A review of the development of wind turbine generators across the world

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 4, Issue PARTS A AND B, 2012, Pages 1257-1265

  Goudarzi, N ^a   Zhu, W D ^a  

^a Baltimore County   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMMERCE; GAS TURBINES; TURBOGENERATORS; WIND POWER;

'CURRENT; DATA TREND; ENERGY; GENERATOR DESIGN; MARKET TRENDS; MAXIMUM POWER CAPTURE; OFFSHORE APPLICATIONS; POWER SOURCES; TECHNICAL DATA; WIND TURBINE GENERATORS;

WIND TURBINE GENERATORS;

EID: 84887265268     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2012-88615     Document Type: Conference Paper

References (67)

1. Solyani, D., and Redfern, M., 2009, "Have Wind Turbines Stop Manufacturing?, " IEEE.
2. Carlin, P.W., Laxson, A.S., and Muljadi, E.B., 2001, "The History and State of the Art of Variable-Speed Wind Turbine Technology, " National Renewable Energy Laboratory (NREL) Report.
3. Drachmann, A.G., 1961, "Heron's Windmill, " Centaurus, 7, pp.145-151.
4. BTM Consult ApS, 2005, "international wind energy development world market updates 2004 forcast 2005-2009".
5. BTM Consult ApS, 2006, "international wind energy development world market updates 2005 forcast 2007-2011".
6. BTM Consult ApS, 2008, "international wind energy development world market updates 2007 forcast 2008-2012".
7. Global Wind Energy Council, 2012, "Global Wind Statistics 2011".
8. Goudarzi, N., 2011, "Aerodynamic & Electromagnetic Modeling & Analysis of a Variable Torque Generator for Wind Turbine Applications, " Master Thesis, Department of Mechanical Engineering, University of Maryland Baltimore County.
9. World Wind Energy Association (WWEA), 2011, "World Wind Energy Report 2010".
10. Hansen, L.H., Helle, L., Blaabjerg, F., Ritchie, E., Munk- Nielsen, S., Binder, H., Sorensen, P., and Bak-Jensen, B., 2001, "Conceptual Survey of Generators and Power Electronics For Wind Turbines, " Riso-r-1205(EN), Riso National Laboratory, Roskilde.
11. Soens, J., 2005, "Impact of wind energy in a future power grid, " Ph. D dissertation, ISBN 90-5682-652-2, Wettelijk depot, UDC 621.548.
12. Polinder, H., Bang, D.J., and Chen, Z., 2007, "Concept Report on Generator Topologies, Mechnical and Electromagnetic Optimization, " Delft University of Technology and Aalborg University, Report Number: D 1B2.b.1.
13. Chen, Z., 2005, "Issues of Connecting Wind Farms into Power Systems, " Proceedings of IEEE/PES Transmission and Distribution Conference & Exhibition: Asia and Pacific.
14. Akhmatov, V., 2007, "Induction Generators for Wind Power, " Multi-Science Publishing Company, United Kingdom.
15. Henderson, D. S., 1996, "Synchronous or induction generators? - The choice for small scale generation, " International Conference on Opportunities and Advances in International Electric Power Generation, pp. 146-149.
16. Muller, H., Poller, M., Basteck, A., and Tilscher, M., Pfister, J., 2006, "Grid Compatibility of Variable Speed Wind Speed Turbines with Directly Coupled Synchronous Generator and Hydro-Dynamically Controlled Gearbox, " VOITH Turbo, 6th International Workshop on Large-Scale Integration of Wind Power and Transmission Networks for Offshore Wind Farms.
17. Ameli, M.T., Moslehpour, S., and Mirzaie, A., 2008, "Feasibility study for replacing asynchronous generators with synchronous generators in wind farm power stations, " IAJCIJME International Conference.
18. Arai, J., Dei, T., Takai, S., and Takagi, K., 2009, "Study on Application of Fixed Speed Synchronous Generator for Wind Power Generation, " The International Conference on Electrical Engineering.
19. Bolea, I, 2006, "Synchronous Generators (The Electric Generators Handbook), " Taylor and Francis Group, USA, pp. 1-28, Chap. 2.
20. Wang, F., Bai, J., Hou, Q., and Pan, J., 2005, "Design features of low speed permanent magnet generator direct driven by wind turbine", Electrical Machines and Systems, ICEMS 2005.
21. Bywaters, G., John, V., Lynch, J., Mattila, P., Nortor, G., Stowell, J., Salata, M., Labath, O., Chertok, A., and Hablanian, D., 2004, "Northern power systems windPACT drive train alternative design study report, " National Renewable Energy Laboratory (NREL), Golden, Colorado, report No. NREL/SR-500-35524.
22. Grauers, A., 1996, "Design of direct-driven permanentmagnet generators for wind turbines, " Ph.D. dissertation, Chalmers University of Technology, Göteborg, Sweden.
23. Dubois, M., 2004, "Optimized permanent magnet generator topologies for direct drive wind turbines, " Ph.D. dissertation, Delft University of Technology, Delft, The Netherlands.
24. Lampola, P., 2000, "Directly driven, low-speed permanent-magnet generators for wind power applications", Ph.D. dissertation, Helsinki University of Technology, Finland.
25. Poore, R., and Lettenmaier, T., 2003, "Alternative design study report: WindPACT advanced wind turbine drive train designs study", National Renewable Energy Laboratory (NREL), Golden, Colorado, report No. NREL/SR-500-33196.
26. Polinder, H., Pijl, F.F.A., De Vilder, G.J., and Tavner, P., 2006, "Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbine, " IEEE Trans. Energy Conversion, 21, pp. 725-733.
27. Aleksashkin, A., and Mikkola, A., 2008, "Literature Review On Permanent Magnet Generators Design and Dynamic Behavior, " Lappenranta university of Technology, ISBN 1459-2932.
28. Gupta, A., Jain, D.K., and Dahiya, S., 2012, "Some Investigations on Recent Advances in Wind Energy Conversion Systems, " IACSIT Press, Singapore, 28.
29. Cheng, K.W.E., Lin, J. K., Bao, Y.J., and Xue, X.D. 2009, "Review of Wind Generating system, " 8th International Conference Control and Management (APSCOM).
30. Eckels, P., and Snitcher, G., 2004, "5 MW High Temperature Superconductor Ship Propulsion Motor Design and Test Results, " Naval Symposium on Electric Machines, Philadelphia, PA.
31. Al-Bahadly, I., 2011, "Wind Turbines, " InTech Open Access, United Kingdom, pp. 623-638, Chap. 27, ISBN 978- 953-307-221-0.
32. Pellegrino, G.M., Villata, F., Guglielmi, P., and Vagati, A., 2003, "Design of direct-drive, low-speed PM machines, " Industry Applications Conference, 38th IAS Annual Meeting, 2, pp. 1421-1428.
33. Badrzadeh, B., 2011, "Qualitative Performance Assessment of Semiconductor Switching Device, Converter and Generator Candidates for 10 MW Offshore Wind Turbine Generators", Wind Energy J., 14(3), pp. 425-448.
34. Mittal, R., Sandu, K.S., and Jain, D. K, 2009, "Isolated Variable Speed Driven PMSG for WECS, " International Journal of Engineering and Technology, 1(3).
35. Bang, D., Polinder, H., Shrestha, G., and Ferreira, J.A., 2008, "Review of Generator Systems for Direct-Drive Wind Turbines, " Electrical Power Processing/DUWIND, Delft University of Technology, Delft, the Netherlands.
36. Li, H., and Chen, Z., 2008, "Overview of Different Wind Generator Systems and Their Comparisons, " Renewable Power Generation, 2(2), pp. 123-138.
37. Haque, M.E., Muttaqi, K.M., and Nagnevitsky, M., 2008, "A Novel Control Strategy for a Variable Speed Wind Turbine with a Permanent Magnet Synchronous Generator, " IEEE.
38. Hansen, AD., and Michalke, G., 2008, "Modeling and Control of Variable-Speed Multi-pole Permanent Magnet Synchronous Generator Wind Turbine, " Wind Energy Journal, 5, pp. 537-554.
39. Ackerman, T., 2006, "Wind power in power systems, "Wiley, London.
40. Bose, B.K., 2006, "Power electronics and motor drives: Advances and trends, " Academic press, London.
41. Siegfriedsen, S., Bohmeke, G., 1998, "Multibird Technology-A significant Stepto Multi-Megawatt Wind Turbines, " Wind Energy Journal, 1(2), pp. 89-100.
42. Dubois, M.R., 2004, "Optimized permanent magnet generator technologies for direct drive wind turbines, " Ph.D. dissertation, Delft university of Technology, Delft, the Netherlands.
43. Dang, D., Polinder, H., Shersta, G., Ferreira, J.A., 2008, "A Review of generator systems for direct-drive wind turbines, " proceedings of EWEC 2008, Brussels, Belgium.
44. Stander, J.N., Venter, G., and Kamper, M.J., 2011, "Review of direct-drive radial flux wind turbine generator mechanical design, " wind energy journal.
45. Schiferl, R., 2008, "High-Temperature Superconducting Synchronous Motors: Economic Issues for Industrial Applications, " IEEE Transactions on Industry Applications, 44(5), pp.1376-1384.
46. Lewis, C., and Muller, J., 2007, "A Direct Drive Wind Turbine HTS Generator, " IEEE Power Engineering Society General Meeting, Tampa.
47. Kalsi, S.S., Weeber, K., Takesue, H., Lewis, C., Neumueller, H.W., and Blaugher, R. D., 2004, "Development Status of Rotating Machines Employing Superconducting Field Windings, " IEEE Proceedings, 92(10), pp. 1688-1704.
48. Kalsi, S.S., 2002, "Development Status of Superconducting Rotating Machines, " IEEE PES meeting, New York, IEEE CD Cat No. 02CH37309C.
49. Hull, J.R., Murakami, M., 2004, "Applications of Bulk High Temperature Superconductors, " IEEE Proceedings, 92(10), pp. 1705-1718.
50. Masson, P.J., and Luongo, C.A., 2005, "High power Density Superconducting Motor for All-Electric Aircraft Propulsion, " IEEE Trans Applied Superconductivity, 15(2), pp. 2226-2229.
51. Superczynski, M.J., and Waltman, D.J., 1997, "Homopolar Motor with High Temperature Superconductor Field Windings, " IEEE Trans Applied Superconductivity, 7(2), pp. 513-518.
52. Nakamura, T., Miyake, H., Ogama, Y., Morita, G., Muta, I., and Hoshino, T., 2006, "Fabrication and Characteristics of HTS Induction Motor by the Use of B1-2223/Ag Squirrel-Cage Rotor, " IEEE Trans Applied Superconductivity, 16(2).
53. Windtec Solutions, 2012, "SeaTitan 10 MW", http://www.amsc.com/ documents/seatitan-10-mw-windturbine-data-sheet/.
54. Gamble, B., Snitchler, G., and Kalsi, S.S., 2006, "HTS Generator Topologies, " IEEE Power Engineering Society General Meeting.
55. Bohmeke, G., Boldt, R., and Beneke, H., 1997, "Geared drive intermediate solutions, comparisons of design features and operating economics, " Wind Energy Conference, pp. 664- 667.
56. Widyan, S., 2006, "Design, optimization, construction and test of rare-earth permanent-magnet electrical machines with new topology for wind energy applications", Ph.D. dissertation, Technical University of Berlin, Berlin, Germany.
57. Chen, Y., Pillay, P., Khan, and A., 2005, "PM wind generator topologies, " IEEE Transactions on Ind. App. 41(6), pp. 1619-1626.
58. Dubois, M.R., Polinder, H., and Ferreira, J.A., 2000, "Comparison of Generator Topologies for Direct-Drive Wind Turbines, " IEEE Nordic Workshop on Power and Industrial Electronics (NORPIE), Denmark.
59. Hansen, AD., and Hansen, L.H., 2007, "Wind turbine concept market penetration over 10 years (1995-2004), " Wind Energy Journal, 10, pp. 81-97.
60. Dubios, M.R., 2004, "Optimized Permanent Magnet Generator Technologies for Direct-Drive Wind Turbines, " PhD Dissertation, Delft University of Technology, Delft, the Netherlands.
61. BTM Consult ApS, 2012, "International Wind Energy Development World Market Update 2011".
62. Rasmussens A., 2005, "International Wind Energy Department-World Market Update 2004, Forecast 2005- 2009, " BTM Consults, Ringkøbing, Denmark.
63. Schinas, N.A., and Vovos, N. A., 2007, "An Autonomous System Supplied Only by a Pitch-Controlled Variable-Speed Wind Turbine, " IEEE Trans Energy Convers, 22(2).
64. Senjyu, T., Kikunaga, Y., Yona, A., sekiene, H., and Saber, A.Y., 2008, "Coordinate Control of Wind Turbine and Battery in Wind Power Generator System, " Power and Energy Society meeting.
65. REN 21, 2011, "Renewable 2011, Global Status Report, " Renewable energy policy network for the 21st century.
66. Vestas Wind Systems, 2011, "V164-7.0 MW", http://nozebra. ipapercms.dk/Vestas/Communication/Productbrochure/V16470MW/V16470MW/.
67. Dvorak P., 2010, "Britanica breaks the 9 MW barrier", Windpower Engineering Magazine, pp.36-42, http://www.clipperwind.com/pdf/wpe-Britannia. pdf.