Experimentation, Validation, and Uncertainty Analysis for Engineers: Third Edition

Experimentation, Validation, and Uncertainty Analysis for Engineers: Third Edition

Volumn , Issue , 2009, Pages 1-317

  Coleman, Hugh W ^a   Steele, W Glenn ^b  

^a UNIVERSITY OF ALABAMA IN HUNTSVILLE   (United States)

^b MISSISSIPPI STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84890261268     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470485682     Document Type: Book

References (107)

1. Webster's New Twentieth Century Dictionary, 2nd ed., Simon & Schuster, New York, 1979.
2. Shortley, G., and Williams, D., Elements of Physics, 4th ed., Prentice-Hall, Upper Saddle River, NJ, 1965.
3. Schenck, H., Theories of Engineering Experimentation, 3rd ed., McGraw-Hill, New York, 1979.
4. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993. Corrected and reprinted, 1995.
5. American National Standards Institute/American Society of Mechanical Engineers (ASME), Test Uncertainty, PTC-19.1-2005, ASME, New York, 2006.
6. Abernethy, R. B., Benedict, R. P., and Dowdell, R. B., "ASME Measurement Uncertainty," Journal of Fluids Engineering, Vol. 107, June 1985, pp. 161-164.
7. Moffat, R. J., "Contributions to the Theory of Single-Sample Uncertainty Analysis," Journal of Fluids Engineering, Vol. 104, June 1982, pp. 250-260.
8. Moffat, R. J., "Using Uncertainty Analysis in the Planning of an Experiment," Journal of Fluids Engineering, Vol. 107, June 1985, pp. 173-178.
9. Moffat, R. J., "Describing the Uncertainties in Experimental Results," Experimental Thermal and Fluid Science, Vol. 1, Jan. 1988, pp. 3-17.
10. Nikuradse, J. "Stromugsgestze in Rauhen Rohren," VDI Forschungsheft, No. 361 1950 (English Translation, NACA TM 1292).
11. White, F. M., Fluid Mechanics, 6th ed., McGraw-Hill, New York, 2008.
12. Joint Committee for Guides in Metrology (JCGM), "Evaluation of Measurement Data-Supplement 1 to the 'Guide to the Expression of Uncertainty in Measurement'-Propagation of Distributions Using a Monte Carlo Method," JCGM 101: 2008, France, 2008.
13. American Society of Mechanical Engineers (ASME), Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer, V&V20-2009, ASME, New York, 2009.
14. American Institute of Aeronautics and Astronautics (AIAA), Guide for the Verification and Validation of Computational Fluid Dynamics Simulations, AIAA G-077-1998, AIAA, New York.
15. American Society of Mechanical Engineers (ASME), Guide for Verification and Validation in Computational Solid Mechanics, ASME V&V10-2006, ASME, New York, 2006.
16. NASA, "Standard for Models and Simulations," NASA-STD-7009, Draft, 2008.
17. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993.
18. Bowker, A. H., and Lieberman, G. J., Engineering Statistics, Prentice-Hall, Upper Saddle River, NJ, 1959.
19. Montgomery, D. C., and Runger, G. C., Applied Statistics and Probability for Engineers, 4th ed., Wiley, New York, 2007.
20. Hahn, G., "Understanding Statistical Intervals," Industrial Engineering, Dec. 1970, pp. 45-48.
21. Coleman, H. W., and Steele, W. G., "Engineering Application of Experimental Uncertainty Analysis," AIAA Journal, Vol. 33, No. 10, 1995, pp. 1888-1896.
22. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993.
23. Steele, W. G., Ferguson, R. A., Taylor, R. P., and Coleman, H. W., "Computer-Assisted Uncertainty Analysis," Computer Applications in Engineering Education, Vol. 5, No. 3, 1997, pp. 169-179.
24. Hosni, M. H., Coleman, H. W., and Steele, W. G., "Application of MathCad Software in Performing Uncertainty Analysis Calculations to Facilitate Laboratory Instruction," Computers in Education Journal, Vol. 7, No. 4, Oct.-Dec. 1997, pp. 1-9.
25. Newman III, J. C., Whitfield, D. L., and Anderson, W. K., "Step-Size Independent Approach for Multidisciplinary Sensitivity Analysis," Journal of Aircraft, Vol. 40, No. 3, May-June, 2003, pp. 566-573.
26. Joint Committee for Guides in Metrology (JCGM), "Evaluation of Measurement Data-Supplement 1 to the 'Guide to the Expression of Uncertainty in Measurement'-Propagation of Distributions Using a Monte Carlo Method," JCGM 101:2008, France, 2008.
27. McKay, M. D., Conover, W. J., and Beckman, R. J., "A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer Code," Technometrics, Vol. 21, 1979, pp. 239-245.
28. Helton, J. C., and Davis, F. J., "Latin Hypercube Sampling and the Propagation of Uncertainty in Analyses of Complex Systems," Reliability Engineering and System Safety, Vol. 81, 2003, pp. 23-69.
29. Helton, J. C., and Davis, F. J., "Sampling Based Methods," in Saltelli, A., Chan, K., and Scott, E. M., Eds., Sensitivity Analysis, Wiley, New York, 2000, pp. 101-153.
30. Iman, R. L., and Shortencarier, M. J., "A FORTRAN 77 Program and User's Guide for the Generation of Latin Hypercube and Random Samples for Use with Computer Models," Technical Report SAND83-2356, Sandia National Laboratories, Albuquerque, NM, Mar. 1984.
31. Wyss, G. D., and Jorgensen, K. H., "A User's Guide to LHS: Sandia's Latin Hypercube Sampling Software," Technical Report SAND98-0210, Sandia National Laboratories, Albuquerque, NM, Feb. 1998.
32. Shortley, G., and Williams, D., Elements of Physics, 4th ed., Prentice-Hall, Upper Saddle River, NJ, 1965.
33. Hodkinson, J. R., "The Optical Measurement of Aerosols," in Davies, C. N., Ed., Aerosol Science, Academic Press, San Diego, CA, 1966, pp. 287-357.
34. Ariessohn, P. C., Eustis, R. H., and Self, S. A., "Measurements of the Size and Concentration of Ash Droplets in Coal-Fired MHD Plasmas," in Proceedings of the 7th International Conference on MHD Electrical Power Generation, Vol. II, 1980, pp. 807-814.
35. Holve, D., and Self, S. A., "Optical Measurements of Mean Particle Size in Coal-Fired MHD Flows," Combustion and Flame, Vol. 37, 1980, pp. 211-214.
36. Moffat, R. J., "Using Uncertainty Analysis in the Planning of an Experiment," Journal of Fluids Engineering, Vol. 107, 1985, pp. 173-178.
37. Incropera, F. P., and Dewitt, D. P., Fundamentals of Heat Transfer, Wiley, New York, 1981.
38. Hudson, S. T., and Coleman, H. W., "A Preliminary Assessment ofMethods for Determining Turbine Efficiency," AIAA Paper 96-0101, American Institute of Aeronautics and Astronautics, New York, 1996.
39. Markopolous, P., Coleman, H. W., and Hawk, C. W., "Uncertainty Assessment of Performance Evaluation Methods for Solar Thermal Absorber/Thruster Testing," Journal of Propulsion and Power, Vol. 13, No. 4, 1997, pp. 552-559.
40. Boyack, B. E., et al., "Quantifying Reactor Safety Margins Part 1: An Overview of the Code Scaling, Applicability, and Uncertainty Evaluation Methodology," Nuclear Science and Design, Vol. 119, No. 1, 1990, pp. 1-16.
41. Wilson, G. E., et al., "Quantifying Reactor Safety Margins Part 2: Characterization of Important Contributions to Uncertainty," Nuclear Science and Design, Vol. 119, No. 1, 1990, pp. 17-32.
42. Wuff,W., et al., "Quantifying Reactor Safety Margins Part 3: Assessment and Ranging of Parameters," Nuclear Science and Design, Vol. 119, No. 1, 1990, pp. 33-65.
43. Taylor, R. P., Hodge, B. K., and Steele, W. G., "Series Piping System Design Program with Uncertainty Analysis," Heating/Piping/Air Conditioning, Vol. 65, No. 5, May 1993, pp. 87-93.
44. Taylor, R. P., Luck, R., Hodge, B. K., and Steele, W. G., "Uncertainty Analysis of Diffuse-Gray Radiation Enclosure Problems," Journal of Thermophysics and Heat Transfer, Vol. 9, No. 1, 1995, pp. 63-69.
45. Hudson, S. T., Bordelon, W. J., and Coleman, H. W., "Effect of Correlated Precision Errors on the Uncertainty of a Subsonic Venturi Calibration," AIAA Journal, Vol. 34, No. 9, Sept. 1996, pp. 1862-1867.
46. Coleman, H. W., and Lineberry, D. L., "Proper Estimation of Random Uncertainties in Steady State Testing," AIAA Journal, Vol. 44, No. 3, 2006, pp. 629-633.
47. Moffat, R. J., "Describing the Uncertainties in Experimental Results," Experimental Thermal and Fluid Science, Vol. 1, Jan. 1998, pp. 3-17.
48. U.S. National Bureau of Standards (NBS), Tables of Thermal Properties of Gases, NBS Circular 564, NBS, Washington, DC, 1955.
49. Brown, K. K., Coleman, H. W., Steele, W. G., and Taylor, R. P., "Evaluation of Correlated Bias Approximations in Experimental Uncertainty Analysis," AIAA Journal, Vol. 34, No. 5, May 1996, pp. 1013-1018.
50. American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), Fundamentals, ASHRAE Handbook, ASHRAE, Atlanta, GA, 1997.
51. Coleman, H. W., Steele, W. G., and Taylor, R. P., "Implications of Correlated Bias Uncertainties in Single and Comparative Tests," Journal of Fluids Engineering, Vol. 117, Dec. 1995, pp. 552-556.
52. Chakroun, W., Taylor, R. P., Steele, W. G., and Coleman, H. W., "Bias Error Reduction Using Ratios to Baseline Experiments-Heat Transfer Case Study," Journal of Thermophysics and Heat Transfer, Vol. 7, No. 4, Oct.-Dec. 1993, pp. 754-757.
53. Coleman, H. W., Hosni, M. H., Taylor, R. P., and Brown, G. B., "Using Uncertainty Analysis in the Debugging and Qualification of a Turbulent Heat Transfer Test Facility," Experimental Thermal and Fluid Science, Vol. 4, 1991, pp. 673-683.
54. Reynolds, W. C., Kays, W. M., and Kline, S. J., Heat Transfer in the Turbulent Incompressible Boundary Layer, Parts I, II, and III, NASA memos 12-1-58W, 12-2-58W, and 12-3-58W, 1958.
55. Kays, W. M., and Crawford, M. E., Convective Heat and Mass Transfer, McGraw-Hill, New York, 1980.
56. Schenck, H., Theories of Engineering Experimentation, 3rd ed., McGraw-Hill, New York, 1979.
57. Hicks, C. R., Fundamental Concepts in the Design of Experiments, 3rd ed., Holt, Rinehart & Winston, New York, 1982.
58. Montgomery, D. C., Design and Analysis of Experiments, 4th ed., Wiley, New York, 1997.
59. Deaconu, S., and Coleman, H. W., "Limitations of Statistical Design of Experiments Approaches in Engineering Testing," Journal of Fluids Engineering, Vol. 122, No. 2, 2000, pp. 254-259.
60. Moffat, R. J., "Contributions to the Theory of Single-Sample Uncertainty Analysis," Journal of Fluids Engineering, Vol. 104, June 1982, pp. 250-260.
61. Moffat, R. J., "Using Uncertainty Analysis in the Planning of an Experiment," Journal of Fluids Engineering, Vol. 107, June 1985, pp. 173-178.
62. Moffat, R. J., "Describing the Uncertainties in Experimental Results," Experimental Thermal and Fluid Science, Vol. 1, Jan. 1988, pp. 3-17.
63. American Society of Mechanical Engineers (ASME), Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer, V&V20-2009, ASME, New York, 2009.
64. Coleman, H. W., and Stern, F., "Uncertainties and CFD Code Validation," Journal of Fluids Engineering, Vol. 119, Dec. 1997, pp. 795-803. (Also "Discussion and Authors' Closure," Vol. 120, Sept. 1998, pp. 635-636.)
65. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement (corrected and reprinted 1995), ISO Geneva, 1993.
66. American Society for Mechanical Engineers (ASME), "Test Uncertainty", ASME PTC 19. 1-2005, ASME, New York, 2006.
67. American Institute of Aeronautics and Astronautics (AIAA), Guide for Verification and Validation of Computational Fluid Dynamics Simulations, AIAA G-077-1998, AIAA, New York, 1998.
68. American Society for Mechanical Engineers (ASME), Guide for Verification and Validation in Computational Solid Mechanics, ASME V&V 10-2006, ASME, New York, 2006.
69. Nikuradse, J., "Stromugsgestze in Rauhen Rohren," VDI Forschungsheft, No. 361, 1950 (English Translation, NACA TM 1292).
70. Roache, P. J., Verification and Validation in Computational Science and Engineering, Hermosa Publishers, Albuquerque, NM, 1998.
71. Richardson, L. F., "The Approximate Arithmetical Solution by Finite Differences of Physical Problems Involving Differential Equations, with an Application to the Stresses in a Masonry Dam," Transactions of the Royal Society of London, Ser. A, Vol. 210, 1910, pp. 307-357.
72. Eça, L., and Hoekstra, M., "An Evaluation of Verification Procedures for CFD Applications," paper presented at the 24th Symposium on Naval Hydrodynamics, Fukuoka, Japan, July 8-13, 2002.
73. Beck, J. V., Blackwell, B. F., and St. Clair, C. R., Inverse Heat Conduction, Wiley, New York, 1985.
74. Brown, K. K., "Assessment of the Experimental Uncertainty Associated with Regressions," Ph.D. dissertation, University of Alabama in Huntsville, Huntsville, AL, 1996.
75. Brown, K. K., Coleman, H. W., and Steele, W. G., "A Methodology for Determining the Experimental Uncertainty in Regressions," Journal of Fluids Engineering, Vol. 120, No. 3, 1998, pp. 445-456.
76. Schenck, H., Theories of Engineering Experimentation, 3rd ed., McGraw-Hill, New York, 1979.
77. Montgomery, D. C., and Peck, E. A., Introduction to Linear Regression Analysis, 2nd ed., Wiley, New York, 1992.
78. American National Standards Institute/American Society of Mechanical Engineers (ASME), Test Uncertainty, PTC 19.1-2005, ASME, New York, 2006.
79. Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T., Numerical Recipes: The Art of Scientific Computing, Cambridge University Press, Cambridge, 1986.
80. Bean, H. S. (Ed.), Fluid Meters: Their Theory and Application, 6th ed., American Society of Mechanical Engineers, New York, 1971.
81. Coleman, H. W., and Steele, W. G., "Engineering Application of Uncertainty Analysis," AIAA Journal, Vol. 33, No. 10, Oct. 1995, pp. 1888-1896.
82. Hildebrand, F. B., Advanced Calculus for Applications, Prentice-Hall, Upper Saddle River, NJ, 1962.
83. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993. Corrected and reprinted, 1995.
84. Coleman, H. W., and Steele, W. G., "Some Considerations in the Propagation of Systematic and Random Errors into an Experimental Result," Experimental Uncertainty in Fluid Measurements, ASME FED Vol. 58, ASME, New York, 1987, pp. 57-62.
85. Abernethy, R. B., Benedict, R. P., and Dowdell, R. B., "ASME Measurement Uncertainty," Journal of Fluids Engineering, Vol. 107, 1985, pp. 161-164.
86. American National Standards Institute/American Society of Mechanical Engineers (ASME), Measurement Uncertainty, PTC 19.1-1985 Part 1, ASME, New York, 1986.
87. American National Standards Institute/American Society of Mechanical Engineers (ASME), Measurement Uncertainty for Fluid Flow in Closed Conduits, MFC-2M-1983, ASME, New York, 1984.
88. Kline, S. J., and McClintock, F. A., "Describing Uncertainties in Single-Sample Experiments," Mechanical Engineering, Vol. 75, 1953, pp. 3-8.
89. Steele, W. G., Taylor, R. P., Burrell, R. E., and Coleman, H. W., "Use of Previous Experience to Estimate Precision Uncertainty of Small Sample Experiments," AIAA Journal, Vol. 31, No. 10, 1993, pp. 1891-1896.
90. Coleman, H. W., Hosni, M. H., Taylor, R. P., and Brown, G. B., "Using Uncertainty Analysis in the Debugging and Qualification of a Turbulent Heat Transfer Test Facility," Experimental Thermal and Fluid Science, Vol. 4, No. 6, 1991, pp. 673-683.
91. American Institute of Aeronautics and Astronautics (AIAA), Assessment of Wind Tunnel Data Uncertainty, AIAA Standard S-071-1995, AIAA, New York, 1995.
92. Advisory Group for Aerospace Research and Development (AGARD), Quality Assessment for Wind Tunnel Testing, AGARD-AR-304, AGARD, Brussels, 1994.
93. American National Standards Institute/American Society of Mechanical Engineers (ASME), Test Uncertainty, PTC 19.1-2005, ASME, New York, 2005 (second revision of Ref. 6).
94. Taylor, B. N., and Kuyatt, C. E., "Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results," NIST Technical Note 1297, National Institute of Standards and Technology, Gaithersburg, MD, Sept. 1994, p. 5.
95. International Organization for Standardization (ISO), Guide to the Expression of Uncertainty in Measurement, ISO, Geneva, 1993.
96. Steele, W. G., Ferguson, R. A., Taylor, R. P., and Coleman, H. W., "Comparison of ANSI/ASME and ISO Models for Calculation of Uncertainty," ISA Transactions, Vol. 33, 1994, pp. 339-352.
97. Steele, W. G., Taylor, R. P., Burrell, R. E., and Coleman, H. W., "Use of Previous Experience to Estimate Precision Uncertainty of Small Sample Experiments," AIAA Journal, Vol. 31, No. 10, Oct. 1993, pp. 1891-1896.
98. Joint Committee for Guides in Metrology (JCGM), "Evaluation of Measurement Data-Supplement 1 to the 'Guide to the Expression of Uncertainty in Measurement'-Propagation of Distributions Using a Monte Carlo Method," JCGM 101:2008, France, 2008.
99. Moffat, R. J., "Describing the Uncertainties in Experimental Results," Experimental Thermal and Fluid Science, Vol. 1, Jan. 1988, pp. 3-17.
100. Steele, W. G., Maciejewski, P. K., James, C. A., Taylor, R. P., and Coleman, H. W., "Asymmetric Systematic Uncertainties in the Determination of Experimental Uncertainty," AIAA Journal, Vol. 34, No. 7, July 1996, pp. 1458-1463.
101. Obert, E. F., Internal Combustion Engines and Air Pollution, Harper & Row, New York, 1973.
102. Omega Engineering, Complete Temperature Measurement Handbook and Encyclopedia, Omega Engineering, Stamford, CT, 1987, p. T37.
103. Incropera, F. P., and Dewitt, D. P., Fundamentals of Heat Transfer, Wiley, New York, 1981.
104. Hottel, H. C., and Sarofim, A. F., Radiative Transfer, McGraw-Hill, New York, 1967.
105. Schenck, H., Theories of Engineering Experimentation, 3rd ed., McGraw-Hill, New York, 1979.
106. Holman, J. P., Experimental Methods for Engineers, 4th ed., McGraw-Hill, New York, 1984.
107. Doebelin, E. O., Measurement Systems Application and Design, 3rd ed., McGraw-Hill, New York, 1983.