Numerical Methods for Phase-Change Problems

Handbook of Numerical Heat Transfer: Second Edition

Volumn , Issue , 2009, Pages 593-622

  Voller, V R ^a  

^a UNIVERSITY OF MINNESOTA   (United States)

Author keywords

Control volume equations; Direct microstructure (DMS) simulations; Liquid solid transition; Phase change problem; Thermal solutal coupling

Indexed keywords

EID: 84889612125     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470172599.ch19     Document Type: Chapter

References (76)

1. W. Kurz, and D. J. Fisher, Fundamentals of Solidification, Trans-Tech, Switzerland, 1986.
2. H. D. Brody andD. Apelian (eds.), Modeling of Casting and Welding Processes, TMS, Warrendale, PA, 1981.
3. J. A. Dantzig and J. T. Berry (eds.), Modeling of Casting and Welding Processes, II, TMS, Warrendale, PA, 1984.
4. S. Kou and R. Mehrabian (eds.), Modeling of Casting and Welding Processes, III, TMS, Warrendale, PA, 1986.
5. A. F. Giamei and G. J. Abbaschian (eds.), Modeling of Casting and Welding Processes, IV, TMS, Warrendale, PA, 1988.
6. M. Rappaz, M. R. Ozgu, and K. W. Mahin (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, V, TMS, Warrendale, PA, 1991.
7. T. S. Piwonka, V. R. Voller, and L. Katgerman (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, VI, TMS, Warrendale, PA, 1993.
8. M. Cross and J. Campbell (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, VII, TMS, Warrendale, PA, 1995.
9. B. G. Thomas and C Beckermann (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, VIII, TMS, Warrendale, PA, 1998.
10. P. R. Sahm, P. N. Hansen, and J. G. Conley (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, IX, Shaker Verlag, Aachen, 2000.
11. D. M. Stefanescu, J. A. Warren, M. R. Jolly, and M.J.M. Krane (eds.), Modeling of Casting, Welding and Advanced Solidification Processes, X, TMS, Warrendale, PA, 2003.
12. W. D. Bennon and F. P. Incropera, The Evolution of Macro-segregation in Statically Cast Binary Ingots, Metall. Trans. B, 18, 611-616 (1987).
13. C. Beckermann and R. Viskanta, Double-diffusive Convection During Dendritic Solidification of a Binary Mixture, Physico. Chem. Hydrodyn., 10, 195-213 (1988).
14. V. R. Voller, A. D. Brent, and C. Prakash, The Modelling of Heat, Mass and Solute Transport in Solidification Systems, Int. J. Heat Mass Transfer, 32, 1719-1731 (1989).
15. S. D. Felicelli, J. C. Heinrich, and D. R. Poirier, Simulation of Freckles During Vertical Solidification of Binary Alloys, Metall. Trans. B, 22, 847-859 (1991).
16. G. Amberg, Computation of Macrosegregation in an Iron-Carbon Casting, Int. J. Heat Mass Transfer, 34, 217-227 (1991).
17. M. C. Schneider and C. Beckermann, Formation of Macrosegregation by Multi-component Thermosolutal Convection During Solidification of Steel, Metall Trans. A, 26, 2373-2388 (1995).
18. M.J.M. Krane, F. P. Incropera, and D. R. Gaskell, Solidification of Ternary Metal Alloys, I: Model Development, Int. J. Heat Mass Transfer, 40, 3827-3835 (1997).
19. C. R. Swaminathan and V. R. Voller, Towards a General Numerical Scheme for Solidification Systems, Int. J. Heat Mass Transfer, 40, 2859-2868 (1997).
20. V. R. Voller, A Numerical Scheme for Solidification of an Alloy, Can. Met. Quart., 37, 168-177 (1998).
21. H. Kato and J. R. Cahoon, Inverse Segregation in Directionally Solidified Al-Cu-Ti Alloys with Equiaxed Grains, Metall. Trans. A, 16, 579-587 (1985).
22. Q. Z. Diao and H. L. Tsai Modeling of Solute Redistribution in the Mushy Zone During Solidification of Aluminum-Copper Alloys, Metall Trans. A, 24, 963-973 (1993).
23. V. R. Voller and S. Sundarraj, A Model of Inverse Segregation in a Binary Alloy: The Role of Microp-orosity, Int. J. Heat Mass Transfer, 38, 1009-1018 (1995).
24. S. Sundarraj and V. R. Voller, Computational Issues in Using a Dual-scale Model of the Segregation Process in a Binary Alloy, Int. J. Numer. Methods Heat Fluid Flow, 7, 181-199 (1987).
25. V. R. Voller, A Similarity Solution of the Solidification of Multi-component Alloys, Int. Heat Mass Transfer, 40, 2869-2877 (1997).
26. J. D. Chung, J. S. Lee, M. Choi, and H. Yoo, A Refined Similarity Solution for Multicomponent Alloy Solidification, Int. J. Heat Mass Transfer, 44, 2483-2492 (2001).
27. J. Ni and C. Beckermann, A Volume Averaged Two-phase Model for Transport Phenomena During Solidification, Metall. Trans. B, 22, 349-361 (1991).
28. C. Beckermann and C. Y. Wang, Multi-phase/-scale Modeling of Transport Phenomena in Alloy Solidification, Annu. Rev. Heat Transfer, 6, 115-198 (1995).
29. C. Beckermann, Macrosegregation, in K. H. Jiirgen Buschow et al. (eds.), Encyclopedia of Materilas: Science and Technology, pp. 4733-4739, Elsevier Science, New York, NY 2001.
30. C. Beckermann, Modeling of Macrosegregation: Applications and Future Needs, Int. Mater. Rev., 47, 243-261 (2002).
31. Th. U. Kaempfer and M. Rappaz, Modelling of Macrosegregation During Solidification Processes Using an Adaptive Domain Decomposition Method, Modelling Simul. Mater. Sci. Eng. 11, 575-597 (2003).
32. V. R. Voller, A. Mouchmov, and M. Cross, An Explicit Scheme for Coupling Temperature and Concentration Fields in Solidification Models, Appl. Math. Modelling, 28, 79-94 (2004).
33. H. D. Brody and M. C. Flemings, Solute Redistribution during Dendritic Solidification, Trans. Met. Soc. AIME, 236, 615-624 (1966).
34. T. W. Clyne and W. Kurz, Solute Redistribution during Solidification with Rapid Solid State Diffusion, Metall. Trans. A, 12, 965-971 (1981).
35. I. Ohnaka, Mathematical Analysis of Solute Redistribution During Solidification with Diffusion in Solid Phase, Trans. ISIJ, 26, 1045-1051 (1986).
36. C. Y. Wang and C. Beckermann, Unified Solute Diffusion Model for Columnar and Equiaxed Dendritic Alloy Solidification, Mater. Sci. Eng., 171, 199-211 (1993).
37. C. Y. Wang and C. Beckermann, A Multiphase Solute Diffusion Model for Dendritic Alloy Solidification, Metall. Trans. A, 1A, 2787-2802 (1993).
38. W. J. Boettinger, U. R. Kattner, and D. K. Banerjee, Analysis of Solidification Path and Micro-segregation in Multi-component Alloys, in B. G. Thomas and C. Beckermann (eds.), Modeling of Casting, Welding and Advanced Solidification Process VIII, pp. 159-170, TMS, Warrendale, PA, 1998.
39. V. R. Voller, A Semi-analytical Model of Micro-segregation in a Binary Alloy, J. Crystal Growth, 197, 325-332 (1999).
40. V. R. Voller, On a General Back-diffusion Parameter, J. Crystal Growth, 226, 562-568 (2001).
41. V. R. Voller, A Model of Microsegregation During Binary Alloy Solidification, Int. J. Heat Mass Transfer, 43, 2047-2052 (2000).
42. S. Kobayashi, Solute Redistribution During Solidification with Diffusion in Solid Phase: A Theoretical Analysis, J. Crystal Growth, 88, 87-96 (1988).
43. L. Nastac and D. M. Stefanescu, An Analytical Model for Solute Redistribution During Solidification of Planar, Columnar and Equiaxed Morphology, Metall. Trans A, 24, 2107-2119 (1993).
44. T. Himemiya and T. Umeda, Solute Redistribution Model of Dendritic Solidification Considering Diffusion in Both the Liquid and Solid Phases, Trans. ISIJ, 38, 730-735 (1998).
45. V. R. Voller and C. Beckermann, A Unified Model of Microsegregation and Coarsening, Metall. Trans. A, 30, 2183-2189 (1999).
46. A. Roosz, E. Haider, and H. E. Exner, Numerical Calculation of Microsegregation in Coarsened Dendritic Microstructures, Mater. Sci. Technol., 2, 1149-1155 (1986).
47. T. P Battle and R. D. Pehlke, Mathematical Modeling of Microsegregation in Binary Metallic Alloys, Metall. Trans. B, 21, 357-375 (1990).
48. V. R. Voller and S. Sundarraj, Modelling of Microsegregation, Mater. Sci. Technol., 9, 474-481 (1993).
49. J. A. Sarreal and G. J. Abbaschian, Effect of Solidification Rate on Microsegregation, Metall. Trans. A, 17, 2063-2073 (1986).
50. D. H. Kirkwood, A Simple Model for Dendrite Arm Coarsening During Solidification, Mater. Sci. Eng., 73, L1-L4 (1985).
51. M. Rappaz, Modeling of Microstructure Formation in Solidification Processes, Int. Mater. Rev., 34, 93-123 (1989).
52. G. Caginalp, Stefan and Hele-Shaw Type Models as Asymptotic Limits of the Phase-field Equations, Phys. Rev. A, 39, 5887-5896 (1989).
53. A. A. Wheeler, W. J. Boettinger, and G. B. Mcfadden, Phase-field Model for Isothermal Phase Transitions in Binary Alloys, Phys. Rev. A, 45, 7424-7439 (1992).
54. R. Kobayashi, Modeling and Numerical Simulations of Dendritic Crystal Growth, Physica D, 63, 410-423 (1993).
55. R. J. Braun, G. B. Mcfadden, and S. R. Coriell, Morphological Instability in Phase-field Models of Solidification, Phys. Rev. E, 49, 4336-4352 (1994).
56. J. A. Warren and W. J. Boettinger, Predictions of Dendritic Growth and Microsegregation Patterns in a Binary Alloy Using the Phase-field Method, Acta Metall. Mater., 43, 689-703 (1995).
57. W. J. Boettinger and J. A. Warren, The Phase-field Method: Simulation of Alloy Dendritic Solidification During Recalescence, Metall. Trans. A, 27, 657-669 (1996).
58. A. Karma and W.-J. Rappel, Phase-field Method for Computationally Efficient Modeling of Solidification with Arbitrary Interface Kinetics, Phys. Rev. E, 53, R3017-R3020 (1996).
59. A. Karma and W.-J. Rappel, Quantitative Phase-field Modeling of Dendritic Growth in Two and Three Dimensions, Phys. Rev. E, 57, 4323-4349 (1998).
60. R. F. Almgren, Second-order Phase Field Asymptotics for Unequal Conductivities, S1AM J. Appl. Math., 59, 2086-2107 (1999).
61. N. Provatas, N. Goldenfeld, and J. Dantzig, Efficient Computation of Dendritic Microstructures Using Adaptive Mesh Refinement, Phys. Rev. Lett, 80, 3308-3311 (1998).
62. N. Provatas, N. Goldenfeld, and J. Dantzig, Adaptive Mesh Refinement Computation of Solidification Microstructures Using Dynamic Data Structures, J. Comput. Phys., 148, 265-279 (1999).
63. C. Beckermann, H.-J. Diepers, I. Steinbach, A. Karma, and X. Tong, Modeling of Melt Convection in Phase-field Simulations of Solidification, J. Comput. Phys., 154, 468-496 (1999).
64. X. Tong, C. Beckermann, and A. Karma, Velocity and Shape Selection of Dendritic Crystals in a Forced Flow, Phys. Rev. E, 61, R49-R52 (2000).
65. W. J. Boettinger, J. A. Warren, C. Beckermann, and A. Karma, Phase-field Simulation of Solidification, Annu. Rev. Mater. Res., 32, 163-194 (2002).
66. J. M. Sullivan Jr., D. R. Lynch, and K. O'neill, Finite-element Simulation of Planar Instabilities During Solidification of an Undercooled Melt, J. Comput. Phys., 69, 81-111 (1987).
67. D. Juric and G. Tryggvason, A Front-tracking Method for Dendritic Solidification, J. Comput. Phys., 123, 127-148 (1996).
68. H. S. Udaykumar, R. Mittal, and W. Shyy, Computation of Solid-Liquid Phase Fronts in the Sharp Interface Limit on Fixed Grids, J. Comput. Phys., 153, 535-574 (1999).
69. H. S. Udaykumar, S. Marella, and S. Krishan, Sharp-interface Simulation of Dendritic Growth with Convection Benchmarks, Int. J. Heat Mass Transfer, 46, 2615-2627 (2003).
70. K. H. Tacke, Application of Finite Difference Enthalpy Methods to Dendritic Growth, in K. H. Hoffmann and J. Sprekels (eds.), Free Boundary Problems: Theory and Applications, Vol. II, pp. 636-642, Longman Sci. Tech., Essex, UK, 1990.
71. Y-T Kim, N. Goldenfeld, and J. Dantzig, Computations of Dendritic Microstmcture Using Level Set Method, Phys. Rev. E, 62, 2471-2474 (2000).
72. V. R. Voller and F. Porte-agel, Moore's Law and Numerical Modeling, J. Comput. Phys., 179, 698-703 (2002).
73. D. A. Drew, Mathematical Modeling of Two-phase Flow, Annu. Rev. Fluid Meek, 15, 261-291 (1983).
74. S. Whitaker, Flow in Porous Media, I: A Theoretical Derivation of Darcy's Law, Transport Porous Media, 1, 3-26 (1986).
75. S.G.R. Brown, J. A. Spittle, D. J. Jarvis, and R. Walden-bevan, Numerical Determination of Liquid Flow Permeability for Equiaxed Dendritic Structures, Acta Mater., 50, 1559-1569 (2002).
76. S. V. Patankar, Numerical Heat Transfer and Fluid Flow, Hemisphere, Washington, DC, 1980.