Modelling reinforced concrete beams under mixed shear-Tension failure with different continuous fe approaches

Computers and Concrete

Volumn 12, Issue 5, 2013, Pages 585-612

  Marzec, Ireneusz ^a   Skarzyński, Łukasz ^a   Bobiński, Jerzy ^a   Tejchman, Jacek ^a  

^a GDANSK UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Bond Slip; Characteristic length; Damage mechanics; Elasto Plasticity; Non Local theory; Reinforced concrete beam; Size effect; Smeared crack model; Strain localization

Indexed keywords

BOND SLIPS; CHARACTERISTIC LENGTH; DAMAGE MECHANICS; NONLOCAL THEORY; REINFORCED CONCRETE BEAMS; SIZE EFFECTS; SMEARED CRACK MODEL; STRAIN LOCALIZATIONS;

CONCRETE BEAMS AND GIRDERS; CONTINUUM MECHANICS; CRACKS; ELASTOPLASTICITY; REINFORCED CONCRETE; REINFORCEMENT;

CONCRETES;

EID: 84889242456     PISSN: 15988198     EISSN: None     Source Type: Journal    
DOI: 10.12989/cac.2013.12.5.585     Document Type: Article

References (58)

1. Abaqus (2004), Theory Manual, Version 5.8, Hibbit, Karlsson & Sorensen Inc.
2. Bažant, Z.P. and Bhat, P.D. (1976), "Endochronic theory of inelasticity and failure of oncrete", ASCE J. Eng. Mech., 102(4), 701-722.
3. Bažant, Z.P. and Ožbolt, J. (1990), "Non-local microplane model for fracture, damage nd size effect in structures", ASCE J. Eng. Mech., 116(11), 2485-2505.
4. Bažant, Z. and Planas, J. (1998), Fracture and Size Effect in Concrete and Other Quasi- rittle Materials, 609 CRC Press LLC.
5. Bažant, Z.P. and Jirásek, M. (2002), "Numerical integral formulations of plasticity and damage: survey of progress", ASCE J. Eng. Mech., 128(11), 1119-1149.
6. Bobiński, J. and Tejchman, J. (2004), "Numerical simulations of localization of deformation in quasibrittle materials within non-local softening plasticity", Comput. Concr., 1(4), 1-22.
7. Bobiński, J. and Tejchman, J. (2013), "A coupled continuous-discontinuous approach to concrete elements", Proceeding of the Int. Conf. Fracture Mechanics of Concrete and Concrete Structures FraMCoS-8, (Eds. van Mier, J.G.M., Ruiz, G., Andrade, C., Yu, R.C., Zhang, X.X.).
8. Brinkgreve, R.B.J. (1994), "Geomaterial models and numerical analysis of softening", Ph.D. Thesis, Delft University of Technology, Delft.
9. Carol, I. and Willam, K. (1996), "Spurious energy dissipation/generation in stiffness recovery models for elastic degradation and damage", Int. J. Solids Struct., 33(20-22), 2939-2957.
10. Cervenka, J. and Papanikolaou, V.K. (2008), "Three dimensional combined fracture-plastic material model for concrete", Int. J. Plasticity, 24(12), 2192-2220.
11. Committé Euro-International du Béton (1991), "CEB-FIP model code 1990: design code", Bulletin d'inform., 213-224.
12. de Borst, R. and Nauta, P. (1985), "Non-orthogonal cracks in a smeared finite element model", Eng. Comput., 2(1), 35-46.
13. de Borst, R. (1986), "Non-linear analysis of frictional materials", Ph.D. Thesis, University of Delft, Delft.
14. de Borst, R., Pamin, J. and Geers, M. (1999), "On coupled gradient-dependent plasticity and damage theories with a view to localization analysis", Eur. J. Mech. A/Solids, 18(6), 939-962.
15. de Vree, J.H.P., Brekelmans, W.A.M. and van Gils, M.A.J. (1995), "Comparison of non-local approaches in continuum damage mechanics", Comput. Struct., 55(4), 581-588.
16. den Uijl, J.A. and Bigaj, A. (1996), "A bond model for ribbed bars based on concrete confinement", Heron, 41(3), 201-226.
17. Dörr, K. (1980), "Ein Beitag zur Berechnung von Stahlbetonscheiben unter Berücksichtigung des Verbundverhaltens", Ph.D Thesis, Darmstadt University, Darmstadt, Germany.
18. Dragon, A. and Mróz, Z. (1979), "A continuum model for plastic-brittle behaviour of rock and concrete", Int. J. Eng. Sci., 17(2), 121-137.
19. Geers, M.G.D. (1997), "Experimental analysis and computational modeling of damage and fracture", Ph.D Thesis, Eindhoven University of Technology, Eindhoven, Netherland.
20. Gitman, I.M., Askes, H. and Sluys, L.J. (2008), "Coupled-volume multi-scale modelling of quasi-brittle material", Eur. J. Mech. A/Solids, 27(3), 302-327.
21. Haskett, M., Pehlers, D.J. and Mohamed Ali, M.S. (2008), "Local and global bond characteristics of steel reinforcing bars", Eng. Struct., 30(2), 376-383.
22. Häuler-Combe, U. and Pröchtel, P. (2005), "Ein dreiaxiale stoffgesetz fur betone mit normalen und hoher festigkeit", Beton- Stahlbetonbau, 100(1), 56-62.
23. Hordijk, D.A. (1991), "Local approach to fatigue of concrete", PhD Thesis, Delft University of Technology, Delft, Netherland.
24. Hsieh, S.S., Ting, E.C. and Chen, W.F. (1982), "Plasticity-fracture model for concrete", Int. J. Solids Struct., 18(3), 181-187.
25. Hughes, T.J.R. and Winget, J. (1980), "Finite rotation effects in numerical integration of rate constitutive equations arising in large deformation analysis", Int. J. Numer. Methods Eng., 15(12), 1862-1867.
26. Ibrahimbegovic, A., Markovic, D. and Gatuing, F. (2003), "Constitutive model of coupled damage-plasticity and its finite element implementation", Eur. J. Finite Elem., 12(4), 381-405.
27. Jirásek, M. and Zimmermann, T. (1998), "Analysis of rotating crack model", ASCE J. Eng. Mech., 124(8), 842-851.
28. Jirásek, M. (1999), "Comments on microplane theory", Mechanics of quasi-brittle materials and structures (Eds. Pijaudier-Cabot, G., Bittnar, Z. and Gerard, B.), Hermes Science Publications, 55-77.
29. Jirásek, M. and Marfia, S. (2005), "Non-local damage model based on displacement averaging", Int. J. Numer. Methods Eng., 63(1), 77-102.
30. Lee, J. and Fenves, G.L. (1998), "Plastic-damage model for cyclic loading of concrete structures", ASCE J. Eng. Mech., 124(8), 892-900.
31. Lorrain, M., Maurel, O. and Seffo, M. (1998), "Cracking behaviour of reinforced high-strength concrete tension ties", ACI Struct. J., 95(5), 626-635.
32. Majewski, T., Bobiński, J. and Tejchman, J. (2008), "FE-analysis of failure behaviour of reinforced concrete columns under eccentric compression", Eng. Struct., 30(2), 300-317.
33. Mahnken, R. and Kuhl, E. (1999), "Parameter identification of gradient enhanced damage models", Eur. J. Mech. A/Solids, 18(5), 819-835.
34. Marzec, I., Bobiński, J. and Tejchman, J. (2007), "Simulations of crack spacing in reinforced concrete beams using elastic-plasticity and damage with non-local softening", Comput. Concrete, 4(5), 377-403.
35. Marzec, I. and Tejchman, J. (2012), "Enhanced coupled elasto-plastic-damage models to describe concrete behaviour in cyclic laboratory tests: Comparison and improvement", Arch. Mech., 64(3), 227-259.
36. Mazars, J. (1986), "A description of micro- and macroscale damage of concrete structures", Eng. Fract. Mech., 25(5-6), 729-737.
37. Menetrey, P. and Willam, K.J. (1995), "Triaxial failure criterion for concrete and its generalization", ACI Struct. J., 92(3), 311-318.
38. Meschke, G. and Dumstorff, P. (2007), "Energy-based modeling of cohesive and cohesionless cracks via X-FEM", Comput. Meth. Appl. Mech. Eng., 196(21-24), 2338-2357.
39. Moonen, P., Carmeliet, J. and Sluys, L.J. (2008), "A continuous-discontinuous approach to simulate fracture processes", Philos. Mag., 88(28-29), 3281-3298.
40. Oliver, J. and Linero, D.L. and Huespe, A.E. and Manzoli, O.L. (2008), "Two-dimensional modeling of material failure in reinforced concrete by means of a continuum strong discontinuity approach", Comput. Meth. Appl. Mech. Eng., 197(5), 332-348.
41. Ooi, E.T. and Yang, Z.J. (2011), "Modelling crack propagation in reinforced concrete using a hybrid finite element-scaled boundary finite element method", Eng. Fract. Mech., 78(2), 252-273.
42. Pamin, J. and de Borst, R. (1999), "Stiffness degradation in gradient-dependent coupled damage-plasticity", Arch. Mech., 51(3-4), 419-446.
43. Peerlings, R.H.J., de Borst, R., Brekelmans, W.A.M. and Geers, M.G.D. (1998), "Gradient enhanced damage modelling of concrete fracture", Mech. Cohes.-Frict. Mat., 3(4), 323-342.
44. Pietruszczak, S., Jiang, J. and Mirza, F.A. (1988), "An elastoplastic constitutive model for concrete", Int. J. Solids Struct., 24(7), 705-722.
45. Pijaudier-Cabot, G. and Bažant, Z.P. (1987), "Nonlocal damage theory", ASCE J. Eng. Mech., 113(10), 1512-1533.
46. Rabczuk, T. and Zi, G. and Bordas, S. and Nguyen-Xuan, H. (2008), "A geometrically non-linear three-dimensional cohesive crack method for reinforced concrete structures", Eng. Fract. Mech., 75(16), 4740-4758.
47. Ragueneau, F., Borderie, Ch. and Mazars, J. (2000), "Damage model for concrete-like materials coupling cracking and friction", Int. J. Num. Anal. Meth. Geomech., 5(8), 607-625.
48. Rots, J.G. and Blaauwendraad, J. (1989), "Crack models for concrete, discrete or smeared? Fixed, multi-directional or rotating?", Heron, 34(1), 1-59.
49. Simo, K.C. and Ju, J.W. (1987), "Strain- and stress-based continuum damage models - I. Formulation", Int. J. Solids Struct., 23(7), 821-840.
50. Simone, A. and Sluys, L.J. (2004), "The use of displacement discontinuities in a rate-dependent medium", Comput. Meth. Appl. Mech. Eng., 193(27-29), 3015-3033.
51. Skarzyński, Ł. and Tejchman, J. (2010), "Calculations of fracture process zones on meso-scale in notched concrete beams subjected to three-point bending", Eur. J. Mech. A/Solids, 29(4), 746-760.
52. Skarzyński, L., Syroka, E. and Tejchman, J. (2011), "Measurements and calculations of the width of the fracture process zones on the surface of notched concrete beams", Strain, 47(s1), 319-332.
53. Sluys, L.J. and de Borst, R. (1994), "Dispersive properties of gradient and rate-dependent media", Mech. Mater., 18(2), 131-149.
54. Souza, R.A. (2010), Experimental and Numerical Analysis of Reinforced Concrete Corbels Strengthened with Fiber Reinforced Polymers, Computational Modelling of Concrete Structures, (Eds. N. Bicanic, R. de Borst, H. Mang, G. Meschke), Taylor and Francis Group, 711-718
55. Syroka, E., Bobinski, J. and Tejchman, J. (2011), "FE analysis of reinforced concrete corbels with enhanced continuum models", Finite Elem. Anal. Des., 47(9), 1066-1078
56. Syroka-Korol, E. (2012), "Experimental and theoretical investigations of size effects in concrete and reinforced concrete beams", PhD Thesis, Gdansk University of Technology, Gdansk, Poland.
57. Tejchman, J. and Bobinski, J. (2013), Continuous and Discontinuous Modeling of Fracture in Concrete Using FEM, Springer, (Eds. W. Wu and R. I. Borja), Berlin-Heidelberg, Germany.
58. Walraven, J. and Lehwalter, N. (1994), "Size effects in short beams loaded in shear", ACI Struct. J., 91(5), 585-593.