Peterson's Stress Concentration Factors, Third Edition

Peterson's Stress Concentration Factors, Third Edition

Volumn , Issue , 2008, Pages 1-522

  Pilkey, Walter D ^a   Pilkey, Deborah F ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890621381     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470211106     Document Type: Book

References (566)

1. ASTM, 1994, Annual Book of ASTM Standards, Vol. 03.01, American Society for Testing and Materials, Philadelphia, PA.
2. Boresi, A.P., Schmidt, R.J., and Sidebottom, O.M., 1993, Advanced Mechanics of Materials, 5th ed., Wiley, New York.
3. Cox, H.L., and Sopwith, D.G., 1937, The effect of orientation on stresses in single crystals and of random orientation on the strength of polycrystalline aggregates, Proc. Phys. Soc. London, Vol. 49, p. 134.
4. Creager, M., and Paris, P.C., 1967, Elastic field equations for blunt cracks with reference to stress corrosion cracking, Int. J. Fract. Mech., Vol. 3, pp. 247-252.
5. Davies, V.C., 1935, Discussion based on theses of S. K. Nimhanmimie and W. J. Huitt (Battersea Polytechnic), Proc. Inst. Mech. Eng. London, Vol. 131, p. 66.
6. Davis, E.A., and Manjoine, M.J., 1952, Effect of notch geometry on rupture strength at elevated temperature, Proc. ASTM, Vol. 52.
7. Draffin, J.O., and Collins,W.L., 1938, Effect of size and type of specimens on the torsional properties of cast iron, Proc. ASTM, Vol. 38, p. 235.
8. Durelli, A.J., 1982, Stress Concentrations, U.M. Project SF-CARS, School of Engineering, University of Maryland, Office of Naval Research, Washington, DC.
9. Eichinger, A., 1926, Versuche zur Klärung der Frage der Bruchgefahr, Proc. 2nd International Congress on Applied Mechanics, Zurich, Switzerland, p. 325.
10. Findley, W.N., 1951, Discussion of "Engineering steels under combined cyclic and static stresses" by H. J. Gough, 1949, Trans. ASME Appl. Mech. Sect., Vol. 73, p. 211.
11. Fralich, R.W., 1959, Experimental investigation of effects of random loading on the fatigue life of notched cantilever beam specimens of 7075-T6 aluminum alloy, NASA Memo 4-12-59L, National Aeronautics and Space Administration, Washington, DC.
12. Gough, H.J., 1933, Crystalline structure in relation to failure of metals, Proc. ASTM, Vol. 33, Pt. 2, p. 3.
13. Gough, H.J., and Clenshaw, W.J., 1951, Some experiments on the resistance of metals to fatigue under combined stresses, ARC R&M 2522, Aeronautical Research Council, London.
14. Gough, H.J., and Pollard, H.V., 1935, Strength of materials under combined alternating stress, Proc. Inst. Mech. Eng. London, Vol. 131, p. 1, Vol. 132, p. 549.
15. Gunn, N. J. R, 1952, Fatigue properties at low temperature on transverse and longitudinal notched specimens of DTD363A aluminum alloy, Tech. Note Met. 163, Royal Aircraft Establishment, Farnborough, England.
16. Hencky, H., 1924, Zur Theorie plastischer Deformationen und der Hierdurch im Material hervorgerufenen Nebenspannungen, Proc. 1st International Congress on Applied Mechanics, Delft, The Netherlands, p. 312.
17. Hohenemser, K., and Prager, W., 1933, Zur Frage der Ermüdungsfestigkeit bei mehrachsigen Spannungsust änden, Metall, Vol. 12, p. 342.
18. Houdremont, R., and Bennek, H., 1932, Federstähle, Stahl Eisen, Vol. 52, p. 660.
19. Howland, R. C.J., 1930, On the stresses in the neighborhood of a circular hole in a strip under tension, Trans. R. Soc. London Ser. A, Vol. 229, p. 67.
20. Ku, T.-C., 1960, Stress concentration in a rotating disk with a central hole and two additional symmetrically located holes, J. Appl. Mech., Vol. 27, Ser. E, No. 2, pp. 345-360.
21. Kuhn, P., and Hardrath, H.F., 1952, An engineering method for estimating notch-size effect in fatigue tests of steel, NACA Tech. Note 2805, National Advisory Committee on Aeronautics,Washington, DC.
22. Lazan, B.J., and Blatherwick, A.A., 1952, Fatigue properties of aluminum alloys at various direct stress ratios, WADC TR 52-306 Part I, Wright-Patterson Air Force Base, Dayton, OH.
23. Lazan, B.J., and Blatherwick, A.A., 1953, Strength properties of rolled aluminum alloys under various combinations of alternating and mean axial stresses, Proc. ASTM, Vol. 53, p. 856.
24. Lea, F.C., and Budgen, H.P., 1926, Combined torsional and repeated bending stresses, Engineering London, Vol. 122, p. 242.
25. Leven, M.M., 1955, Quantitative three-dimensional photoelasticity, Proc. SESA, Vol. 12, No. 2, p. 167.
26. Little, R.W., 1973, Elasticity, Prentice-Hall, Englewood Cliffs, NJ, p. 160.
27. Ludwik, P., 1931, Kerb-und Korrosionsdauerfestigkeit, Metall, Vol. 10, p. 705.
28. Marin, J., 1952, Engineering Materials, Prentice-Hall, Englewood Cliffs, NJ.
29. Murakami, Y., 1987, Stress Intensity Factor Handbook, Pergamon Press, Elmsford, NY.
30. Nadai, A., 1937, Plastic behavior of metals in the strain hardening range," J. Appl. Phys., Vol. 8, p. 203.
31. Neuber, H., 1958, Kerbspannungslehre, 2nd ed. (in German), Springer-Verlag, Berlin; translation, 1961, Theory of Notch Stresses, Office of Technical Services, U.S. Department of Commerce, Washington, DC, 1961 p. 207.
32. Neuber, H., 1968, Theoretical determination of fatigue strength at stress concentration, Rep. AFMLTR-68-20, Air Force Materials Laboratory, Wright-Patterson Air Force Base, Dayton, OH.
33. Newmark, N.M., Mosborg, R.J., Munse, W.H., and Elling, R.E., 1951, Fatigue tests in axial compression, Proc. ASTM, Vol. 51, p. 792.
34. Newton, R.E., 1940, A photoelastic study of stresses in rotating disks, J. Appl. Mech., Vol. 7, p. 57.
35. Nichols, R.W., Ed., 1969, A Manual of Pressure Vessel Technology, Elsevier, London, Chap. 3.
36. Nishida, M., 1976, Stress Concentration, Mori Kita Press, Tokyo (in Japanese).
37. Nisihara, T., and Kawamoto, A., 1940, The strength of metals under combined alternating stresses, Trans. Soc. Mech. Eng. Jpn., Vol. 6, No. 24, p. S-2.
38. Nisihara, T., and Kojima, K., 1939, Diagram of endurance limit of duralumin for repeated tension and compression, Trans. Soc. Mech. Eng. Jpn., Vol. 5, No. 20, p. I-1.
39. Ono, A., 1921, Fatigue of steel under combined bending and torsion, Mem. Coll. Eng. Kyushu Imp. Univ., Vol. 2, No. 2.
40. Ono, A., 1929, Some results of fatigue tests of metals, J. Soc. Mech. Eng. Jpn., Vol. 32, p. 331.
41. Peterson, R.E., 1933a, Stress concentration phenomena in fatigue of metals, Trans. ASME Appl. Mech. Sect., Vol. 55, p. 157.
42. Peterson, R.E., 1933b, Model testing as applied to strength of materials, Trans. ASME Appl. Mech. Sect., Vol. 55, p. 79.
43. Peterson, R.E., 1938, Methods of correlating data from fatigue tests of stress concentration specimens, Stephen Timoshenko Anniversary Volume, Macmillan, New York, p. 179.
44. Peterson, R.E., 1943, Application of stress concentration factors in design, Proc. Soc. Exp. Stress Anal., Vol. 1, No. 1, p. 118.
45. Peterson, R.E., 1945, Relation between life testing and conventional tests of materials, ASTA Bull., p. 13.
46. Peterson, R.E., 1950, Relation between stress analysis and fatigue of metals, Proc. Soc. Exp. Stress Anal., Vol. 11, No. 2, p. 199.
47. Peterson, R.E., 1952, Brittle fracture and fatigue in machinery, in Fatigue and Fracture of Metals, Wiley, New York, p. 74.
48. Peterson, R.E., 1953, Stress Concentration Design Factors, Wiley, New York.
49. Peterson, R.E., 1959, Analytical approach to stress concentration effect in aircraft materials, Tech. Rep. 59-507, U.S. Air Force-WADC Symposium on Fatigue of Metals, Dayton, OH, p. 273.
50. Peterson, R.E., 1974, Stress Concentration Factors, Wiley, New York.
51. Peterson, R.E., andWahl, A.M., 1936, Two and three dimensional cases of stress concentration and comparison with fatigue tests, Trans. ASME Appl. Mech. Sect., Vol. 57, p. A-15.
52. Pilkey, W.D., 2005, Formulas for Stress, Strain, and Structural Matrices, 2nd ed., Wiley, Hoboken, NJ.
53. Pilkey, W.D., and Wunderlich, W., 1993, Mechanics of Structures: Variational and Computational Methods, CRC Press, Boca Raton, FL.
54. Prager, W., and Hodge, P.G., 1951, Theory of Perfectly Plastic Solids, Wiley, New York.
55. Roark, R.J.,Hartenberg, R.S., andWilliams, R.Z., 1938, The influence of form and scale on strength, Univ. Wisc. Exp. Stn. Bull. 84.
56. Rôs,M., and Eichinger, A., 1950, Die Bruchgefahr fester Kôrper, Eidg.Materialpruef. Ber., Vol. 173.
57. Sachs, G., 1928, Zur Ableitung einer Fliessbedingung, Z. VDI, Vol. 72, p. 734.
58. Shin, C.S., Man, K.C., andWang, C.M., 1994, Apractical method to estimate the stress concentration of notches, Int. J. Fatigue, Vol. 16, No. 4, pp. 242-256.
59. Sih, G.C., 1973, Handbook of Stress Intensity Factors, Lehigh University, Bethlehem, PA.
60. Smith, J.O., 1942, The effect of range of stress on the fatigue strength of metals, Univ. Ill. Exp. Stn. Bull. 334.
61. Soderberg, C.R., 1930, Working stress, Trans. ASME, Vol. 52, Pt. 1, p. APM 52-2.
62. Steele, M.C., Liu, C.K., and Smith, J.O., 1952, Critical review and interpretation of the literature on plastic (inelastic) behavior of engineering metallic materials, research report, Department of Theoretical and Applied Mechanics, University of Illinois, Urbana, IL.
63. Templin, R.L., 1954, Fatigue of aluminum, Proc. ASTM, Vol. 54, p. 641.
64. Timoshenko, S., and Goodier, J.N., 1970, Theory of Elasticity, McGraw-Hill, New York.
65. Van den Broek, J.A., 1942, Theory of Limit Design, Wiley, New York.
66. Von Mises, R., 1913, Mechanik der festen Kôrper im plastisch deformablen Zustand, Nachr. Ges. Wiss. Goettingen Jahresber. Geschaeftsjahr. Math.-phys. Kl., p. 582.
67. Von Phillipp, H.A., 1942, Einfluss von Querschittsgrôsse und Querschittsform auf die Dauerfestigkeit bei ungleichmässig verteilten Spannungen, Forschung, Vol. 13, p. 99.
68. Neuber, H., 1958, Theory of Notch Stresses, 2nd ed., Springer-Verlag, Berlin; translation, 1961, Office of Technical Services, U.S. Department of Commerce, Washington, DC.
69. Nishida, M., 1976, Stress Concentration, Mori Kita Press, Tokyo (in Japanese).
70. Pilkey, W.D., 2005, Formulas for Stress, Strain, and Structural Matrices, 2nd ed., Wiley, Hoboken, NJ.
71. Savin, G.N., 1961, Stress Concentration Around Holes, Pergamon Press, London (English translation editor, W. Johnson).
72. Savin, G.N., and Tulchii,V.I., 1976, Handbook on Stress Concentration,Higher Education Publishing House (Chinese translation, Heilongjiang Science and Technology Press, Harbin, China).
73. Young, W.C., 1989, Roark's Formulas for Stress and Strain, 7th ed., McGraw-Hill, New York.
74. www.stressconcentrationfactors.com, discussion forums and errata related to this book.
75. Appl, F.J., and Koerner, D.R., 1968, Numerical analysis of plane elasticity problems, Proc. Am. Soc. Civ. Eng., Vol. 94, p. 743.
76. Appl, F.J., and Koerner, D.R., 1969, Stress concentration factors for U-shaped, hyperbolic and roundedV-shaped notches,ASMEPap. 69-DE-2, Engineering Society Library, UnitedEngineering Center, New York.
77. Atsumi, A., 1958, Stress concentration in a strip under tension and containing an infinite row of semicircular notches, Q. J. Mech. Appl. Math., Vol. 11, Pt. 4, p. 478.
78. Atsumi, A., 1967, Stress concentrations in a strip under tension and containing two pairs of semicircular notches placed on the edges symmetrically, Trans. ASME Appl. Mech. Sect., Vol. 89, p. 565.
79. Barrata, F.I., 1972, Comparison of various formulae and experimental stress-concentration factors for symmetrical U-notched plates, J. Strain Anal., Vol. 7, p. 84.
80. Barrata, F, I., and Neal, D.M., 1970, Stress concentration factors in U-shaped and semi-elliptical shaped edge notches, J. Strain Anal., Vol. 5, p. 121.
81. Bowie, O.L., 1963, Rectangular tensile sheet with symmetric edge cracks, AMRA TR 63-22, Army Materials and Mechanics Research Center, Watertown, MA.
82. Bowie, O.L., 1966, Analysis of edge notches in a semi-infinite region, AMRA TR 66-07, Army Materials and Mechanics Research Center, Watertown, MA.
83. Brown,W.F., and Strawley, J.E., 1966, Plane strain crack toughness testing of high strength metallic materials, STP 410, American Society for Testing and Materials, Philadelphia, PA, p. 11.
84. Cheng, Y.F., 1970, Stress at notch root of shafts under axially symmetric loading, Exp. Mech., Vol. 10, p. 534.
85. Ching, A., Okubo, S., and Tsao, C.H., 1968, Stress concentration factors for multiple semi-elliptical notches in beams under pure bending, Exp. Mech., Vol. 8, p. 19N.
86. Cole, A.G., and Brown, A. F.C., 1958, Photoelastic determination of stress concentration factors caused by a single U-notch on one side of a plate in tension, J. R. Aeronaut. Soc., Vol. 62, p. 597.
87. Cowper, G.R., 1962, Stress concentrations around shallow spherical depressions in a flat plate, Aeronaut. Rep. LR-340, National Research Laboratories, Ottawa, Ontario, Canada.
88. Denardo, B.P., 1968, Projectile shape effects on hypervelocity impact craters in aluminum, NASA TN D-4953, National Aeronautics and Space Administration, Washington, DC.
89. Dixon, J.R., 1962, Stress distribution around edge slits in a plate loaded in tension: the effect of finite width of plate, J. R. Aeronaut. Soc., Vol. 66, p. 320.
90. Durelli, A.J., Lake, R.L., and Phillips, E., 1952, Stress concentrations produced by multiple semicircular notches in infinite plates under uniaxial state of stress, Proc. Soc. Exp. Stress Anal., Vol. 10, No. 1, p. 53.
91. ESDU 1981, 1989, Stress Concentrations, Engineering Science Data Unit, London.
92. Eubanks, R.A., 1954, Stress concentration due to a hemispherical pit at a free surface, Trans. ASME Appl. Mech. Sect., Vol. 76, p. 57.
93. Flynn, P.D., and Roll, A, A., 1966, Re-examination of stresses in a tension bar with symmetrical U-shaped grooves, Proc. Soc. Exp. Stress Anal., Vol. 23, Pt. 1, p. 93.
94. Flynn, P.D., and Roll, A.A., 1967, A comparison of stress concentration factors in hyperbolic and U-shaped grooves, Proc. Soc. Exp. Stress Anal., Vol. 24, Pt. 1, p. 272.
95. Frocht, M.M., 1935, Factors of stress concentration photoelasticity determined, Trans. ASME Appl. Mech. Sect., Vol. 57, p. A-67.
96. Frocht, M.M., and Landsberg, D., 1951, Factors of stress concentration in bars with deep sharp grooves and fillets in torsion, Trans. ASME Appl. Mech. Sect., Vol. 73, p. 107.
97. Gray, T. G.F., Tournery, F., Spence, J., and Brennan, D., 1995, Closed-form functions for elastic stress concentration factors in notched bars, J. Strain Anal., Vol. 30, p. 143.
98. Grayley, M.E., 1979, Estimation of the stress concentration factors at rectangular circumferential grooves in shafts under torsion, ESDU Memo. 33, Engineering Science Data Unit, London.
99. Hamada, M., and Kitagawa, H., 1968, Elastic torsion of circumferentially grooved shafts, Bull. Jpn. Soc. Mech. Eng., Vol. 11, p. 605.
100. Hartman, J.B., and Leven, M.M., 1951, Factors of stress concentration in bars with deep sharp grooves and fillets in tension, Proc. Soc. Exp. Stress Anal., Vol. 8, No. 2.
101. Hetényi, M., 1943, The distribution of stress in threaded connections, Proc. Soc. Exp. Stress Anal., Vol. 1, No. 1, p. 147.
102. Hetényi, M. and Liu, T.D., 1956, Method for calculating stress concentration factors, J. Appl. Mech., Vol. 23.
103. Heywood, R.B., 1952, Designing by Photoelasticity, Chapman & Hall, London, p. 163.
104. Hooke, C.J., 1968, Numerical solution of plane elastostatic problems by point matching, J. Strain Anal., Vol. 3, p. 109.
105. Inglis, C.E., 1913, Stresses in a plate due to the presence of cracks and sharp corners, Engineering (London), Vol. 95, p. 415.
106. Irwin, G.R., 1958, Fracture, in Encyclopedia of Physics, Vol. 6, Springer-Verlag, Berlin, p. 565.
107. Irwin, G.R., 1960, Fracture mechanics, in Structural Mechanics, Pergamon Press, Elmsford, NY.
108. Isida, M., 1953, On the tension of the strip with semi-circular notches, Trans. Jpn. Soc. Mech. Eng., Vol. 19, p. 5.
109. Isida, M., 1955, On the tension of a strip with a central elliptic hole, Trans. Jpn. Soc. Mech. Eng., Vol. 21.
110. Kikukawa, M., 1962, Factors of stress concentration for notched bars under tension and bending, Proc. 10th International Congress on Applied Mechanics, Elsevier, New York, p. 337.
111. Kitagawa, H., and Nakade, K., 1970, Stress concentrations in notched strip subjected to in-plane bending, Technol. Rep. of Osaka Univ., Vol. 20, p. 751.
112. Koiter, W.T., 1965, Note on the stress intensity factors for sheet strips with crack under tensile loads, Rep. 314, Laboratory of Engineering Mechanics, Technological University, Delft, The Netherlands.
113. Lee, G.H., 1940, The influence of hyperbolic notches on the transverse flexure of elastic plates, Trans. ASME Appl. Mech. Sect., Vol. 62, p. A-53.
114. Leibowitz, H., Vandervelt, H., and Sanford, R.J., 1967, Stress concentrations due to sharp notches, Exper. Mech., Vol. 7, p. 513.
115. Leven, M. M,, 1955, Quantitative three-dimensional photoelasticity, Proc. SESA, Vol. 12, No. 2, p. 167.
116. Leven, M.M., and Frocht, M.M., 1953, Stress concentration factors for a single notch in a flat plate in pure and central bending, Proc. SESA, Vol. 11, No. 2, p. 179.
117. Ling, C.-B., 1967, On stress concentration at semicircular notch, Trans. ASME Appl. Mech. Sect., Vol. 89, p. 522.
118. Ling, C.-B., 1968, On stress concentration factor in a notched strip, Trans. ASME Appl. Mech. Sect., Vol. 90, p. 833.
119. Matthews, G.J., and Hooke, C.J., 1971, Solution of axisymmetric torsion problems by point matching, J. Strain Anal., Vol. 6, p. 124.
120. Moore, R.R., 1926, Effect of grooves, threads and corrosion upon the fatigue of metals, Proc. ASTM, Vol. 26, Pt. 2, p. 255.
121. Neuber, H., 1946, Theory of Notch Stresses: Principle for ExactCalculation of Strengthwith Reference to Structural Form and Material, J.W. Edwards Co., Ann Arbor, MI.
122. Neuber, H., 1958, Kerbspannungslehre, 2nd ed., Springer-Verlag, Berlin; translation, 1961, Theory of Notch Stresses, Office of Technical Services, U.S. Department of Commerce,Washington, DC.
123. Nishioka, K. and Hisamitsu, N., 1962, On the stress concentration in multiple notches, Trans. ASME Appl. Mech. Sect., Vol. 84, p. 575.
124. Nisitani, H., and Noda, N., 1984, Stress concentration of a cylindrical bar with a V-shaped circumferential groove under torsion, tension or bending, Eng. Fract. Mech., Vol. 20, p. 743.
125. Noda, N., and Takase, Y., 1999, Stress concentration formulas useful for any shape of notch in a round test specimen under tension and under bending, Fatigue Fract. Eng. Mater. Struct., Vol. 22, p. 1071.
126. Noda,N., Sera,M., and Takase,Y., 1995, Stress concentration factors for round and flat test specimens with notches, Int. J. Fatigue, Vol. 17, p. 163.
127. Okubo, H., 1952, Approximate approach for torsion problem of a shaft with a circumferential notch, Trans. ASME Appl. Mech. Sect., Vol. 54, p. 436.
128. Okubo, H., 1953, Determination of surface stress by means of electroplating, J. Appl. Phys., Vol. 24, p. 1130.
129. Paris, P.C., and Sih, G.C., 1965, Stress analysis of cracks, ASTM Spec. Tech. Publ. 381, American Society for Testing and Materials, Philadelphia, PA, p. 34.
130. Peterson, R.E., 1953, Stress Concentration Design Factors, Wiley, New York.
131. Peterson, R.E., 1974, Stress Concentration Factors, Wiley, New York.
132. Pilkey, W.D., 2005, Formulas for Stress, Strain, and Structural Matrices, 2nd ed.,Wiley, New York.
133. Reed, R.E., and Wilcox, P.R., 1970, Stress concentration due to a hyperboloid cavity in a thin plate, NASA TN D-5955, National Aeronautics and Space Administration, Washington, DC.
134. Rubenchik, V.Y., 1975, Stress concentration close to grooves, Vestn. Mashin., Vol. 55, No. 12, pp. 26-28.
135. Rushton, K.R., 1964, Elastic stress concentrations for the torsion of hollow shouldered shafts determined by an electrical analogue, Aeronaut. Q., Vol. 15, p. 83.
136. Rushton, K.R., 1967, Stress concentrations arising in the torsion of grooved shafts, J. Mech. Sci., Vol. 9, p. 697.
137. Schulz, K.J., 1941, Over den Spannungstoestand in doorborde Platen (On the state of stress in perforated plates), Doctoral thesis, Technische Hochschule, Delft, The Netherlands.
138. Schulz, K.J., 1942, On the state of stress in perforated strips and plates, Proc. Koninkïyke Nederlandsche Akadamie van Wetenschappen (Netherlands Royal Academy of Science), Amsterdam, Vol. 45, pp. 233, 341, 457, 524.
139. Schulz, K.J., 1943-1945, On the state of stress in perforated strips and plates, Proc. Koninkïyke Nederlandsche Akadamie vanWetenschappen (Netherlands Royal Academy of Science), Amsterdam, Vol. 46-48, pp. 282, 292.
140. Seika, M., 1960, Stresses in a semi-infinite plate containing a U-type notch under uniform tension, Ing.-Arch., Vol. 27, p. 20.
141. Shioya, S., 1959, The effect of square and triangular notches with fillets on the transverse flexure of semi-infinite plates, Z. Angew. Math. Mech., Vol. 39, p. 300.
142. Shioya, S., 1960, On the transverse flexure of a semi-infinite plate with an elliptic notch, Ing.-Arch., Vol. 29, p. 93.
143. Shioya, S., 1963, The effect of an infinite row of semi-circular notches on the transverse flexure of a semi-infinite plate, Ing.-Arch., Vol. 32, p. 143.
144. Slot, T., 1972, Stress Analysis of Thick Perforated Plates, Technomic Publishing Co., Westport, CT.
145. Sobey, A.J., 1965, Stress concentration factors for round rectangular holes in infinite sheets, ARC R&M 3407, Aeronautical Research Council, London.
146. Suzuki, S.I., 1967, Stress analysis of a semi-infinite plate containing a reinforced notch under uniform tension, Int. J. Solids Struct., Vol. 3, p. 649.
147. Troyani, N., Hernández, S.I., Villarroel, G., Pollonais, Y., and Gomes, C., 2004, Theoretical stress concentration factors for short flat bars with opposite U-shaped notches subjected to in-plane bending, Int. J. Fatigue, Vol. 26, pp. 1303-1310.
148. Tsao, C.H., Ching, A., and Okubo, S., 1965, Stress concentration factors for semi-elliptical notches in beams under pure bending, Exp. Mech., Vol. 5, p. 19A.
149. Weber, C., 1942, Halbebene mit periodisch gewelltem Rand, Z. Angew. Math. Mech., Vol. 22, p. 29.
150. Westergaard, H.M., 1939, Bearing pressures and cracks, Trans. ASME Appl. Mech. Sect., Vol. 61, p. A-49.
151. Wilson, I.H., and White, D.J., 1973, Stress concentration factors for shoulder fillets and grooves in Plates, J. Strain Anal., Vol. 8, p. 43.
152. Wilson, W.K., 1970, Stress intensity factors for deep cracks in bending and compact tension specimens, in Engineering Fracture Mechanics, Vol. 2, Pergamon Press, London.
153. Allison, I.M., 1961a, The elastic stress concentration factors in shouldered shafts, Aeronaut. Q., Vol. 12, p. 189.
154. Allison, I.M., 1961b, The elastic concentration factors in shouldered shafts: II, Shafts subjected to bending, Aeronaut. Q., Vol. 12, p. 219.
155. Allison, I.M., 1962, The elastic concentration factors in shouldered shafts: III, Shafts subjected to axial load, Aeronaut. Q., Vol. 13, p. 129.
156. Appl, F.J., and Koerner, D.R., 1969, Stress concentration factors for U-shaped, hyperbolic and rounded V-shaped notches, ASME Pap. 69-DE-2, American Society of Mechanical Engineers, New York.
157. Battenbo, H., and Baines, B.H., 1974, Numerical stress concentrations for stepped shafts in torsion with circular and stepped fillets, J. Strain Anal., Vol. 2, pp. 90-101.
158. Baud, R.V., 1928, Study of stresses by means of polarized light and transparencies, Proc. Eng. Soc. West. Pa., Vol. 44, p. 199.
159. Baud, R.V., 1934, Beiträge zurKenntnis der Spannungsverteilung in Prismatischen und Keilfôrmigen Konstruktionselementen mit Querschnittsübergängen, Eidg. Materialprüf. Ber., Vol. 83, Zurich; see also Prod. Eng., 1934, Vol. 5, p. 133.
160. Berkey, D.C., 1944, Reducing stress concentration with elliptical fillets, Proc. Soc. Exp. Stress Anal., Vol. 1, No. 2, p. 56.
161. Clock, L.S., 1952, Reducing stress concentration with an elliptical fillet, Des. News, May 15.
162. Derecho, A.T., and Munse, W.H., 1968, Stress concentration at external notches in members subjected to axial loading, Univ. Ill. Eng. Exp. Stn. Bull. 494.
163. ESDU, 1981, 1989, Stress Concentrations, Engineering Science Data Unit, London.
164. Fessler, H., Rogers, C.C., and Stanley, P., 1969, Shouldered plates and shafts in tension and torsion, J. Strain Anal., Vol. 4, p. 169.
165. Frocht,M.M., 1935, Factors of stress concentration photoelastically determined, Trans. ASME Appl. Mech. Sect., Vol. 57, p. A-67.
166. Gooyer, L.E., and Overbeeke, J.L., 1991, The stress distributions in shoulder shafts under axisymmetric loading, J. Strain Anal., Vol. 26, No. 3, pp. 181-184.
167. Griffin, D.S., and Kellogg, R.B., 1967, A numerical solution for axially symmetrical and plane elasticity problems, Int. J. Solids Struct., Vol. 3, p. 781.
168. Griffin, D.S., and Thurman, A.L., 1967, Comparison of DUZ solution with experimental results for uniaxially and biaxially loaded fillets and grooves," WAPD TM-654, Clearinghouse for Scientific and Technical Information, Springfield, VA.
169. Grodzinski, P., 1941, Investigation on shaft fillets, Engineering (London), Vol. 152, p. 321.
170. Gwaltney, R.C., Corum, J.M., and Greenstreet, W.L., 1971, Effect of fillets on stress concentration in cylindrical shells with step changes in outside diameter, Trans. ASME J. Eng. Ind., Vol. 93, p. 986.
171. Hardy, S.J., and Malik, N.H., 1992, A survey of post-Peterson Stress concentration factor data, Int. J. Fatigue, Vol. 14, p.149.
172. Heifetz, J.H., and Berman, I., 1967, Measurements of stress concentration factors in the external fillets of a cylindrical pressure vessel, Exp. Mech., Vol. 7, p. 518.
173. Heywood, R.B., 1969, Photoelasticity for Designers, Pergamon Press, Elmsford, NY, Chap. 11.
174. Jacobsen, L.S., 1925, Torsional stress concentrations in shafts of circular cross section and variable diameter, Trans. ASME Appl. Mech. Sect., Vol. 47, p. 619.
175. Kumagai, K., and Shimada, H., 1968, The stress concentration produced by a projection under tensile load, Bull. Jpn. Soc. Mech. Eng., Vol. 11, p. 739.
176. Lee, L. H.N., and Ades, C.S., 1956, Stress concentration factors for circular fillets in stepped walled cylinders subject to axial tension, Proc. Soc. Exp. Stress Anal., Vol. 14, No. 1.
177. Leven, M.M., 1965, Stress distribution in a cylinderwith an external circumferential fillet subjected to internal pressure, Res. Memo. 65-9D7-520-M1,Westinghouse Research Laboratories, Pittsburgh, PA.
178. Leven, M.M., and Hartman, J.B., 1951, Factors of stress concentration for flat bars with centrally enlarged section, Proc. SESA, Vol. 19, No. 1, p. 53.
179. Lurenbaum, K., 1937, Ges. Vortrage der Hauptvers. der Lilienthal Gesell., p. 296.
180. Matthews, G.J., and Hooke, C.J., 1971, Solution of axisymmetric torsion problems by point matching, J. Strain Anal., Vol. 6, p. 124.
181. McAdam, D.J., 1923, Endurance properties of steel, Proc. ASTM, Vol. 23, Pt. II, p. 68.
182. Morgenbrod, W., 1939, Die Gestaltfestigkeit von Wälzen und Achsen mit Hohlkehlen, Stahl Eisen, Vol. 59, p. 511.
183. Oschatz, H., 1933, Gesetzmässigkeiten des Dauerbruches und Wege zur Steigerung der Dauerhaltbarkeit, Mitt. Materialprüfungsanst. Tech. Hochsch. Darmstadt, Vol. 2.
184. Peterson, R.E., 1930, Fatigue tests of small specimens with particular reference to size effect, Proc. Am. Soc. Steel Treatment, Vol. 18, p. 1041.
185. Peterson, R.E., 1953, Stress Concentration Design Factors, Wiley, New York.
186. Rushton, K.R., 1964, Elastic stress concentration for the torsion of hollow shouldered shafts determined by an electrical analogue, Aeronaut. Q., Vol. 15, p. 83.
187. Scheutzel, B., and Gross, D., 1966, Konstruktion, Vol. 18, p. 284.
188. Spangenberg, D., 1960, Konstruktion, Vol. 12, p. 278.
189. Thum, A., and Bautz, W., 1934, Der Entlastungsübergang: Günstigste Ausbildung des Überganges an abgesetzten Wellen u. dg., Forsch. Ingwes., Vol. 6, p. 269.
190. Thum, A., and Bruder, E., 1938, Dauerbruchgefahr an Hohlkehlen von Wellen und Achsen und ihre Minderung, Deutsche Kraftfahrtforschung im Auftrag des Reichs-Verkehrsministeriums, No. 11, VDI Verlag, Berlin.
191. Timoshenko, S., and Goodier, J.N., 1970, Theory of Elasticity, 3rd ed., McGraw-Hill, New York, p. 398.
192. Tipton, S.M., Sorem, J.R., and Rolovic, R.D., 1996, Updated stress concentration factors for filleted shafts in bending and tension, J. Mech. Des., Vol. 118, p. 321.
193. Troyani, N., Marin, A., Garcia, H., Rodriguez, F., and Rodriguez, S., 2003, Theoretical stress concentration factors for short shouldered plates subjected to uniform tension, J. Strain Anal. Eng. Des., Vol. 38, pp. 103-113.
194. Weigand, A., 1943, Ermittlung der Formziffer der auf Verdrehung beanspruchten abgesetzen Welle mit Hilfe von Feindehnungsmessungen, Luftfahrt Forsch., Vol. 20, p. 217.
195. Wilson, I.H., and White, D.J., 1973, Stress concentration factors for shoulder fillets and grooves in Plates, J. Strain Anal., Vol. 8, p. 43.
196. ASME, 1974, ASME Boiler and Pressure Vessel Code: Pressure Vessels, Section VIII, American Society of Mechanical Engineers, New York, p. 30.
197. ASTM, 1994, Annual Book of ASTM Standards, Vol. 03.01, American Society for Testing and Materials, Philadelphia, PA.
198. Atsumi, A., 1958, Stress concentration in a strip under tension and containing an infinite row of semicircular notches, Q. J. Mech. Appl. Math., Vol. 11, p. 478.
199. Atsumi, A., 1960, Stresses in a circular cylinder having an infinite row of spherical cavities under tension, Trans. ASME Appl. Mech. Sect., Vol. 82, p. 87.
200. Badr, E.A., 2006, Stress concentration factors for pressurized elliptic crossbores in blocks, Int. J. Pressure Vessels Piping, Vol. 83, p. 442.
201. Bailey, R., and Hicks, R., 1960, Behavior of perforated plates under plane stress, J. Mech. Eng. Sci., Vol. 2, p. 143.
202. Barbero, E.J., 1998, Introduction to Composite Materials Design, Taylor & Francis, Philadelphia, PA.
203. Barnhart, K.E., Hale, A.L., and Meriam, J.L., 1951, Stresses in rotating disks due to non-central holes, Proc. Soc. Exp. Stress Anal., Vol. 9, No. 1, p. 35.
204. Barrett, R.F., Seth, P.R., and Patel, G.C., 1971, Effect of two circular holes in a plate subjected to pure shear stress, Trans. ASME Appl. Mech. Sect., Vol. 93, p. 528.
205. Belie, R.G., and Appl., F.J., 1972, Stress concentration in tensile strips with large circular holes, xp. Mech., Vol. 12, p. 190; discussion, 1973, Vol. 13, p. 255.
206. Beskin, L., 1944, Strengthening of circular holes in plates under edge forces, Trans. ASME Appl. Mech. Sect., Vol. 66, p. A-140.
207. Bickley, W.G., 1928, Distribution of stress round a circular hole in a plate, Philos. Trans. R. Soc. (London) Ser. A, Vol. 227, p. 383.
208. Billevicz, V., 1931, Analysis of stress in circular rings, Ph.D. dissertation, University of Michigan, Ann Arbor, MI.
209. Brown, W. F, and Srawley, S.R., 1966, Plane Strain Crack Toughness Testing of High Strength Metallic Materials, American Society for Testing and Materials, Philadelphia, PA.
210. Buivol, V.N., 1960, Experimental investigations of the stressed state of multiple connected plates, Prikl. Mekh., Vol. 3, p. 328 (in Ukranian).
211. Buivol, V.N., 1962, Action of concentrated forces on a plate with holes, Prikl. Mekh., Vol. 8, No. 1, p. 42 (in Ukranian).
212. Chen, P.S., and Archer, R.R., 1989, Stress concentration factors due to the bending of a thick plate with circular hole, Ing. Arch., Vol. 59, p. 401.
213. Cheng, Y.F., 1968, A photoelastic study of stress concentration factors at a doubly-symmetric hole in finite strips under tension, Trans. ASME Appl. Mech. Sect., Vol. 90, p. 188.
214. Cheng, Y.F., 1978, Stress concentration factors for a countersunk hole in a flat bar in tension and transverse bending, Trans. ASME Appl. Mech. Sect., Vol. 45, p. 929.
215. Christiansen, S., 1968, Numerical determination of stresses in a finite or infinite plate with several holes of arbitrary form, Z. Angew. Math. Mech., Vol. 48, p. T131.
216. Chu, W.L., and Conway, D.H., 1970, A numerical method for computing the stresses around an axisymmetrical inclusion, Int. J. Mech. Sci., Vol. 12, p. 575.
217. Coker, E.G., and Filon, L. N.G., 1931, A Treatise on Photoelasticity, Cambridge University Press, Cambridge, p. 486.
218. Cox, H.L., 1953, Four studies in the theory of stress concentration, Rep. 2704, Aeronautical Research Council, London.
219. Cox, H.L., and Brown, A. F.C., 1964, Stresses round pins in holes, Aeronaut. Q., Vol. 15, p. 357.
220. Daniel, I.M., 1970, Photoelastic analysis of stresses around oblique holes, Exp. Mech., Vol. 10, p. 467.
221. Davies, G. A.O., 1963, Stresses around a reinforced circular hole near a reinforced straight edge, Aeronaut. Q., Vol. 14, pp. 374-386.
222. Davies, G. A.O., 1965, Stresses in a square plate having a central circular hole, J. R. Aeronaut. Soc., Vol. 69, p. 410.
223. Davies, G. A.O., 1967, Plate-reinforced holes, Aeronaut. Q., Vol. 18, p. 43.
224. Dhir, S.K., and Brock, J.S., 1970, A new method of reinforcing a hole effecting large weight savings, Int. J. Solids Struct., Vol. 6, p. 259.
225. Dixon, J.R., 1960, Stress distribution around a central crack in a plate loaded in tension: effect on finite width of plate, J. R. Aeronaut. Soc., Vol. 64, p. 141.
226. Dixon, R.D., Peters, D.T., and Keltjens, J. G. M, 2002, Stress concentration factors of cross-bores in thick walled cylinders and square blocks, J. Pressure Vessel Technol., Vol. 436, p. 31; see also Vol. 126, No. 2, pp. 184-187 (2004).
227. Donnell, L.H., 1941, Stress concentrations due to elliptical discontinuities in plates under edge forces, Van Karman Anniversary Volume, California Institute of Technology, Pasadena, CA, p. 293.
228. Drucker, D.C., 1942, The photoelastic analysis of transverse bending of plates in the standard transmission polariscope, Trans. ASME Appl. Mech. Sect., Vol. 64, p. A-161.
229. Dumont, C., 1939, Stress concentration around an open circular hole in a plate subjected to bending normal to the plane of the plate, NACA Tech. Note 740, National Advisory Committee on Aeronautics, Washington, DC.
230. Durelli, A.J., and Kobayashi, A.S., 1958, Stress distribution around hydrostatically loaded circular holes in the neighborhood of corners, Trans. ASME Appl. Mech. Sect., Vol. 80, p. 178.
231. Durelli, A.J., and Riley, W.F., 1965, Introduction to Photomechanics, Prentice-Hall, Englewood Cliffs, NJ, p. 233.
232. Durelli, A.J., del Rio, C.J., Parks, V.J., and Feng, H., 1967, Stresses in a pressurized cylinder with a hole, Proc. ASCE, Vol. 93, p. 383.
233. Durelli, A.J., Parks, V.J., and Uribe, S., 1968, Optimization of a slot
234. Durelli, A.J., Parks, V.J., Chandrashekhara, K., and Norgard, J.S., 1971, Stresses in a pressurized ribbed cylindrical shell with a reinforced circular hole interrupting a rib, Trans. ASME J. Eng. Ind., Vol. 93, p. 897.
235. Edwards, R.H., 1951, Stress concentrations around spheroidal inclusions and cavities, Trans. ASME Appl. Mech. Sect., Vol. 75, p. 19.
236. Ellyin, F., 1970a, Experimental study of oblique circular cylindrical apertures in plates, Exp. Mech., Vol. 10, p. 195.
237. Ellyin, F., 1970b, Elastic stresses near a skewed hole in a flat plate and applications to oblique nozzle attachments in shells, WRC Bull. 153, Welding Research Council, New York, p. 32.
238. Ellyin, F., and Izmiroglu, U.M., 1973, Effect of corner shape on elastic stress and strain concentration in plates with an oblique hole, Trans. ASME J. Eng. Ind., Vol. 95, p. 151.
239. Eringen, A.C., Naghdi, A.K., and Thiel, C.C., 1965, State of stress in a circular cylindrical shell with a circular hole, WRC Bull. 102, Welding Research Council, New York.
240. ESDU, 1965, 1970, 1981, 1985, 1989, Stress Concentrations, Engineering Science Data Unit, London.
241. Feddersen, C.E., 1966, Discussion of plain strain crack toughness testing, ASTM Spec. Tech. Publ. 410, American Society for Testing and Materials, Philadelphia, PA, p. 77.
242. Fessler, H., and Roberts, E.A., 1961, Bending stresses in a shaft with a transverse hole, in Selected Papers on Stress Analysis, Stress Analysis Conference, Delft, The Netherlands, 1959, Reinhold Publishing, New York, p. 45.
243. Fessler, H., and Thorpe, T.E., 1967a, Optimization of stress concentrations at holes in rotating discs, J. Strain Anal., Vol. 2, p. 152.
244. Fessler, H., and Thorpe, T.E., 1967b, Reinforcement of non-central holes in rotating discs, J. Strain Anal., Vol. 2, p. 317.
245. Folias, E.S., and Wang, J.J., 1990, On the three dimensional stress field around a circular hole in a plate of arbitrary thickness, Comp. Mech., Vol. 6, p. 376.
246. Fourney, M.E., and Parmerter, R.R., 1961, Stress concentrations for internally perforated star grains, NAVWEPS Rep. 7758, Bureau of Naval Weapons.
247. Fourney, M.E., and Parmerter, R.R., 1963, Photoelastic design data for pressure stresses in slotted rocket grains, J. AIAA, Vol. 1, p. 697.
248. Fourney, M.E., and Parmerter, R.R., 1966, Parametric study of rocket grain configurations by photoelastic analysis, AFSC Rep. AFRPL-TR-66-52.
249. Frocht, M.M., and Hill, H.N., 1940, Stress concentration factors around a central circular hole in a plate loaded through a pin in the hole, Trans. ASME Appl. Mech. Sect., Vol. 62, p. A-5.
250. Frocht, M.M., and Leven, M.M., 1951, Factors of stress concentration for slotted bars in tension and bending, Trans. ASME Appl. Mech. Sect., Vol. 73, p. 107.
251. Gassner, E., and Horstmann, K.F., 1961, The effect of ground to air to ground cycle on the life of transport aircraft wings which are subject to gust loads, RAE Transl. 933.
252. Gerdeen, J.C., 1972, Analysis of stress concentration in thick cylinders with sideholes and crossholes, Trans. ASME J. Eng. Ind., Vol. 94, Ser. B, p. 815.
253. Gerdeen, J.C., and Smith, R.E., 1972, Experimental determination of stress concentration factors in thick-walled cylinders with crossholes and sideholes, Exp. Mech., Vol. 12, p. 530.
254. Godfrey, D. E.R., 1959, Theoretical Elasticity and Plasticity for Engineers, Thames & Hudson, London, p, 109.
255. Goldberg, J.E., and Jabbour, K.N., 1965, Stresses and displacements in perforated plates, Nucl. Struct. Eng., Vol. 2, p. 360.
256. Goodier, J.N., 1933, Concentration of stress around spherical and cylindrical inclusions and flaws, Trans. ASME Appl. Mech. Sect., Vol. 55, p. A-39.
257. Goodier, J.N., 1936, Influence of circular and elliptical holes on transverse flexure of elastic plates, Phil. Mag., Vol. 22, p. 69.
258. Goodier, J.N., and Lee, G.H., 1941, An extension of the photoelastic method of stress measurement to plates in transverse bending, Trans. ASME Appl. Mech. Sect., Vol. 63, p. A-27.
259. Green, W.A., Hooper, G. T.J., and Hetherington, R., 1964, Stress distributions in rotating discs with non-central holes, Aeronaut. Q., Vol. 15, p. 107.
260. Grigolyuk, E.I., and Fil'shtinskii, L.A., 1970, Perforirorannye Plastiny i Obolocki (Perforated Plates and Shells), Nauka Publishing House, Moscow.
261. Gurney, C., 1938, An analysis of the stresses in a flat plate with reinforced circular hole under edge forces, ARC R&M 1834, Aeronautical Research Council, London.
262. Haddon, R. A.W., 1967, Stresses in an infinite plate with two unequal circular holes, Q. J. Mech. Appl. Math., Vol. 20, pp. 277-291.
263. Hamada,M., Yokoya, K., Hamamoto,M., andMasuda, T., 1972, Stress concentration of a cylindrical shell with one or two circular holes, Bull. Jpn. Soc. Mech. Eng., Vol. 15, p. 907.
264. Hanzawa, H., Kishida,M., Murai, M., and Takashina, K., 1972, Stresses in a circular cylindrical shell having two circular cutouts, Bull. Jpn. Soc. Mech. Eng., Vol. 15, p. 787.
265. Hardenberg,D.E., and Zamrik, S.Y., 1964, Effects of external loadings on large outlets in a cylindrical pressure vessel, WRC Bull. 96, Welding Research Council, New York.
266. Heller, S.R., 1969, Stress concentration factors for a rectangular opening with rounded comers in a biaxially loaded plate, J. Ship Res., Vol. 13, p. 178.
267. Heller, S.R., Brock, J.S., and Bart, R., 1958, The stresses around a rectangular opening with rounded corners in a uniformly loaded plate, Proc. 3rd U.S. Natl. Congr. Appl. Mech., American Society of Mechanical Engineers, Philadelphia, PA, p. 357.
268. Hennig, A., 1933, Polarisationsoptische Spannungsuntersuchungen am gelochten Zugstab und am Nietloch, Forsch. Gebiete Ing., VDI, Vol. 4, p. 53.
269. Hetényi, M., 1939a, The application of hardening resins in three-dimensional photoelastic studies, J. Appl. Phys., Vol. 10, p. 295.
270. Hetényi, M., 1939b, Some applications of photoelasticity in turbine-generator design, Trans. ASME Appl. Mech. Sect., Vol. 61, p. A-151.
271. Heywood, R.B., 1952, Designing by Photoelasticity, Chapman & Hall, London.
272. Hicks, R., 1957, Reinforced elliptical holes in stressed plates, J. R. Aeronaut. Soc., Vol. 61, p. 688.
273. Hirano, F., 1950, Study of shape coefficients of two-dimensional elastic bodies, Trans. Jpn. Soc. Mech. Eng., Vol. 16, No. 55, p. 52 (in Japanese).
274. Hooke, C.J., 1968, Numerical solution of plane elastostatic problems by point matching, J. Strain Anal., Vol. 3, p. 109.
275. Horger, O.J., and Buckwalter, T.V., 1940, Photoelasticity as applied to design problems, Iron Age, Vol. 145, Pt. II, No. 21, p. 42.
276. Horvay, G., 1952, The plane-stress problem of perforated plates, Trans. ASME Appl. Mech. Sect., Vol. 74, p. 355.
277. Houghton, D.S., and Rothwell, A., 1961, The analysis of reinforced circular and elliptical cutouts under various loading conditions, Rep. 151, College of Aeronautics, Cranfield, England.
278. Houghton, D.S., and Rothwell A., 1962, The effect of curvature on the stress concentration around holes in shells, Rep. 156, College of Aeronautics, Cranfield, England.
279. Howland, R. C.J., 1929-1930, On the stresses in the neighborhood of a circular hole in a strip under tension, Philos. Trans. R. Soc. (London) Ser. A, Vol. 229, p. 67.
280. Howland, R. C.J., 1935, Stresses in a plate containing an infinite row of holes, Proc. R. Soc. (London) Ser. A, Vol. 148, p. 471.
281. Howland, R. C.J., and Stevenson, A.C., 1933, Biharmonic analysis in a perforated strip, Philos. Trans. R. Soc. A (London) Ser. A, Vol. 232, p. 155.
282. Hulbert, L.E., 1965, The numerical solution of two-dimensional problems of the theory of elasticity, Eng. Exp. Stn. Bull. 198, Ohio State University, Columbus, OH.
283. Hulbert, L.E., and Niedenfuhr, F.W., 1965, Accurate calculation of stress distributions in multiholed plates, Trans. ASME Ind. Sect., Vol. 87, p. 331.
284. Hütter, A., 1942, Die Spannungsspitzen in gelochten Blechscheiben und Streifen, Z. Angew. Math. Mech., Vol. 22, p. 322.
285. Inglis, C.E., 1913, Stresses in a plate due to the presence of cracks and sharp corners, Engineering (London), Vol. 95, p. 415.
286. Irwin, G.R., 1958, Fracture, in Encyclopedia of Physics, Vol. 6, Springer-Verlag, Berlin.
287. Irwin, G.R., 1960, Fracture mechanics, in Structural Mechanics, Pergamon Press, Elmsford, NY.
288. Isida, M., 1952, On the bending of an infinite strip with an eccentric circular hole, Proc. 2nd Jpn. Congr. Appl. Mech., p. 57.
289. Isida, M., 1953, Form factors of a strip with an elliptic hole in tension and bending, Sci. Pap. Faculty Engr. Tokushima Univ., Vol. 4, p. 70.
290. Isida, M., 1955a, On the tension of a semi-infinite plate with an elliptic hole, Sci. Pap. Faculty of Engr. Tokushima Univ., Vol. 5, p. 75 (in Japanese).
291. Isida, M., 1955b, On the tension of a strip with a central elliptic hole, Trans. Jpn. Soc. Mech. Eng., Vol. 21, p. 514.
292. Isida, M., 1960, On the tension of an infinite strip containing a square hole with rounded corners, Bull. Jpn. Soc. Mech. Eng., Vol. 3, p. 254.
293. Isida, M., 1965, Crack tip intensity factors for the tension of an eccentrically cracked strip, report, Department of Mechanics, Lehigh University, Bethlehem, PA.
294. Isida, M., 1966, Stress intensity factors for the tension of an eccentrically cracked strip, Trans. ASME Appl. Mech. Sect., Vol. 88, p. 674.
295. Jenkins, W.C., 1968, Comparison of pressure and temperature stress concentration factors for solid propellant grains, Exp. Mech., Vol. 8, p. 94.
296. Jessop, H.T., Snell, C., and Holister, G.S., 1958, Photoelastic investigation of plates with single interference-fit pins with load applied (a) to pin only and (b) to pin and plate simultaneously, Aeronaut. Q., Vol. 9, p. 147.
297. Jessop, H.T., Snell, C., and Allison, I.M., 1959, The stress concentration factors in cylindrical tubes with transverse cylindrical holes, Aeronaut. Q., Vol. 10, p. 326.
298. Jones, N., and Hozos, D., 1971, A study of the stress around elliptical holes in flat plates, Trans. ASME J. Eng. Ind., Vol. 93, p. 688.
299. Joseph, J.A., and Brock, J.S., 1950, The stresses around a small opening in a beam subjected to pure bending, Trans. ASME Appl. Mech. Sect., Vol. 72, p. 353.
300. Kaufman, A., Bizon, P.T., and Morgan, W.C., 1962, Investigation of circular reinforcements of rectangular cross-section around central holes in flat sheets under biaxial loads in the elastic range, NASA TN D-1195, National Aeronautics and Space Administration, Washington, DC.
301. Kelly, L.G., 1967, Handbook of Numerical Methods and Applications, Addison-Wesley, Reading, MA.
302. Knight, R.C., 1935, Action of a rivet in a plate of finite breadth, Philos. Mag., Ser. 7, Vol. 19, p. 517.
303. Koiter,W.T., 1957, An elementary solution of two stress concentration problems in the neighborhood of a hole, Q. Appl. Math., Vol. 15, p. 303.
304. Koiter,W.T., 1965, Note on the stress intensity factors for sheet strips with crack under tensile loads, report, Laboratory of Engineering Mechanics, Technological University, Delft, The Netherlands.
305. Kolosoff, G., 1910, Dissertation, St. Petersburg, Russia.
306. Kraus, H., 1962, Pressure in multibore bodies, Int. J. Mech. Sci., Vol. 4, p. 187.
307. Kraus, H., 1963, Stress concentration factors for perforated annular bodies loaded in their plane, unpublished report, Pratt and Whitney Co., East Hartford, CT.
308. Kraus, H., Rotondo, P., Haddon,W.D., 1966, Analysis of radially deformed perforated flanges, Trans. ASME Appl. Mech. Sect., Vol. 88, p. 172.
309. Lapsley C., and Mackensie, D., 1997, Residual stress at radial cross-bores, in Pressure Vessel Technology, Vol. 344, High Pressure Technology, American Society of Mechanical Engineers, p. 51.
310. Leckie, F.A., Paine, D.J., and Penny, R.K., 1967, Elliptical discontinuities in spherical shells, J. Strain Anal., Vol. 2, p. 34.
311. Leist, K., and Weber, J., 1956, Optical stress distributions in rotating discs with eccentric holes, Rep. 57, Institute for Jet Propulsion, German Research Institute for Aeronautics, Aachen, Germany.
312. Lekkerkerker, J.G., 1964, Stress concentration around circular holes in cylindrical shells, Proc. 11th International Congress on Applied Mechanics, Springer-Verlag, Berlin, p. 283.
313. Leven, M.M., 1938, 1952, unpublished data obtained at Carnegie Institute of Technology and Westinghouse Research Laboratories.
314. Leven, M.M., 1955, Quantitative three-dimensional photoelasticity, Proc. SESA, Vol. 12, p. 157.
315. Leven, M.M., 1963, Effective elastic constants in plane stressed perforated plates of low ligament efficiency, Res. Rep. 63-917-520-R1, Westinghouse Research Laboratories, Pittsburgh, PA.
316. Leven, M.M., 1964, Stress distribution in a perforated plate of 10% ligament efficiency subjected to equal biaxial stress, Res. Rep. 64-917-520-R1, Westinghouse Research Laboratories, Pittsburgh, PA.
317. Leven, M.M., 1966, Photoelastic determination of the stresses in reinforced openings in pressure vessels, WRC Bull. 113, Welding Research Council, New York, p. 25.
318. Leven, M.M., 1967, Photoelastic analysis of a plate perforated with a square pattern of penetrations, Res. Memo. 67-1D7-TAADS-MI, Westinghouse Research Laboratories, Pittsburgh, PA.
319. Leven, M.M., 1970, Photoelastic determination of the stresses at oblique openings in plates and shells, WRC Bull. 153, Welding Research Council, New York, p. 52.
320. Levy, S., McPherson, A.E., and Smith, F.C., 1948, Reinforcement of a small circular hole in a plane sheet under tension, Trans. ASME Appl. Mech. Sect., Vol. 70, p. 160.
321. Lind, N.C., 1968, Stress concentration of holes in pressurized cylindrical shells, AIAA J., Vol. 6, p. 1397.
322. Ling, C.-B., 1948a, On the stresses in a plate containing two circular holes, J. Appl. Phys., Vol. 19, p. 77.
323. Ling, C.-B., 1948b, The stresses in a plate containing an overlapped circular hole, J. Appl. Phys., Vol. 19, p. 405.
324. Ling, C.-B., 1952, Torsion of a circular cylinder having a spherical cavity, Q. Appl. Math., Vol. 10, p. 149.
325. Ling, C.-B., 1959, Stresses in a stretched slab having a spherical cavity, Trans. ASME Appl. Mech. Sect., Vol. 81, p. 235.
326. Ling, C.-B., 1956, Stresses in a circular cylinder having a spherical cavity under tension, Q. Appl. Math, Vol. 13, p. 381.
327. Ling, C.-B., 1967, On stress concentration at semi-circular notch, Trans. ASME Appl. Mech. Sect., Vol. 89, p. 522.
328. Lingaiah, K., North, W. P.T., and Mantle, J.B., 1966, Photoelastic analysis of an asymmetrically reinforced circular cutout in a flat plate subjected to uniform unidirectional stress, Proc. SESA, Vol. 23, No. 2, p. 617.
329. Mansfield, E.H., 1953, Neutral holes in plane sheet-reinforced holes which are elastically equivalent to the uncut sheet, Q. J. Mech. Appl. Math., Vol. 6, p. 370.
330. Mansfield, E.H., 1955, Stress considerations in the design of pressurized shells, ARC CP 217, Aeronautical Research Council, London.
331. Mansfield, E.H., 1970, Analysis of a class of variable thickness reinforcement around a circular hole in a flat sheet, Aeronaut. Q., Vol. 21, p. 303.
332. McKenzie, H.W., and White, D.J., 1968, Stress concentration caused by an oblique round hole in a flat plate under uniaxial tension, J. Strain Anal., Vol. 3, p. 98.
333. Meijers, P., 1967, Doubly-periodic stress distributions in perforated plates, Dissertation, Technische Hochschule, Delft, The Netherlands.
334. Mindlin, R.D., 1939, Stress distribution around a tunnel, Proc. ASCE, Vol. 65, p. 619.
335. Mindlin, R.D., 1948, Stress distribution around a hole near the edge of a plate in tension, Proc. SESA, Vol. 5, pp. 56-68.
336. Mitchell, L.H., 1966, Stress concentration factors at a doubly-symmetric hole, Aeronaut. Q., Vol. 17, p. 177.
337. Mitchell, W.D., and Rosenthal, D., 1949, Influence of elastic constants on the partition of load between rivets, Proc. SESA, Vol. 7, No. 2, p. 17.
338. Miyamoto, H., 1957, On the problem of the theory of elasticity for a region containing more than two spherical cavities, Trans. Jpn. Soc. Mech. Eng., Vol. 23, p. 437.
339. Miyao, K., 1970, Stresses in a plate containing a circular hole with a notch, Bull. Jpn. Soc. Mech. Eng., Vol. 13, p. 483.
340. Mondina, A., and Falco, H., 1972, Experimental stress analysis on models of PWR internals, Dis. Macch. Palermo, Vol. 3, p. 77.
341. Mori, A., 1972, Stress distributions in a semi-infinite plate with a row of circular holes, Bull. Jpn. Soc. Mech. Eng., Vol. 15, p. 899.
342. Murthy, M. V.V., 1969, Stresses around an elliptic hole in a cylindrical shell, Trans. ASME Appl. Mech. Sect., Vol. 91, p. 39.
343. Murthy, M. V.V., and Rao, M. N.B., 1970, Stresses in a cylindrical shell weakened by an elliptic hole with major perpendicular to shell axis, Trans. ASME Appl. Mech. Sect., Vol. 92, p. 539.
344. Neuber, H., 1958, Kerbspannungslehre, 2nd ed., Springer-Verlag, Berlin; translation, 1961, Theory of Notch Stresses, Office of Technical Services, U.S. Department of Commerce,Washington, DC.
345. Nisida, M., 1952, Rep. Sci. Res. Inst. Jpn., Vol. 28, p. 30.
346. Nishida, M., 1976, Stress Concentration, Morikita Shuppan, Tokyo (in Japanese).
347. Nisitani, H., 1968, Method of approximate calculation for interference of notch effect and its application, Bull. Jpn. Soc. Mech. Eng., Vol. 11, p. 725.
348. North, W.E., 1965, A photoelastic study of the interaction effect of two neighboring holes in a plate under tension, M.S. thesis, University of Pittsburgh, Pittsburgh, PA.
349. Nuno, H., Fujie, T., and Ohkuma, K., 1964, Experimental study on the elastic properties of perforated plates with circular holes in square patterns, MAPI Lab. Res. Rep. 74, Mitsubishi Atomic Power Industries Laboratory, Ohmiya, Japan.
350. O'Donnell,W.J., 1966, A study of perforated plates with square penetration patterns,WAPD-T-1957, Bettis Atomic Power Laboratory, Pittsburgh, PA.
351. O'Donnell, W.J., 1967, A study of perforated plates with square penetration patterns, WRC Bull. 124, Welding Research Council, New York.
352. O'Donnell, W.J., and Langer, B.P., 1962, Design of perforated plates, Trans. ASME Ind. Sect., Vol. 84, p. 307.
353. Paloto, J.C., Santos, R.D., and Domínguez, P., 2003, Stress concentration factors for a circular hole in curved beams under bending loads, Strain, Vol. 39, p. 27.
354. Papirno, R., 1962, Stress concentrations in tensile strips with central notches of varying end radii, J. R. Aeronaut. Soc., Vol. 66, p. 323.
355. Paris, P.C., and Sih, G.C., 1965, Stress analysis of cracks, ASTM Spec. Tech. Publ., American Society for Testing and Materials, Philadelphia, PA, p. 34.
356. Peterson, R.E., 1965, The interaction effect of neighboring holes or cavities, with particular reference to pressure vessels and rocket cases, Trans. ASME Basic Eng. Sect., Vol. 87, p. 879.
357. Peterson, R.E., 1968, Stress concentration factors for a round bar with a transverse hole, Rep. 68-1D7-TAEUGR8, Westinghouse Research Laboratories, Pittsburgh, PA.
358. Peterson, R.E., 1974, Stress Concentration Factors, Wiley, New York.
359. Pierce, D.N., and Chou, S.I., 1973, Stress state around an elliptic hole in a circular cylindrical shell subjected to axial loads, presented at the SESA Meeting, Los Angeles, CA.
360. Pilkey, W.D., 2005, Formulas for Stress, Strain, and Structural Matrices, 2nd ed., Wiley, Hoboken, NJ.
361. Reissner, E., 1945, The effect of transverse shear deformation on the bending of elastic plates, Trans. ASME Appl. Mech. Sect., Vol. 67, p. A-69.
362. Reissner, H., and Morduchow, M., 1949, Reinforced circular cutouts in plane sheets, NACA TN 1852, National Advisory Committee on Aeronautics, Washington, DC.
363. Riley, W.F., 1964, Stresses at tunnel intersections, Proc. ASCE J. Eng. Mech. Div., Vol. 90, p. 167.
364. Riley, W.F., Durelli, A.J., and Theocaris, P.S., 1959, Further stress studies on a square plate with a pressurized central circular hole, Proc. 4th Annual Conference on Solid Mechanics, University of Texas, Austin, TX.
365. Robinson, E.L., 1944, Bursting tests of steam-turbine disk wheels, Trans. ASME Appl. Mech. Sect., Vol. 66, p. 380.
366. Rooke, D.P., 1970, Width corrections in fracture mechanics, Eng. Fracture Mech., Vol. 1, pp. 727-728.
367. Ryan, J.J., and Fischer, L.J., 1938, Photoelastic analysis of stress concentration for beams in pure bending with central hole, J. Franklin Inst., Vol. 225, p. 513.
368. Sadowsky, M.A., and Sternberg, E., 1947, Stress concentration around an ellipsoidal cavity in an infinite body under arbitrary plane stress perpendicular to the axis of revolution of cavity, Trans. ASME Appl. Mech. Sect., Vol. 69, p. A-191.
369. Salerno, V.L., and Mahoney, J.B., 1968, Stress solution for an infinite plate containing two arbitrary circular holes under equal biaxial stresses, Trans. ASME Ind. Sect., Vol. 90, p. 656.
370. Sampson, R.C., 1960, Photoelastic analysis of stresses in perforated material subject to tension or bending, Bettis Tech. Rev. WAP-BT-18, Bettis Atomic Power Laboratory, Pittsburgh, PA.
371. Savin, G.N., 1961, Stress Concentration Around Holes, Pergamon Press, Elmsford, NY.
372. Schaechterle, K., 1934, On the fatique strength of riveted and welded joints and the design of dynamically stressed structural members based on conclusions drawn from fatigue tests, Int. Assoc. Bridge Struct. Eng., Vol. 2, p. 312.
373. Schulz, K.J., 1941, Over den Spannungstoestand in doorborde Platen (On the state of stress in perforated plates), doctoral dissertation, Technische Hochschule, Delft, The Netherlands.
374. Schulz, K.J., 1942-1945, On the state of stress in perforated strips and plates, Proc. Koninkïyke Nederlandsche Akadamie vanWetenschappen (Netherlands Royal Academy of Science), Amsterdam, Vol. 45 (1942), p. 233, 341, 457, 524; Vol. 46-48 (1943-1945), p. 282, 292. These papers were summarized by C. B. Biezeno, Survey of papers on elasticity published in Holland, 1940-1946, Adv. Appl. Mech., Vol. 1, Academic Press, New York (1948), p. 105. Biezeno comments, "The calculations are performed only for a strip with one row of holes, though an extensive program of further investigation was projected, which unfortunately could not be executed; the Jewish author, who lived in Holland, was arrested and marched off to Germany or Poland, which meant his destruction.".
375. Schutz,W., 1964, Fatigue test specimens, Tech. Note TM 10/64, Laboratorium für Betriebsfestigkeit, Darmstadt, Germany.
376. Seika, M., 1958, The stresses in a thick cylinder having a square hole under concentrated loading, Trans. ASME Appl. Mech. Sect., Vol. 80, p. 571.
377. Seika, M., and Amano, A., 1967, The maximum stress in a wide plate with a reinforced circular hole under uniaxial tension: effects of a boss with fillet, Trans. ASME Appl. Mech. Sect., Vol. 89, p. 232.
378. Seika, M., and Ishii, M., 1964, Photoelastic investigation of the maximum stress in a plate with a reinforced circular hole under uniaxial tension, Trans. ASME Appl. Mech. Sect., Vol. 86, p. 701.
379. Seika, M., Isogimi, K., and Inoue, K., 1971, Photoelastic study of stresses in a cylindrical pressure vessel with a nozzle, Bull. Jpn. Soc. Mech. Eng., Vol. 14, p. 1036.
380. Sekiya, T., 1955, An approximate solution in the problems of elastic plates with an arbitrary external form and a circular hole, Proc. 5th Jpn. Natl. Congr. Appl. Mech., p. 95.
381. Shioya, S., 1963, The effect of an infinite row of semi-circular notches on the transverse flexure of a semi-infinite plate, Ing. Arch., Vol. 32, p. 143.
382. Shioya, S., 1971, On the tension of an infinite thin plate containing a pair of circular inclusions, Bull. Jpn. Soc. Mech. Eng., Vol. 14, p. 117.
383. Shivakumar,K.N., andNewman, J.C., 1992, Stress concentrations for straight-shank and countersunk holes in plates subjected to tension, bending, and pin loading, NASA Tech. Rep. 3192, National Aeronautics and Space Administration, Washington, DC.
384. Shivakumar, K.N., and Newman, J.C., 1995, Stress concentration equations for straight-shank and countersunk holes in plates, Trans. ASME Appl. Mech. Sect., Vol. 62, p. 248.
385. Shivakumar, K.N., Bhargava, A., and Hamoush, S., 2006, An equation for stress concentration factors in countersunk holes, Comp. Mater. Continua, Vol. 3, p. 97.
386. Sjôstrôm, S., 1950, On the stresses at the edge of an eccentically located circular hole in a strip under tension, Rep. 36, Aeronautical Research Institute, Stockholm, Sweden.
387. Slot, T., 1972, Stress Analysis of Thick Perforated Plates, Technomic Publishing, Westport, CT.
388. Sobey, A.J., 1963, Stress concentration factors for rounded rectangular holes in infinite sheets, ARC R&M 3407, H.M. Stationery Office, London.
389. Sobey, A.J., 1968, Stress concentration factors for reinforced rounded-square holes in sheets, ARC R&M 3546, H.M. Stationery Office, London.
390. Sternberg, E., and Sadowsky, M.A., 1949, Three-dimensional solution for the stress concentration around a circular hole in a plate of arbitrary thickness, Trans. ASME Appl. Mech. Sect., Vol. 71, p. 27.
391. Sternberg, E., and Sadowsky, M.A., 1952, On the axisymmetric problem of the theory of elasticity for an infinite region containing two spherical cavities, Trans. ASME Appl. Mech. Sect., Vol. 76, p. 19.
392. Tamate, O., 1957, Einfluss einer unendichen Reihe gleicher Kreislôcher auf die Durchbiegung einer dünnen Platte, Z. Angew. Math. Mech., Vol. 37, p. 431.
393. Tamate, O., 1958, Transverse flexure of a thin plate containing two holes, Trans. ASME Appl. Mech. Sect., Vol. 80, p. 1.
394. Tan, S.C., 1994, Stress Concentration in Laminated Composites, Technomic Publishing, Lancaster, PA.
395. Templin, R.L., 1954, Fatigue of aluminum, Proc. ASTM, Vol. 54, p. 641.
396. Theocaris, P.S., 1956, The stress distribution in a strip loaded in tension by means of a central pin, Trans. ASME Appl. Mech. Sect., Vol. 78, p. 482.
397. Thum,A., andKirmser,W., 1943, ÜberlagerteWechselbeanspruchungen, ihre Erzeugung und ihr Einfluss auf die Dauerbarkeit und Spannungsausbildung quergebohrter Wellen, VDI-Forschungsheft 419, Vol. 14(b), p. 1.
398. Timoshenko, S., 1922, On the distribution of stresses in a circular ring compressed by two forces along a diameter, Philos. Mag., Vol. 44, p. 1014.
399. Timoshenko, S., 1924, On stresses in a plate with a circular hole, J. Franklin Inst., Vol. 197, p. 505.
400. Timoshenko, S., 1956, Strength of Materials, Pt. II, 3rd ed., Van Nostrand, Princeton, NJ, p. 208.
401. Timoshenko, S., and Goodier, J.N., 1970, Theory of Elasticity, 3rd ed., McGraw-Hill, New York, p. 398.
402. Tingleff, O., 1971, Stress concentration in a cylindrical shell with an elliptical cutout, AIAA J., Vol. 9, p. 2289.
403. Troyani, N., Gomes, C., and Sterlacci, G., 2002, Theoretical stress concentration factors for short rectangular plates with centered circular holes, Trans. ASME J. Mech. Des., Vol. 124, p. 126.
404. Troyani, N., Jaimes, N., Sterlacci, G., and Gomes, C., 2005, Stress concentration effects in short cylindrical vessels with holes subjected to tension: a complete account, J. Pressure Vessel Technol., Vol. 127, p. 184.
405. Udoguti, T., 1947, Solutions of some plane elasticity problems by using dipole coordinates: Part I, Trans. Jpn. Soc. Mech. Eng., Vol. 13, p. 17 (in Japanese).
406. Van Dyke, P., 1965, Stresses about a circular hole in a cylindrical shell, AIAA J., Vol. 3, p. 1733.
407. Wahl, A.W., and Beeuwkes, R., 1934, Stress concentration produced by holes and notches, Trans. ASME Appl. Mech. Sect., Vol. 56, p. 617.
408. Wells, A.A., 1950, On the plane stress distribution in an infinite plate with rim-stiffened elliptical opening, Q. J. Mech. Appl. Math., Vol. 2, p. 23.
409. Westergaard, H.M., 1939, Bearing pressure and cracks, Trans. ASME Appl. Mech. Sect., Vol. 61, p. A-49.
410. Whaley, R.E., 1965, Stress concentration factors for countersunk holes, Exp. Mech., Vol. 5, p. 257.
411. Wilson, H.B., 1961, Stresses owing to internal pressure in solid propellant rocket grains, J. ARS, Vol. 31, p. 309.
412. Wittrick,W.H., 1959a, The stress around reinforced elliptical holes in plane sheet, Rep. ARL SM267, Aeronautics Research Laboratory, Australia.
413. Wittrick, W.H., 1959b, Stress around reinforced elliptical holes, with applications to pressure cabin windows, Aeronaut. Q., Vol. 10, p. 373-400.
414. Wittrick,W.H., 1963, Stress concentrations for uniformly reinforced equilateral triangular holes with rounded comers, Aeronaut. Q., Vol. 14, p. 254.
415. WRC, 1966, WRC Bull. 113, Welding Research Council.
416. WRC, 1970, WRC Bull. 113, Welding Research Council.
417. Wu, H.C., and Mu, B., 2003, On stress concentrations for isotropic/orthotropic plates and cylinders with a circular hole, Composites Pt. B, Vol. 34, p.127.
418. Yamamoto, K., and Terada, S., 2000, Stress concentrations factors for cross bores in KHK standard, Rep. HPI-ASME-004, High Pressure Institute of Japan.
419. Young, J.B., and Lee, K.K., 1993, Stress concentration factors in countersunk holes, Aeronaut. J., Vol. 97, p. 267.
420. Youngdahl, C.K., and Sternberg, E., 1966, Three-dimensional stress concentration around a cylindrical hole in a semi-infinite elastic body, Trans. ASME Appl. Mech. Sect., Vol. 88, p. 855.
421. Yu, Y.Y., 1952, Gravitational stresses on deep tunnels, Trans. ASME Appl. Mech. Sect., Vol. 74, p. 537.
422. Adelfio, B., and DiBenedetto, F., 1970, Forzamento su Appoggio Discontinue (Shrink-Fitted Ring over Discontinous Support), Dis. Macch., Palermo, Vol. 3, p. 21.
423. Aida, T., and Terauchi, Y., 1962, On the bending stress in a spur gear, Bull. Jpn. Soc. Mech. Eng., Vol. 5, p. 161.
424. Ancker, C.J., and Goodier, J.N., 1958, Pitch and curvature corrections for helical springs, Trans. ASME Appl. Mech. Sect., Vol. 80, pp. 466, 471, 484.
425. ANSI, 1967, Keys and keyseats, U.S. Standard ANSI B17.1, American Society of Mechanical Engineers, New York; reaffirmed 1973 and 1987.
426. Arai, J., 1965, The bending stress concentration factor of a solid crankshaft, Bull. Jpn. Soc. Mech. Eng., Vol. 8, p. 322.
427. ASME, 1971, Boiler and Pressure Vessel Code: Pressure Vessels, Section VIII, American Society of Mechanical Engineers, New York, pp. 18, 27.
428. AAR, 1950, Passenger car axle tests, 4th Prog. Rep.,Association of American Railroads,Washington, DC, p. 26.
429. ASTM, 1952, Symposium on fretting corrosion, STP 144,American Society for Testing and Materials, Philadelphia, PA.
430. Baud, R.V., and Peterson, R.E., 1929, Load and stress cycles in gear teeth, Mech. Eng., Vol. 51, p. 653.
431. Baumeister, T., Ed., 1967, Marks' Standard Handbook for Mechanical Engineers, McGraw-Hill, New York, pp. 8, 20, 21, 133.
432. Brown, A. F.C., and Hickson, V.M., 1952-1953, A photoelastic study of stresses in screw threads, Proc. IME, Vol. 1B, p. 605; discussion, p. 608.
433. Candee, A.H., 1941, Geometrical Determination of Tooth Factor, American Gear Manufacturers Association, Pittsburgh, PA.
434. Case, J., 1925, Strength of Materials, Longmans, Green, London, p. 291.
435. Choo, Y.S., van der Vegte, G.J., Zettlemoyer, N., Li, B.H., and Liew, J. Y.R., 2005, Static strength of T-joints reinforced with doubler or collar plates: I, Experimental investigations, J. Struct. Eng., Vol. 131, p. 119.
436. Cox, H.L., and Brown, A. F.C., 1964, Stresses around pins in holes, Aeronaut. Q., Vol. XV, Pt. 4, pp. 357-372.
437. Coyle, M.B., and Watson, S.J., 1963-1964, Fatigue strength of turbine shafts with shrunk-on discs, Proc. Inst. Mech. Eng. (London), Vol. 178, p. 147.
438. DeGregorio, G., 1968, Ricerca sul Forzamento delle Corone Dentate (Research on shrunk-on gear rings), Tech. Ital. Triesta, Vol. 33, p. 1.
439. Dijkstra, O.D., Puthli, R.S., and Snijder, H.H., 1988, Stress concentration factors in T and K-T tubular joints using finite element analysis, J. Energy Resour. Technol., Vol. 110, p. 246.
440. Dolan, T.J., and Broghamer, E.L., 1942, A photoelastic study of stresses in gear tooth fillets, Univ. Illinois Exp. Stn. Bull. 335.
441. Durelli, A.J., and Riley, W.F., 1965, Introduction to Photomechanics, Prentice-Hall, Englewood Cliffs, NJ, p. 220.
442. Efthymiou, M., and Durkin, S., 1985, Stress concentrations in T/Y and gap overlap K-joints, in Behaviour of Offshore Structures, Elsevier, Amsterdam, The Netherlands, p. 429.
443. ESDU, 1981, Stress Concentrations, Engineering Sciences Data Unit, London.
444. Fessler, H., and Stanley, P., 1965, Stresses in torispherical drumheads: a photoelastic investigation, J. Strain Anal., Vol. l, p. 69.
445. Fessler, H., and Stanley, P., 1966, Stresses in torispherical drumheads: a critical evaluation, J. Strain Anal., Vol. l, p. 89.
446. Fessler, H., Rogers, C.C., and Stanley, P., 1969a, Stresses at end-milled keyways in plain shafts subjected to tension, bending and torsion, J. Strain Anal., Vol. 4, p. 180.
447. Fessler, H., Rogers, C.C., and Stanley, P., 1969b, Stresses at keyway ends near shoulders, J. Strain Anal., Vol. 4, p. 267.
448. Frocht, M.M., and Hill, H.N., 1940, Stress-concentration factors around a central circular hole in a plate loaded through pin in the hole, Trans. ASME Appl. Mech. Sect., Vol. 62, pp. A5-A9.
449. Fung, T.C., Soh, C.K., Chan, T.K., and Erni, 2002, Stress concentration factors of doubler plate reinforced tubular T joints, J. Struct. Eng., Vol. 128, p. 1399.
450. Gho, W.M., Fung, T.C., and Soh, C.K., 2003, Stress and strain concentration factors of completely overlapped tubular K(N) joints, J. Struct. Eng., Vol. 129, p. 21.
451. Gibson, W.H., and Gilet, P.M., 1938, Transmission of torque by keys and keyways, J. Inst. Eng. Austr., Vol. 10, p. 393.
452. Gôhner, O., 1932, Die Berechnung Zylindrischer Schraubenfedern, Z. Ver. Dtsch. Ing., Vol. 76, p. 269.
453. Gregory, R.D., 1968, Stress concentration around a loaded bolt in an axially loaded bar, Proc. Camb. Philos. Soc., No. 64, pp. 1215-1326.
454. Griffith, G.I., and Taylor, A.A., 1917-1918, Use of soap films in solving torsion problems, Tech. Rep. Br. Adv. Comm. Aeronaut., Vol. 3, p. 910.
455. Hetényi, M., 1939a, The application of hardening resins in three-dimensional photoelastic studies, J. Appl. Phys., Vol. 10, p. 295.
456. Hetényi, M., 1939b, Some applications of photoelasticity in turbine-generator design, Trans. ASME Appl. Mech. Sect., Vol. 61, p. A-151.
457. Hetényi, M., 1943, The distribution of stress in threaded connections, Proc. Soc. Exp. Stress Anal., Vol. 1, No. 1, p. 147.
458. Heywood, R.B., 1969, Photoelasticity for Designers, Pergamon Press, Elmsford, NY, p. 326.
459. Horger,O.J., 1953, Press fitted assembly, in ASME Metals EngineeringHandbook: Design,McGraw-Hill, New York, p. 178.
460. Horger, O.J., 1956, Fatigue of large shafts by fretting corrosion, Proc. International Conference on Fatigue, Institute of Mechanical Engineers, London, p. 352.
461. Horger, O.J., and Buckwalter, T.V., 1940, Photoelasticity as applied to
462. Horger, O.J., and Maulbetsch, J.L., 1936, Increasing the fatigue strength of press-fitted axle assemblies by rolling, Trans. ASME Appl. Mech. Sect., Vol. 58, p. A-91.
463. Huth, J.H., 1950, Torsional stress concentration in angle and square tube fillets, Trans. ASME Appl. Mech. Sect., Vol. 72, p. 388.
464. Jacobson, M.A., 1955, Bending stresses in spur gear teeth: proposed new design factors based on a photoelastic investigation, Proc. Inst. Mech. Eng., Vol. 169, p. 587.
465. Kaufmann, F., and Jäniche, W., 1940, Beitrag zur Dauerhaltbarkeit von Schraubenverbindungen, Tech. Mitt. Krupp Forschungsber., Vol. 3, p. 147.
466. Kuang, J.G., Potvin, A.B., and Leick, R.D., 1975, Stress concentrations in tubular joints, Proc. Offshore Technological Conference 0TC2205, Houston, TX, p. 593.
467. Lee, M. M.K., and Bownes, D., 2002, Fatigue life prediction of offshore tubular joints using fracture mechanics, Fatigue Fract. Eng. Mater. Struct., Vol. 25, p. 1025.
468. Leven, M.M., 1949, Stresses in keyways by photoelastic methods and comparison with numerical solution, Proc. Soc. Exp. Stress Anal., Vol. 7, No. 2, p. 141.
469. Liesecke, G., 1933, Berechnung Zylindrischer Schraubenfedern mit Rechteckigem Drahtquerschnitt, Z. VDI, Vol. 77, pp. 425, 892.
470. Lyse, I., and Johnston, B.G., 1935, Structural beams in torsion, Lehigh Univ. Pub., Vol. 9, p. 477.
471. Mantle, J.B., and Dolan, T.J., 1948, A photoelastic study of stresses in U-shaped members, Proc. Soc. Exp. Stress Anal., Vol. 6, No. 1, p. 66.
472. Marino, R, L., and Riley, W.F., 1964, Optimizing thread-root contours using photoelastic methods, Exp. Mech., Vol. 4, p. 1.
473. Martinaglia, L., 1942, Schraubenverbindungen, Schweiz. Bauztg., Vol. 119, p. 107.
474. Meek, R. M.G., 1967, Effect of pin bending on the stress distribution in thick plates loaded through pins, NEL Rep. 311.
475. Michalec, G.W., 1966, Precision Gearing: Theory and Practice, Wiley, New York, p. 466.
476. Morgan,M.R., and Lee, M. M. K, 1998, Parametric equations for distributions of stress concentration factors in tubular K-joints under out-of-plane moment loading, Int. J. Fatigue, Vol. 20, p. 449.
477. Nishioka, K., and Komatsu, H., 1967, Researches on increasing the fatigue strength of press-fitted shaft assembly, Bull. Jpn. Soc. Mech. Eng., Vol. 10, p. 880.
478. Nishioka, K., Nishimura, S., and Hirakawa, K., 1968, Fundamental investigations of fretting fatigue, Bull. Jpn. Soc. Mech. Eng., Vol. 11, p. 437; 1969, Vol. 12, pp. 180, 397, 408.
479. Nisida, M., 1963, New photoelastic methods for torsion problems, in Symposium on Photoelasticity, M. M. Frocht, Ed., Pergamon Press, Elmsford, NY, p. 109.
480. Okubo, H., 1950a, On the torsion of a shaft with keyways, Q. J. Mech. Appl. Math., Vol. 3, p. 162.
481. Okubo, H., 1950b, Torsion of a circular shaft with a number of longitudinal notches, Trans. ASME, Appl. Mech. Sect., Vol. 72, p. 359.
482. Okubo, H., Hosono, K., and Sakaki, K., 1968, The stress concentration in keyways when torque is transmitted through keys, Exp. Mech., Vol. 8, p. 375.
483. Peterson, R.E., 1930, Load and deflection cycles in gear teeth, Proc. 3rd International Applications of Mechanics Congress, Stockholm, Sweden, p. 382.
484. Peterson, R.E., 1932, Fatigue of shafts having keyways, Proc. ASTM, Vol. 32, Pt. 2, p. 413.
485. Peterson, R.E., 1938, Methods of correlating data from fatigue tests of stress concentration specimens, Stephen Timoshenko Anniversary Volume, Macmillan, New York, p. 179.
486. Peterson, R.E., 1950, Interpretation of service fractures, in Handbook of Experimental Stress Analysis, M. Hetényi, Ed., Wiley, New York, pp. 603, 608, 613.
487. Peterson, R.E., 1953, Stress Concentration Design Factors, Wiley, New York.
488. Peterson, R.E., andWahl, A.M., 1935, Fatigue of shafts at fittedmembers, with a related photoelastic analysis, Trans. ASME Appl. Mech. Sect., Vol. 57, p. A-l.
489. Pilkey, W.D., 2005, Formulas for Stress, Strain, and Structural Matrices, 2nd ed.,Wiley, New York.
490. Richart, F.E., Olson, T.A., and Dolan, T.J., 1938, Tests of reinforced concrete knee frames and bakelite models, Univ. Ill. Exp. Stn. Bull. 307.
491. Riggs, N.C., and Frocht, M.M., 1938, Strength of Materials, Ronald Press, New York, p. 389.
492. Romeijn, A., and Wardenier, J. 1994, Stress and strain concentration factors of welded tubular joints caused by chord loading, Proc. 6th International Symposium on Tubular Structures, Melbourne, Australia, p. 643.
493. Romeijn, A., Puthli, R.S., and Wardenier, J., 1993, Guidelines on the numerical determination of stress concentration factors of tubular joints, Proc. 5th International Symposium on Tubular Structures, Nottingham, England, p. 625.
494. Smedley, P., and Fisher, P. 1991, Stress concentration factors for simple tubular joints, Proc. 1st International Offshore and Polar Engineering Conference, Edinburgh, Scotland, p. 475.
495. Solakian, A.G., and Karelitz, G.B., 1932, Photoelastic studies of shearing stresses in keys and keyways, Trans. ASME Appl. Mech. Sect., Vol. 54, p. 97.
496. Staedel,W., 1933, Dauerfestigkeit von Schrauben, Mitt. Materialprüfungsanst. Tech.Hochsch.Darmstadt, No. 4, VDI Verlag, Berlin.
497. Theocaris, P.S., 1956, The stress distribution in a strip loaded in tension by means of a central pin, Trans. ASME, Vol. 78, pp. 85-90.
498. Thum, A., and Bruder, E., 1938, Dauerbruchgefahr an Hohlkehlen von Wellen und Achsen und ihre Minderung, Deutsche Kraftfahrtforsch. Auftrag Reichs-Verkehrsministeriums, No. 11, VDI Verlag, Berlin.
499. Thum, A., and Wunderlich, F., 1933, Der Einfluss von Einspannund Kantandgriffsstellen auf die Dauerhaltbarkeit der Konstruktionen, Z. VDI, Vol. 77, p. 851.
500. Timoshenko, S., and Goodier, J.N., 1970, Theory of Elasticity, 3rd Ed., McGraw Hill, New York, p. 398.
501. Tomlinson, G.A., 1927, The rusting of steel surface on contact, Proc. R. Soc. (London) A, Vol. 115, p. 472.
502. Tomlinson, G.A., Thorpe, P.L., and Gough, H.J., 1939, An investigation of the fretting corrosion of closely fitting surfaces, Proc. Inst. Mech. Eng. (London), Vol. 141, p. 223.
503. Van der Vegte, G.J., Choo, Y.S., Liang, J.X., Zettlemoyer, N., and Liew, J. Y.R., 2005, Static strength of T-joints reinforced with doubler or collar plates: Part II, Numerical simulations, J. Struct. Eng., Vol. 131, p.129.
504. Wahl, A.M., 1946, Calculation of stresses in crane hooks, Trans. ASME Appl. Mech. Sect., Vol. 68, p. A-239.
505. Wahl, A.M., 1963, Mechanical Springs, 2nd ed., McGraw-Hill, New York.
506. Weibel, E.E., 1934, Studies in photoelastic stress determination, Trans. ASME Appl. Mech. Sect., Vol. 56, p. 637.
507. White, D.J., and Humpherson, J., 1969, Finite-element analysis of stresses in shafts due to interference-fit hubs, J. Strain Anal., Vol. 4, p. 105.
508. Whitehead, R.S., Abbey, A.J., and Glen-Bott, M.G., 1978, Analytical determination of stress intensity factors for attachment lugs, Rep. SON(P) 199, British Aerospace, Aircraft Group,Warton Division, Warton, England.
509. Wiegand, H., 1933, Über dieDauerfestigkeit von Schraubenwerkstoffen und Schraubenverbindungen, Thesis, Technische Hochshule Darmstadt; Also published as No. 14 (1934), Wissenschaftliche Verôffentlichungen der Firma, Bauer & Schaurte A.G., Neuss, Germany.
510. Wilson, B.J., and Quereau, J.F., 1928, A simple method of determining stress in curved flexural members, Univ. Ill. Exp. Stn. Circ. 16.
511. Wordsworth, A.C., 1981. Stress concentration factors at K and KT tubular joints, Proc. Fatigue in Offshore Structure Steels, London, 56.
512. Wordsworth A.C., and Smedley, G.C., 1978, Stress concentration at unstiffened tubular joints, IX/P31-(1-7), European Offshore Steels Research Seminar, Cambridge, England.
513. Yoshitake, H., 1962, Photoelastic stress analysis of the spline shaft, Bull. Jpn. Soc. Mech. Eng., Vol. 5, p. 195.
514. Young, W.C., and Budynas, R.G., 2002, Roark's Formulas for Stress and Strain, 7th ed.,McGraw-Hill, New York.
515. Adelmann, H.M., and Haftka, R.T., 1986, Sensitivity analysis of discrete structural systems, AIAA J., Vol. 24, pp. 823-832.
516. Altair, 1996, OptiStruct User's Manual, v2.0, 1996, Altair Engineering, Troy, MI.
517. Altair, 2006a, Altair HyperMesh User's Manual, v8.0, Altair Engineering, Troy, MI.
518. Altair, 2006b, Altair Optistruct User's Manual, v8.0, Altair Engineering, Troy, MI.
519. ANSYS, 2005, ANSYS User's Manual, v10.0, Swanson Ansys, Canonsburg, PA.
520. Arora, J.S., 1995, Structural design sensitivity analysis: continuum and discrete approaches, in J. Herskovits, Ed., Advances in Structural Optimization, Kluwer Academic Publishers, Dordrecht, The Netherlands, pp. 47-70.
521. Babuška, I., Zienkiewicz, O.C., Gago, J., and Oliveira, E. R. de A., Eds., 1986, Accuracy Estimates and Adaptive Refinements in Finite Element Computations, Wiley, New York.
522. Barthelemy, B., and Haftka, R.T., 1990, Accuracy analysis of the semi-analytical method for shape sensitivity calculation, Mech. Struct. Mach., Vol. 18, pp. 407-432.
523. Barthelemy, J.-F.M., and Haftka, R.T., 1993, Approximation concepts for optimum structural design: a review, Struct. Optim., Vol. 5, pp. 129-144.
524. Bathe, K.-J., 1995, Finite Element Procedures, Prentice Hall, Upper Saddle River, NJ.
525. Braibant, V., and Fleury, C., 1984, Shape optimal design using B-splines, Comput. Methods Appl. Mech. Eng., Vol. 44, pp. 247-267.
526. Braibant, V., and Fleury, C., 1985, An approximation concepts approach to shape optimal design, Comput. Methods Appl. Mech. Eng., Vol. 53, pp. 119-148.
527. Broyden, C.G., 1970, The convergence of a class of double-rank minimization algorithms: 2, The new algorithm, J. Inst. Math. Appl., Vol. 6, pp. 222-231.
528. Chang, K.-H., and Choi, K.K., 1992, A geometry-based parameterization method for shape design of elastic solids, Mech. Struct. Mach., Vol. 20, pp. 215-252.
529. Choi, K.K., and Chang, K.-H., 1994, A study of design velocity field computation for shape optimal design, Finite Elements Anal. Des., Vol. 15, pp. 317-342.
530. Farin, G., 1992, Curves and Surfaces for Computer Aided Geometric Design: A Practical Guide, 3rd ed., Academic Press, San Diego, CA.
531. Fletcher, R., 1970, A new approach to variable metric algorithms, Comput. J., Vol. 13, pp. 317-322.
532. Fleury, C., 1989, Efficient approximation concepts using second order information, Int. J. Numer. Methods Eng., Vol. 28, pp. 2041-2058.
533. Gallagher, R.H., and Zienkiewicz, O.C., Eds., 1973, Optimum Structural Design,Wiley, New York.
534. Goldfarb,D., 1970, Afamily of variable metric methods derived by variationalmeans, Math. Comput., Vol. 24, pp. 23-26.
535. Gordon, W.J., 1971, Blending-function methods of bivariate and multivariate interpolation and approximation, SIAM J. Numer. Anal., Vol. 8, pp. 158-177.
536. Haftka, R.T., and Adelmann, H.M., 1989, Recent developments in structural sensitivity analysis, Struct. Optim., Vol. 1, pp. 137-152.
537. Haftka, R.T., and Grandhi, R.V., 1986, Structural shape optimization: a survey, Comput. Methods Appl. Mech. Eng., Vol. 57, pp. 91-106.
538. Haftka, R.T., Gürdal, Z., and Kamat, M.P., 1990, Elements of Structural Optimization, Kluwer Academic Publishers, Dordrecht, The Netherlands.
539. Haug, E.J., Choi, K.K., and Komkov, V., 1986, Design Sensitivity Analysis of Structural Systems, Academic Press, Orlando, FL.
540. Herskovits, J., Ed., 1995, Advances in Structural Optimization, Kluwer Academic Publishers, Dordrecht, The Netherlands.
541. Kamat, M.P., Ed., 1993, Structural Optimization: Status and Promise, AIAA Series in Aeronautics and Astronautics, Vol. 150, American Institute for Aeronautics and Astronautics, Washington, DC.
542. Kuhn, H.W., and Tucker, A.W., 1951, Nonlinear programming, Proc. 2nd Berkeley Symposium on Mathematical Statistics and Probability, University of California Press, Berkeley, CA.
543. Mackerle, J., 1995, Linear and nonlinear dynamic finite element analysis codes, in W. Pilkey and B. Pilkey, Eds., 1995, Shock and Vibrations Computer Programs, Saviac, Washington, DC, pp. 455-495.
544. Morris, A.J., Ed., 1982, Foundations of Structural Optimization: A Unified Approach, Wiley, New York.
545. MSC, 2005a, MSC Nastran User's Manual, MSC Software Corporation, Santa Ana, CA.
546. MSC, 2005b, Patran User Documentation, MSC Software Corporation, Santa Ana, CA.
547. Papalambros, P.Y., and Wilde, D.J., 1988, Principles of Optimal Design, Cambridge University Press, Cambridge, UK.
548. Pilkey,W., and Pilkey, B., Eds., 1995, Shock and Vibrations Computer Programs, Saviac,Washington, DC.
549. Pilkey, W.D., and Wunderlich, W., 1993, Mechanics of Structures: Variational and Computational Methods, CRC Press, Boca Raton, FL.
550. Rogers,D.F., andAdams, J.A., 1976, Mathematical Elements for Computer Graphics,McGraw-Hill, New York.
551. Schramm, U., and Pilkey, W.D., 1993, The coupling of geometric descriptions and finite elements using NURBs: a study in shape optimization, Finite Elements Anal. Des., Vol. 15, pp. 11-34.
552. Shanno, D.F., 1970, Conditioning of quasi-Newton methods for function minimization, Math. Comput., Vol. 24, pp. 647-656.
553. Simulia, 2006, Abaqus Analysis User's Manual, v6.7, Simulia, Providence, RI.
554. Starnes, J.H., and Haftka, R.T., 1979, Preliminary design of composite wings for buckling, strength and displacement constraints, J. Aircraft, Vol. 16, pp. 564-570.
555. Storaasli, O.O., and Sobieszczanski-Sobieski, J., 1974, On the accuracy of the Taylor approximation for structure resizing, AIAA J., Vol. 12, pp. 231-233.
556. Svanberg, K., 1987, The method of moving asymptotes: a new method for structural optimization, Int. J. Numer. Methods Eng., Vol. 24, pp. 359-373.
557. Szabo, B.A., and Babuška, I., 1991, Finite Element Analysis, Wiley, New York.
558. Timoshenko, S.P., and Goodier, J.N., 1951, Theory of Elasticity, McGraw-Hill, New York.
559. Vanderplaats, 2006, Genesis User's Manual, v9.0, Vanderplaats Research & Development Inc., Colorado Springs, CO.
560. VMA, 1993, DOT User's Manual, v4.00, VMA Engineering, Colorado Springs, CO.
561. Yao, T.M., and Choi, K.K., 1989, 3-D shape optimal design and automatic finite element regridding, Int. J. Numer. Methods Eng., Vol. 28, pp. 369-384.
562. Zienkiewicz, O.C., and Campbell, J.S., 1973, Shape optimization and sequential linear programming, in R. H. Gallagher and O. C. Zienkiewicz, Eds., Optimum Structural Design, Wiley, New York.
563. Zienkiewicz, O.C., and Taylor, R.L., 2005, The Finite Element Method for Solid and Structural Mechanics, 6th ed., Elsevier Science and Technology, Oxford.
564. Zienkiewicz, O.C., and Zhu, J.Z., 1987, A simple error estimation and adaptive procedure for practical engineering analysis, Int. J. Numer. Methods Eng., Vol. 24, pp. 337-357.
565. Zienkiewicz, O.C., and Zhu, J.Z., 1992, The superconvergence recovery technique and a-posteriori error estimators, Int. J. Numer. Methods Eng., Vol. 33, pp. 1331-1364.
566. Zhu, J. Z, and Zienkiewicz, O.C., 1990, Superconvergence patch recovery and a-posteriori error estimates: Part 1, The recovery technique, Int. J. Numer. Methods Eng., Vol. 30, pp. 1321-1339.