Theoretical Aspects of Flow Analysis

Advances in Flow Analysis

Volumn , Issue , 2008, Pages 1-42

  Iñón, Fernando A ^a   Tudino, Mabel B ^a  

^a UNIVERSIDAD DE BUENOS AIRES   (Argentina)

Author keywords

Convection; Diffusion; Dispersion; Flow systems; Fluid transport; Transport models

Indexed keywords

EID: 84889867897     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527623259.ch1     Document Type: Chapter

References (85)

1. Skeggs, L.J. (1957) An automatic method for colorimetric analysis. American Journal of Clinical Pathology, 28, 311-322.
2. Ruzicka, J. and Hansen, E.H. (1975) Flow Injection Analysis. Part I. Anew concept of fast continuous flow analysis. Analytica Chimica Acta, 78, 145-157.
3. Ruzicka, J., Marshall, G.D. and Christian, G.D. (1990) Variable Flow Rates and Sinusoidal Flow Pump Flow Injection Analysis. Analytical Chemistry, 62, 1861-1866.
4. Ruzicka, J. and Marshall, G.D. (1990) Sequential injection: a new concept for chemical sensors, process analysis and laboratory assays. Analytica Chimica Acta, 237, 329-343.
5. Gubeli, T., Christian, G.D. and Ruzicka, J. (1991) Fundamentals of sinusoidal flow sequential injection spectrophotometry. Analytical Chemistry, 63, 1861-1866.
6. Gubeli, T., Christian, G.D. and Ruzicka, J. (1991) Principles of stopped-flow sequential injection analysis and its application to the kinetic determination of traces of a proteolytic enzyme. Analytical Chemistry, 63, 1680-1685.
7. Baron, A., Guzman, M., Ruzicka, J. and Christian, G.D. (1992) Novel singlestandard calibration and dilution method performed by the sequential injection technique. Analyst, 117, 1839-1844.
8. Masini, J.C., Baxter, P.J., Detwiler, K.R. and Christian, G.D. (1995) Onlinespectrophotometric determination of phosphate in bioprocesses by sequential injection. Analyst, 120, 1583-1587
9. van Staden, J.F. and Taljaard, R.E. (1997) Online dilution with sequential injection analysis: a system for monitoring sulfate in industrial effluents. Fresenius' Journal of Analytical Chemistry, 357, 577-581.
10. Giné, M.F., Bergamin Filho, H. and Zagatto, E.A.G. (1980) Simultaneous determination of nitrate and nitrite by flow injection analysis. Analytica Chimica Acta, 114, 191-197.
11. Krug, F.J., Bergamin Filho, H. and Zagatto, E.A.G. (1986) Commutation in flow injection analysis. Analytica Chimica Acta, 179, 103-118.
12. Reis, B.F., Giné, M.F., Zagatto, E.A.G., Lima, J.L.F.C. and Lapa, R.A.S. (1994) Multicommutation in flow analysis. 1. Binary sampling: concepts, instrumentation and spectrophotometric determination of iron in plant digests. Analytica Chimica Acta, 293, 129-138.
13. Reis, B.F., Morales-Rubio, A. and de la Guardia, M. (1999) Environmentally friendly analytical chemistry through automation: comparative study of strategies for carbaryl determination with p-aminophenol. Analytica Chimica Acta, 392, 265-272.
14. Zagatto, E.A.G., Reis, B.F., Oliveira, C.C., Sartini, R.P. and Arruda, M.A.Z. (1999) Evolution of the commutation concept associated with the development of flow analysis. Analytica Chimica Acta, 400, 249-256.
15. Christian, G.D. and Ruzicka, J. (1992) Exploiting stopped-flow injection methods for quantitative chemical analysis. Analytica Chimica Acta, 261, 11-21.
16. Ruzicka, J. and Hansen, E.H. (1988) Flow Injection Analysis, Wiley, New York.
17. Honorato, R.S., Araujo, M.C.U., Lima, R.A.C., Zagatto, E.A.G., Lapa, R.A.S. and Costa Lima, J.L.F. (1999) A flow-batch titrator exploiting a one-dimensional optimisation algorithm for end point search. Analytica Chimica Acta, 396, 91-97.
18. Probstein, R.F. (1994) Physicochemical Hydrodynamics: An Introduction, John Wiley & Sons, New York.
19. Atkins, P.W. (1978) Cap 26, 27 and Appendix Vol, Addison-Wesley Iberoamericana, New York.
20. Brooks, S.H., Leff, D.V., Torres, M.H. and Dorsey, J.G. (1988) Dispersion coefficient and moment analysis of flow injection analysis peaks. Analytical Chemistry, 60, 2737-2744.
21. Betteridge, D. and Ruzicka, J. (1976) Determination of glycerol in water by flow injection analysis-a novel way of measuring viscosity. Talanta, 23, 409-410.
22. Pungor, E., Feher, Z., Nagy, G., Toth, K., Horvai, G. and Gratzl, M. (1979) Injection techniques in dynamic flow-through analysis with electrothermal analysis sensors. Analytica Chimica Acta, 109, 1.
23. Streeter, V.L. and Wylie, E.G. (1981) Mecánica de Fluídos, McGraw-Hill, Bogot.
24. Taylor, G. (1953) Dispersion of soluble matter in solvent flowing through a tube. Proceedings of the Royal Society of London, Series A, 219, 186-203.
25. Taylor, G. (1954) Conditions under which dispersion of a solute in a stream of solvent can be used to measure molecular difusion. Proceedings of the Royal Society of London, Series A, 225, 473-477.
26. Levenspiel, O. (1962) Chemical Reaction Engineering, Wiley, New York.
27. Ruzicka, J. and Hansen, E.H. (1978) Flow injection analysis. Part X. Theory, Techniques and Trends. Analytica Chimica Acta, 99, 37-76.
28. Painton, C.C. and Mottola, H.A. (1984) Kinetics in continuous flow sample processing. Analytica Chimica Acta, 158, 67.
29. Painton, C.C. and Mottola, H.A. (1983) Dispersion in continuous-flow sample processing. Analytica Chimica Acta, 154, 1-16.
30. Ananthakrishnan, V., Gill, W.N. and Barduhn, A.J. (1965) Laminar dispersion in capillaries. 1. Mathematical analysis. American Institute of Chemical Engineers Journal, 11, 1063.
31. Li, Y.S. and Gao, X.F. (1996) Two new parameters: Axial dispersion degree and radial dispersion intensity of sample zone injected in flow injection analysis systems. Laboratory Robotics and Automation, 8, 351.
32. Johnson, B.F., Malick, R.E. and Dorsey, J.G. (1992) Reduction of injection variance in flow injection analyisis. Talanta, 39, 35-44.
33. Brooks, S.H. and Rullo, G. (1990) Minimal dispersion flow injection analysis systems for automated sample introduction. Analytical Chemistry, 62, 2059-2062.
34. Spence, D.M. and Crouch, S.R. (1997) Factors affecting zone variance in a capillary flow injection system. Analytical Chemistry, 69, 165-169.
35. Levenspiel, O., Lai, B.W. and Chatlynne, C.Y. (1970) Tracer curves and residence time distribution. Chemical Engineering Science, 25, 1611-1613.
36. Levenspiel, O. and Turner, J.C.R. (1970) The interpretation of residence-time experiments. Chemical Engineering Science, 25, 1605-1609.
37. Snyder, L.R. (1980) Continuous-flow analysis: present and future. Analytica Chimica Acta, 114, 3-18.
38. Foley, J.P. and Dorsey, J.G. (1983) Equations for calculation of chromatographic figures of merit for ideal and skewed peaks. Analytical Chemistry, 55, 730-737.
39. Betteridge, D., Cheng,W.C., Dagless, E.L., David, P., Goad, T.B., Deans, D.R., Newton, D.A. and Pierce, T.B. (1983) An automated viscometer based on highprecision flow injection analysis. 2. Measurement of viscosity and diffusioncoefficients. Analyst, 108, 17.
40. Stone, D.C. and Tyson, J.F. (1986) Flow cell and diffusion-coefficient effects in flow injection analysis. Analytica Chimica Acta, 179, 427
41. van Staden, J.F. (1990) Effect of coated open-tubular inorganic-based solid-state ion-selective electrodes on dispersion in flow injection. Analyst, 115, 581-585
42. van Staden, J.F. (1992) Response-time phenomena of coated open-tubular solidstate silver-halide selective electrodes and their influence on sample dispersion in flow injection analysis. Analytica Chimica Acta, 261, 381.
43. Vanderslice, J.T., Rosenfeld, A.G. and Beecher, G.R. (1986) Laminar-flow bolus shapes in flow injection analysis. Analytica Chimica Acta, 179, 119-129.
44. Ruzicka, J., Hansen, E.H. and Zagatto, E.A. (1977) Flow injection analysis. 7. Use of ion-selective electrodes for rapid analysis of soil extracts and blood serum. Determination of potassium, sodium and nitrate. Analytica Chimica Acta, 88, 1-16.
45. Korenaga, T. (1992) Aspects of sample dispersion for optimizing flow injection analysis systems. Analytica Chimica Acta, 261, 539.
46. Narusawa, Y. and Miyamae, Y. (1994) Zone circulating flow injection analysis: theory. Analytica Chimica Acta, 289, 355-364.
47. Narusawa, Y. and Miyamae, Y. (1994) Radial dispersion by computer-aided simulation with data from zone circulating flow injection analysis. Analytica Chimica Acta, 296, 129-140.
48. Narusawa, Y. and Miyamae, Y. (1995) Evidence of axial diffusion accompanied by axial dispersion with zone circulating flow injection analysis data. Analytica Chimica Acta, 309, 227-239.
49. Narusawa, Y. and Miyamae, Y. (1998) Decisive problems of zone-circulating flow injection analysis and its solution. Talanta, 45, 519.
50. Vanderslice, J.T., Stewart, K.K., Rosenfeld, A.G. and Higgs, D.H. (1981) Laminar dispersion in flow injection analysis. Talanta, 28, 11-18.
51. Vanderslice, J.T., Beecher, G.R. and Rosenfeld, A.G. (1984) Dispersion and diffusion coefficients in flow injection analysis. Analytica Chimica Acta, 56, 292-293.
52. Gomez-Nieto, M.A., Luque de Castro, M.D., Martin, A. and Valcarcel, M. (1985) Prediction of the behavior of a single flow injection manifold. Talanta, 32, 319-324.
53. Kempster, P.L., van Vliet, H.R. and Staden, J.F. (1989) Prediction of FIApeak width for a flow injection manifold with spectrophotometric or ICP detection. Talanta, 36, 969.
54. Tijssen, R. (1980) Axial dispersion and flow phenomena in helically coiled tubular reactors for flow analysis and chromatography. Analytica Chimica Acta, 114, 71-89.
55. Reijn, J.M., van der Linden, W.E. and Poppe, H. (1981) Transport phenomena in flow injection analysis without chemical reaction. Analytica Chimica Acta, 126, 1.
56. Andrade, F.J., Iñón, F.A., Tudino, M.B. and Troccoli, O.E. (1999) Integrated conductimetric detection: mass distribution in a dynamic sample zone inside a flow injection manifold. Analytica Chimica Acta, 379, 99-106.
57. Iñón, F.A., Andrade, F.J. and Tudino, M.B. (2003) Mass distribution in a dynamic sample zone inside a flow injection manifold: modelling integrated conductimetric profiles. Analytica Chimica Acta, 477, 59-71.
58. Golay, M.J.E. and Atwood, J.G. (1979) Early phases of the dispersion of a sample injected in poiseuille flow. Journal of Chromatography, 186, 353-370.
59. Atwood, J.G. and Golay, M.J.E. (1981) Dispersion of peaks by short straight open tubes in liquid-chromatography systems. Journal of Chromatography, 218, 97-122.
60. Poppe, H. (1980) Characterization and design of liquid phase flow-through detector system. Analytica Chimica Acta, 114, 59-70.
61. Reijn, J.M., van der Linden, W.E. and Poppe, H. (1980) Sometheroretical aspects of flow injection analysis. Analytica Chimica Acta, 114, 105-118.
62. Valcárcel, M. and Luque de Castro, M.D. (1987) Flow injection analysis: Principles and Applications, Ellis Horwood, Chichester.
63. Coq, B., Cretier, G., Rocca, J.L. and Porthault, M. (1981) Open or packed sampling loops in liquid-chromatography. Journal of Chromatographic Science, 19, 12-112.
64. Kolev, S.D. (1995) Mathematical modelling of flow inject systems. Analytica Chimica Acta, 308, 36-66.
65. DeLon Hull, R., Malic, R.E. and Dorsey, J.G. (1992) Dispersion phenomena in flow injection systems. Analytica Chimica Acta, 267, 1-24.
66. Brooks, S.H. and Dorsey, J.G. (1990) Moment analysis for evaluation of flow injection manifolds. Analytica Chimica Acta, 229, 35.
67. Ramsing, A.U., Ruzicka, J. and Hansen, E.H. (1981) The principles and theory of high-speed titrations by flow injection analysis. Analytica Chimica Acta, 129, 1.
68. Reijn, J.M., Poppe, H. and van der Linden, W.E. (1984) Kinetics in a single bead string reactor for flow injection analysis. Analytical Chemistry, 56, 943-948.
69. Hartnett, M., Diamond, D. and Barker, P.G. (1993) Neural network-based recognition of flow injection patterns. Analyst, 118, 347-354.
70. Hungerford, J.M. and Christian, G.D. (1987) Chemical kinetics with reagent dispersion in single-line flow injection systems. Analytica Chimica Acta, 200, 1.
71. Tyson, J.F. and Idris, A.B. (1981) Flow injection sample introduction for atomic absorption spectrometry: Applications of a simplified model for dispersion. Analyst, 106, 1125.
72. Burguera, J.L. (1989) Flow Injection Atomic Spectroscopy, Marcel Dekker, New York.
73. Betteridge, D., Marczewski, C.Z. and Wade, A.P. (1984) A random walk simulation of flow injection analysis. Analytica Chimica Acta, 165, 227-236.
74. Crowe, C.D., Levin, H.W., Betteridge, D. and Wade, A.P. (1987) A random-walk simulation of flow injection sytems with merging zones. Analytica Chimica Acta, 194, 49.
75. Wentzell, P.D., Bowdridge, M.R., Taylor, E.L. and Macdonald, C. (1993) Random-walk simulation of flow injection analysis-evaluation of dispersion profiles. Analytica Chimica Acta, 278, 293-306.
76. Levine, I.N. (1988) Chapter 16, McGraw-Hill, Madrid.
77. Iñón, F.A. (2001) in Un nuevo enfoque en el estudio del proceso de dispersión en FIA: el método conductimétro integral (ICM) y modelado matemático de las curvas ICM Vol. Ph. D. Universidad de Buenos Aires, Buenos Aires, p. 464.
78. Reijn, J.M., Poppe, H. and van der Linden, W.E. (1983) A possible approach to the optimization of flow injection analysis. Analytica Chimica Acta, 145, 59.
79. Betteridge, D. (1978) Flow injection analysis. Analytical Chemistry, 50, 832A-846.
80. Andrade, F.J. (2001) in Estudio de dispersión en sistemas de análisis por inyección en flujos (FIA) y su aplicación al análisis de vestigios Vol. Ph. D. Universidad de Buenos Aires, Buenos Aires, p. 381.
81. Leclerc, D.F., Bloxham, P.A. and Toren, E.C.J. (1986) Axial dispersion in coiled tubular reactors. Analytica Chimica Acta, 184, 173.
82. Li, Y.H. and Ma, H.C. (1995) Two trends of sample dispersion variation with carrier flow rate in a single flow injection manifold. Talanta, 42, 2033.
83. Stone, D.C. and Tyson, J.F. (1987) Models for dispersion in flow injection analysis. 1. basic requirements and study of factors affecting dispersion. Analyst, 112, 515-521.
84. Fang, Z. (1995) Flow Injection Atomic Absorption Spectrometry, John Wiley & Son Ltd, New York.
85. Reijn, J.M., van der Linden, W.E. and Poppe, H. (1980) Dispersion phenomena in reactors for flow analysis. Analytica Chimica Acta, 114, 91-104.