3D roughness profile model in fused deposition modelling

Rapid Prototyping Journal

Volumn 19, Issue 4, 2013, Pages 240-252

  Boschetto, Alberto ^a   Giordano, Veronica ^a   Veniali, Francesco ^a  

^a SAPIENZA UNIVERSITY OF ROME   (Italy)

Author keywords

Electrodeposition; Fused deposition modelling; Modelling; Profile model; Surface roughness; Surface roughness measurement

Indexed keywords

DESIGN/METHODOLOGY/APPROACH; FUSED DEPOSITION MODELLING; MICROSCOPIC ANALYSIS; ROUGHNESS PARAMETERS; SURFACE CHARACTERIZATION; SURFACE-ROUGHNESS MEASUREMENTS; TECHNOLOGICAL ASPECTS; THEORETICAL MODELING;

DEPOSITION; ELECTRODEPOSITION; MODELS; PRODUCT DEVELOPMENT; PROFILOMETRY; SURFACE ROUGHNESS;

THREE DIMENSIONAL;

EID: 84887427030     PISSN: 13552546     EISSN: None     Source Type: Journal    
DOI: 10.1108/13552541311323254     Document Type: Article

References (24)

1. Ahn, D.K., Kim, H. and Lee, S. (2007), "Fabrication direction optimization to minimize post-machining in layered manufacturing", International Journal of Machine Tools & Manufacture, Vol. 47 Nos 3/4, pp. 593-606. (Pubitemid 44908887)
2. Ahn, D.K., Kim, H. and Lee, S. (2009a), "Surface roughness prediction using measured data and interpolation in layered manufacturing", Journal of Materials Processing Technology, Vol. 209 No. 2, pp. 664-671.
3. Ahn, D.K., Kweon, J.H., Kwon, S., Song, J. and Lee, S. (2009b), "Representation of surface roughness in fused deposition modelling", Journal of Materials Processing Technology, Vol. 209 Nos 15/16, pp. 5593-5600.
4. Armillotta, A. (2006), "Assessment of surface quality on textured FDM prototypes", Rapid Prototyping Journal, Vol. 12 No. 1, pp. 35-41. (Pubitemid 43164304)
5. Boschetto, A. and Bordoni, M. (2011), "Thickening of surfaces for direct additive manufacturing fabrication", Rapid Prototyping Journal, Vol. 18 No. 4, pp. 308-318.
6. Boschetto, A. and Veniali, F. (2010), "Intricate shape prototypes obtained by FDM", International Journal of Material Forming, Vol. 3 No. 1, pp. 1099-1102.
7. Boschetto, A., Giordano,V. and Veniali, F. (2011), "Roughness prediction in fused deposition modelling", Enhancing the Science of Manufacturing Proceedings of the X A.I.Te.M. Conference, Naples, Italy, A.I.Te.M. ed., pp. 183-187.
8. Campbell, R.I., Martorelli, M. and Lee, H.S. (2002), "Surface roughness visualization for rapid prototyping models", Computer-Aided Design, Vol. 34 No. 10, pp. 717-725. (Pubitemid 34544991)
9. Chua, C.K., Leong, K.F. and Lim, C.S. (2010), Rapid Prototyping: Principles and Applications, World Scientific, Rivewr Edge, NJ.
10. Cooper, K.G. (2001), Rapid Prototyping Technology - Selection and Application, Marcel Dekker, New York, NY.
11. Gadelmawla, E.S., Koura, M.M., Maksoud, T.M.A., Elewa, I.M. and Soliman, H.H. (2002), "Roughness parameters", Journal of Materials Processing Technology, Vol. 123 No. 1, pp. 133-145. (Pubitemid 34249719)
12. Galantucci, L.M., Lavecchia, F. and Percoco, G. (2009), "Experimental study aiming to enhance the surface finish of fused deposition modeled parts", CIRP Annals - Manufacturing Technology, Vol. 58 No. 1, pp. 189-192.
13. Gebhardt, A. (2003), Rapid Prototyping, Hanser, Munich.
14. ISO/DTS 16610-22 (2006), Geometrical product specifications (GPS) - filtration - linear profile filters: spline filters, pp. 1-6.
15. ISO 4287 (1997), Geometrical Product Specification (GPS) - Surface Texture: Profile Method - Terms, Definition and Surface Texture Parameters, International Organization for Standardization (ISO), Geneva.
16. Jin, Y., Zhang, J., Wang, Y. and Zhu, Z. (2009), "Filament geometrical model and nozzle trajectory analysis in the fused deposition modeling process", Journal of Zhejiang University - Science A, Vol. 10 No. 3, pp. 370-376.
17. Pandey, P.M., Reddy, N.V. and Dhande, S.G. (2003a), "Improvement of surface finish by staircase machining in fused deposition modeling", Journal of Materials Processing Technology, Vol. 1 Nos 1-3, pp. 323-331. (Pubitemid 35433598)
18. Pandey, P.M., Reddy, N.V. and Dhande, S.G. (2003b), "Real time adaptive slicing for fused deposition modelling", International Journal of Machine Tools&Manufacture, Vol. 43, No. 1, pp. 61-71. (Pubitemid 35385286)
19. Perez, C.J.L., Vivancos, J. and Sebastiàn, M.A. (2001), "Surface roughness analysis in layered forming processes", Precision Engineering, Vol. 25 No. 1, pp. 1-12. (Pubitemid 32092318)
20. Raja, V. and Fernandes, K.J. (2008), Reverse Engineering - An Industrial Perspective, Springer, London.
21. Reeves, P.E. and Cobb, R.C. (1995), "Surface deviation modelling of LTM processes - a comparative analysis", Proceedings of the Fifth European Conference on Rapid Prototyping and Manufacturing, University of Nottingham, Sutton Bonington, pp. 59-77.
22. Thrimurthulu, K., Pandey, P.M. and Reddy, N.V. (2004), "Optimum part deposition orientation in fused deposition modelling", International Journal of Machine Tools & Manufacture, Vol. 44 No. 6, pp. 585-594.
23. Vasudevarao, B., Natarajan, D.P. and Henderson, M. (2000), "Sensitivity of RP surface finish to process parameter variation", Proceedings of Solid Free Form Fabrication, Austin, TX, USA, pp. 252-258.
24. Wohlers, T. (2008), Wohlers Report 2008: Executive Summary, Wohlers Associates, Fort Collins, CO, pp. 12-15.