Hydrogen Separation Membranes

Advanced Membrane Technology and Applications

Volumn , Issue , 2008, Pages 671-684

  Ma, Yi Hua ^a  

^a Worcester Polytechnic Institute   (United States)

Author keywords

High temperature hydrogen separation application; Hydrogen separation and porous nonmetallic membranes; Membrane separations low cost, operation ease and modular arrangement

Indexed keywords

EID: 84889869107     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470276280.ch25     Document Type: Chapter

References (63)

1. Ayturk, M. E., Mardilovich, I. P., Engwall, E. E., and Ma, Y. H. (2004). Microstructure analysis of Pd/Ag alloy membranes supported on porous stainless steel. In Proceedings of the AIChE 2004 Annual Meeting, Austin, TX, Nov. 7-12, 2004.
2. Balachandran, U. (Balu), Lee, T. H., Chen, L., Song, S. J., Picciolo, J. J., and Dorris, S. E. (2005). Hydrogen permeation and chemical stability of dense hydrogen separation membranes. In Proceedings of the 22nd Annual International Pittsburgh Coal Conference, Pittsburgh, PA, Sept. 12-15, 2005.
3. Bollinger, W. A., Long, S. P., and Metzger, T. R. (1984). Optimizing hydrocracker hydrogen. Chem. Eng. Prog. 80(5), 51.
4. Bryden, K. J., and Ying, J. Y. (1995). Nanostructured palladium membranes synthesis by magnetron sputtering. Mater. Sci. Eng. A204, 140.
5. Buxbaum, R. E., and Kinney, A. B. (1996). Hydrogen transport through tubular membranes of palladium-coated tantalum and niobium. Ind. Eng. Chem. Res. 35, 530.
6. Buxbaum, R. E., and Marker, T. L. (1993). Hydrogen transport through non-porous membranes of palladium-coated niobium, tantalum and vanadium. J. Membr. Sci. 85, 29.
7. Collins, J. P., and Way. J. D. (1993). Preparation and characterization of a composite palladiumceramic membrane. Ind. Eng. Chem. Res. 32, 3006.
8. Edlund, D. J., and McCarthy, J. (1995). The relationship between intermetallic diffusion and flux decline in composite-metal membranes: Implications for achieving long membrane lifetime. J. Membr. Sci. 107, 147.
9. Galuszka, J., Giddings, T., and Clelland, I. (2006). Silica H-membrane thermal and hydrothermal stability. In R. Bredsen and H. Reader (Eds.) Proceedings of the 9th International Conference on Inorganic Membranes, Lillehammer, Norway, June 25-26, 2006, p. 124.
10. Gardner, R. J., Crane, R. A., and Hannan, J. F. (1977). Hollow fiber permeator for separating gases. Chem. Eng. Prog. 73(10), 76.
11. Govind, R., and Atnoor, D. (1991). Development of a composite palladium membrane for selective hydrogen separation at high temperature. Ind. Eng. Chem. Res. 30, 591.
12. Gryaznov, V. (2000). Metal containing membranes for the production of ultrapure hydrogen and the recovery of hydrogen isotopes. Sep. Purif. Methods 29(2), 171.
13. Gryaznov, V. M., Serebryannikova, O. S., Serov, M. Yu., Ermilova, M. M., Karavanov, A. N., Mischenko, A. P., and Orekhova, N. V. (1993). Preparation and catalysis over palladium composite membranes. Appl. Catal. A: General 96, 15.
14. Guazzone, F. (2006). Engineering of substrate surface for the synthesis of ultra-thin Pd and Pd-Cu membranes for H2 Separation. Ph.D. Dissertation, Worcester Polytechnic Institute, Worcester, MA.
15. Hong, M., Falconer, J. L., and Noble, R. D. (2005). Modification of zeolite membranes for H2 separation by catalytic cracking of methyldiethoxysilane. Ind. Eng. Chem. Res. 44, 4035.
16. Huang, T. C., Wei, M. C., and Chen, H. I. (2001). Permeation of hydrogen through palladium/alumina composite membranes. Sep. Sci. Technol. 36, 199.
17. Hybertson, B. M., Hansen, B. N., Barkley, R. M., and Sievers, R. E. (1991). Deposition of palladium films by a novel supercritical fluid transport-chemical deposition process. Mater. Res. Bull. 26, 1127.
18. Jayaraman, V., and Lin, Y. S. (1995). Synthesis and hydrogen permeation properties of ultrathin palladium-silver alloy membranes. J. Membr. Sci. 99, 89.
19. Kikuchi, E., and Uemiya, S. (1991). Preparation of supported thin palladium-silver alloy membranes and their characteristics for hydrogen separation. Gas Sep. Purif. 5, 261.
20. Knapton, A. G. (1977). Palladium alloys for hydrogen diffusion membranes-A review of high permeability materials. Plat. Met. Rev. 21, 44.
21. Konno, M., Shindo, M., Sugawara, S., and Saito, S. (1988). A composite palladium and porous aluminum oxide membrane for hydrogen gas separation. J. Membr. Sci. 37, 503.
22. Koresh, J. (1987). Carbon molecular sieve membranes: General properties and the permeability of CH4/H2 mixtures. Sep. Sci. Technol. 22, 973.
23. Koresh, J. E., and Soffer, A. (1983). Molecular sieve carbon membranes for gas separation. Sep. Sci. Technol. 18, 723.
24. Koresh, J. E., and Soffer, A. (1986). Mechanism of permeation through molecular-sieve carbon membrane. J. Chem. Soc. Faraday Trans. I82, 2057.
25. Koros, W. J., and Mahajan, R. (2000). Pushing the limits on possibilities for large scale gas separation:Which strategies? J. Membr. Sci. 175, 181.
26. Kulprathipanja, A., Alptekin, G. O., Falconer, J. L., andWay, J. D. (2005). Pd and Pd-Cu membranes:Inhibition of H2 permeation by H2S. J. Membr. Sci. 254, 49.
27. Kulprathipanja, S. (2003). Mixed matrix membrane development. Ann. N. Y. Acad. Sci. 984, 361.
28. Kumakiri, I., Yamaguchi, T., and Nakao, S. (1999). Preparation of zeolites A and faujasite membranes from a clear solution. Ind. Eng. Chem. Res. 38, 4282.
29. Lee, D.-W., Nam, S.-E., Sea, Ihm, S.-K., and Lee, K.-H. (2004). Permeation behavior of a H2/CO gaseous mixture through Pt-included composite membranes. J. Membr. Sci. 243, 243.
30. Lewis, F. A. (1967). The Palladium Hydrogen System. Academic, London.
31. Li, Z. Y., Maeda, H., Kusakabe, K., Morooka, S., Anzai, H., and Akiyama, S. (1993). Preparation of palladium-silver alloy membranes for hydrogen separation by the spray pyrolysis method. J. Membr. Sci. 78, 247.
32. Ma, Y. H., Mardilovich, I. P., and Engwall, E. E. (2003). Thin composite palladium and palladium/alloy membranes for hydrogen separation. Ann. N. Y. Acad. Sci. 984, 346.
33. Ma, Y. H., Mardilovich, I. P., and Engwall, E. E. (2004a). Method for fabricating composite gas separation modules. U.S. Patent application 20040237780.
34. Ma, Y. H., Mardilovich, I. P., and Engwall, E. E. (2004b). Composite gas separation modules having high Tamman temperature intermediate layers. U.S. Patent application 20040244590.
35. Ma, Y. H., Mardilovich, I. P., and Engwall, E. E. (2004c). Method for curing defects in the fabrication of a composite gas separation module. U.S. Patent application 20040244583.
36. Ma, Y. H., Mardilovich, I. P., and Engwall, E. E. (2004d). Composite gas separation modules having intermediate porous metal layers. U.S. Patent application 20040237779.
37. Ma, Y. H., Mardilovich, P. P., and She, Y. (1998). Stability of hydrogen flux through Pd/porous stainless composite membranes. In Proceedings of the ICIM6, Nagoya, Japan, June 22-26, 1998, pp. 246-249.
38. Ma, Y. H., Mardilovich P. P., and She, Y. (2000). Hydrogen gas-extraction module and method of fabrication. U.S. Patent 6,152,987 (2000).
39. Ma, Y. H., and Matzakos, A. (2005). Composite palladium porous stainless membranes for hydrogen separation and reaction applications: An example of university-industry collaboration. In Proceedings of the North American Membrane Society Annual Meeting, Providence, RI, June 11-15, 2005.
40. Ma, Y. H., Zhou, Y., Poladi, R., and Engwall, E. (2001). The synthesis and characterization of zeolite A membranes. Sep. Purif. Technol. 25, 235.
41. Mardilovich, P. P., She, Y., Ma, Y. H., and Rei, M. H. (1998). Defect-free palladium membranes on porous stainless-steel support. AIChE J. 44, 310.
42. Morigami, Y., Kondo, M., Abe, J., Kita, H., and Okamoto, K. (2001). The first large-scale pervaporation plant using tubular type module with zeolite NaA membrane. Sep. Purif. Technol. 25, 251.
43. Morooka, S., Yan, S., Yokoyama, S., and Kusakabe, K. (1995). Palladium membrane formed in macropores of support tube by chemical vapor deposition with crossflow through a porous wall. Sep. Sci. Technol. 30, 2877.
44. Nam, S. E., and Lee, K. H. (2001). Hydrogen separation by Pd alloy composite membranes:Introduction of diffusion barrier. J. Membr. Sci. 192, 177.
45. Paglieri, S. N., Foo, K. Y., Way, J. D., Collins, J. P., and Harper-Nixon, D. L. (1999). A new preparation technique for Pt/alumina membranes with enhanced high-temperature stability. Ind. Eng. Chem. Res. 38, 1925.
46. Peachey, N. M., Snow, R. C., and Dye, R. C. (1996). Composite Pd/Ta metal membranes for hydrogen separation. J. Membr. Sci. 111, 123.
47. Poffenbarger, G. L., and Gastinne, P. (1989). Hydrogen applications and design considerations. In Proceedings of the AIChE Spring National Meeting and Petrochemical Refining Exposition, Houston, TX, Apr. 3, 1989.
48. Prabhu, A. K., and Oyama, S. T. (2000). Highly hydrogen selective ceramic membranes. J. Membr. Sci. 176, 243.
49. Rao, M. B., and Sircar, S. (1993). Nanoporous carbon memb ranes for separation of gas mixtures by selective surface flow. J. Membr. Sci. 85, 253.
50. Rao, M. B., Sircar, S., and Golden, T. C. (1992). Gas separation by adsorbent membranes. U.S. Patent 5,104,425.
51. Shu, J., Adnot, A., Grandjean, B. P. A., and Kaliaguine, S. (1996). Structurally stable composite Pd-Ag alloy membranes: Introduction of a diffusion barrier. Thin Solid Films 286, 72.
52. Shu, J., Grandjean, B. P. A., Ghali, E., and Kaliaguine, S. (1993). Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating. J. Membr. Sci. 77, 181.
53. Shu, J., Grandjean, B. P. A., Van Neste, A., and Kaliaguine, S. (1991). Catalytic palladium-based membrane reactors: A review. Can. J. Chem. Eng. 69, 1036.
54. Sircar, S., and Rao, M. B. (2000). Nano-porous carbon membranes for gas separation. In N. Kanellopoulos (Ed.), Recent Advances on Gas Separation by Microporous Membranes. Elsevier, Amsterdam, The Netherlands, p. 473.
55. Souleimanova, R. S., Mukasyan, A. S., and Varma, A. (2002). Pd membranes formed by electroless plating with osmosis: H2 permeation studies. AIChE J. 48, 262.
56. Tong, J., Shirai, R., Kashima, Y., and Matsumura, Y. (2005). Preparation of a pinhole-free Pd-Ag membrane on a porous metal support for pure hydrogen separation. J. Membr. Sci. 260, 84.
57. Uemiya, S., Kude, Y., Sugino, K., Sato, N., Matsuda, T., and Kikuchi E. (1988). A palladium/porousglass composite membrane for hydrogen separation. Chem. Lett. 10, 1687.
58. Uemiya, S., Sato, N., Ando, H., Kude, Y., Matsuda, T., and Kikuch, E. (1991). Separation of hydrogen through palladium thin film supported on a porous glass tube. J. Membr. Sci. 56, 303.
59. Welk, M., and Nernoff, T. M. (2004). H2 separation through zeolite thin film membranes. Prepr. Pap. Am. Chem. Soc. Div. Fuel Chem. 49, 889.
60. Yan, S., Maeda, H., Kusakabe, K., and Morooka, S. (1994). Thin palladium membrane formed in support pores by metal-organic chemical vapor deposition method and application to hydrogen separation. Ind. Eng. Chem. Res. 33, 616.
61. Yeung, K. L., Christiansen, S. C., and Varma, A. (1999). Palladium composite membranes by electroless plating technique, relationship between plating kinetics, film microstructure and membrane performance. J. Membr. Sci. 159, 107.
62. Yeung, K. L., and Varma, A. (1995). Novel preparation techniques for thin metal-ceramic composite membranes. AIChE J. 41, 2131.
63. Zhu,W., Gora, L., van den Berg, A.W. C., Kapteijn, F., Jansen, J. A., and Moulin, J. A. (2005). Water vapour separation from permanent gases by a zeolite-4A membrane. J. Membr. Sci. 253, 57.