Simulation of transcatheter aortic valve implantation under consideration of leaflet calcification

Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

Volumn , Issue , 2013, Pages 711-714

  Russ, Christoph ^a   Hopf, Raoul ^b   Hirsch, Sven ^a   Sundermann, Simon ^a   Falk, Volkmar ^a   Szekely, Gabor ^a   Gessat, Michael ^a  

^a ETH ZURICH   (Switzerland)

^b UNIVERSITY HOSPITAL ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

AORTIC HEART VALVES; BIOMECHANICAL SIMULATION; INTERVENTION PLANNING; MATERIAL PARAMETER; MINIMALLY INVASIVE; PLANNING AND EXECUTION; PROCEDURE PLANNING; TRANSCATHETER AORTIC VALVES;

BIOMINERALIZATION; BLOOD VESSELS; BONE; COMPUTERIZED TOMOGRAPHY; STENTS;

COMPUTER SIMULATION;

AORTA VALVE; AORTA VALVE STENOSIS; CALCINOSIS; CARDIOMYOPATHY; COMPLICATION; COMPUTER ASSISTED TOMOGRAPHY; COMPUTER SIMULATION; HEART VALVE PROSTHESIS; HUMAN; PATHOLOGY; RADIOGRAPHY; STENT; SURGERY; TRANSCATHETER AORTIC VALVE IMPLANTATION;

AORTIC VALVE; AORTIC VALVE STENOSIS; CALCINOSIS; CARDIOMYOPATHIES; COMPUTER SIMULATION; HEART VALVE PROSTHESIS; HUMANS; STENTS; TOMOGRAPHY, X-RAY COMPUTED; TRANSCATHETER AORTIC VALVE REPLACEMENT;

EID: 84886569143     PISSN: 1557170X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/EMBC.2013.6609599     Document Type: Conference Paper

References (18)

1. S. Mendis, P. Puska and B. Norrving, Global Atlas on cardiovascular disease prevention and control, 2011.
2. C. Russ, M. Gessat, G. Szekely and V. Falk, Rapid Prototyping of Silicone-based Phantom Models for Stent Simulation Validation, Proceedings of MICCAI-Stent'12 1st MICCAI-Workshop on Computer Assistent Stenting, 2012.
3. A. Bernardini, I. Larrabide, L. Petrini, G. Pennati, E. Flore, M. Kim and A. F. Frangi, Deployment of self-expandable stents in aneurysmatic cerebral vessels: comparison of different computational approaches for interventional planning, Computer Methods in Biomechanics and Biomedical Engineering, vol. 15(3), pp.303-311, 2011.
4. I. Larrabide, M. Kim, L. Augsburger, M. Cruz Villa-Uriol and D. R̈ufenacht and A.F. Frangi, Fast virtual deployment of self-expandable stents: Method and in vitro evaluation for intracranial aneurysmal stenting, Medical Image Analysis, vol. 16(3), pp.721-730, 2012.
5. K. Takashima, T. Kitou, K, Mori and K. Ikeuchi, Simulation and experimental observation of contact conditions between stents and artery models, Medical Engineering & Physics, vol. 29(3), pp.326- 335, 2007.
6. S.N. David Chua, B.J. Mac Donald and M.S.J. Hashmi, Finite element simulation of slotted tube (stent) with the presence of plaque and artery by balloon expansion, Proceedings of the International Conference on Advances in Materials and Processing Technologies Part 2, vol. 155- 156, pp. 1772-1779, 2004.
7. S. Tzamtzis, J. Viquerat, J. Yap, M.J. Mullen and G. Burriesci, Numerical analysis of the radial force produced by the Medtronic-CoreValve and Edwards-SAPIEN after transcatheter aortic valve implantation (TAVI), Medical Engineering & Physics, vol. 35(1), pp. 125-130, 2013.
8. De Bock, F. Iannaccone, G. De Santis, M. De Beule, D. Van Loo, D. Devos, F. Vermassen, P. Segers and B. Verhegghe, Virtual evaluation of stent graft deployment: A validated modeling and simulation study, Journal of the Mechanical Behavior of Biomedical Materials, vol. 13, pp. 129-139, 2012.
9. F. Auricchio, M. Conti, A. Ferrara, S. Morganti and A. Reali, Patientspecific simulation of a stentless aortic valve implant: the impact of fibres on leaflet performance, Computer Methods in Biomechanics and Biomedical Engineering, pp. 1-9, 2012.
10. Philips HeartNavigator, http://www.newscenter.philips. com/main/standard/news/press/2011/20111221- heartnavigator.wpd, 2011.
11. W. Lorensen and H. Cline, Marching cubes: A high resolution 3D surface construction algorithm, Computer Graphics, vol. 21(3), pp. 163-169, 1987.
12. R. Hopf, M. Gessat, V. Falk and E. Mazza, Reconstruction of Stent Induced Loading Forces on the Aortic Valve Complex, Proceedings of MICCAI-Stent'12 1st MICCAI-Workshop on Computer Assistent Stenting, 2012.
13. F. Auricchio, M. Conti, A. Ferrara, S. Morganti and A. Reali, Patientspecific finite element analysis of carotid artery stenting: A focus on vessel modeling, International Journal for Numerical Methods in Biomedical Engineering, 2012.
14. G.A. Holzapfel, M. Stadler and T.C. Gasser, Changes in the mechanical environment of the stenotic arteries during interaction with stents: computational assessment of parametric stent design, Journal of Biomechanical Engineering, vol. 127(1), pp. 166-180, 2005.
15. P. Mortier, G.A. Holzapfel, M. De Beule, D. Van Loo, Y. Taeymans, P. Segers, P. Verdonck and B. Verhegghe, A novel simulation strategy for stent insertion and deployment in curved coronary bifurcations: comparison of three drug-eluting stents, Annalas of Biomedical Engineering, vol. 38(1), pp. 88-99, 2010.
16. M. Gessat, T. Pollok, A. Laubenheimer, S.H. S̈undermann and V. Falk, Automatic Landmark Extraction for Stent Deformation Analysis after Transcatheter Aortic Valve Implantation, CARS 2012: Computer Assisted Radiology and Surgery - Proceedings of the 26th International Congress and Exhibition, 2012.
17. T.M. Koch, B.D. Reddy, P. Zilla and T. Franz, Aortic Valve Leaflet Mechanical Properties Facilitate Diastolic Valve Function, Computer Methods in Biomechanics and Biomedical Engineering, vol. 13(2), pp. 225-234, 2010.
18. T.C. Gasser, R.W. Ogden and G.A. Holzapfel, Hyperelastic modelling of arterial layers with distributed collagen fibre orientations, Journal of the Royal Society Interface, vol. 3(6), pp. 15-35, 2006.