Environmental control of drilling fluids and produced water

Environmental Technology in the Oil Industry

Volumn , Issue , 2008, Pages 77-121

  Wojtanowicz, A K ^a  

^a LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889991683     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4020-5472-3_4     Document Type: Chapter

References (131)

1. Ayers, R.C., Sauer, T.C., and Anderson, P.W. (1985) The generic mud concept for NPDES permitting of offshore drilling discharges. Journal of Petroleum Technology, March, 475
2. Dunn, H.E. and Beardmore, D.H. (1989) Status report: Gulf of Mexico, mud toxicity limitations. Petroleum Engineer International, October
3. Clark, R.K. (1994) Impact of environmental regulations on drilling-fluid technology. Journal of Petroleum Technology, September, 804-9
4. Jones, R.D. et al. (1983) The development and performance of a nontoxic oil mud. Drilling, April
5. Clark, R.K. et al. (1976) Polyacrylamide/potassium chloride mud for drilling water-sensitive shales. Journal of Petroleum Technology, June, 719; also in Transactions AIME, 261
6. Steiger, R.P. (1982) Fundamentals and use of potassium/polymer drilling fluids to minimize drilling and completion problems associated with hydratable clays. Journal of Petroleum Technology, August, 1661
7. Reid, P.I. et al. (1993) Reduced environmental impact and improved drilling performance with water-base muds containing glycols. SPE 25989, Proc. 1993 SPE/EPA E&P Environmental Conference, San Antonio, TX, 7-10 March
8. Downs, J.D. et al. (1993) TAMME: A new concept in water-base drilling fluids for shales. SPE 26699, Proc. 1993 SPE Offshore European Conference, Aberdeen, UK, 7-10 September
9. Reid, P.I., Minton, R.C., and Twynam, A. (1992) Field evaluation of a novel inhibitive water-based drilling fluid for Tertiary shales. SPE 24979, Proc. 1992 SPE European Petroleum Conference, Cannes, France, 16-18 November
10. Elsen, J.M. et al. (1991) Application of a lime-based drilling fluid in a hightemperature/ high-pressure environment. SPE Drilling Engineering, March, 51
11. Hale, A.H. and Mody, F.K. (1993) Mechanism for wellbore stabilization with limebased muds. SPE 25706, Proc. 1993 SPE/IADC Drilling Conference, Amsterdam, Netherlands, 23-25 February
12. Beihoffer, T.W. et al. (1992) Field testing of a cationic polymer/brine drilling fluid in the North Sea. SPE 24588, Proc. 1992 SPE Annual Technical Conference and Exhibition, Washington, DC, 4-7 October
13. Hemphill, T. et al. (1992) Cationic drilling fluid improves ROP in reactive formations. Oil and Gas Journal, 8 June, 60
14. Welch, O. and Lee, L. (1992) Cationic polymer mud solves gumbo problems in North Sea. Oil and Gas Journal, 13 July, 53
15. Burba, J.L. et al. (1988) Laboratory and field evaluation of novel inorganic drilling fluid additive. IADC/SPE 17198, Proc. 1988 IADC/SPE Drilling Conference, Dallas, TX, 28 February-2 March
16. Burba, J.L. et al. (1990) Field evaluations confirm superior benefits of MMLHC fluid system on hole cleaning borehole stability, and rate of penetration. IADC/SPE 19956, Proc. 1990 IADC/SPE Drilling Conference, Houston, TX, 27 February-2 March
17. IDF (1990) Visplex system. Technical Bulletin, International Drilling Fluids, Houston, TX.
18. Simpson, J.P., Walker, T.O., and Jiang, G.Z. (1994) Environmentally acceptable water-base mud can prevent shale hydration and maintain borehole stability. SPE 27496, Proc. 1994 IADC/SPE Drilling Conference, Dallas, TX, 15-18 February
19. API (1994) Drilling fluids processing equipment. API Bulletin, 13C.
20. Goldsmith, R. and Hare, M. (1982) Solids analysis improves mud cost control. World Oil, June
21. Dearing, H.L. (1990) Material balance concepts aid in solids control and mud system evaluation. IADC/SPE 19957, Proc. 1990 IADC/SPE Drilling Conference, Houston, TX, 27 February-2 March
22. Beasley, R.D. and Dear, S.F., III (1989) A process engineering approach to drilling fluids management. SPE 19532, Proc. 64th Annual Technical Conference and Exhibition of SPE, San Antonio, TX, 8-11 October
23. Lal, M. (1988) Economic and performance analysis models for solids control. SPE 18037, Proc. 63rd Annual Conference and Exhibition of SPE, Houston, TX, 2-5 October
24. Sharples, V.M. and Nance, G.W. (1979) New computerized model optimizes solids control. SPE 8227, Proc. 54th Annual Conference and Exhibition of SPE/AIME, Las Vegas, NV, 23-26 September
25. Ardrey, W.E. et al. (1986) Automation of solids control system. IADC/SPE 14751, Proc. 1986 IADC/SPE Drilling Conference, Dallas, TX, 10-12 February
26. Sharma, S.P. (1984) Experimental investigation of the performance characteristics of hydrocyclones. SPE 13209, Proc. 59th Annual Technical Conference and Exhibition of SPE, Houston, TX, 16-19 September
27. Young, G.A. (1987) An experimental investigation of the performance of a 3-in. hydrocyclone. SPE/IADC 16175, Proc. 1987 SPE/IADC Drilling Conference, New Orleans, 15-18 March
28. Hoberock, L.L. (1980) A study of vibratory screening of drilling fluids. Journal of Petroleum Technology, November
29. Hoberock, L.L. (1990) Fluid conductance and separation characteristics of oilfield screen cloths. Proc. Fall Meeting of American Filtration Society, Baton Rouge, LA, 29-30 October
30. Thurber, N.E. (1988) Decanting centrifuge performance study. MS Thesis, Univ. of Tulsa, OK.
31. Field, J. and Anderson, B. (1972) An analytical approach to removing mud solids. Journal of Petroleum Technology, June
32. Patel, J. and Steinhauser, J. (1979) A material balance method to evaluate drillfluid solids removal equipment. Petroleum Engineer International, March
33. Froment, T.D. et al. (1986) A drilling contractor tests solids control equipment. IADC/ SPE 14753, Proc. IADC/SPE Drilling Conference, Dallas, TX, 10-12 February
34. Wojtanowicz, A.K. (1993) Dry drilling location: An ultimate source reduction challenge: Theory, design and economics. SPE 26013, Proc. SPE/EPA Exploration and Production Environmental Conference, San Antonio, TX, 7-10 March
35. Mongomery, M.S. and Love, W.W. (1993) Improve your solids control. World Oil, October, 59
36. American Association of Drilling Engineers (1999) Shale Shakers and Drilling Fluid Systems - Techniques and Technology for Improving Solids Control Management, Gulf Publishing Company, Houston, Texas
37. Thurber, N.E. (1992) Waste minimization for land-based drilling operations. Journal of Petroleum Technology, May, 542
38. Lal, M. and Thurber, N. (1989) Drilling wastes management and closed-loop systems, in Drilling Wastes (eds. F.R. Englehardt, J.P. Ray, and A.H. Gillam), Elsevier, London, pp. 213-28
39. Halliday, W.S. et al. (1993) Closed-loop operation with alternative dewatering technology. SPE Drilling and Completion, March, 45
40. Wojtanowicz, A.K. (1994) Optimization of drilling mud conditioning for chemically-enhanced centifuging. Proc. 45th Annual Technical Meeting of CIM, Calgary, Canada, 12-15 June, pp. 18.1-18.12
41. Wojtanowicz, A.K. (1994) Testing protocol and economic analysis of mud dewatering for closed-loop drilling systems. Proc. 45th Annual Technical Meeting of CIM, Calgary, Canada, 12-15 June, pp.19.1-19.21
42. Wojtanowicz, A.K. (1988) Modern solids control: A centrifuge dewatering process study. SPE Drilling Engineering, September, 315-23
43. Wojtanowicz, A.K. et al. (1987) Comparison study of solid/liquid separation techniques for oilfield pit closures. Journal of Petroleum Technology, July, 845-56
44. Malachosky, E. et al. (1989) The impact of the use of dewatering technology on the cost of drilling waste disposal. SPE 19528, Proc. 64th Annual Technical Conference and Exhibition of SPE, San Antonio, TX, 8-11 October
45. Sanders, J.M. (1989) Minimized hauloff while drilling in a zero-discharge area. SPE 19529, Proc. 64th Annual Technical Conference and Exhibition of SPE, San Antonio, TX, 8-11 October
46. Wojtanowicz, A.K. and Griffin, J.M. (1990) Drilling fluids dewatering: Application survey and case history economics, in Advances in Filtration and Separation Technology: Volume 1: Filtration and Separation in Oil and Gas Drilling and Production Operations, American Filtration Society, Houston, TX.
47. Sirgo, M.A. Jr. (1986) Regulatory changes impacting drilling and producing operations. Journal of Petroleum Technology, September 1989) How to choose a bioassay laboratory. Offshore, April
48. Ray, J.P. et al. (1989) Drilling fluid toxicity test: Variability in US commercial laboratories, in Drilling Wastes (eds. F.R. Englelhardt, J.P. Ray, and A.H. Gillam), Elsevier, London, pp. 731-55
49. Bland, R.G. et al. (1987) Toxicity of drilling fluids using photobacteria and Mysid shrimp bioassays. SPE 16689, Proc. 62nd Annual Technical Conference and Exhibition of SPE, Dallas, TX, 27-30 September
50. API (1989) Rapid Bioassay Procedures for Drilling Fluids, Publication No. 4481, API
51. Dorn, P.B. et al. (1990) Rapid methods for predicting compliance to drilling mud toxicity tests with Mysids for offshore NPDES general permits. Environmental Auditor, 1, 221-7
52. Hoskin, S.J. and Strohl, A.W. (1993) On-site monitoring of drilling fluids toxicity. SPE 26005, Proc. 1993 SPE/EPA E&P Environmental Conference, San Antonio, TX, 7-10 March
53. Wojtanowicz, A.K. et al. (1991) Cumulative bioluminescence - A potential rapid test of drilling fluid toxicity: Development study. SPE/IADC 21938, Proc. 1991 SPE/IADC Drilling Conference, Amsterdam, The Netherlands, 11-14 March
54. Jones, F.V. and Jardiolin, R.A. (1991) Field evaluation of toxicity of drilling fluids using computer applications. Proc. 1991 Petro-Safe Conference, Houston, TX, 6 February
55. Park, L.S. (1988) A new chrome-free lignosulfonate thinner performance without environmental concerns. SPE Drilling Engineering, September
56. Halliday, W.S. and Clapper, D.K. (1989) Toxicity and performance testing of nonoil spotting fluid for differentially stuck pipe. SPE 18684, Proc. 1989 SPE/IADC Drilling Conference, New Orleans, LA, 28 February-3 March
57. Clark, R.K. and Almquist, S.G. (1992) Evaluation of spotting fluids in a full-scale differential-pressure sticking apparatus. SPE Drilling Engineering, June, 121
58. Boyd, P.A. et al. (1983) New base oil used in low-toxicity oil muds. SPE 12119, Proc. 58th Annual Technical Conference and Exhibition, San Francisco, CA, 5-8 October
59. Thoresen, K.M. and Hinds, A.A. (1983) A review of the environmental acceptability and the toxicity of diesel oil substitutes in drilling fluid systems. IADC/SPE 11401, Proc. IADC/SPE 1983 Drilling Conference, New Orleans. LA, 20-23 February
60. James, R.W. and Helland, B. (1992) The Greater Ekofisk area: Addressing drilling fluid challenges with environmental justifications. SPE 25044, Proc. 1992 SPE European Petroleum Conference, Cannes, November
61. Park, S., Cullum, D., and McLean, A.D. (1993) The success of synthetic-based fluids offshore Gulf of Mexico: A field comparison to conventional systems. SPE 26354, Proc. 1993 SPE Annual Technical Conference and Exhibition, Houston, TX, 3-6 October
62. Hinds, A.A., Carlson, T., and Peresich, R. (1991) Industry searching for alternative to transport of drill cuttings: Biodegradable esters substitute for oil in drilling performance. Offshore, October, 30
63. Growcock, F.B. and Frederick, T.P. (1994) Operational limits of synthetic drilling fluids. SPE 29071, Proc. 1994 Offshore Technology Conference, Houston, TX, 2-5 May
64. Friedheim, J.E. and Conn H.L. (1996) Second generation synthetic fluids in the North Sea: Are they better? SPE 35061, Proc. IADC/SPE Drilling Conference, New Orleans, 12-15 March
65. MI Drilling Fluids Manual (1998) Synthetic systems. Houston, Texas
66. Hall, J. (2002) The new Gulf of Mexico National Pollutant Discharge Elimination System Permit: How does it shape-up, SPE 77391, Proc. SPE Annual Conference, San Antonio, Texas, 29 September-2 October
67. Candler, J. et al. (2000) Modification of standardized anaerobic biodegradation test to discriminate performance of various non-aqueous base fluids, SPE 61203, Proc. SPE Intl. Conference on Health, Safety, and the Environment, Stavanger, Norway, 26-28 June
68. Sumrow, M. (2002) Synthetic-based muds reduce pollution discharge, improve drilling. Oil and Gas Journal, 23 December
69. Jones, M. and Evangelist, R. (1986) A review of drill cuttings discharge technology and regulations. Proc. National Conference on Drilling Muds, EGWI, Norman, OK, 29-30 May, pp.188-211
70. Davies, S. (1986) An assessment of the development of cuttings cleaning systems within the context of North Sea offshore drilling. Conference Proceedings, Oil Based Drilling Fluids, Norwegian State Pollution Control Authority, Trondheim, 24-26 February, pp. 71-8
71. Jackson, S.A. and Kwan, J.T. (1984) Evaluation of a centrifuge drill-cuttings disposal system with a mineral oil-based fluid on Gulf Coast offshore drilling vessels. SPE 14157, Proc. SPE Annual Technical Conference and Exhibition. Houston, TX, 16-19 September
72. Kristensen, A. et al. (1986) Ultrasonic cleaning of oil rock particles. Conference Proceedings, Oil Based Drilling Fluids, Norwegian State Pollution Control Authority, Trondheim, 24-26 February, pp. 63-70
73. 1982) Hughes creates environmentally safe mud cleaning unit. Offshore, April, 147
74. Warnheim, T. and Sjoblom, J. (1986) A theoretical study of surfactant and surfactant systems suitable for washing of drill cuttings contaminated by oily mud. Conference Proceedings, Oil Based Drilling Fluids, Norwegian State Pollution Control Authority, Trondheim, 24-26 February, pp.47-54
75. Wiig, P.O. (1986) Cleaning of drilling cuttings in seawater/surfactant wash systems. Conference Proceedings, Oil Based Drilling Fluids, Norwegian State Pollution Control Authority, Trondheim, 24-26 February, pp. 55-62
76. Stephenson, R.L. et al. (2004) Thermal desorption of oil from oil-based drilling fluids cuttings: Processes and technologies, SPE 88486, Proc. SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, 18-20 October
77. Seaton, S. and Hall, J. (2005) Recovery of oil from drilled cuttings by liquefied gas extraction, SPE 92963, Proc. SPE International Symposium on Oilfield Chemistry, Houston, Texas, 2-4 February
78. Paulson, J.E. et al. (2003) Drill cuttings disposal balancing zero discharge and use of best available technique, SPE/IADC 85296, Proc. SPEIADC Middle East Drilling Technology Conference and Exhibition, Abu Dhabi, UAE, 20-22 October
79. Ayers, R.C. et al. (1989) The EPA/API diesel pill monitoring program, in Drilling Wastes (eds. F.R. Englelhardt, J.P. Ray, and A.H. Gillam), Elsevier, London, pp. 757-72
80. Sparlin, D.D. (1976) An evaluation of polyacrylamides for reducing water production. Journal of Petroleum Technology, August, 906-13
81. Zaitoun, A. and Kohler, N. (1989) Improved polyacrylamide treatments for water control in producing wells. SPE 18501, Proc. SPE International Symposium on Oilfield Chemistry, Houston, TX, 8-10 February, pp. 379-88
82. Kohler, N. and Zaitoun, A. (1991) Polymer treatment for water control in hightemperature production wells. SPE 21000, Proc. SPE International Symposium on Oilfield Chemistry, Anaheim, CA, 20-22 February, pp. 37-48
83. White, J.L. et al. (1973) Use of polymers to control water production in oil wells. Journal of Petroleum Technology, February, 143-50
84. Avery, M.R. (1988) Field evaluation of a new gelant for water control in production wells. SPE 18201, Proc. 63rd Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, Houston, TX, 2-5 October, pp. 203-14
85. Needham, R.B. et al. (1974) Control of water mobility using polymers and multivalent cations. SPE 4747, Proc. Third Symposium on Improved Oil Recovery, Tulsa, OK, 22-24 April
86. Terry, R.E. et al. (1981) Correlation of gelation times for polymer solutions used on mobility control agents. Society of Petroleum Engineers Journal, April, 229-35
87. Vossoughi, S. and Putz, A. (1991) Reversible in-situ gelation by the change of pH within the rock. SPE 20997, Proc. SPE International Symposium on Oilfield Chemistry, Anaheim, CA, 20-22 February, pp. 7-12
88. Jurinak, J.J. et al. (1989) Oilfield application of colloidal silica gel. SPE 18505, Proc. SPE International Symposium on Oilfield Chemistry, Houston, TX, 8-10 February, pp. 425-54
89. Smith, J.E. (1994) Closing the lab-field gap: A look at near-wellbore flow regimes and performance of 57 field projects. SPE 27774, Proc. SPE/DOE Ninth Symposium on Improved Oil Recovery, Tulsa, OK, 17-20 April, pp. 445-59
90. Liang, L., Sun, H., and Seright, R.S. (1995) Why Do Gels Reduce Water Pearmability More Than Oil Permeability? SPE 27829 (peer reviewed
91. Lang, K.R., Oliver, S.J., and Scheper, R.J. (1991) Optimization of gas production in the Antrim shale. SPE 21694, Proc. SPE Production Operation Symposium, Oklahoma City, OK, 7-9 April
92. EPA reclassifies waterless Antrim wells. Texas inventor holds patent on use of pump. Michigan's Oil and Gas News, 96(45), 9 November, 1990
93. Lintemuth, R. (1990) Antrim play proves strong catalyst in boosting Michigan drilling permit totals. Michigan's Oil and Gas News, 96(51-52), 21 December
94. Grubb, A.D. and Duball, D.K. (1992) Disposal tool technology extends gas well life and enhances profits. SPE 24796, Proc. 67th Annual Technical Conference and Exhibition of SPE, Washington, DC, pp.309-16
95. Bell, S. (1995) Downhole separation technology tested. Hart's Show Daily, Suppl. to Petroleum Engineer International, 23 October, 3
96. Kjos, T. et al. (1995) Downhole water-oil separation and water reinjection through well branches. SPE 030518, Proc. 1995 SPE Annual Technical Conference and Exhibition, Volume: Drilling, Dallas, TX, 22-25 October, pp.689-701
97. Wojtanowicz, A.K. et al. (1991) Oil well coning control using dual completion and tailpipe winter sink. SPE 21654, Proc. SPE Production Operations Symposium, Oklahoma City, OK, 7-9 April
98. Wojtanowicz, A. K. and Armenta, M. (2004) Assessment of downhole water sink technology for controlling water inflow at petroleum wells. Journal of Energy Resources Technology-Transactions ASME, 126, December, 334-41
99. Wojtanowicz, A. K. and Shirman, E. I. (2005) Water Cone Reversal in Oil Wells - An Analytical and Experimental Study., Mining Archives - Transactions of Polish Academy of Sciences, 50(1)3-16
100. Shirman, E. I. and Wojtanowicz, A. K. (2004) Reversal of water coning in wells with downhole water sink completion - Experimental analysis. Mining Archives - Transactions of Polish Academy of Sciences, 49(4), 437-52
101. Wojtanowicz, A.K. and Shirman, E.I. (2000) More oil using downhole water sink technology: A feasibility study. SPE Production and Facilities, 15(4), November, 234-240
102. Wojtanowicz, A.K. and Shirman, E.I. (2002) Inflow performance and pressure interference in dual-completed wells with water coning control. Journal of Energy Resources Technology-Transactions ASME, 124, December
103. Wojtanowicz, A.K. and Shirman, E.I. (1996) An in-situ method for downhole drainage-injection of formation brine in a single oil producing well, in Deep Injection Disposal of Hazardous and Industrial Waste (eds. J.A. Apps and C. Tsang), Academic Press, New York, pp. 403-20
104. Wojtanowicz, A.K. and Xu, H. (1992) A new in-situ method to minimize oilwell production watercut using downhole water loop. CIM 92-13, Proc. 43rd Annual Technical Meeting of CIM, Calgary, Canada, 7-10 June
105. Wojtanowicz, A.K. and Xu, H. (1995) Downhole water loop - A new completion method to minimize oilwell production watercut in bottom-water-drive reservoirs. Journal of Canadian Petroleum Technology, 3(8), October, pp. 56-62
106. Klein, S.T. and Thompson, S. (1992) Field study: Utilizing a progressive cavity pump for a closed-loop downhole injection system. SPE 24795, Proc. 67th Annual Technical Conference of SPE, Washington, DC, pp. 301-8
107. Cornitius, T. (1988) Advances in water treating solving production problems. Offshore, March
108. Meldrum, N. (1988) Hydrocyclones: A solution to produced-water treatment. SPE Production Engineering, November, 669-76
109. Yong, G.A. et al. (1991) Oil-water separation using hydrocyclones - An experimental search for optimum dimensions in environmental-control technology in petroleum engineering. Journal of Petroleum Science and Engineering, Special Issue (ed. A.K. Wojtanowicz), 11(1), April, 37-50; Advances in Filtration and Separation Technology, Volume 3, American Filtration Society, Gulf, pp. 102-23
110. LADEQ (1994) Water Quality Regulations, 3rd edn, LAC 33:IX.708. Louisiana Department of Environmental Quality, Baton Rouge, LA.
111. Wojtanowicz, A.K., Xu, H., and Bassiouni, Z. (1994) Segregated production method for oil wells with active water coning. Journal of Petroleum Science and Engineering, Special Issue: Environmental Control Technology in Petroleum Engineering, 11(1), April
112. Swisher, M.D. and Wojtanowicz, A.K. (1995) In situ-segregated production of oil and water - A production method with environmental merit: Field application. SPE 29693, Proc. SPE/EPA Exploration & Production Environmental Conference, Houston, TX, 27-29 March
113. Swisher, M.D. and Wojtanowicz, A.K. (1995) New dual completion method eliminates bottom water coning. SPE 30697, Proc. SPE Annual Technical Conference and Exhibition, Volume: Production, Dallas, TX, 22-25 October, pp. 549-55
114. Broek, W.M.G.T. and Plat, R. (1991) Characteristics and possibilities of some techniques for deoiling of production water. SPE 23315, Proc. First International Conference on Health and Safety and Environment, The Hague, The Netherlands, 10-14 November, pp. 47-54
115. Brown and Root Inc. (1974) Determination of Best Practicable Control Technology Currently Available to Remove Oil from Water Produced with Oil and Gas, Report prepared for the Offshore Operations Committee, Sheen Subcommittee, New Orleans, LA.
116. EPA (1981) Oil Content in Produced Brine on Ten Louisiana Production Platforms, EPA-600/2-81-209. EPA, Cincinnati, OH.
117. Jackson, G.F. and Humes, E.E. (1983) Oil content in produced brine on 10 production platforms. SPE 12195, Proc. 58th Annual Technical Conference and Exhibition, San Francisco, CA, 5-8 October
118. Strickland, W.T., Jr. (1980) Laboratory results of cleaning produced water by gas flotation. Society of Petroleum Engineers Journal, June, 175-90
119. Leech, C.A. et al. (1978) Performance evaluation of induced gas flotation (IGF) machine through math modeling, OTC 3342, Proc. 10th Annual Offshore Technology Conference, Houston, TX, 8-11 May, pp. 2513-22
120. Wojtanowicz, A.K. (1993) Oilfield environmental control technology: A synopsis. Journal of Petroleum Technology, February, 166-72
121. Gay, J.C. et al. (1987) Rotary cyclone will improve oily water treatment and reduce space/weight requirement on offshore platforms. SPE 16571, Proc. Offshore Europe '87, Aberdeen, UK, 8-11 September
122. Alfa-Laval Industry (1989) Oily Water Treatment in Oilfield Industry, Alfa Laval, Maarssen, The Netherlands
123. Chen, A.S.C. et al. (1990) Removal of oil, grease, and suspended solids from produced water using ceramic crossflow microfiltration, in Advances in Filtration and Separation Technology, Volume 3: Pollution Control Technology for Oil and Gas Drilling and Production Operations, American Filtration Society, Kingwood, TX, 292-317
124. Hagen, R.D. and Lorne, C.G. (1988) Membralox crossflow microfiltration of heavy oil produced water. Proc. Quarterly Meeting of Canadian Heavy Oil Association, Calgary, Alberta, 25 October
125. Petrakis, L. and Ahner, P.F. (1976) Use of high-gradient magnetic separation techniques for the removal of oil and solids from water effluents. IEEE Transactions on Magnetics, MAG-12(5), September, 486-8
126. Weintraub, M.H. et al. (1983) Development of electrolytic treatment of oily wastewater. Environmental Progress, 2(1), February, 32-7
127. Balmer, L.M. and Foulds, A.W. (1986) Separating oil from oil-in-water emulsions by electroflocculation/electroflotation. Filtration and Separation, November/ December, 366-70
128. Burke, R.G. (1985) Cleanup of oily water poses a challenge. Offshore, September, 100-6
129. Clean water, clear choices. Journal of Petroleum Technology, January 1994, 24-6
130. GRI (1995) A Regional Assessment of Produced Water Treatment and Disposal Practices and Research Needs. GRI-95/0301, Gas Research Institute, Chicago
131. GRI (1995) GRI-Pro W CalcTM, Gas Research Institute - Produced Water Calculation Cost Model User's Manual. GRI-95/0302, Gas Research Institute, Chicago