Effects of maleic anhydride-grafted polypropylene (MAPP) on the physico-mechanical properties and rheological behavior of bamboo powder-polypropylene foamed composites

BioResources

Volumn 8, Issue 4, 2013, Pages 6263-6279

  Zhou, Xiaxing ^a   Yu, Yan ^b   Lin, Qiaojia ^a   Chen, Lihui ^a  

^a FUJIAN AGRICULTURE AND FORESTRY UNIVERSITY   (China)

^b INTERNATIONAL CENTER FOR BAMBOO AND RATTAN   (China)

Author keywords

Bamboo powder polypropylene foamed composite; Coupling agent; MAPP; Physico mechanical properties; Rheological behavior

Indexed keywords

BAMBOO; COUPLING AGENTS; GRAFTING (CHEMICAL); IMPACT STRENGTH; MALEIC ANHYDRIDE; MAPPING; MECHANICAL PROPERTIES; PLASTIC PRODUCTS; RHEOLOGY; WATER ABSORPTION;

BAMBOO POWDER-POLYPROPYLENE FOAMED COMPOSITES; DEGREE OF CRYSTALLINITY; INTERFACIAL COMPATIBILITY; MALEIC ANHYDRIDE GRAFTED POLYPROPYLENE; NOTCHED IMPACT STRENGTH; PHYSICOMECHANICAL PROPERTIES; RHEOLOGICAL BEHAVIORS; SURFACE WETTABILITY;

POLYPROPYLENES;

EID: 84887197360     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.8.4.6263-6279     Document Type: Article

References (28)

1. Ardanuy, M., Antunes, M., and Velasco, J. I. (2012). "Vegetable fibres from agricultural residues as thermo-mechanical reinforcement in recycled polypropylene-based green foams," Waste Management 32(2), 256-263.
2. Bledzki, A. K., Zhang, W. Y., and Omar, F. (2005). "Microfoaming of flax and wood fibre reinforced polypropylene composites," Eur. J. Wood Wood Prod. 63(1), 30-37.
3. Bledzki, A. K., and Omar, F. (2006a). "Microcellular injection molded wood fiber-PP composites: Part I-Effect of chemical foaming agent content on cell morphology and physico-mechanical properties," Journal of Cellular Plastics 42(1), 63-76.
4. Bledzki, A. K., and Omar, F. (2006b). "Microcellular injection molded wood fiber-PP composites: Part II-Effect of wood fiber length and content on cell morphology and physico-mechanical properties," Journal of Cellular Plastics 42(1), 77-88.
5. Chambon, F., and Winter, H. H. (1987). "Linear viscoelasticity at the gel point of a crosslinking PDMS with imbalanced stoichiometry," J. Rheol. 31(8), 683-997.
6. Clemons, C. (2002). "Wood-plastic composites in the United States-The interfacing of two industries," Forest Prod. J. 52(6), 10-18.
7. Deka, B. K., and Maji, T. K. (2010). "Effect of coupling agent and nanoclay on properties of HDPE, LDPE, PP, PVC blend and phargamites karka nanocomposite," Composites Science and Technology 70(12), 1755-1761.
8. Di, M., and Gao, Z. (2010). Modern Analytical Techniques for Biomass Material, Chemical Industry Press, Beijing.
9. Dominkovics, Z., Dányádi, L., and Pukánszky, B. (2007). "Surface modification of wood flour and its effect on the properties of PP/wood composites," Composites: Part A 38(8), 1893-1901.
10. Dorris, G. M., and Gray, D. G. (1978). "The surface analysis of paper and wood fiber by ESCA-electron spectroscopy for chemical analysis. Application to cellulose and lignin," Cellulose Chemistry and Technology 12, 9-23.
11. Faruk, O., Bledzki, A. K., and Matuana, L. M. (2007). "Microcellular foamed wood-plastic composites by different processes: A review," Macromolecular Materials and Engineering 292(2), 113-127.
12. Freire, C. S. R., Silvestre, A. J. D., Pascoal Neto, C., Belgacem, M. N., and Gandini, A. (2006). "Controlled heterogeneous modification of cellulose fibers with fatty acids: Effect of reaction conditions on the extent of esterification and fiber properties," J. Appl. Polym. Sci. 100(2), 1093-1102.
13. Gao, H., Song, Y., Wang, Q., Han, Z., and Zhang, M. (2008). "Rheological and mechanical properties of wood fiber-PP/PE blend composites," Journal of Forestry Research 19(4), 315-318.
14. Gao, H., Xie, Y., Ou, R., and Wang, Q. (2012). "Grafting effects of polypropylene/polyethylene blends with maleic anhydride on the properties of the resulting wood-plastic composites," Composites Part A: Applied Science and Manufacturing 43(1), 150-157.
15. Herrera-Franco, P. J., and Valadez-González, A. (2005). "A study of the mechanical properties of short natural-fiber reinforced composites," Composites Part B: Engineering 36(8), 597-608.
16. Inari, G. N., Petrissans, M., Lambert, J., Ehrhardt, J. J., and Gérardin, P. (2006). "XPS characterization of wood chemical composition after heat-treatment," Surface and Interface Analysis 38(10), 1336-1342.
17. Lee, Y. H. (2008). "Foaming of wood flour/polyolefin/layered silicate composites," PhD Thesis, University of Toronto.
18. Lu, J. Z., Wu, Q., and Negulescu, I. I. (2005). "Wood-fiber/high-density-polyethylene composites: Coupling agent performance," J. Appl. Polym. Sci. 96(1), 93-102.
19. Okubo, K., Fujii, T., and Yamamoto, Y. (2004). "Development of bamboo-based polymer composites and their mechanical properties," Composites Part A: Applied Science and Manufacturing 35(3), 377-383.
20. Ou, R., and Wang, Q. (2009). "Effects of maleic rosin on the rheological properties of wood flour/HDPE composites," Scientia Silvae Sinicae 45(5), 126-130.
21. Wei, S., Shi, J., Gu, J., Wang, D., and Zhang, Y. (2012). "Dynamic wettability of wood surface modified by acidic dyestuffand fixing agent," Appl. Surf. Sci. 258(6), 1995-1999.
22. Xie, Y., Xiao, Z., Grüneberg, T., Militz, H., Hill, C. A. S., Steuernagel, L., and Mai, C. (2010). "Effects of chemical modification of wood particles with glutaraldehyde and 1,3-dimethylol-4,5-dihydroxyethyleneurea on properties of the resulting polypropylene composites," Compos. Sci. Technol. 70(13), 2003-2011.
23. Xu, H. N., Shen, Q. Y., Ouyang, X. K., and Yang, L.Y. (2012). "Wetting of soy protein adhesives modified by urea on wood surfaces," Eur. J. Wood Wood Prod. 70(1-3), 11-16.
24. Yokozeki, T., Schulz, S. C., Buschhorn, S. T., and Schulte, K. (2012). "Investigation of shear thinning behavior and microstructures of MWCNT/epoxy and CNF/epoxy suspensions under steady shear conditions," Macromol. Nanotech. 48(6), 1042-1049.
25. Zhang, S. W., Rodrigue, D., and Riedl, B. (2005). "Preparation and morphology of polypropylene/wood flour composite foams via extrusion," Polymer Composites 26(6), 731-738.
26. Zhang, Z. X., Gao, C. Y., and Xin, Z. X. (2012). "Effects of extruder parameters and silica on physico-mechanical and foaming properties of PP/wood-fiber composites," Composites: Part B 43(4), 2047-2057.
27. Zhang, Z. X., Zhang, J., Lu, B., Xin, Z. X., Kang, C. K., and Kim, J. K. (2012). "Effect of flame retardants on mechanical properties, flammability and foamability of PP/wood-fiber composites," Composites: Part B 43(2), 150-158.
28. Zhou, X. X., Lin, Q. J., and Chen, L. H. (2012). "Effects of the chemical foaming agents on mechanical properties and rheological behavior of the bamboo powder/polypropylene foamed composite," BioResources 7(2), 2183-2198.