Fuel cell modelling and test: Experimental validation of model accuracy

International Conference on Power Engineering, Energy and Electrical Drives

Volumn , Issue , 2013, Pages 1795-1800

  Boscaino, V ^a   Miceli, R ^a   Capponi, G ^a   Casadei, D ^b  

^a UNIVERSITY OF PALERMO   (Italy)

^b UNIVERSITY OF BOLOGNA   (Italy)

Author keywords

Fuel cell; Modeling; Proton exchange membrane fuel cell; Renewable energy

Indexed keywords

ENERGY SAVING POLICIES; EXPERIMENTAL VALIDATIONS; FUEL CELL MODELLING; MATLAB /SIMULINK; MEASUREMENT-BASED; PARAMETERS IDENTIFICATION; RENEWABLE ENERGIES; RENEWABLE ENERGY SOURCE;

ELECTRIC POWER SYSTEMS; FUEL CELLS; MODELS; PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC); RENEWABLE ENERGY RESOURCES;

COMPUTER SIMULATION;

EID: 84887390178     PISSN: 21555516     EISSN: 21555532     Source Type: Conference Proceeding    
DOI: 10.1109/PowerEng.2013.6635890     Document Type: Conference Paper

References (44)

1. Di Tommaso A O, Genduso F, Miceli R (2012). Analytical Investigation and Control System Set-Up of Medium Scale PV Plants for Power Flow Management. ENERGIES, vol. 5(11), p. 4399-4416, ISSN: 1996-1073, doi: 10.3390/en5114399
2. Miceli R, Di Dio V, Rando C, La Cascia D. "A mathematical model to determine the electrical energy production in photovoltaic fields under mismatch effect". In: International Conference on Clean Electrical Power.(ICCEP 2011), Ischia, 14-16 June 2011, p. 46-51, Piscataway (NJ):IEEE, ISBN: 978-142442544-0, doi: 10.1109/ICCEP.2009.5212083.
3. Gritli Y, Di Tommaso A O, Filippetti F, Miceli R, Rossi C, Chatti C. "Investigation of Motor Current Signature and Vibration Analysis for Diagnosing Rotor Broken Bars in Double Cage Induction Motors". In: Proc. of the 2012 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.(SPEEDAM 2012) Sorrento (Italy), 20-22 Giugno 2012, p. 1360-1365, Piscataway (NJ):IEEE, ISBN: 978-1-4673-1301-8. DOI: 10.1109/SPEEDAM.2012.6264465
4. Di Tommaso A O, Miceli R, Ricco Galluzzo G. "Monitoring and Diagnosis of Failures in Squirrel-Cage Induction Motors Due to Cracked or Broken Bars". In: SDEMPED 2011-8th IEEE Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives. Bologna, Italia, 05/09/2011, p. 39-44, Piscataway (NJ):IEEE, ISBN: 978-1-4244-9302-9, doi: 10.1109/DEMPED.2011.6063599
5. Cecati C, Genduso F, Miceli R, Ricco Galluzzo G. "A suitable control technique for fault-tolerant converters in Distributed Generation". In: Proceedings-ISIE 2011: 2011 IEEE International Symposium on Industrial Electronics. Gdansk, Poland, 27-30 June 2011, p. 107-112, Piscataway (NJ):IEEE, ISBN: 978-142449312-8, doi: 10.1109/ISIE.2011.5984141
6. Di Tommaso AO, Favuzza S, Genduso F, Miceli R, Ricco Galluzzo G. "Development of Diagnostic Systems for the Fault Tolerant Operation of Micro-Grids". In: SPEEDAM 2010-International Symposium onPower Electronics, Electrical Drives,Automation and Motion. Pisa, Italy, June 14th-16th, 2010, p. 1645-1650, Piscataway (NJ):IEEE, ISBN: 978-1- 4244-7919-1, doi: 10.1109/SPEEDAM.2010.5542262
7. P. Bauer, D. Owsianik, "Integrated Computers Aided Design of a Flyback Converter", Journal of Power Electronics, 2002.
8. V. Boscaino, G. Capponi, G.M. Di Blasi, P. Livreri, F. Marino, "Modeling and simulation of a digital design approach for power supply systems", IEEE Workshops on Computers in Power Electronics (COMPEL 2006), pp. 246-249, Troy, 16-19 July 2006.
9. Di Tommaso A O, Genduso F, Miceli R, Ricco Galluzzo G. "Computer Aided Optimization Via Simulation Tools of Energy Generation Systems With Universal Small Wind Turbines". In: 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) 2012. Aalborg, Denmark, June 25-28 2012, p. 570-577, Piscataway (NJ):IEEE, ISBN: 978-1-4673-2022-1, doi: 10.1109/PEDG.2012.6254059
10. Lima L P, Farret F A, Ramos D B, Ferrigolo F Z, Stangarlin H W, Trapp J G, Serdotte A B."Psim mathematical tools to simulate PEM Fuel cells including the power converter". Proceedings of the IEEE 35thAnnual Conference of Industrial Electronics, IECON 2009,Page(s): 2784-2789.
11. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Linear-non- linear Digital Control for DC-DC Converters with Fast Transient Response", Int. Journ. of Power and Energy Sys., 2009, vol. 29, pp.38-47. DOI: 10.2316/Journal.203.2009.1.203-4021.
12. G.M. Di Blasi, V. Boscaino, P. Livreri, F. Marino, and M. Minieri, " A Novel Linear-Non-Linear Digital Control for DC/DC Converter with Fast Transient Response", Proceedings of the IEEE Applied Power Electronics Conference, APEC2006, USA 2006. Pp. 705-711. DOI: 10.1109/APEC.2006.1620616.
13. Di Tommaso A O, Genduso F, Miceli R, Ricco Galluzzo G. "Experimental Validation of a General Model for Three Phase Inverters Operating in Healthy and Faulty Modes". In: International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2012. Sorrento (Italy), 20-22/06/2012, p. 50-55, Piscataway (NJ):IEEE, DOI: 10.1109/SPEEDAM.2012. 6264571.
14. W. Chwei-Sen, O.H. Stielau, and G.A. Covic, "Load models and their application in the design of loosely coupled inductive power transfer systems," Power System Technology, 2000. Proceedings. PowerCon 2000. International Conference on, vol.2, no.1, pp.1053-1058.
15. A. Gebreselassie and J.H. Chow, "Investigation of the effects of load models and generator voltage regulators on voltage stability", Int. Journ. on Elec. Power En. Sys., vol. 16, no.2, pp. 83-89, Apr. 1994.
16. V. Boscaino, G. Capponi, P. Livreri, and F. Marino, " Measurementbased Load Modelling for Power Supply Systems Design" Proceedings of the IEEE Workshops on Computers in Power Electronics, COMPEL 2008, Zurich, 2008,pp. 1-4. Doi:10.1109/COMPEL.2008.4634672.
17. Genduso F, Miceli R. "A general mathematical model for non-redundant fault-tolerant inverters". In: International Electric Machines and Drives Conference, IEMDC 2011. Niagara Falls, CANADA, 15-18 Maggio 2011, p. 705-710, Piscataway (NJ):IEEE, ISBN: 978-145770061-3, doi: 10.1109/IEMDC.2011.5994897
18. U.K. Chakraborty, T.E. Abbott, S.K. Das, "PEM fuel cell modeling using differential evolution", Energy, An International Journal, Elsevier, 2012. Vol.40, Issue:1, Page(s):387-399.
19. Haji S, "Analytical modelling of PEM fuel cell I-V curve", Renewable Energy. Elsevier 2011. Vol.36, Issue:2, Page(s):451-458.
20. D. Bonanno, F. Genduso, R. Miceli, and C. Rando, "Main Fuel Cells mathematical models: Comparison and analysis in terms of free parameters," in Electrical Machines (ICEM), 2010 XIX International Conference on, 2010, pp. 1-6.DOI: 10.1109/ICELMACH.2010.5608225
21. V. Di Dio, D. La Cascia, R. Liga, and R. Miceli, "Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive," in Electrical Machines, 2008. ICEM 2008. 18th International Conference on, 2008, pp. 1-6.DOI: 10.1109/ICELMACH.2008.4800045.
22. Ramos-Paja C.A,Giral R, Martinez-Salamero L, Romano J,Romero A, Spagnuolo G. "A PEM Fuel-Cell Model Featuring Oxygen-Excess-Ratio Estimation and Power-Electronics Interaction". IEEE Transactions on Industrial Electronics, Vol. 57, No. 6, June 2010, Page(s):1914-1924.
23. V. Boscaino, G. Capponi, P. Livreri, and F. Marino, "Fuel Cell Modelling for Power Supply Systems Design". Proceedings of the IEEE International Workshop on Control and Modeling for Power Electronics, COMPEL'08, Zurich, 2008. pp.1-5. DOI:10.1109/COMPEL.2008.4634671.
24. V. Boscaino, G. Capponi, F. Marino, "FPGA implementation of a fuel cell emulator", Proceedings of the 20th IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion, IEEE SPEEDAM 2010, June 14-16, 2010, Pisa, Italy. ISBN: 978-1-4244- 4986-6. Page(s): 1297-1301.
25. L. Barelli, G. Bidini, F. Gallorini, A. Ottaviano, "Analysis of the operating conditions influence on PEM fuel cell performances by means of a novel semi-empirical model", International Journal of Hydrogen Energy, Elsevier, 2011. Vol.36, Issue:16, Page(s):10434-10442.
26. Xin Kong, Khambadkone A M."Modeling of a PEM Fuel-Cell Stack for Dynamic and Steady-State Operation Using ANN-Based Submodels". IEEE Transactions on Industrial Electronics, 2009, Vol. 56, Page(s): 4903-4914.
27. N. Sisworahardjo, T. Yalcinoz, M. Y. El-Sharkh, and M. Alam, "Neural network model of 100 W portable PEM fuel cell and experimental verification", International Journal of Hydrogen Energy, Elsevier, 2010. Vol. 35, Page(s): 9104-9109.
28. Kunusch C, Puleston P F, Mayosky M A, Moré J J. "Characterization and experimental results in PEM fuel cell electrical behaviour". international journal of hydrogen energy, Elsevier 2010, Vol. 3 5, Issue:11, Page(s): 5876-5881.
29. P. R. Pathapati, X. Xue, and J. Tang, "A new dynamic model for predicting transient phenomena in a pem fuel cell system," Renewable Energy, Elsevier, 2005. Vol. 30, Page(s): 1-22.
30. Liu, S.; Dougal, R.A. Design and Analysis of a Current-Mode Controlled Battery/Ultracapacitor Hybrid", in IEEE Int. Conf. on Ind. App., IAS'04, Oct. 2004, pp.1140-1145.
31. V. Boscaino, R. Collura, G. Capponi, and F. Marino, "A fuel cell-battery hybrid power supply for portable applications". Proceedings of the 20th IEEE International Symposium on Power Electronics, Electrical Drives, Automation and Motion, in Int. Symp. Power Electron. Elect. Drives Automation and Motion, SPEEDAM'10, Italy,2010,pp.580-585, DOI: 10.1109/SPEEDAM.2010. 5542091.
32. S. Liu and R.A. Dougal, "Power Enhancement of an Actively Controlled Battery/Ultracapacitor Hybrid" IEEE Trans. on Power Electron., vol. 20, no. 1, pp.236-243, Jan. 2005.
33. V. Boscaino, G. Capponi, and F. Marino, "Experimental test on a fuel cell-supercapacitor hybrid power supply for a digital still camera" Proceedings of the IEEE International Universities Power Engineering Conference, UPEC'09, Scotland, 2009, pp.1-5.
34. Di Tommaso A, Genduso F, Miceli R. "A Geometrical Simple Approach for Power Silicon Devices Fault Detection and Fault-Tolerant Operation of a Voltage Source Inverter|". In: 2012 XXth International Conference on Electrical Machines (ICEM 2012). p. 1524-1530, RED HOOK, NY 12571 USA:Curran Associates Inc., Marseille, France, 2-5 Sept. 2012, doi: 10.1109/ICElMach.2012. 6350081
35. Shih-JenCheng, Yu-KangLo, Huang-JenChiu, Shu-WeiKuo, "High- Efficiency Digital-Controlled Interleaved Power Converter for High-Power PEM Fuel-Cell Applications" IEEE Trans. on Industrial Electronics, vol. 60, no. 2, pp. 773-780, Feb 2013.
36. Wuhua Li, Lingli Fan, Yi Zhao, Xiangning He, Dewei Xu, Bin Wu, " High-Step-Up and High-Efficiency Fuel-Cell Power-Generation System With Active-Clamp Flyback-Forward Converter ,"IEEE Trans. on Industrial Electronics, vol. 59, no. 1, pp. 599-610, Jan 2012.
37. V. Boscaino and G. Capponi, "A High-Efficiency, Low-Cost Solution for On-Board Power Converters", Advances in Power Electronics, Hyndawi, vol. 2012, pp. 1-12. doi:10.1155/2012/259756, Sept. 2012.
38. A.K. Rathore, A.K.S. Bhat, R. Oruganti, " Analysis, Design and Experimental Results of Wide Range ZVS Active-Clamped L-L Type Current-Fed DC/DC Converter for Fuel Cells to Utility Interface ," IEEE Trans. on Industrial Electronics, vol. 59, no. 1, pp. 473-485, Jan 2012.
39. V. Boscaino, F. Pellitteri, R. La Rosa, and G. Capponi, "Wireless battery chargers for portable applications: design and test of a highefficiency power receiver", IET Power Electronics, vol.6, doi: 10.1049/iet-pel.2012. 0272, June 2013.
40. F. Pellitteri, V. Boscaino, R. La Rosa, and G. Capponi, "Improving the efficiency of a Standard Compliant Wireless Battery Charger", in IEEE International Universities Power Engineering Conference, UPEC 2012, UK, 2012, DOI: 10.1109/UPEC.2012.6398572, pp. 1-5.
41. V. Boscaino, F. Pellitteri, G. Capponi, and R. La Rosa, "A Wireless battery charger Architecture for Consumer Electronics", in IEEE International Conference on Consumer Electronics, ICCE 2012, Germany, 2012, pp.84-88. Doi: 10.1109/ICCE-Berlin.2012.6336483.
42. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Current-Sensing Technique for Current-Mode Controlled Voltage Regulator Modules". Microelectronics Journal, Elsevier, vol.39, no.12, pp.1852-1859, DOI: 10.1016/j.mejo.2008.05.015, Dec. 2008.
43. Jun-Young Lee, Yu-Seok Jeong, Byung-Moon Han, "An Isolated DC/DC Converter Using High-Frequency Unregulated Resonant Converter for Fuel Cell Applications, IEEE Trans. On Industrial Electronics, vol.58, no.7, pp.2926-2934, July 2011.
44. M. Nymand, M.A.E. Andersen, "High-Efficiency Isolated Boost DC- DC Converter for High-Power Low-Voltage Fuel-Cell Applications," IEEE Trans. on Industrial Electronics, vol. 57, no. 2, pp. 505-514, Feb 2010.