Corrosion and surface protections

Magnesium Technology: Metallurgy, Design Data, Applications

Volumn , Issue , 2006, Pages 431-497

  Kurze, Peter ^a  

^a AHC Oberflähentechnik GmbH and Co KG OGH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84889962365     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/3-540-30812-1_7     Document Type: Chapter

References (86)

1. Weast RC (1986-1987) CRC Handbook of Chemistry and Physics, 67th Edition, CRC Press, Inc., Boca Raton, Florida
2. Ono S (1998) Metallurgical Science and Technology, Vol. 16, Nos. 1-2, Nov. Surface phenomena and protective film growth on magnesium and magnesium alloys, pp. 91-104
3. Pourbaix M (1974) Atlas of Electrochemical Equilibria in Aqueous Solutions, Second English Edition, National Association of Corrosion Engineers, Houston
4. Schichtel G (1954) Magnesium-Taschenbuch, VEB Verlag Technik, Berlin
5. Beck A (1939) Magnesium und seine Legierungen, Springer-Verlag, Berlin
6. Kurze P (1999) Korrosionsschutz durch neue chromfreie Passivierung von Magnesiumwerkstoffen, 7. Magnesium Automotive Seminar der Europäischen Forschungsgemeinschaft Magnesiumguss e. V., Tagungsband, Aalen, 29./30.09.1999
7. Norsk Hydro, Datenblatt Oberflächenbehandlung
8. DOW MAGNESIUM (1990) Operations in Magnesium Finishing, The Dow Chemical Company
9. Simon H and Thoma G (1985) Angewandte Oberflächentechnik für metallische Werkstoffe, Carl Hanser Verlag, München-Wien
10. Blumenthal G et al. (1999) Chromatierungen auf Zinkschichten, Metalloberfläche 53(10), pp. 10-17
11. Jimenez A and Schmidt HA (1999) Chrom (VI)-freie Nachbehandlungsverfahren, Metalloberfläche 53(9), pp. 46-49
12. Hawk D and Albright DL (1995) Metal Finishing 10, pp. 34-38
13. Takaya M (1996) The Formation Manganese-Type Chemical Conversion Coating for Magnesium Alloys, Tagungsband Interfinish 96. World Congress 10.-12. September, pp. 425-441
14. Kurze P, Singe T and Diesing J (2000) Korrosionsschutz von Magnesiumwerkstoffen, Metalloberfläche 54(9), pp. 22-24
15. Keller F, Hunter MS and Robinson DL (1953) J. Electrochem. Soc. 100, pp. 411
16. Bradford PM et al. (1976) Corros. Sci. 16, pp. 747
17. Guldbrandsen E, TaAo J and Olsen A (1993) Corros. Sci. 34, pp. 1423
18. Gmelin (1952) Handbuch der anorganischen Chemie, Syst. Nr. 27 Magnesium, Teil 1, Verlag Chemie GmbH, Weinheim, 8. Auflage, pp. 760-818
19. Dettner, Elze (1969) Handbuch der Galvanotechnik, Band III, Carl Hanser Verlag, pp. 179-190
20. Metals Handbook (1982) 9. Edition, Vol. 5, ASM, Ohio, pp. 628-649
21. Emeley EF (1966) Principles of Magnesium Technology, Pergamon Press, Oxford, London, Edinburgh, N. Y., Paris, Frankfurt, pp. 670-735
22. Rauscher G (2000) Jahrbuch Oberflächentechnik 2000, Die Entwicklung der Anodisation von Magnesium, Band 56, Giesel Verlag GmbH, Isernhagen/Germany, pp. 185-210
23. Evangelides HA (1958) Magnesium and Protective Coatings for Magnesium, Plating 45(5), pp. 493-498
24. Magnesium Taschenbuch (2000) Herausgeber Aluminium-Zentrale Düsseldorf, Aluminium Verlag, Düsseldorf, 1. Auflage
25. Magnesium - Anwendungen, Potenziale, Eigenschaften (2000) Herausgeber Kainer KU, WILEY-VCH Verlag GmbH, Weinheim, Germany
26. Nikolaev AV, Markov GA and Pishchevitskii BI (1977) A new phenomenon in elctrolysis, Izv. SO AN SSSR, Ser. Khim Nauk, 5(12), pp. 32-33
27. Wirtz GP and Brown SD (1991) Ceramic Coartings by anodic spark deposition, Materials & Manufacturing Processes 6(1), pp. 87-115
28. Kurze P (1990) Anodische Oxidation unter Funkenentladungen auf Metalloberflächen in wäßrigen Elektrolyten-Grundlagen und Anwendungen, Dechema-Monographien Band 121, VCH-Verlagsgesellschaft, pp. 167-181
29. Mobley C, Brevick J, Murray M and Rodrigo D (2000) The Effect of Coatings on Selected Mechanical Properties of Magnesium Alloy Die Castings, Die Casting Engineer Juli/Aug., pp. 36-39
30. Günterschulze A and Betz H (1934) Z. Physik (78), pp. 196-210
31. (1932) Z. Physik (91), pp. 70-96
32. Kurze P, Krysmann W, Schreckenbach J, Schwarz T and Rabending K (1987) Cryst. Res. Technol. 22(1), S. 53-58
33. Olbertz B and Haug AT (1989) Metalloberfläche 43(4), S. 174-178
34. Kurze P (1992) Electro chemicals Coatings of MagnesiumAlloys, DGM-Jahrestagung Garmisch-Partenkirchen, April, pp. 127-132
35. Kurze P (1994) Magnesium elektrochemisch beschichten, Metalloberfläche 48(2), pp. 104-105
36. Kurze P and Banerjee D (1996) Eine neue anodische Beschichtung zur Verbesserung der Korrosions-und Verschleißbeständigkeit von Magnesiumwerkstoffen, Gießerei - Praxis (11/12), pp. 211-217
37. Kurze P (1998) Herstellung keramischer Schichten auf Leichtmetallen mittels plasmachemischer Verfahren in Elektrolyten, Mat.-wiss. u. Werkstofftech. 29, pp. 85-89
38. US 5, 470, 664
39. Zozulin AJ and Bartak DE (1994) Anodized Coatings for Magnesium Alloys, Metal Finishing 3, pp. 39-44
40. Rogers R and Boyd ML (1948) Galvanische Metallüberzüge auf Magnesiumlegierungen, Sheet Metal Ind. 25, pp. 959-962
41. De Long HK (1948) Elektroplattieren von Magnesium, Materials and Methods 27, pp. 63-65
42. Thews ER (1953) Englische Verfahren zur Elektroplattierung von Magnesium und seinen Legierungen, Metalloberfläche 5, pp. 110-111
43. Holländer A (1995) Chemische Vernickelung von Magnesium, Metalloberfläche 49(4), pp. 265-267
44. Sharma AK et al. (1998) Electroless Nickel Plating on Magnesium Alloy, Metal Finishing 3, pp. 10-18
45. Shigematsu I et al. (2000) Surface Treatment of AZ 91D Magnesium Alloy by Aluminium Duffusion Coating, Journal of Materials Science 19(6), pp. 473-475
46. Klein LC (1988) Sol-Gel-Technology for Thin Films, Fibers, Preforms, Electronics, and Specialty Shapes, Noyes Publications, Park Ridge, New Jersey, USA
47. Bothwell MR (1967) Magnesium Corrosion, in The Corrosion of Light Metals, Godard H, Jepson WB, Bothwell MR, Kane LR, Editors, Wiley J and Sons, Inc., New York, pp. 259-311
48. Loose WS (1948) The Corrosion Handbook, Uhlig HH, Edt, Wiley J and Sons, New York, pp. 218-252
49. Bengough GD and Whitby L (1933) Trans. Inst. Chem. Eng., Vol. 11, pp. 176-189
50. Hanawalt JD, Nelson CE and Peloubet JA (1942) Corrosion Studies of Magnesium and Its Alloys, Transactions AIME, Vol. 147, pp. 273-299
51. Mercer WE and Hillis JE (1992) The Critical Contaminant Limits and Salt Water Corrosion Performance of Magnesium AE42 Alloy, Paper 920073, Society of Automotive Engineers, Detroit, MI
52. Pekguleryuz M and Baril E (2001) Development of Creep Resistant Mg-Al-Sr Alloys, Magnesium Technology 2001, (Hryn JN, ed.), The Minerals, Metals and Materials Society, Warrendale, PA, pp. 119-125
53. Labelle P, Pekguleryuz M, Argo D, Dierks M, Sparks T and Waltematte T (2001) Heat Resistant Magnesium Alloys for Power-Train Applications, Light Metal Applications for the Automotive Industry - Aluminum and Magnesium, Paper 2001-01-0424, Society of Automotive Engineers, Detroit, pp. 47-54
54. Luo AA and Powell BR (2001) Tensile and Compressive Creep of Magnesium-Aluminum-Calcium Based Alloys, Magnesium Technology 2001, (Hryn JN, ed.), The Minerals, Metals and Materials Society, Warrendale, PA, pp. 137-144
55. Powell BR, Luo AA, RezhetsV, Bommarito JJ and Tiwari BL (2001) Development of Creep-Resistant Magnesium Alloys for Powertrain Applications; Part 1 of 2, Light Metal Applications for the Automotive Industry - Aluminum and Magnesium, Paper 2001-01-0424, Society of Automotive Engineers, Detroit, pp. 29-36
56. Luo AA, Balogh MP and Powell BR (2001) Tensile Creep and Microstructure of Magnesium-Aluminum-Calcium Bsed Alloys for Powertrain Applications - Part 2 of 2, Light Metal Applications for the Automotive Industry - Aluminum and Magnesium, Paper 2001-01-0424, Society of Automotive Engineers, Detroit, pp. 37-45
57. Aune TK (1983) Minimizing Base Metal Corrosion on Magnesium Products. The Effet of Elemental Distribution (Structure) on Corrosion Behavior, Proceedings of the International Magnesium Association, Toronto
58. Hillis JE (1983) The Effects of heavy Metal Contamination on Magnesium Corrosion Performance, Paper 830523, Society of Automotive Engineers, Detroit, MI
59. Reichek KN, Clark KJ and Hillis JE (1985) Controlling the Salt Water Corrosion Performance of Magnesium AZ91 Alloy, Paper 850417, Society of Automotive Engineers, Detroit, MI
60. Hillis JE and Reichek RN (1986) High Purity Magnesium AM60 Alloy: The Critical Contaminant Limits and the Salt Water Corrosion Performance, Paper 860288, Society of Automotive Engineers, Detroit, MI
61. Hillis JE, Murray RW and Mercer II WE (1998) Compositional Requirements for Quality Performance with High Purity Magnesium Alloys, Proceedings of the International Magnesium Association, San Diego, pp. 74-81
62. Shook SO and Hillis JE (1989) Composition and Performance of an Improved Magnesium AS41 Alloy, Paper 890205, Society of Automotive Engineers, Detroit, MI
63. Clark KJ (1986) AZ91E Magnesium Sand Casting Alloy, The Standard for Excellent Corrosion Performance, Proceedings of the International Magnesium Association, Los Angeles
64. Hawke DL, Hillis JE, Pekguleryuz M and Nakatsugawa I (1999) Corrosion Behavior, in Magnesium and Magnesium Alloys, (Avedesian A and Baker H, Editors), ASM International, Materials Park, OH, pp. 194-210
65. Stress Corrosion Cracking (1999) in Magnesium and Magnesium Alloys, (Avedesian A and Baker H, Editors), ASM International, Materials Park, OH, pp. 211-215
66. Beck A (1940) The Technology of Magnesium Alloys, 2nd ed., F. A. Hughes and Co. Ltd., London, pp. 294-297
67. Logan HL and Hessing H (1950) Stress Corrosion of Wrought Magnesium Base Alloys, Journal of Research of the National Bureau of Standards, Vol. 44, pp. 233-243
68. Murray RW and Hillis JE (1990) Magnesium Finishing: Chemical Treatment and Coating Practices, Paper 900791, Society of Automotive Engineers, Detroit, MI
69. Pelensky MA and Gallaccio A (1967) Stress Corrosion of Magnesium Alloys - Environmental Factors, in Stress Corrosion Testing, ASTM STP 425, American Society for Testing and Materials, Philadelphia, pp. 107-115
70. Loose WS and Barbian HA (1945) Stress-Corrosion Testing of Magnesium Alloys, in Symposium on Stress Corrosion Cracking of Metals, American Society for Testing and Materials, Philadelphia, pp. 273-292
71. Miller WK (1992) Stress Corrosion Cracking of Magnesium Alloys, in Stress-Corrosion Cracking: Material Performance and Evaluation, ASM International, Metals Park, OH, pp. 251-263
72. Sager GF, Brown RH and Mears RB (1945) Tests for Determining Susceptibility to Stress-Corrosion Cracking, in Symposium on Stress-Corrosion Cracking of Metals, American Society for Testing and Materials, Philadelphia, pp. 15-36
73. Liu HW (1970) Stress-Corrosion Cracking and the Interaction Between Crack-Tip Stress Field and Solute Atoms, Transaction of the ASME, Journal of Basic Engineering, Vol. 92, pp. 633-638
74. Ebtehaj K, Hardie D and Parkins RN (1988) The Influence of Chloride-Chromate Solution Composition on the Stress-Corrosion Cracking of Mg-Al Alloy, Corrosion Science, Vol. 9, pp. 849-851
75. Ogarevic VV and Stephens RI (1990) Fatigue of Magnesium Alloys, Annual Review of Materials Science, Vol. 20, pp. 141-177
76. Wendt J, Hilpert M, Kiese J and Wagner L (2001) Surface and Environmental Effects on the Fatigue Behavior of Wrought and Cast Magnesium Alloys, Magnesium Technology 2001 (J. Hryn, editor), TMS, New Orleans, LA, February, pp. 281-285
77. Ferguson WG, Liu W, Ross P and MacCulloch J (2001) Corrosion Fatigue of High Pressure Die Cast Magnesium Alloys, Magnesium Technology 2001 (J. Hryn, editor), TMS, New Orleans, LA, February, pp. 269-274
78. Hillis JE and Murray RW (1987) Finishing Alternatives for High Purity Magnesium Alloys, Paper G-T87-, Society of Die Casting Engineers 14th International Congress and Exposition, Toronto
79. Bartak DE, Schleisman TD and Woolsey ER (1991) Electrodeposition and Characteristics of a Silicon-Oxide Coating for Magnesium Alloys, Proceedings of the International Magnesium Association, Quebec City, pp. 55-60
80. Skar JI and Albright D (2000) Phosphate-Permanganate: A Chrome Free Alternative for Magnesium Pretreatment, Magnesium Alloys and Their Applications, Wiley VCH, Weinheim, Germany, pp. 469-474
81. Cleaning and Finishing (1999) in Magnesium and Magnesium Alloys, (Avedesian A and Baker H, Editors), ASM International, Materials Park, OH, pp. 138-162
82. Hawke DL (1986) Compatibility of Magnesium Alloys with Methanol Fuels, Paper 86025, Society of Automotive Engineers, Detroit, MI
83. Milbrath DS and Owens JG (2001) New Fluorochemical Cover Gases for Protection of Molten Magnesium, Presentation at the Annual World Magnesium Conference, International Magnesium Association, Brussels, May
84. 2 in the Magnesium Industry - An IMA/SINTEF-NTU Cooperative Project, Proceedings of the International Magnesium Association, Brussels, pp. 69-73
85. Hawke DL, Hillis JE and Unsworth W (1988) Preventive Practice for Controlling the Galvanic Corrosion of Magnesium Alloys, International Magnesium Association, McLean, VA
86. Hawke DL (1987) Galvanic Corrosion of Magnesium, Paper G-T87-004, Society of Die Casting Engineers 14th International Die Casting Congress and Exposition, Toronto