Rheological properties and chemical bonding of asphalt modified with nanosilica

Journal of Materials in Civil Engineering

Volumn 25, Issue 11, 2013, Pages 1619-1630

  Yao, Hui ^a   You, Zhanping ^a   Li, Liang ^b   Lee, Chee Huei ^c   Wingard, David ^d   Yap, Yoke Khin ^c   Shi, Xianming ^e   Goh, Shu Wei ^a  

^a Michigan Technological University   (United States)

^b CENTRAL SOUTH UNIVERSITY   (China)

^c MICHIGAN TECHNOLOGICAL UNIVERSITY   (United States)

^d AMRL   (United States)

^e Montana State University   (United States)

Author keywords

Asphalt; Asphalt mixture; Fourier transform infrared spectroscopy (FTIR); Nano modified asphalt; Nanomaterial; Nanosilica; Rheological; Scanning electron microscopy (SEM)

Indexed keywords

ANTI-AGING PROPERTIES; ASPHALT PAVEMENT ANALYZERS; DYNAMIC SHEAR RHEOMETER; LOW TEMPERATURE PERFORMANCE; MODIFIED ASPHALT BINDERS; NANO-SILICA; NANOMATERIAL; RHEOLOGICAL;

AGING OF MATERIALS; ASPHALT; BINDERS; CHEMICAL BONDS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; MIXTURES; RHEOLOGY; SCANNING ELECTRON MICROSCOPY;

ASPHALT MIXTURES;

ASPHALT; CHEMICAL BONDING; CRACKING; FTIR SPECTROSCOPY; RHEOLOGY; SCANNING ELECTRON MICROSCOPY; SILICA; VISCOSITY;

EID: 84886918187     PISSN: 08991561     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)MT.1943-5533.0000690     Document Type: Article

References (67)

1. Al-Hadidy, A., and Yi-qiu, T. (2011). "Effect of Styrene-Butadiene-Styrene on the Properties of Asphalt and Stone-Matrix-Asphalt Mixture." J. Mater. Civ. Eng., 23(4), 504-510.
2. Al-Khateeb, G. G., and Al-Akhras, N. M. (2011). "Properties of Portland cement-modified asphalt binder using Superpave tests." Constr. Build. Mater., 25(2), 926-932.
3. 3 superstructures: Oriented aggregation and Ostwald ripening in a one-pot solvothermal process." Powder Technol., 217(2), 274-280.
4. Anurag, K., et al. (2009). "Laboratory investigation of indirect tensile strength using roofing polyester waste fibers in hot mix asphalt." Constr. Build. Mater., 23(5), 2035-2040.
5. Arabani, M., et al. (2010). "The effect of waste tire thread mesh on the dynamic behaviour of asphalt mixtures." Constr. Build. Mater., 24(6), 1060-1068.
6. Asphalt Institute. (2003). "Superpave performance graded asphalt binder specification and testing." Superpave Series No. 1(SP-1) Lexington, KY.
7. ASTM. (2008). "Standard test method for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR)." D6648, West Conshohocken, PA.
8. ASTM. (2010a). "Standard test method for multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer." D7405, West Conshohocken, PA.
9. ASTM. (2010b). "Standard test methods for rheological properties of non-Newtonian materials by rotational (Brookfield type) viscometer." D2196, West Conshohocken, PA.
10. Bahia, H. U., and Anderson, D. A. (1995). "The new proposed rheological properties of asphalt binders: Why are they required and how do they compare to conventional properties." STP 1241, Transportation Research Board, West Conshohocken, PA.
11. Balazs, A. C., et al. (2006). "Nanoparticle polymer composites: Where two small worlds meet." Science, 314(5802), 1107-1110.
12. Brown, E. R. (2009). Hot mix asphalt materials, mixture design and construction, 3rd Ed., National Asphalt Pavement Association, Lanham, MD.
13. Cao, W. (2007). "Study on properties of recycled tire rubber modified asphalt mixtures using dry process." Constr. Build. Mater., 21(5), 1011-1015.
14. Chen, Y., et al. (2008). "Natural rubber nanocomposite reinforced with nano silica." Polym. Eng. Sci., 48(9), 1674-1677.
15. Chotirat, L., et al. (2007). "On adhesion mechanisms and interfacial strength in acrylonitrile-butadiene-styrene/wood sawdust composites." Int. J. Adhes. Adhes., 27(8), 669-678.
16. Cong, P., et al. (2012). "Effects of diatomite on the properties of asphalt binder." Constr. Build. Mater., 30(5), 495-499.
17. Cortizo, M. S., et al. (2004). "Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts." Polym. Degrad. Stab., 86(2), 275-282.
18. Ding, P., et al. (2009). "De-agglomeration of hydrophobic and hydrophilic silica nano-powders in a high shear mixer." Powder Technol., 195(3), 221-226.
19. Dong, D., et al. (2001). "Thermal degradation of acrylonitrile-butadienestyrene terpolymer in bean oil." Polym. Degrad. Stab., 73(2), 319-326.
20. Goh, S., et al. (2011). "Preliminary dynamic modulus criteria of HMA for field rutting of asphalt pavements: Michigan's experience." J. Transp. Eng., 137(1), 37-45.
21. Goh, S., et al. (2011). "Determination of flow number in asphalt mixtures from deformation rate during secondary state." Transportation Research Record 2210, Transportation Research Board, Washington, DC, 106-112.
22. Goh, S. W., et al. (2007). "Laboratory evaluation and pavement design for warm mix asphalt." Proc., 2007 Mid-Continent Transportation Research Symp., Iowa State Univ., Ames, IA.
23. Goh, S. W., and You, Z. (2009). "A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test." Constr. Build. Mater., 23(11), 3398-3405.
24. Goulias, D. G. (2001). Design, behavior, and benefits of highway materials using recycled tire rubber. Beneficial use of recycled materials in transportation applications, Univ. of New Hampshire, Durham, NH, 545-552.
25. Greenwood, N. N., and Earnshaw, A. (1998). Chemistry of the elements, 2nd Ed., Elsevier, Philadelphia.
26. Hansen, K. R., McGennis, R., Prowell, B. D., and Stonex, A. (2000). Current and future used of non-bituminous components of bituminous paving mixtures. Transportation Research Board, Washington, DC.
27. He, X., and Shi, X. (2008). "Chloride permeability and microstructure of Portland cement mortars incorporating nanomaterials." Transportation Research Record 2070, Transportation Research Board, Washington, DC, 13-21.
28. Iler, R. K. (1979). Chemistry of silica-solubility, polymerization, colloid and surface properties and biochemistry. John Wiley & Sons, New York.
29. Khattak, M. J., et al. (2011). "Mechanistic characteristics of asphalt binder and asphalt matrix modified with nano-fibers." Proc., GeoFrontiers 2011: Advances in Geotechnical Engineering, ASCE, Reston, VA.
30. Khattak, M. J., et al. (2012). "The impact of carbon nano-fiber modification on asphalt binder rheology." Constr. Build. Mater., 30(5), 257-264.
31. Kim, J., et al. (2003). "Studies on the thermal stabilization enhancement of ABS: Synergistic effect of triphenyl phosphate nanocomposite, epoxy resin, and silane coupling agent mixtures." Polym. Degrad. Stab., 79(2), 201-207.
32. Larsen, D. O., et al. (2009). "Micro-structural and rheological characteristics of SBS-asphalt blends during their manufacturing." Constr. Build. Mater., 23(8), 2769-2774.
33. Lazzara, G., and Milioto, S. (2010). "Dispersions of nanosilica in biocompatible copolymers." Polym. Degrad. Stab., 95(4), 610-617.
34. Leontaritis, K. J., and Mansoori, G. A. (1988). "Asphaltene deposition: A survey of field experiences and research approaches." J. Petrol. Sci. Eng., 1(3), 229-239.
35. Lindberg, H. K., et al. (2008). "Genotoxic effects of fumes from asphalt modified with waste plastic and tall oil pitch." Mutation Res. Genetic Toxicol. Environ. Mutagen., 653(1-2), 82-90.
36. Liu, S., et al. (2010). "Analysis and application of relationships between low-temperature rheological performance parameters of asphalt binders." Constr. Build. Mater., 24(4), 471-478.
37. Mansoori, G. A. (1997). "Modeling of asphaltene and other heavy organic depositions." J. Petrol. Sci. Eng., 17(1-2), 101-111.
38. Mrotzek, M., and Nembach, E. (2008). "Ostwald ripening of precipitates during two successive heat treatments performed at different temperatures." Acta Mater., 56(1), 150-154.
39. Odegard, G. M., et al. (2005). "Modeling of the mechanical properties of nanoparticle/polymer composites." Polymer, 46(2), 553-562.
40. Ouyang, C., et al. (2006). "Improving the aging resistance of asphalt by addition of Zinc dialkyldithiophosphate." Fuel, 85(7-8), 1060-1066.
41. Peng, Z., et al. (2007). "Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization." Compos. Sci. Technol., 67(15-16), 3130-3139.
42. Peters, S., et al. (2010). "Nanocellulose and microcellulose fibers for concrete." Transportation Research Record 2142, Transportation Research Board, Washington, DC, 25-28.
43. Probst, C., et al. (2007). "Imaging of carbon nanotubes with tin-palladium particles using STEM detector in a FE-SEM." Micron, 38(4), 402-408.
44. Putman, B. J., and Amirkhanian, S. N. (2004). "Utilization of waste fibers in stone matrix asphalt mixtures." Resour. Conserv. Recycl., 42(3), 265-274.
45. Shen, J., et al. (2009). "Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders." Constr. Build. Mater., 23(1), 304-310.
46. Shi, X., et al. (2012). "Exploring the interactions of chloride deicer solutions with nanomodified and micromodified asphalt mixtures using artificial neural networks." J. Mater. Civ. Eng., 24(7), 805-815.
47. Shiman, L., et al. (2011). "Effects of nanocomposites on the high temperature rheological properties of a PG58 asphalt-binder." Proc. GeoHunan 2011 Int. Conf., ASCE, Reston, VA.
48. Sugimoto, T. (2000). Fine particles: Synthesis, characterization, and mechanisms of growth, Marcel Dekker, New York.
49. Sun, Y., et al. (2008). "Preparation and properties of natural rubber nanocomposites with solid-state organomodified montmorillonite." J. Appl. Polym. Sci., 107(5), 2786-2792.
50. Wiberg, E., et al. (2001). Inorganic chemistry. San Diego; Berlin; New York, Academic Press; De Gruyter.
51. Witczak, M. W. (2007). "Specification criteria for simple performance tests for rutting." NCHRP Rep. 580, Transportation Research Board, Washington, DC.
52. Witczak, M. W., Kaloush, K., Pellinen, T., El-basyouny, M., and Von Quintus, H. (2002). "Simple performance test for superpave mix design." NCHRP Rep. 465, Transportation Research Board, Washington, DC.
53. Xiao, F., et al. (2009). "Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures." Constr. Build. Mater., 23(2), 1028-1034.
54. Xiao, F., et al. (2011). "Influence of carbon nanoparticles on the rheological characteristics of short-term aged asphalt binders." J. Mater. Civ. Eng., 23(4), 423-431.
55. Xu, T., and Huang, X. (2010a). "Study on combustion mechanism of asphalt binder by using TG-FTIR technique." Fuel, 89(9), 2185-2190.
56. Xu, T., and Huang, X. (2010b). "ATG-FTIR investigation into smoke suppression mechanism of magnesium hydroxide in asphalt combustion process." J. Anal. Appl. Pyrol., 87(2), 217-223.
57. Yao, H., et al. (2012). "Performance of asphalt binder blended with non-modified and polymer-modified nanoclay." Constr. Build. Mater., 35(10), 159-170.
58. Yildirim, Y. (2007). "Polymer modified asphalt binders." Constr. Build. Mater., 21(1), 66-72.
59. You, Z., et al. (2011). "Nanoclay-modified asphalt materials: Preparation and characterization." Constr. Build. Mater., 25(2), 1072-1078.
60. You, Z., Goh, S. W., and Williams, R. C. (2009). "Development of specification for the Superpave simple performance tests (SPT)." Final Rep. RC-1532, Michigan Department of Transportation, Lansing, MI, 220.
61. Yu, J., et al. (2007a). "Effect of montmorillonite on properties of styrenebutadiene- styrene copolymer modified bitumen." Polym. Eng. Sci., 47(9), 1289-1295.
62. Yu, J., et al. (2007b). "Preparation and properties of montmorillonite modified asphalts." Mater. Sci. Eng. A, 447(1-2), 233-238.
63. Yu, J.-Y., et al. (2009). "Effect of organo-montmorillonite on aging properties of asphalt." Constr. Build. Mater., 23(7), 2636-2640.
64. Zhang, B., et al. (2009). "The effect of styrene-butadiene-rubber/montmorillonite modification on the characteristics and properties of asphalt." Constr. Build. Mater., 23(10), 3112-3117.
65. Zhang, F., et al. (2011). "Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts." Constr. Build. Mater., 25(1), 129-137.
66. Zhang, F., and Yu, J. (2010). "The research for high-performance SBR compound modified asphalt." Constr. Build. Mater., 24(3), 410-418.
67. Zhang, H., et al. (2005). "Study on flammability of montmorillonite/styrene-butadiene rubber (SBR) nanocomposites." J. Appl. Polym. Sci., 97(3), 844-849.