Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources

Construction and Building Materials

Volumn 51, Issue , 2014, Pages 424-431

  Yang, Xu ^a   You, Zhanping ^a   Dai, Qingli ^a   Mills Beale, Julian ^b  

^a Michigan Technological University   (United States)

^b CALIFORNIA BAPTIST UNIVERSITY   (United States)

Author keywords

Bio oil; Dynamic stiffness; Fatigue performance; Indirect tensile strength; Rutting performance; Statistical analysis

Indexed keywords

ASPHALT PAVEMENTS; BINDERS; BLENDING; FATIGUE OF MATERIALS; FATIGUE TESTING; GASOLINE; MIXTURES; STATISTICAL METHODS; STIFFNESS; TENSILE STRENGTH;

BIO OIL; DYNAMIC STIFFNESS; FATIGUE PERFORMANCE; INDIRECT TENSILE STRENGTH; RUTTING PERFORMANCE;

ASPHALT MIXTURES;

EID: 84889077093     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2013.11.017     Document Type: Article

References (55)

1. E. Chailleux, M. Audo, B. Bujoli, C. Queffelec, J. Legrand, and O. Lepine Trans Res E-Circ E-C165 2012 7 14
2. Fini EH, Kalberer EW, Shahbazi A, Biobinder from swine manure: sustainable alternative for asphalt binder. In: Transportation research board 90th annual meeting. Washington DC; 2011.
3. Mills-Beale J, You Z, Fini E, Zada B, Lee C, Yap Y, Aging influence on rheology properties of petroleum-based asphalt modified with bio-binder. J Mater Civil Eng 2012;26(2). http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000712.
4. M.A. Raouf, and R.C. Williams Rheology of fractionated cornstover bio-oil as a pavement material Int J Pavements 9 1-2-3 2010 58 69
5. Hill DR. Jennings AA, Bioasphalt from urban yard waste carbonization a student study. Case Western Reserve University; Ohio Department of Transportation; 2011.
6. Chaiya C. Production of bio oil from coffee residue using pyrolysis process in proceedings of the world congress on engineering and computer science. San Francisco, USA, 2011.
7. B.B. Uzun, E. Apaydin-Varol, F. Ateş, N. Özbay, and A.E. Pütün Synthetic fuel production from tea waste: characterisation of bio-oil and bio-char Fuel 89 1 2010 176 184
8. O. Onay, and O.M. Koçkar Pyrolysis of rapeseed in a free fall reactor for production of bio-oil Fuel 85 12-13 2006 1921 1928
9. S. Şensöz, and I. Kaynar Bio-oil production from soybean (Glycine max L.); fuel properties of Bio-oil Ind Crops Products 23 1 2005 99 105
10. Z. You, J. Mills-Beale, E. Fini, S. Goh, and B. Colbert Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and bioasphalt J Mater Civil Eng 23 11 2011 1569 1574
11. H. Asli, E. Ahmadinia, M. Zargar, and M.R. Karim Investigation on physical properties of waste cooking oil - Rejuvenated bitumen binder Constr Build Mater 37 2012 398 405
12. A. Sanna, S. Li, R. Linforth, K.A. Smart, and J.M. Andrésen Bio-oil and bio-char from low temperature pyrolysis of spent grains using activated alumina Bioresource Technol 102 22 2011 10695 10703
13. J.-L. Zheng, and Y.-P. Kong Spray combustion properties of fast pyrolysis bio-oil produced from rice husk Energy Conv Manage 51 1 2010 182 188
14. C. Wu, Q. Huang, M. Sui, Y. Yan, and F. Wang Hydrogen production via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system Fuel Process Technol 89 12 2008 1306 1316
15. C. Wu, and R. Liu Carbon deposition behavior in steam reforming of bio-oil model compound for hydrogen production Int J Hydrogen Energy 35 14 2010 7386 7398
16. E.P. Önal, B.B. Uzun, and A.E. Pütün Steam pyrolysis of an industrial waste for bio-oil production Fuel Process Technol 92 5 2011 879 885
17. A. Demirbaş Carbonization ranking of selected biomass for charcoal, liquid and gaseous products Energy Convers Manage 42 10 2001 1229 1238
18. H.B. Goyal, D. Seal, and R.C. Saxena Bio-fuels from thermochemical conversion of renewable resources: a review Renew Sustain Energy Rev 12 2 2008 504 517
19. T.R. Brown, M.M. Wright, and R.C. Brown Estimating profitability of two biochar production scenarios: slow pyrolysis vs fast pyrolysis Biofuels, Bioprod. Bioref. vol. 5 2010 Society of Chemical Industry and John Wiley & Sons Ltd. 54 68
20. U.S.D.O.E., Pyrolysis and other thermal processing energy efficiency and renewable energy program 2005. Biomass Program.
21. E. Fini, E. Kalberer, A. Shahbazi, M. Basti, Z. You, and H. Ozer Chemical characterization of biobinder from swine manure: sustainable modifier for asphalt binder J Mater Civil Eng 23 11 2011 1506 1513
22. S. Czernik, and A.V. Bridgwater Overview of applications of biomass fast pyrolysis oil Energy Fuels 18 2 2004 590 598
23. C.A. Mullen, and A.A. Boateng Chemical composition of bio-oils produced by fast pyrolysis of two energy crops† Energy Fuels 22 3 2008 2104 2109
24. M.A. Roaouf, M. Metwally, and R.C. Williams Development of non-petroleum based binders for use in flexible pavements 2010 Iowa State University, Ames Ames, IA
25. M. Ertaş, and M. HakkI Alma, pyrolysis of laurel (Laurus nobilis L.) extraction residues in a fixed-bed reactor: characterization of bio-oil and bio-char Journal of Analytical and Applied Pyrolysis 88 1 2010 22 29
26. Raouf MA, Williams RC, Determination of pre-treatment procedure required for developing bio-binders from bio-oils. In: Proceedings of the 2009 Mid-Continent Transportation Research Symposium. Ames, IA; 2009.
27. Onochie A, Fini E, Yang X, Mills-Beale J, You Z, Rheological characterization of nano-particle based bio-modified binder, In: Transportation research board 92nd annual meeting. Washington DC; 2013.
28. X. Yang, Z. You, and Q. Dai Performance evaluation of asphalt binder modified by bio-oil generated from waste wood resources Int J Pavement Res Technol 6 4 2013 431 439
29. A. Zofka, and I. Yut Investigation of rheology and aging properties of asphalt binder modified with waste coffee grounds Trans Res E-Circ E-C165 2012 61 72
30. Fini EH, Yang S-H, Xiu S, Characterization and application of manure-based bio-binder in asphalt industry, In: Transportation research board 89th annual meeting. Washington DC; 2010.
31. J. Peralta, R.C. Williams, M. Rover, and H.M.R.D. Silva Development of rubber-modified fractionated bio-oil for use as noncrude petroleum binder in flexible pavements Trans Res E-Circ 2012 23 36
32. Hill B, Oldham D, Behnia B, Fini EH, Buttlar WG, Reis H, Low-temperature performance characterization of bio-modified asphalt mixtures containing reclaimed asphalt pavement. In: Transportation research board 92nd annual meeting, Washington DC; 2013.
33. Michigan Department of Transportation. HMA Production Manual 2008.
34. NCHRP. Mechanistic-empirical design of new & rehabilitated pavement structures. Washington DC, 2011.
35. AASHTO. Standard method of test for determining the dynamic modulus and flow number for hot mix asphalt (HMA) using the asphalt mixture performance tester (AMPT). American Association of State and Highway Transportation Officials. 2010.
36. R. Chapuis, and A. Gatien Temperature dependent tensile strength of asphalt mixtures in relation to field cracking data 1995 American Society for Testing and Materials Philadelphia
37. Khosla NP, Harikrishnan KI, Tensile strength - a design and evaluation tool for superpave mixtures. Raleigh, NC: North Carolina State University; 2007.
38. AASHTO. Standard method of test for determining the rutting susceptibility of asphalt paving mixtures using the asphalt pavement analyzer (APA). AASHTO: American Association of State Highway and Transportation Officials; 2007.
39. Zhou F, Scullion T, Case study: preliminary field validation of simple performance tests for permanent deformation. In: Transportation research board for 2003 annual meeting. Washington, DC; 2003.
40. Witczak MW. Specification criteria for simple performance tests for rutting NCHRP report 580. National Cooperative Highway Research Program. 2007.
41. R. Dongre, J. D'Angelo, and A. Copeland Refinement of flow number as determined by asphalt mixture performance J Trans Res Rec 2 2127 2009 127 136
42. AASHTO. Standard method of test for determining the fatigue life of compacted hot-mix asphalt (HMA) subjected to repeated flexural bending. AASHTO: American Association of State Highway and Transportation Officials; 2007.
43. J. Bari, and M. Witczak New predictive models for viscosity and complex shear modulus of asphalt binders: for use with mechanistic-empirical pavement design guide Trans Res Rec: J Trans Res Board 2001 -1 2007 9 19
44. A. Javaid, T. Ryan, G. Berg, X. Pan, T. Vispute, and S.R. Bhatia Removal of char particles from fast pyrolysis bio-oil by microfiltration J Memb Sci 363 1-2 2010 120 127
45. Naske C, Speed J, Wynne Z, Crosby SE, Walters KB. Effects of char particles on the aging of bio-oil produced from timber biomass pyrolysis. In: 2009 AIChE Annual Meeting. Nastville, TN; 2009.
46. Shihadeh AL. Rural electrification from local resources: biomass pyrolysis oil combustion in a direct injection diesel engine, In: Dept. of Mech Eng. Massachusetts Institute of Technology; 1998.
47. â̂ -) and volume II: flow number and flow. Time; 2008.
48. Srinivasan G. Evaluation of indirect tensile strength to identify asphalt concrete rutting potential. In: Department of Civil and Environmental Engineering, Morgantown, West Virginia: West Virginia University; 2004.
49. Birgisson B, Roque R. The use of complex modulus to characterize the performance of asphalt mixtures and pavements in Florida. University of Florida; 2004.
50. Finn F, Saraf C, Kulkarni R, Nair K, Smith W, Abdullah A, The use of distress prediction subsystems in the design of pavement structures, In: Volume I of proceedings of 4th international conference on structural design of asphalt pavements. Ann Arbor, Michigan; 1977.
51. C.L. Monismith, J.A. Epps, and F.N. Finn Improved asphalt mix design J Assoc Asphalt Paving Technol 55 1985 347 406
52. G.M. Rowe Performance of asphalt mixtures in the trapezoidal fatigue test Proc Assoc Asphalt Paving Technol 62 1993 344 384
53. S.H. Carpenter, K.A. Ghuzlan, and S. Shen Fatigue endurance limit for highway and airport pavements Trans Res Rec: J Trans Res Board 1832 2003 131 138
54. S. Shen, and S.H. Carpenter Development of an Asphalt fatigue model based on energy principles J Assoc Asphalt Paving Technol 76 2007 525 574
55. SHRP A-404. Fatigue response of asphalt-aggregate mixes. Strategic Highway Research Program, National Research Council, Berkeley: Institute of Transportation Studies, University of California; 1994.