Fibre-reinforced concrete in fib Model Code 2010: Principles, models and test validation

Structural Concrete

Volumn 14, Issue 4, 2013, Pages 342-361

  Di Prisco, Marco ^a   Colombo, Matteo ^a   Dozio, Daniele ^b  

^a POLITECNICO DI MILANO   (Italy)

^b Arup Italia srl   (Italy)

Author keywords

constitutive equations; fibre reinforced concrete; identification; modelling; redundancy; structural behaviour; structural characteristic length; structural design

Indexed keywords

CODES (SYMBOLS); CONSTITUTIVE EQUATIONS; CONSTITUTIVE MODELS; CRACKS; FIBER REINFORCED MATERIALS; FIBERS; FINITE ELEMENT METHOD; IDENTIFICATION (CONTROL SYSTEMS); MODELS; REDUNDANCY; REINFORCED CONCRETE; THIN WALLED STRUCTURES;

FIBRE REINFORCED CONCRETE; INTERNATIONAL BUILDING CODE; MATERIAL CLASSIFICATION; PERFORMANCE BASED; STRUCTURAL APPLICATIONS; STRUCTURAL BEHAVIOUR; STRUCTURAL CHARACTERISTICS; THIN-WALLED ELEMENTS;

STRUCTURAL DESIGN;

EID: 84889663046     PISSN: 14644177     EISSN: 17517648     Source Type: Journal    
DOI: 10.1002/suco.201300021     Document Type: Article

References (69)

1. Reinhardt, H. W., Naaman, A. E. (eds.): High Performance Fiber Reinforced Cement Composites-HPFRCC 3. RILEM Proc. PRO6. RILEM Publications S.A.R.L., Cachan, France, 1999.
2. Naaman, A. E., Reinhardt, H. W. (eds.): High performance Fiber Reinforced Cement Composites-HPFRCC4, RILEM Proc. PRO30, RILEM Publications S.A.R.L., Bagneaux, France, 2003.
3. Reinhardt, H. W., Naaman, A. E. (eds.): High Performance Fiber Cement Composites-HPFRCC5, PRO53, RILEM Publications S.A.R.L., 2007.
4. Parra-Montesinos, G. J., Reinhardt, H. W., Naaman, A. E.: High Performance Fiber Reinforced Cement Composites 6, RILEM book series, vol. 2, 2012.
5. Rossi, P., Chanvillard, G. (eds.): 5th RILEM Symp. on Fiber Reinforced Concretes. BEFIB 2000, RILEM Proc. PRO15, RILEM Publications S.A.R.L., Cachan, France, 2000.
6. di Prisco, M., Felicetti, R., Plizzari, G. (eds.): Fiber-Reinforced Concrete. BEFIB RILEM Proc. PRO39, RILEM Publications S.A.R.L. Bagneux, France, 2004.
7. Gettu, R. (ed.): Fibre Reinforced Concrete: Design and Applications. BEFIB 2008, RILEM Proc. PRO60, RILEM Publications S.A.R.L., Bagneux, France, 2008.
8. Barros, J. A. O.: Fibre Reinforced Concrete-Challenges and Opportunities. BEFIB 2012, RILEM International Symp., Proc., Guimarães, Portugal, 2012.
9. di Prisco, M. (ed.), FRC structural applications and standards. Materials and Structures, special issue (2009) 429, 1169-1311.
10. Romualdi, J. P., Batson, G. B.: Mechanics of Crack Arrest in Concrete. Proc., ASCE, vol. 89, EM3, 1963, pp. 147-168.
11. Romualdi, J. P., Mandel, J. A., Tensile Strength of Concrete Affected by Uniformly Distributed Closely Spaced Short Lengths of Wire Reinforcement. ACI Journal, Proc. (1964) 616, 657-671.
12. Shah, S. P., Rangan, B. V., Effects of reinforcements on ductility of concrete. ASCE Journal of the Structural Division (1970) 96, ST6, 1167-1184.
13. Shah, S. P., Rangan, B. V., Ductility of Concrete Reinforced with Stirrups, Fibers and Compression Reinforcement. Journal, Structural Division, ASCE (1970) 96, ST6, 1167-1184.
14. Shah, S. P., Rangan, B. V., Fiber Reinforced Concrete Properties. ACI Journal, Proc. (1971) 682, 126-135.
15. Johnston, C. D.: Steel Fibre Reinforced Mortar and Concrete-A Review of Mechanical Properties. Fiber Reinforced Concrete, SP-44, ACI, Detroit, 1974, pp. 127-142.
16. Naaman, A. E., Shah, S. P.: Bond Studies of Oriented and Aligned Fibers. Proc., RILEM Symposium on Fiber Reinforced Concrete, London, 1975, pp. 171-178.
17. Naaman, A. E., Shah, S. P., Pullout Mechanism in Steel Fiber Reinforced Concrete. ASCE Journal, Structural Division (1976) 102, ST8, 1537-1548.
18. Shah, S. P., Naaman, A. E., Mechanical Properties of Steel and Glass Fiber Reinforced Concrete. ACI Journal, Proc. (1976) 73, 1, 50-53.
19. Patent Nos. 3, 429, 094 (1969) & 3, 500, 728 (1970), Battelle Memorial Institute, Columbus, Ohio; Patent No. 3, 650, 785 (1972), U.S. Steel Corporation, Pittsburgh, Pennsylvania, United States Patent Office, Washington, D.C.
20. ACI Committee 544: Design considerations for steel Fiber Reinforced Concrete, ACI 544.4R-88. American Concrete Institute, ACI Farmington Hills, MI, 1996.
21. ACI Committee 318: Building code and commentary, Report ACI 318-08/318R-08. American Concrete Institute, Farmington Hills, MI, 2008.
22. Vandewalle, L. et al.: Recommendation of Rilem TC162-TDF, 2002. Test and design methods for steel fibre reinforced concrete: Design of steel fibre reinforced concrete using the s-w method: principles and applications. Materials and Structures, vol. 35, pp. 262-278.
23. Vandewalle, L. et al.: Recommendation of Rilem TC162-TDF, 2003. Test and design methods for steel fibre reinforced concrete: s-e-design method (final recommendation). Materials and Structures, vol. 36, pp. 560-567.
24. AFGC-SETRA: Ultra High Performance Fibre-Reinforced Concretes, Interim Recommendations, AFGC Publication, France, 2002.
25. Stälfiberbetong, rekommendationer för konstruction, utförande och provning Betongrapport n. 4-Svenska Betongföreningen, 1995.
26. Deutscher Ausschuss für Stahlbeton (DAfStb): Guidelines for steel fiber reinforced concrete-23rd draft-richtlinie Stahlfaserbeton-DIN 1045 annex, parts 1-4, 2007.
27. Richtlinie Faserbeton, Osterreichische Vereinigung für Beton- und Bautechnik, 2002.
28. CNR-DT 204, Guidelines for design, construction and production control of fiber reinforced concrete structures. National Research Council of Italy, 2006.
29. JSCE: Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks (HPFRCC), Rokugo, K. (ed.), Concrete Engng. Series, 82, 2008.
30. AENOR. UNE 83515. Hormigones con fibras. Determinciõn de la resistencia a fisuraciõn, tenacidad y resistencia residual a tracciõn. Metodo Barcelona. Asociaciõn Española de Normalizaciõn y Certificaciõn, Madrid, 2010.
31. Triantafillou, T., Matthys, S., Fibre Reinforced Polymer Reinforcement Enters fib Model Code 2010. Structural Concrete (2013) 14, doi: 10.1002/suco.201300016.
32. Walraven, J., fib Model Code for Concrete Structures 2010: mastering challenges and encountering new ones. Structural Concrete (2013) 14, 3-9, doi: 10.1002/suco.201200062.
33. Bigaj, A., Vrouwenvelder, T., Reliability in the performance-based concept of the fib Model Code 2010, Structural Concrete (2013) 14, doi: suco.201300053.
34. Ferrara, L., Ozyurt, N., di Prisco, M., High mechanical performance of fibre reinforced cementitious composites: the role of "casting flow-induced" fibre orientation. Materials and Structures (2011) 441, pp. 109-128.
35. UNI EN 206-1, 2006. Concrete-Part 1: Specification, performance, production and conformity.
36. Vandewalle, L., Cracking behaviour of concrete beams reinforced with a combination of ordinary reinforcement and steel fibers. Materials and Structures (2000) 33, 227, pp. 164-170.
37. Minelli, F., Tiberti, G., Plizzari, G., Crack control in RC elements with fiber reinforcement. American Concrete Institute, ACI (2011) 280 SP, pp. 76-93.
38. Leutbecher, T., Fehling, E.: Design for serviceability of ultra high performance concrete structures, RILEM book series, vol. 2, 2012, pp. 445-452.
39. Taerwe, L., Van Gysel, A., Influence of steel fibers on design stress-strain curve for high-strength concrete. Journal of Engineering Mechanics (1996) 1228, pp. 695-704.
40. Campione, G., Fossetti, M., Papia, M., Behavior of fiber-reinforced concrete columns under axially and eccentrically compressive loads. ACI Structural Journal (2010) 107, 3, pp. 272-281.
41. Bencardino, F., Rizzuti, L., Spadea, G., Swamy, R. N., Stress-strain behavior of steel fiber-reinforced concrete in compression. Journal of Materials in Civil Engineering (2008) 20, 3, pp. 255-263.
42. di Prisco, M., Colombo, M.: FRC thin-walled structures: opportunities and threats, Fibre Reinforced Concrete-Challenges and Opportunities. BEFIB 2012, RILEM International Symp., Proc., Guimarães, Portugal, 2012.
43. EN 14651, 2004: Test method for metallic fiber concrete-Measuring the flexural tensile strength (limit of proportionality, residual).
44. Hillerborg, A., Modeer, M., Peterson, P. E., Analysis of crack formation and crack growth by means of fracture mechanics and finite elements. Cement and Concrete Research (1976) 6, pp. 773-782.
45. Bazant, Z. P., Cedolin, L., Finite element modeling of crack band propagation. Journal of Structural Engineering (1983) 1091, pp. 69-92.
46. Ferrara, L., di Prisco, M., Mode I fracture behavior in concrete: non-local damage modelling. ASCE, Journal of Engineering Mechanics (2001) 1277, pp. 678-692.
47. di Prisco, M., Felicetti, R., Gambarova, P. G.: On the evaluation of the characteristic length in high strength concrete. High Strength Concrete, Azizinamini, A., Darwin, D., French, C. (eds.), ASCE, 1999, pp. 377-390.
48. Hillerborg, A., Analysis of fracture by means of the fictitious crack model, particularly for fibre reinforced concrete. Int. J. Cem. Comp. (1980) 24, pp. 177-184.
49. Barr, B. I. G., Lee, M. K., De Place Hansen, E. J., Dupont, D., Erdem, E., Schaerlaekens, S., Schnütgen, B., Stang, H., Vandewalle, L.: Round-robin analysis of the RILEM TC 162-TDF beam-bending test: Part 1-Test method evaluation, 2003.
50. Taylor, M., Lydon, F. D., Barr, B. I. G., Toughness measurements on steel fibre-reinforced high strength concrete. Cement and Concrete Composites (1997) 194, pp. 329-340.
51. Ferrara, L., di Prisco, M.: Three- vs. four-point bending test for the characterization of plain concrete: a numerical investigation, studies and research. Graduate School in Concrete Structures, Politecnico di Milano, Italy, 22, 2001, pp. 73-119.
52. UNI 11039, 2003. Concrete reinforced with steel fibres. Part II: test method for the determination of first cracking strength and ductility indexes.
53. di Prisco, M., Felicetti, R., Iorio, F., Gettu, R.: On the identification of SFRC tensile constitutive behaviour; in: Fracture mechanics of Concrete structures, de Borst, R., Mazars, J., Pijaudier-Cabot, G., van Mier, J. G. M. (eds.), vol. 1, A. A. Balkema Publishers, 2001, pp. 541-548.
54. Dozio, D.: SFRC structures: identification of the uniaxial tension characteristic constitutive law. PhD thesis, Dept. of Structural Engineering, Politecnico di Milano, Starrylink (ed.), 2008, ISBN 978-88-96225-14-1.
55. Colombo, M., di Prisco, M., Felicetti, R., Mechanical properties of Steel Fibre Reinforced Concrete exposed at high temperatures. Materials and Structures (2010) 434, pp. 475-491.
56. Rots, J. G.: Computational modelling of concrete fracture. PhD thesis, Delft University of Technology, 1988.
57. Löfgren, I., Stang, H., Olesen, J. F., Fracture properties of FRC determined through inverse analysis of wedge splitting and three-point bending tests. Journal of Advanced Concrete Technology (2005) 33, pp. 423-434.
58. di Prisco, M., Plizzari, G., Vandewalle, L., Fibre reinforced concrete: new design perspectives. Materials and Structures (2009) 429, pp. 1261-1281.
59. di Prisco, M., Felicetti, R., Iorio, F.: Il comportamento flessionale di elementi sottili in HPC; in: La meccanica della frattura nel calcestruzzo ad alte prestazioni, di Prisco, M., Plizzari, G. (eds.), Starrylink, Brescia, 2003, pp. 157-182.
60. di Prisco, M., Ferrara, L., Colombo, M., Mauri, M.: On the identification of SFRC constitutive law in uniaxial tension-in Fiber reinforced concrete, di Prisco, M. et al. (eds.), Proc. of 6th Rilem Symp. BEFIB 04, Varenna (Italy), PRO 39, Rilem Publications S.A.R.L., Bagneaux, France, 2004, pp. 827-836.
61. di Prisco, M., Felicetti, R., Lamperti M., Menotti, G.: On size effect in tension of SFRC thin plates; in: Fracture Mechanics of Concrete Structures, Li, V. C., Leung, C. K. Y., Willam, K. J., Billington, S. L. (eds.), 2, Schmick B. L., Pollington, A. D., USA, 2004, pp. 1075-1082.
62. UNI 11188, 2004. Design, Production and Control of Steel Fibre Reinforced Structural Elements. Italian Board of Standardization.
63. di Prisco, M., Dozio, D.: Post-tensioned SFRC beams in Fibre Reinforced Concrete: design and applications, Proc. of 7th Rilem Int. Conf. BEFIB 08, ISBN 978-2-35158-064-6, Rilem Publications S.A.R.L., Bagneux, France, PRO 60, 2008, pp. 899-910.
64. di Prisco, M., Dozio, D., Galli, A., Lapolla, S., Assessment and control of a SFRC retaining structure: Mechanical issues. European Journal of Environmental and Civil Engineering (2010) 14, 10, pp. 1259-1296.
65. di Prisco, M., Iorio, F., Plizzari, G.: HPSFRC prestressed roof elements; in: Test and design methods for steel fibre reinforced concrete-Background and experiences, Schnütgen, B., Vandewalle, L. (eds.), PRO 31, RILEM, 2003, pp. 161-188.
66. di Prisco, M., Dozio, D., Belletti, B.: On the fracture behaviour of thin-walled SFRC roof elements. Materials and Structures, 46(5), 2013, pp. 803-829.
67. Cervenka, V., Reliability-based non-linear analysis according to fib Model Code 2010. Structural Concrete (2013) 14, pp. 19-28, doi: 10.1002/suco.201200022.
68. Sigrist, V., Bentz, E., Fernández Ruiz, M., Foster, S., Muttoni, A., Background to the fib Model Code 2010 Shear Provisions-Part I: Beams and Slabs. Structural Concrete (2013) 14, doi: 10.1002/suco.201200066.
69. Muttoni, A., Fernández Ruiz, M., Bentz, E., Foster, S., Sigrist, V., Background to the fib Model Code 2010 Shear Provisions-Part II Punching Shear. Structural Concrete (2013) 14, doi: 10.1002/suco.201200064.