Sci., 67, 1957 (1998).
40. D. W. van Krevelen, Properties of Polymers: Correlations with Chemical Structure, Elsevier Publishing Co., Amsterdam, 1972.
41. A. A. Askadskii and Y. I. Matveev, Chemical Structure and Properties of Polymers, Khimia, Moscow, 1983 (in Russian).
42. M. M. Coleman, C. J. Serman, D. E. Bhagwagar, and P. C. Painter, Polymer, 31, 1187 (1990).
43. D. Braun, S. Richter, G. P. Hellmann, and M. J. Ratzsch, J. Appl. Polym. Sci., 68, 2019 (1998).
44. Chaoqin Li, Yong Zhang, and Yinxi Zhang, Polym. Test., 22, 191 (2003).
45. Y. M. Krivoguz and S. S. Pesetskii, Russ. J. Appl. Chem., 78, 305 (2005).
46. S.S. Pesetskii, B. Jurkowski, Y. M. Krivoguz, T. Tomczyk, and O. A. Makarenko, J. Appl. Polym. Sci, 102, 5095 (2006).
47. Y. M. Krivoguz, S. S. Pesetskii, B. Jurkowski, and T. Tomczyk, J. Appl. Polym. Sci., 102, 1746 (2006).
48. S. S. Pesetskii, B. Jurkowski, Y. M. Krivoguz, and Y. A. Olkhov, J. Appl. Polym. Sci., 81, 3439 (2001).
49. B. Jurkowski and B. Jurkowska, Sporzadzanie Kompozycii Polymrowych. Elementy Teorii i Praktyki (Polymer Compounding, Elements of Theory and Practice) Wydawnictwa Naukowo-Techniczne, Warsaw, 1995.
50. A. C.-Y. Wong and V. H. K. Cheung, Materials Processing Technology,67, 117 (1997).
51. A. H. Dekmezian, W. Weng, C. A. Garcia-Franco, and E. J. Markel, Polymer, 45, 5635 (2004).
52. B. Wunderlich, Macromolecular Physics, Vol. 1, Crystal Structure, Morphology, Defects, Academic Press, New York, 1973.
53. E. V. Prut and A. N. Zelenetskii, Russian Chem. Rev., 70, 72 (2001).
54. A. A. Bogoslavsky, Extrusion processed engineering materials based on blends of polyamide-6 and functionalized olefin polymers and copolymers: Dissertation thesis, Cand Sci. (Techn.) 05.02.01, V. A. Belyi Metal-Polymer Research Institute of NAS, Belarus, Gomel, 2004.
55. U. Mierau, D. Voigt, F. Böhme, and E. Brauer, J. Appl. Polym. Sci., 63, 283 (1997).
56. T. Kamfjord and Aa. Stori, Polymer, 42, 2767 (2001).
57. K. Naskar and J. W. M. Noordermeer, Rubber Chem. Technol., 76, 1001 (2003).
58. I. Keen, G. A. George, and P. M. Fredericks, J. Appl. Polym. Sci., 88, 1643 (2003).
59. K. Premphet and S. Chalearmthitipa, J. Appl. Polym. Sci., 41(11), 1978-1986 (2001).
60. C. S. Wu, H. T. Liao, and S. M. Lai, Polym. Plast. Technol., 41, 645 (2002).
61. P. He, H. Huang, Y. Zhang, and N. C. Lin, React. Func. Polym., 62, 25 (2005).
62. K. Sirisinha and D. Meksawat, J. Appl. Polym. Sci., 93, 901 (2004).
63. C. Jiao, Z. Wang, Z. Gui, and Y. Hu, Eur. Polym. J, 41, 1204 (2005).
64. T. J. Xue, D. Jiang, and C. A. Wilkie, Grafting of vinyl monomers onto polymers containing styrene in: 212th ACS National Meeting, Orlando, FL 25-29 August 1996 (Conference Paper).
65. E. Passaglia, S. Coiai, I. Ricci, and F. Crardelli, Polystyrene modification by reactive processing in the bulk, in: Atti XVI Convegno di Science e Tecnologia delle Macromolecole, Pisa 22-25 September, 2003.
66. E. Passaglia, S. Ghetti, F. Picchioni, and G. Ruggeri, Polymer, 41, 4389-4400 (2000).
67. D. R. Paul and S. Newman (eds.), Polymer Blends, Academic Press, New York, 1978.
68. G. H. B. Wang and X. Zhon, Mater. Lett., 58, 3457 (2004).
69. S. C. Wong and Y. W. Mai, Polymer, 40, 1553 (1999).
70. C. P. Papadopoulou and N. K. Kalfoglou, Polymer, 41, 2543 (2000).
71. A. Y. Coran, Thermoplastic elastomers based on elastomer-thermoplastic blends dynamically vulcanized, in: Thermoplastic Elastomers-A Comprehensive Review, N. R. Legge, G. Holden, and H. E. Schroeder (eds.), Hanser Publishers, Munich, 1987.
72. J. George, K. T. Varughese, and S. Thomas, Polymer, 41, 1507 (2000).