Identification of a dynamic model for shape memory alloy actuator using Hammerstein-Wiener gray box and mutable smart bee algorithm

International Journal of Intelligent Computing and Cybernetics

Volumn 6, Issue 4, 2013, Pages 328-357

  Fathi, Alireza ^a   Mozaffari, Ahmad ^b  

^a BABOL NOSHIRVANI UNIVERSITY OF TECHNOLOGY   (Iran)

^b UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Hysteresis modeling; Mutable smart bee algorithm; Shape memory alloy actuators; System identification

Indexed keywords

BEE ALGORITHM; COMPUTATIONALLY EFFICIENT; DESIGN/METHODOLOGY/APPROACH; EXPLORATION/EXPLOITATION; HYSTERESIS MODELING; META HEURISTIC ALGORITHM; NONLINEAR DYNAMIC BEHAVIORS; SHAPE MEMORY ALLOY ACTUATORS;

ALGORITHMS; COMPUTATIONAL EFFICIENCY; IDENTIFICATION (CONTROL SYSTEMS); MICROACTUATORS; SHAPE MEMORY EFFECT;

EXPERIMENTS;

EID: 84889073100     PISSN: 1756378X     EISSN: 17563798     Source Type: Journal    
DOI: 10.1108/IJICC-02-2013-0003     Document Type: Article

References (50)

1. Akay, B. and Karaboga, D. (2012), “A modified artificial bee colony algorithm for real-parameter optimization”, Information Sciences, Vol. 1, pp. 120–142.
2. Alashti, R.A., Gorji-Bandpy, M. and Mozaffari, A. (2012), “Vector mutable smart bee algorithm for engineering optimization”, International Journal of Computational Science and Engineering in press.
3. Arai, K., Aramaki, S. and Yanagisawa, K. (1994), “Continuous system modeling of shape memory alloy for control analysis”, Proceeding of 6th IEEE International Symposium on Micro Machine and Human Science, pp. 97–99.
4. Barforoushi, S.D., Fathi, A. and Danai, S. (2011), “Experimental model of shape memory alloy actuators using modified Prandtl-Ishlinskii model”, U.P.B. Science Bulletin, Series B, Vol. 73 No. 2, pp. 255–266.
5. Barzegari, M.M., Dardel, M., Fathi, A. and Ghadimi, M. (2012), “Aeroelastic characteristics of cantilever wing with embedded shape memory alloys”, Acta Astronautica, Vol. 79 No. 10, pp. 189–202.
6. Bashash, S., Jalili, N., Evans, P. and Dapin, J. (2009), “Recursive memory-based hysteresis modeling for solid-state smart actuators”, Journal of Intelligent Material Systems and Structures, Vol. 20 No. 18, pp. 2161–2172.
7. Bellini, A., Colli, M. and Dragoni, E. (2009), “Mechatronic design of a shape memory alloy actuator for automotive tumble flaps: a case study”, IEEE Transactions on Industrial Electronics, Vol. 56 No. 7, pp. 2644–2656.
8. Bernard, Y., Mendes, E. and Bouillault, F. (2002), “Dynamic hysteresis modeling based on the Preisach model”, IEEE Transactions on Magnetics, Vol. 38 No. 2, pp. 885–888.
9. Dumont, G. and Kuhl, C. (2005), “Finite element simulation for design optimization of shape memory alloy spring actuators”, Engineering Computation, Vol. 22 No. 7, pp. 835–848.
10. Elahinia, M.H. and Ahmadian, M. (2005a), “An enhanced SMA phenomenological model: the shortcomings of the existing models”, Smart Materials and Structures, Vol. 14 No. 6, pp. 1297–1308.
11. Elahinia, M.H. and Ahmadian, M. (2005b), “An enhanced SMA phenomenological model: II – the experimental study”, Smart Materials and Structures, Vol. 14 No. 6, pp. 1309–1319.
12. Eliades, T. (2007), “Orthodontic materials research and applications: part 2, current status and projected future developments in materials and biocompatibility”, American Journal of Orthodontics and Dentofacial Orthopedics, Vol. 131 No. 2, pp. 229–237.
13. Elman, J.L. (1993), “Learning and development in neural networks: the importance of starting small”, Cognition, Vol. 48 No. 1, pp. 71–99.
14. Fathi, A. and Mozaffari, A. (2012), “Vector optimization of laser solid freeform fabrication system using a hierarchical mutable smart bee-fuzzy inference system and hybrid NSGA-II/self organizing map”, Intelligent Manufacturing, December.
15. Fathi, A. and Mozaffari, A. (2013), “Modeling a shape memory alloy actuator using an evolvable recursive black-box and hybrid heuristic algorithms inspired based on the annual migration of salmons in nature”, Applied Soft Computing, 22 April.
16. Fathi, A., Khajepour, A., Toyserkani, E. and Durali, M. (2006), “Clad height control in laser solid freeform fabrication using a feedforward PID controller”, International Journal of Advance Manufacturing, Vol. 35 Nos 3/4, pp. 280–292.
17. Geis, M. and Middendorf, M. (2011), “Particle swarm optimization for finding RNA secondary structures”, International Journal of Intelligent Computing and Cybernetics, Vol. 4 No. 2, pp. 160–186.
18. Gorji-Bandpy, M., Mozaffari, A. and Mohammadrezaei, S. (2012), “Optimizing maximum power output and minimum entropy generation of Atkinson cycle using mutable smart bees algorithm”, International Journal of Computational Science and Engineering, Vol. 7 No. 2, pp. 108–120.
19. Goudarzi, A.M., Mozaffari, A., Samadian, P., Rezania, A. and Rosendahl, L. (2012), “Intelligent design of a waste heat recovery system for Damavand power plant using thermoelectric generator”, paper presented at 31st International and 10th European Conference on Thermoelectric, Aalborg, Denmark, 9-12 July.
20. Guo, W., Liu, D. and Wang, W. (2012), “Neural network hysteresis modeling with an improved Preisach model for piezoelectric actuators”, Engineering Computation, Vol. 29 No. 3, pp. 248–259.
21. Hughes, D. and Wen, J. (1995), “Preisach modeling of piezoceramic and shape memory alloy hysteresis”, Proceeding of 4th IEEE Conference on Control Applications, pp. 1086–1091.
22. Javadi, A.A., Faramarzi, A. and Farmani, R. (2012), “Design and optimization of microstructure of auxetic materials”, Engineering Computations, Vol. 29 No. 3, pp. 260–276.
23. Karaboga, D. and Basturk, B. (2008), “On the performance of artificial bee colony (ABC) algorithm”, Applied Soft Computing, Vol. 8 No. 1, pp. 687–697.
24. Khidir, E.A., Mohamed, N.A., Nor, M.J.M. and Mustafa, M.M. (2007), “A new concept of a linear smart actuator”, Sensor and Actuators A-PHYS, Vol. 135 No. 1, pp. 244–249.
25. Kuhnen, K. (2003), “Modeling, identification and compensation of complex hysteretic nonlinearities: a modified Prandtl-Ishlinskii approach”, European Journal of Control, Vol. 9 No. 4, pp. 407–418.
26. Lanteigne, E. and Jnifene, A. (2008), “An experimental study on a SMA driven pressurized hyper-redundant manipulator”, Journal of Intelligent Material Systems and Structures, Vol. 19 No. 9, pp. 1067–1075.
27. Liang, C. and Rogers, A. (1990), “One dimensional thermo mechanical constitutive relations for shape memory materials”, Journal of Intelligent Material Systems and Structures, Vol. 1 No. 2, pp. 207–234.
28. Majima, S., Kodama, K. and Hasegawa, T. (2001), “Modeling of shape memory alloy actuator and tracking control system with the model”, IEEE Transactions on Control Systems and Technology, Vol. 9 No. 1, pp. 54–59.
29. Mani, G., Feldman, M.D., Patel, D. and Agraval, C.M. (2007), “Coronary stents: a materials perspective”, Biomaterials, Vol. 28 No. 9, pp. 1689–1710.
30. Maximiano, M.S., Vega-Rodriguez, M.A., Gomez-Pulido, J.A. and Sanchez-Perez, J.M. (2012), “Multiobjective metaheuristics for frequency assignment problem in mobile networks with large-scale real-world instances”, Engineering Computation, Vol. 29 No. 2, pp. 144–172.
31. Mitavskiy, B., Rowe, J. and Cannings, C. (2012), ““A version of Geiringer-like theorem for decision making in the environments with randomness and incomplete information”, International Journal of Intelligent Computing and Cybernetics, Vol. 5 No. 1, pp. 36–90.
32. Mozaffari, A. and Fathi, A. (2012), “Identifying the behavior of laser solid freeform fabrication system using aggregated neural network and the great salmon run optimization algorithm”, International Journal of Bio-Inspired Computation, Vol. 4 No. 5, pp. 330–343.
33. Mozaffari, A., Gorji-Bandpy, M. and Gorji, T.B. (2012), “Optimal design of constraint engineering systems: application of mutable smart bee algorithm”, International Journal of Bio-Inspired Computation, Vol. 4 No. 3, pp. 167–180.
34. Mozaffari, A., Ramiar, A. and Fathi, A. (2013a), “Optimal design of classic Atkinson engine with dynamic specific heat using adaptive neuro-fuzzy inference system and mutable smart bee algorithm”, Swarm and Evolutionary Computation, Vol. 12, pp. 74–91.
35. Mozaffari, A., Fathi, A., Khajepour, A. and Toyserkani, E. (2013b), “Optimal design of laser solid freeform fabrication system and real time prediction of melt pool geometry using intelligent evolutionary algorithms”, Applied Soft Computing, Vol. 13 No. 3, pp. 1505–1519.
36. Mozaffari, A., Gorji-Bandpy, M., Samadian, P., Rastgar, R. and Rezania Kolaei, A. (2013c), “Comprehensive preference optimization of an irreversible thermal engine using Pareto based mutable smart bee algorithm and generalized regression neural network”, Swarm and Evolutionary Computation, Vol. 9 No. 1, pp. 90–103.
37. Nix, A. and Vose, M. (1992), “Modeling genetic algorithms with Markov chains”, Annals of Mathematics and Artificial Intelligence, Vol. 5 No. 1, pp. 79–88.
38. Poli, R., Kennedy, J. and Blackwell, T. (2007), “Particle swarm optimization: an overview”, International Journal of Intelligent Computing and Cybernetics, Vol. 1 No. 1, pp. 33–57.
39. Ray, K.S. (2012), “Pattern classification using fuzzy relation and genetic algorithm”, International Journal of Intelligent Computing and Cybernetics, Vol. 5 No. 4, pp. 533–565.
40. Reynaerts, D. and Brussel, H.V. (1998), “Design aspects of shape memory actuators”, Mechatronics, Vol. 8 No. 6, pp. 635–656.
41. Rogers, C.A. (1990), “Active vibration and structural acoustic control of shape memory alloy hybrid composites: experimental results”, Journal of Acoustical Society of America, Vol. 8 No. 6, pp. 2803–2811.
42. Saunders, W.R., Robertshow, H.H. and Rogers, C.A. (1990), “Experimental studies of structural acoustic control for a shape memory alloy composite beam”, Proceeding of the 31st Structures, Structural Dynamics and Materials Conference, AIAA, Vol. 90, pp. 2274–2282.
43. Sohn, J.W., Han, Y.M., Choi, S.B., Lee, Y.S. and Han, M.S. (2009), “Vibration and position tracking control of a flexible beam using SMA wire”, Journal of Vibration Control, Vol. 15 No. 2, pp. 263–272.
44. Spinella, I. and Dragoni, E. (2009), “Design equations for binary shape memory actuators under dissipative forces”, Journal of Mechanical Engineering Sciences, Vol. 223 No. 6, pp. 531–543.
45. Szewczyk, J., De Sars, V., Bidaud, P. and Dumont, G. (2001), “An active tubular polyarticulated micro-system for flexible endoscope”, in Rus, D. and Singh, S. (Eds), Lecture Notes in Control and Information Sciences, Vol. 271, Springer, New York, NY, pp. 179–188.
46. Webb, G.V. and Lagoudas, D. (1998), “Hysteresis modeling of SMA actuators for control applications”, Journal of Intelligent Material Systems and Structures, Vol. 9 No. 6, pp. 432–448.
47. Yang, F., Chen, Z. and Wei, C. (2013), “Nonlinear modeling and identification of small helicopter based on genetic algorithm”, International Journal of Intelligent Computing and Cybernetics, Vol. 6 No. 1, pp. 45–61.
48. Yang, X.S. (2008), Nature-Inspired Metaheuristic Algorithms, Luniver Press, Beckington.
49. Yang, X.S. and Gandomi, A.H. (2012), “Bat algorithm: a novel approach for global engineering optimization”, Engineering Computations, Vol. 29 No. 5, pp. 464–483.
50. Yu, J. and Duan, H. (2013), “Artificial bee colony approach to information granulation-based fuzzy radial basis function neural networks for image fusion”, Optik, Vol. 124, pp. 3103–3111.