메뉴 건너뛰기




Volumn 397-400, Issue , 2013, Pages 970-980

Manufacture of an unmanned aerial vehicle (UAV) for advanced project design using 3D printing technology

Author keywords

3D printing; Design; Manufacture; UAV

Indexed keywords

3-D PRINTING; AIRCRAFT DESIGN; INDUSTRIAL REVOLUTIONS; PRINTING TECHNOLOGIES; PROJECT DESIGNS; SMALL-SCALE TESTS; THREE-DIMENSIONAL PRINTING; WIND-TUNNEL TESTING;

EID: 84886860004     PISSN: 16609336     EISSN: 16627482     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/AMM.397-400.970     Document Type: Conference Paper
Times cited : (40)

References (63)
  • 1
    • 84870556180 scopus 로고    scopus 로고
    • Design of a Dynamic Stall Test Rig
    • © (2012) Trans Tech Publications, Switzerland
    • S. Shun and N.A. Ahmed, 'Design of a Dynamic Stall Test Rig', Applied Mechanics and Materials Vols. 215-216 (2012) pp 785-795, © (2012) Trans Tech Publications, Switzerland
    • (2012) Applied Mechanics and Materials , vol.215-216 , pp. 785-795
    • Shun, S.1    Ahmed, N.A.2
  • 2
    • 84870504530 scopus 로고    scopus 로고
    • Rapid Prototyping of Aerodynamics Research Models
    • © (2012) Trans Tech Publications, Switzerland
    • S. Shun and N.A. Ahmed, 'Rapid Prototyping of Aerodynamics Research Models', Applied Mechanics and Materials Vols. 217-219 (2012) pp 2016-2025, © (2012) Trans Tech Publications, Switzerland
    • (2012) Applied Mechanics and Materials , vol.217-219 , pp. 2016-2025
    • Shun, S.1    Ahmed, N.A.2
  • 4
    • 0023562583 scopus 로고    scopus 로고
    • A Novel 3D Laser Anemometer for Boundary Layer Studies
    • ASME Conf, Boston, USA, 15th December 1987. Also in the 3rd International Symposium on Laser Anemometry, edited by Dybs, A. et al
    • Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C., "A Novel 3D Laser Anemometer for Boundary Layer Studies," ASME Conf, Boston, USA, 15th December 1987. Also in the 3rd International Symposium on Laser Anemometry, edited by Dybs, A. et al, ASME, The Fluids Engineering Division, Vol. 55, pp.175-178.]
    • ASME, the Fluids Engineering Division , vol.55 , pp. 175-178
    • Ahmed, N.A.1    Elder, R.L.2    Foster, C.P.3    Jones, J.D.C.4
  • 5
    • 0025397925 scopus 로고
    • Miniature Laser Anemometer for 3D Measurements
    • 10.1088/0957-0233/1/3/012
    • Ahmed, N.A., Elder, R.L., Foster, C.P. & Jones, J.D.C., "Miniature Laser Anemometer for 3D Measurements," Measurement Science and Technology, Vol. 1, No. 3, 1990, pp. 272-276. doi: 10.1088/0957-0233/1/3/012.
    • (1990) Measurement Science and Technology , vol.1 , Issue.3 , pp. 272-276
    • Ahmed, N.A.1    Elder, R.L.2    Foster, C.P.3    Jones, J.D.C.4
  • 6
  • 8
    • 0026762112 scopus 로고
    • Fibre Optic Laser Anemometry for Turbomachinery Applications
    • 10.1016/0143-8166(92)90009-V
    • Ahmed, N.A., Hamid, S., Elder, R.L., Foster, C.P., Tatum, R. & Jones, J.D.C., "Fibre Optic Laser Anemometry for Turbomachinery Applications," Optics and Lasers in Engineering, Vol. 16, No. 2-3, 1992, pp.193-205. doi: 10.1016/0143-8166(92)90009-V
    • (1992) Optics and Lasers In Engineering , vol.16 , Issue.2-3 , pp. 193-205
    • Ahmed, N.A.1    Hamid, S.2    Elder, R.L.3    Foster, C.P.4    Tatum, R.5    Jones, J.D.C.6
  • 9
    • 84869485445 scopus 로고    scopus 로고
    • An acoustic energy concept for the design of a flow meter'
    • Ahmed, N.A., "An acoustic energy concept for the design of a flow meter', International Journal of Vibration and Acoustics, Vol.8, No.1, 2003, pp. 52-58.
    • (2003) International Journal of Vibration and Acoustics , vol.8 , Issue.1 , pp. 52-58
    • Ahmed, N.A.1
  • 10
    • 2342464969 scopus 로고    scopus 로고
    • Development of a functional relationship between port pressures and flow properties for the calibration and application of multi-hole probes to highly three-dimensional flows
    • Pissasale, A.J. & Ahmed, N.A., "Development of a functional relationship between port pressures and flow properties for the calibration and application of multi-hole probes to highly three-dimensional flows," Experiments in Fluids, Vol. 36, No. 3, 2004, pp. 422-436.
    • (2004) Experiments In Fluids , vol.36 , Issue.3 , pp. 422-436
    • Pissasale, A.J.1    Ahmed, N.A.2
  • 11
    • 84879774086 scopus 로고    scopus 로고
    • Demonstration of the significance and limitations of thin airfoil theory in the study of aerodynamic characteristics of an airfoil
    • Ahmed, N.A., "Demonstration of the significance and limitations of thin airfoil theory in the study of aerodynamic characteristics of an airfoil," International Journal of Mechanical Engineering Education, Vol. 34, No.2, 2004, pp. 271-282.
    • (2004) International Journal of Mechanical Engineering Education , vol.34 , Issue.2 , pp. 271-282
    • Ahmed, N.A.1
  • 12
    • 84869401908 scopus 로고    scopus 로고
    • Detection of Separation bubble using spectral analysis of fluctuating surface pressure
    • Ahmed, N.A., "Detection of Separation bubble using spectral analysis of fluctuating surface pressure," International Review of Aerospace Engineering, Vol. 4, No. 4, 2011
    • (2011) International Review of Aerospace Engineering , vol.4 , Issue.4
    • Ahmed, N.A.1
  • 13
    • 0942288806 scopus 로고    scopus 로고
    • Examining the effect of flow reversal on seven-hole probe measurements
    • Pissasale, A.J. & Ahmed, N.A., "Examining the effect of flow reversal on seven-hole probe measurements," AIAA Journal,Vol. 41, No. 12, 2003, pp. 2460-2467.
    • (2003) AIAA Journal , vol.41 , Issue.12 , pp. 2460-2467
    • Pissasale, A.J.1    Ahmed, N.A.2
  • 15
    • 77950860542 scopus 로고    scopus 로고
    • Numerical simulation of rooftop ventilator flow
    • Lien, S.J. & Ahmed, N.A., "Numerical simulation of rooftop ventilator flow," Building and Environment, Vol. 45, No. 8, 2010, pp. 1808-1815.
    • (2010) Building and Environment , vol.45 , Issue.8 , pp. 1808-1815
    • Lien, S.J.1    Ahmed, N.A.2
  • 16
    • 84869420417 scopus 로고    scopus 로고
    • Implementation of a Momentum Integral Technique for Total Drag Measurement
    • Ahmed, N.A., "Implementation of a Momentum Integral Technique for Total Drag Measurement," International Journal of Mechanical Engineering Education, Vol. 30, No.4, 2002, pp. 315-324.
    • (2002) International Journal of Mechanical Engineering Education , vol.30 , Issue.4 , pp. 315-324
    • Ahmed, N.A.1
  • 17
    • 0034861374 scopus 로고    scopus 로고
    • Pressure Measurements over a Cylinder in Crossflow using Plastic Tubing
    • Gatto, A., Byrne, K.P., Ahmed, N.A. & Archer, R.D., "Pressure Measurements over a Cylinder in Crossflow using Plastic Tubing," Experiments in Fluids, Vol. 30, No. 1, 2001, pp 43-46.
    • (2001) Experiments In Fluids , vol.30 , Issue.1 , pp. 43-46
    • Gatto, A.1    Byrne, K.P.2    Ahmed, N.A.3    Archer, R.D.4
  • 18
    • 0036646749 scopus 로고    scopus 로고
    • Theoretical calibration of a five hole probe for highly three dimensional flow
    • 10.1088/0957-0233/13/7/317
    • Pissasale, A.J. & Ahmed, N.A., "Theoretical calibration of a five hole probe for highly three dimensional flow," Measurement Science and Technology, Vol. 13, No. 7, 2002, pp1100-1107. doi: 10.1088/0957-0233/13/7/317
    • (2002) Measurement Science and Technology , vol.13 , Issue.7 , pp. 1100-1107
    • Pissasale, A.J.1    Ahmed, N.A.2
  • 19
    • 0036509510 scopus 로고    scopus 로고
    • A novel method of extending the calibration range of five hole probe for highly three dimensional flows
    • Pissasale, A.J. &Ahmed, N.A., "A novel method of extending the calibration range of five hole probe for highly three dimensional flows," Flow Measurement and Instrumentation,Vol. 13,No. 1-2, 2002, pp 23-3
    • (2002) Flow Measurement and Instrumentation , vol.13 , Issue.1-2 , pp. 23
    • Pissasale, A.J.1    Ahmed, N.A.2
  • 20
    • 79954947914 scopus 로고    scopus 로고
    • An examination of the suitability of multi-hole pressure probe technique for skin friction measurement in turbulent flow
    • Lien, S.J. & Ahmed, N.A., "An examination of the suitability of multi-hole pressure probe technique for skin friction measurement in turbulent flow," Flow Measurement and Instrumentation, Vol. 22, No. 3, 2011, pp. 153-164.
    • (2011) Flow Measurement and Instrumentation , vol.22 , Issue.3 , pp. 153-164
    • Lien, S.J.1    Ahmed, N.A.2
  • 21
    • 0034034498 scopus 로고    scopus 로고
    • Flow Behavior in a High Speed Centrifugal Impeller Passage under Design and Off-design Operating Conditions
    • Ahmed, N.A. & Elder, R.L., "Flow Behavior in a High Speed Centrifugal Impeller Passage under Design and Off-design Operating Conditions," Fluids and Thermal Engineering, JSME International series B, Vol. 43, No.1, 2000, pp. 22-28.
    • (2000) Fluids and Thermal Engineering, JSME International Series B , vol.43 , Issue.1 , pp. 22-28
    • Ahmed, N.A.1    Elder, R.L.2
  • 22
    • 0033882242 scopus 로고    scopus 로고
    • Improvement of a Wing's Aerodynamic Efficiency Using Coanda Tip Jets
    • Simpson, R.G., Ahmed, N.A. & Archer, R.D., "Improvement of a Wing's Aerodynamic Efficiency Using Coanda Tip Jets," Journal of Aircraft," Vol. 37, No. 1, 2000, pp. 183-184.
    • (2000) Journal of Aircraft , vol.37 , Issue.1 , pp. 183-184
    • Simpson, R.G.1    Ahmed, N.A.2    Archer, R.D.3
  • 23
    • 0033706017 scopus 로고    scopus 로고
    • Investigation of the Upstream End Effect of the Flow Characteristics of a Yawed Circular Cylinder
    • Gatto, A., Ahmed, N.A. & Archer, R.D., "Investigation of the Upstream End Effect of the Flow Characteristics of a Yawed Circular Cylinder," The Aeronautical Journal, Vol. 104, No. 1033, 2000, pp. 125-128.
    • (2000) The Aeronautical Journal , vol.104 , Issue.1033 , pp. 125-128
    • Gatto, A.1    Ahmed, N.A.2    Archer, R.D.3
  • 24
    • 0034276074 scopus 로고    scopus 로고
    • Surface Roughness and Free stream Turbulence Effects on the Surface Pressure over a Yawed Circular Cylinder
    • Gatto, A., Ahmed, N.A. & Archer, R.D., "Surface Roughness and Free stream Turbulence Effects on the Surface Pressure over a Yawed Circular Cylinder," Journal of Aircraft, Vol. 38, No. 9, 2000, pp. 1765-1767.
    • (2000) Journal of Aircraft , vol.38 , Issue.9 , pp. 1765-1767
    • Gatto, A.1    Ahmed, N.A.2    Archer, R.D.3
  • 25
    • 0035273008 scopus 로고    scopus 로고
    • Performance Improvement of a Bi-plane with Endplates
    • Ahmed, N.A. & Archer, R.D., "Performance Improvement of a Bi-plane with Endplates," Journal of Aircraft, Vol.38, No.2, 2001, pp 398-400.
    • (2001) Journal of Aircraft , vol.38 , Issue.2 , pp. 398-400
    • Ahmed, N.A.1    Archer, R.D.2
  • 26
    • 10644297389 scopus 로고    scopus 로고
    • Near Field Study of Vortex Attenuation using Wing Tip Blowing
    • Simpson, R.G., Ahmed, N.A. & Archer, R.D., "Near Field Study of Vortex Attenuation using Wing Tip Blowing", The Aeronautical Journal, Vol. 102, No. 1057, 2002, pp. 117-120.
    • (2002) The Aeronautical Journal , vol.102 , Issue.1057 , pp. 117-120
    • Simpson, R.G.1    Ahmed, N.A.2    Archer, R.D.3
  • 27
    • 84896086644 scopus 로고    scopus 로고
    • Lift augmentation of a low aspect ratio thick wing at a very low angle of incidence operating in ground effect
    • Ahmed, N.A. & Goonaratne, J., "Lift augmentation of a low aspect ratio thick wing at a very low angle of incidence operating in ground effect," Journal of Aircraft, Vol. 39, No.2, 2002, pp. 381-384.
    • (2002) Journal of Aircraft , vol.39 , Issue.2 , pp. 381-384
    • Ahmed, N.A.1    Goonaratne, J.2
  • 28
    • 33746564160 scopus 로고    scopus 로고
    • Investigation of dominant frequencies in the transition Reynolds number range of flow around a circular cylinder Part I: Experimental study of the relation between vortex shedding and transition frequencies
    • N.A. Ahmed,'Investigation of dominant frequencies in the transition Reynolds number range of flow around a circular cylinder Part I: Experimental study of the relation between vortex shedding and transition frequencies', Journal of CSME, vol.19, No.2, 2006, pp159-167
    • (2006) Journal of CSME , vol.19 , Issue.2 , pp. 159-167
    • Ahmed, N.A.1
  • 29
    • 33750920651 scopus 로고    scopus 로고
    • Investigation of dominant frequencies in the transition Reynolds number range of flow around a circular cylinder Part II: Theoretical determination of the relationship between vortex shedding and transition frequencies at different Reynolds numbers
    • N.A. Ahmed,'Investigation of dominant frequencies in the transition Reynolds number range of flow around a circular cylinder Part II: Theoretical determination of the relationship between vortex shedding and transition frequencies at different Reynolds numbers', Journal of CSME, vol.19, No.3, 2006, pp 317-326
    • (2006) Journal of CSME , vol.19 , Issue.3 , pp. 317-326
    • Ahmed, N.A.1
  • 30
    • 0037349743 scopus 로고    scopus 로고
    • Vortex Shedding and Transition Frequencies Associated with Flow around a Circular Cylinder
    • Ahmed, N.A. & Wagner, D.J., "Vortex Shedding and Transition Frequencies Associated with Flow around a Circular Cylinder", AIAA Journal, Vol. 41, No.3, 2003, pp.542-544.
    • (2003) AIAA Journal , vol.41 , Issue.3 , pp. 542-544
    • Ahmed, N.A.1    Wagner, D.J.2
  • 31
    • 60049091156 scopus 로고    scopus 로고
    • Commercial Aircraft Exterior Cleaning Optimization
    • Longmuir, M. & Ahmed, N.A., "Commercial Aircraft Exterior Cleaning Optimization," Journal of Aircraft, Vol. 46, No. 1, 2009, pp. 284-290.
    • (2009) Journal of Aircraft , vol.46 , Issue.1 , pp. 284-290
    • Longmuir, M.1    Ahmed, N.A.2
  • 32
    • 52749092651 scopus 로고    scopus 로고
    • The interaction of an asymmetrical localised synthetic jet on a side supported sphere
    • Findanis, N. & Ahmed, N.A., "The interaction of an asymmetrical localised synthetic jet on a side supported sphere," Journal of Fluids and Structures, Vol. 24, No. 7, 2008, pp. 1006-1020
    • (2008) Journal of Fluids and Structures , vol.24 , Issue.7 , pp. 1006-1020
    • Findanis, N.1    Ahmed, N.A.2
  • 33
    • 80051571136 scopus 로고    scopus 로고
    • Three-dimensional flow reversal and wake characterisation of a sphere modified with active flow control using synthetic jet
    • Findanis, N. & Ahmed, N.A., "Three-dimensional flow reversal and wake characterisation of a sphere modified with active flow control using synthetic jet," Advances and Applications in Fluid Mechanics, Vol. 9, No. 1, 2011, pp.17-76
    • (2011) Advances and Applications In Fluid Mechanics , vol.9 , Issue.1 , pp. 17-76
    • Findanis, N.1    Ahmed, N.A.2
  • 34
    • 84869427773 scopus 로고    scopus 로고
    • Impact Analysis of Varying Strength Counterflow Jet Ejection on a Blunt Shaped Body in A Supersonic Flow
    • Zheng, Y.Y., Ahmed, N.A. & Zhang, W., "Impact Analysis of Varying Strength Counterflow Jet Ejection on a Blunt Shaped Body in A Supersonic Flow," Advances and Applications in Fluid Mechanic, vol 12, no.2, 2012, pp 119-129
    • (2012) Advances and Applications In Fluid Mechanic , vol.12 , Issue.2 , pp. 119-129
    • Zheng, Y.Y.1    Ahmed, N.A.2    Zhang, W.3
  • 35
    • 84883550106 scopus 로고    scopus 로고
    • Parametric Study of Dynamic Stall Flow Field with Synthetic Jet Actuation
    • Article In Press
    • Yen, J., and Ahmed, N. A., "Parametric Study of Dynamic Stall Flow Field with Synthetic Jet Actuation," Journal of Fluids Engineering, Article In Press.
    • Journal of Fluids Engineering
    • Yen, J.1    Ahmed, N.A.2
  • 36
    • 84873817142 scopus 로고    scopus 로고
    • Synthetic Jets as a Boundary Vorticity Flux Control Tool
    • Article In Press
    • Yen, J., and Ahmed, N. A., "Synthetic Jets as a Boundary Vorticity Flux Control Tool," AIAA Journal, Article In Press.
    • AIAA Journal
    • Yen, J.1    Ahmed, N.A.2
  • 37
    • 84883517236 scopus 로고    scopus 로고
    • Improving Safety and Performance of Small-Scale Vertical Axis Wind Turbines
    • Yen, J., and Ahmed, N., "Improving Safety and Performance of Small-Scale Vertical Axis Wind Turbines," Procedia Engineering, Vol. 49, 2012, pp. 99-106.
    • (2012) Procedia Engineering , vol.49 , pp. 99-106
    • Yen, J.1    Ahmed, N.2
  • 38
    • 85067321372 scopus 로고    scopus 로고
    • Numerical Investigation on Two-Orifice Synthetic Jet Actuators of Varying Orifice Spacing and Diameter
    • AIAA-2011-3171
    • Riazi, H., and Ahmed, N. A., "Numerical Investigation on Two-Orifice Synthetic Jet Actuators of Varying Orifice Spacing and Diameter," 29th AIAA Applied Aerodynamics Conference, AIAA-2011-3171, 2011.
    • (2011) 29th AIAA Applied Aerodynamics Conference
    • Riazi, H.1    Ahmed, N.A.2
  • 39
    • 84864536828 scopus 로고    scopus 로고
    • Numerical Investigation of Four Orifice Synthetic Jet Actuators
    • Riazi, H., and Ahmed, N. A., "Numerical Investigation of Four Orifice Synthetic Jet Actuators," International Review of Aerospace Engineering, Vol. 4, No. 5, 2011, pp. 217-223.
    • (2011) International Review of Aerospace Engineering , vol.4 , Issue.5 , pp. 217-223
    • Riazi, H.1    Ahmed, N.A.2
  • 40
    • 82455219522 scopus 로고    scopus 로고
    • Numerical study of transient aircraft cabin flowfield with unsteady air supply
    • Wu, C., and Ahmed, N. A., "Numerical study of transient aircraft cabin flowfield with unsteady air supply," Journal of Aircraft, Vol. 48, No. 6, 2011, pp. 1994-2001.
    • (2011) Journal of Aircraft , vol.48 , Issue.6 , pp. 1994-2001
    • Wu, C.1    Ahmed, N.A.2
  • 41
    • 84862792749 scopus 로고    scopus 로고
    • A novel mode of air supply for aircraft cabin ventilation
    • Wu, C., and Ahmed, N. A., "A novel mode of air supply for aircraft cabin ventilation," Building and Environment, Vol. 56, 2012, pp. 47-56.
    • (2012) Building and Environment , vol.56 , pp. 47-56
    • Wu, C.1    Ahmed, N.A.2
  • 42
    • 82455175877 scopus 로고    scopus 로고
    • Airfoil separation control using multiple-orifice air-jet vortex generators
    • Shun, S., and Ahmed, N. A., "Airfoil separation control using multiple-orifice air-jet vortex generators," Journal of Aircraft, Vol. 48, No. 6, 2011, pp. 2164-2169.
    • (2011) Journal of Aircraft , vol.48 , Issue.6 , pp. 2164-2169
    • Shun, S.1    Ahmed, N.A.2
  • 43
    • 84880840366 scopus 로고    scopus 로고
    • Utilizing Vortex Acceleration to Improve the Efficiency of Air Jet Vortex Generators
    • Shun, S., and Ahmed, N. A., "Utilizing Vortex Acceleration to Improve the Efficiency of Air Jet Vortex Generators," 6th AIAA Flow Control Conference, 2012.
    • (2012) 6th AIAA Flow Control Conference
    • Shun, S.1    Ahmed, N.A.2
  • 44
    • 0035438519 scopus 로고    scopus 로고
    • Poststall behaviour of a wing under externally imposed sound
    • Ahmed, N. A., and Archer, R. D., "Poststall behaviour of a wing under externally imposed sound," Journal of Aircraft, Vol. 38, No. 5, 2001, pp. 961-963.
    • (2001) Journal of Aircraft , vol.38 , Issue.5 , pp. 961-963
    • Ahmed, N.A.1    Archer, R.D.2
  • 45
    • 84886830035 scopus 로고    scopus 로고
    • A computational analysis of the flow over a side-supported sphere with localised synthetic jet
    • (accepted for presentations), San Diego, USA, 24-27 June
    • N. Findanis and N. A. Ahmed, 'A computational analysis of the flow over a side-supported sphere with localised synthetic jet', (accepted for presentations), 43rd AIAA Fluid Dynamics Conference: Flow Control: sensors and actuators, San Diego, USA, 24-27 June, 2013
    • (2013) 43rd AIAA Fluid Dynamics Conference: Flow Control: Sensors and Actuators
    • Findanis, N.1    Ahmed, N.A.2
  • 50
    • 80053122785 scopus 로고    scopus 로고
    • 'Real-time Simulation as a new tool in Future Advanced Aerospace Project Design and Manufacturing Processes'
    • N.A. Ahmed and J.R. Page, 'Real-time Simulation as a new tool in Future Advanced Aerospace Project Design and Manufacturing Processes', Advanced Materials Research, Vols. 317-319, 2011, pp 2515-2519
    • (2011) Advanced Materials Research , vol.317-319 , pp. 2515-2519
    • Ahmed, N.A.1    Page, J.R.2
  • 51
    • 80053094854 scopus 로고    scopus 로고
    • 'Developing and integrated approach to advanced aerospace project design in tertiary education'
    • N.A. Ahmed and J.R. Page, 'Developing and integrated approach to advanced aerospace project design in tertiary education', Advanced Materials Research, Vols. 317-319, 2011. pp 2520-2529
    • (2011) Advanced Materials Research , vol.317-319 , pp. 2520-2529
    • Ahmed, N.A.1    Page, J.R.2
  • 52
    • 84898643570 scopus 로고    scopus 로고
    • 'Flight Simulation As An Aid To Advanced Project Design'
    • Brisbane, Queensland, Australia, June 4 - 7
    • N.A. Ahmed and J.R. Page, 'Flight Simulation As An Aid To Advanced Project Design', SimTecT2007, Brisbane, Queensland, Australia, June 4 - 7, 2007
    • (2007) SimTecT2007
    • Ahmed, N.A.1    Page, J.R.2
  • 53
    • 84886823378 scopus 로고    scopus 로고
    • Simulating a Conceptual Unconventional MAV
    • Melbourne, May12-15
    • J.R. Page and N.A. Ahmed, 'Simulating a Conceptual Unconventional MAV', SimTecT2008 Confe, Melbourne, May12-15,2008
    • (2008) SimTecT2008 Confe
    • Page, J.R.1    Ahmed, N.A.2
  • 54
    • 84879747875 scopus 로고    scopus 로고
    • Enhancing Vertical Axis Wind Turbine Safety and Performance Using Synthetic Jets
    • (in Press)
    • Yen, J. & Ahmed, N.A., "Enhancing Vertical Axis Wind Turbine Safety and Performance Using Synthetic Jets," (in Press) Journal of Wind and Industrial Aerodynamics.
    • Journal of Wind and Industrial Aerodynamics
    • Yen, J.1    Ahmed, N.A.2
  • 55
    • 0037870560 scopus 로고    scopus 로고
    • Study of Aerodynamic Forces on Rotating Wind Driven Ventilator
    • Rashid, D.H., Ahmed, N.A. & Archer, R.D., "Study of Aerodynamic Forces on Rotating Wind Driven Ventilator," Wind Engineering, Vol. 27, No.1, 2003, pp. 63-72.
    • (2003) Wind Engineering , vol.27 , Issue.1 , pp. 63-72
    • Rashid, D.H.1    Ahmed, N.A.2    Archer, R.D.3
  • 56
    • 39349105613 scopus 로고    scopus 로고
    • Utilizing wind and solar energy as power sources for a hybrid building ventilation device
    • Shun, S. & Ahmed, N.A., "Utilizing wind and solar energy as power sources for a hybrid building ventilation device," Renewable Energy, Vol. 33, No. 6, 2008, pp. 1392-1397
    • (2008) Renewable Energy , vol.33 , Issue.6 , pp. 1392-1397
    • Shun, S.1    Ahmed, N.A.2
  • 57
    • 84879749169 scopus 로고    scopus 로고
    • Chap. 24, Muyeen, S. M. (ed.), In-Tech Europe, Croatia, ISBN: 978-953-7619-81-7
    • Ahmed, N.A., Wind Power, Chap. 24, Muyeen, S. M. (ed.), In-Tech Europe, Croatia, 2010. ISBN: 978-953-7619-81-7
    • (2010) Wind Power
    • Ahmed, N.A.1
  • 59
    • 78651412806 scopus 로고    scopus 로고
    • Effect of inclined roof on the airflow associated with a wind driven turbine ventilator
    • Lien, S.J. & Ahmed, N.A., "Effect of inclined roof on the airflow associated with a wind driven turbine ventilator," Energy and Buildings, Vol. 43, No. 2-3, 2011, pp. 358-365
    • (2011) Energy and Buildings , vol.43 , Issue.2-3 , pp. 358-365
    • Lien, S.J.1    Ahmed, N.A.2
  • 60
    • 0036525683 scopus 로고    scopus 로고
    • Testing of a Highly Loaded Horizontal Axis Wind Turbines designed for Optimum Performance
    • Ahmed, N.A. & Archer, R.D., "Testing of a Highly Loaded Horizontal Axis Wind Turbines designed for Optimum Performance," Renewable Energy, Vol. 25, No. 4, 2002, pp. 613-618.
    • (2002) Renewable Energy , vol.25 , Issue.4 , pp. 613-618
    • Ahmed, N.A.1    Archer, R.D.2
  • 61
    • 84874412136 scopus 로고    scopus 로고
    • 'A Novel Small Scale Efficient Wind Turbine for Power Generation'
    • N.A. Ahmed, 'A Novel Small Scale Efficient Wind Turbine for Power Generation', Renewable Energy, vol 57, September issue, 2013, pp 79-85
    • (2013) Renewable Energy , vol.57 , pp. 79-85
    • Ahmed, N.A.1
  • 62
    • 84874402320 scopus 로고    scopus 로고
    • Engineering solutions towards cost effective sustainable environment and living
    • Ahmed, N.A., "Engineering solutions towards cost effective sustainable environment and living," Journal of Energy and Power Engineering, Vol. 6, No. 2, 2012, pp. 155-167.
    • (2012) Journal of Energy and Power Engineering , vol.6 , Issue.2 , pp. 155-167
    • Ahmed, N.A.1
  • 63
    • 84886811424 scopus 로고    scopus 로고
    • Novel developments towards efficient and cost effective wind energy generation and utilization for sustainable environment
    • ISSN 2172-038X, April
    • Ahmed, N.A., "Novel developments towards efficient and cost effective wind energy generation and utilization for sustainable environment," Renewable and Power Quality Journal, ISSN 2172-038X, No. 10, April 2012, pp. PL4.
    • (2012) Renewable and Power Quality Journal , Issue.10
    • Ahmed, N.A.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.