Modifications in the bulk and the surface of unbleached lignocellulosic fibers induced by a heat treatment without water removal: Effects on fibre relaxation of PFI-beaten kraft fibers

European Journal of Wood and Wood Products

Volumn 71, Issue 6, 2013, Pages 725-738

  Leitner, Johannes ^a   Seyfriedsberger, Gerhard ^b   Kandelbauer, Andreas ^c  

^a GRAZ UNIVERSITY OF TECHNOLOGY   (Austria)

^b Kompetenzzentrum Holz   (Austria)

^c REUTLINGEN UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CELL WALL STRUCTURE; FIBER PROPERTIES; INCREASED TEMPERATURE; INCREASING TEMPERATURES; LIGNOCELLULOSIC FIBERS; POTENTIAL MECHANISM; RE-AGGREGATION; UNBLEACHED KRAFT PULPS;

CELLULOSE; KRAFT PULP; TENSILE STRENGTH;

FIBERS;

FIBERS; HEAT TREATMENT; LIGNOCELLULOSE; TENSILE STRENGTH; UNBLEACHED PULPS;

EID: 84886095316     PISSN: 00183768     EISSN: 1436736X     Source Type: Journal    
DOI: 10.1007/s00107-013-0723-2     Document Type: Article

References (57)

1. Andreasson B, Forsström J, Wagberg L (2003) The porous structure of pulp fibres with different yields and its influence on paper strength. Cellulose 10:111-123
2. Bachner K, Fischer K, Bäucker E (1993) Zusammenhang zwischen Aufbau der Zellwand und Festigkeitseigenschaften bei Faserstoffen von konventionellen und neuen Aufschlussverfahren. Das Papier 10A:V30-V40
3. Back EL, Salmen L (1982) Glass transition of wood components hold implications for molding and pulping processes. Tappi J 65(7):107-110
4. Banavath HN, Bhardwaj NK, Ray AK (2011) A comparative study of the effect of refining on charge of various pulps. Bioresour Technol 102:4544-4551
5. Bardage S, Donaldson L, Tokoh C, Daniel G (2004) Ultrastructure of the cell wall of unbeaten Norway spruce pulp fibre surfaces. N Pulp Pap Res J 19(4):448-452
6. Brännvall E (2007) Aspects on strength delivery and higher utilisation of the strength potential of softwood kraft pulp fibres. PhD thesis, Department of Fibre and Polymer Technology, KTH Royal Institute of Technology, Stockholm
7. Dahlman O, Jacobs A, Sjöberg J (2003) Molecular properties of hemicelluloses located in the surface and inner layers of hardwood and softwood pulps. Cellulose 10:325-334
8. De Souza IJ, Bouchard J, Methot M, Berry R, Argyropoulus DS (2002) Carbohydrates in oxygen delignification - part 1: changes in cellulose crystallinity. J Pulp Pap Sci 28(5):167-170
9. Ellis MJ, Duffy JJ, Allison RW, Kibblewhite RP (1997) Fiber deformations during medium consistency mixing: role of residence time and impeller geometry. Proc 51st Appita An Gen Conf 2:643-649
10. Evans R, Newman RH, Roick UC, Suckling ID, Wallis FA (1995) Changes in cellulose crystallinity during kraft pulping. Comparison of infrared, X-ray diffraction and solid state NMR results. Holzforschung 49(6):498-504
11. Forsström J, Torgnysdotter A, Wagberg L (2005) Influence of fibre/fibre joint strength and fibre flexibility on the strength of paper from unbleached kraft fibres. N Pulp Pap Res J 20(2):186-191
12. Freese M, Schmidt I, Fischer K (2006) Hemicellulose composition in the outer cell wall layers of paper grade and dissolving pulp. Macromol Symp 232:13-18
13. Fung BM, Khitrin AK, Ermolaev K (2007) An improved broadband decoupling sequence for liquid crystals and solids. J Magn Reson 142:97-101
14. Gullichsen J, Fogelholm C-J (1999) Chemical pulping, Chapter 2. In: Gullichsen J, Fogelholm C-J (eds) Papermaking science and technology, Book 6A. ISBN: 952-5216-06-3
15. Halonen H (2012) Structural changes during cellulose composite processing. Doctoral thesis, KTH Royal Institute of Technology, Stockholm
16. Harris G, Karnis A (1986) Storage of latent mechanical pulps. J Pulp Pap Sci 12(4):J100-J107
17. Hartler N (1995) Aspects on curled and microcompressed fibers. N Pulp Pap Res J 1:4-7
18. Horvath AE (2003) Appropriate conditions for polyelectrolyte titration to determine the charge of cellulosic fibers. Licentiate thesis, KTH Royal Institute of Technology, Stockholm
19. Htun M, Engstrand P, Salmen L (1988) The implication of lignin softening on latency removal of mechanical and chemimechanical pulps. J Pulp Pap Sci 14(5):J109-J113
20. Hubbe MA, Rojas OJ, Lucia LA, Jung TM (2007) Consequences of the nanoporosity of cellulosic fibers on their streaming potential and their interactions with cationic polyelectrolytes. Cellulose 14(6):655-671
21. 13C-NMR study of cellulose structure in spruce wood and kraft pulp. Cellulose 7:35-55
22. Hult E-L, Larsson PT, Iversen T (2000b) Cellulose fibril aggregation - an inherent property of kraft pulps. Polymer 42:3309-3314
23. ISO 1924-3 (2005) Paper and board - determination of tensile properties, part 3-constant rate of elongation method 100 mm/min
24. ISO Standard (2004) 5269-2. Pulps-prep of lab sheets for physical testing, Part 2-Rapid-Köthen method
25. Kangas H, Kleen M (2004) Surface chemical and morphological properties of mechanical pulp fines. N Pulp Pap Res J 19(2):191-199
26. Karlsson H, Fransson P, Mohlin U-B (1999) STFI Fibermaster. Swedish Association of pulp and paper science (SPCI) 6th international conference on new available technologies, Stockholm, pp 367-374
27. Karnis A (1993) Latency in mechanical pulp fibres. Paperi Ja Puu Pap Timber 75(7):505-511
28. Knutsson T, Stockman L (1958) The effect of mechanical treatment during the final stages of a cook on beating properties and strength of sulphate pulp. Tappi J 41(11):704-709
29. Larsson PT, Wickholm K, Iversen T (1997) A CP/MAS 13C NMR investigation of molecular ordering in celluloses. Carbohydr Res 302:19-25
30. Leitner J (2010) Effects of high temperature treatments on various chemical pulp and paper properties - a review. In: proceedings of the Zukunft Forum Papier - Die österreichische Papierfachtagung, Graz, Austria
31. Leitner J, Zuckerstätter G, Schmied F, Kandelbauer A (2013) Modifications in the bulk and the surface of unbleached lignocellulosic fibers induced by a heat treatment without water removal - effects on tensile properties of unrefined kraft pulp. Europ J Wood Prod 71(1):101-110
32. Leonhardt W (2003) Faserumformungen beim Kneten im " Hochtemperaturbereich". Wochenbl Papierfabrikation 131(3):88-93
33. Liimatainen H, Haapala A, Niinimäki J (2009) Retention of PCC and GCC fillers on chemical pulp fines surfaces. Tappi J 8(9):38-42
34. Liitiä T, Maunu SL, Hortling B (2001) Solid state NMR studies on inhomogeneous structure of fibre wall in kraft pulp. Holzforschung 55(5):503-510
35. Lindström T (1979) Polyelectrolyte and colloidal behaviour of technical lignins. Dissertation, Royal Institute of Technology, Stockholm
36. Lindström T (1980) Der Einfluß chemischer Faktoren auf Faserquellung und Papierfestigkeit. Das Papier 34(11):561-568
37. Lunan WE, Sferraza MJ, Franzen RG, May WD (1986) Curl-Setting during storage of thermomechanical pulp at high consistency. J Pulp Pap Sci 42(4):J108-J115
38. Lyytikäinen K, Saukkonen E, Kajanto I, Käyhkö J (2011) The effect of hemicelluloses extraction on fiber charge properties and retention behavior of kraft pulp fibers. BioResources 6(1):219-231
39. MacLeod JM, Pelletier LJ (1987) Basket cases: kraft pulps inside digesters. Tappi J 70(11):47-53
40. Mohlin U-B (1980) Latency in thermomechanical pulps - contribution of the various pulp fractions. Tappi J 63(3):83-86
41. Mohlin U-B, Pettersson B (2002) Improved papermaking by cellulose treatment before refining. In: Viikari L, Lantto R (eds) Biotechnology in the pulp and paper industry; 8th ICBPPI meeting, Elsevier, Amsterdam, pp 291-299
42. Nyholm K, Ander P, Bardage S, Geoffrey D (2001) Dislocations in pulp fibres - their origin, characteristics and importance - a review. N Pulp Pap Res J 16(4):376-384
43. Östberg G, Salmen L, Fält A (1990) The softening behavior of different cell wall layers. J Pulp Pap Sci 16(2):J58-J62
44. Page DH, Barbe MC, Seth RS, Jordan BD (1984) The mechanism of curl creation, removal and retention in pulp fibres. J Pulp Pap Sci 5:J74-J79
45. Pavalainen L (1993) Conformability, flexibility and collapsibility of sulphate pulp fibers. Paperi ja puu Pap Timber 75(9-10):689-702
46. Roffael E, Schaller K (1971) Einfluß Thermischer Behandlung auf cellulose. Holz Roh- Werkst 29(7):275-278
47. Salmen L, Olsson A-M (1998) Interaction between hemicelluloses, lignin and cellulose: structure-property relationships. J Pulp Pap Sci 24(3):99-103
48. Seth RS (2006) The importance of fiber straightness for pulp strength. Pulp Pap Can 107(1):34-42
49. Seth RS, Bennington CPJ (1995) Fiber morphology and the response to medium consistency fluidization. Tappi J 78(12):152-154
50. Sjöberg J, Höglund H (2005) Refining system for sack paper pulp: part 1 HC refining under pressurised conditions and subsequent LC refining. N Pulp Pap Res J 20(3):320-328
51. Stockman L, Teder A (1963) The effect of drying on the properties of papermaking pulps. Part 2 the effect of heat-treatment on the mechanical properties. Svensk Papperstid 66(20):822-833
52. Sundberg A, Pranovich AV, Holmbom B (2003) Chemical characterization of various types of mechanical pulp fines. J Pulp Pap Sci 29(5):173-178
53. Tschirner U, Barsness J, Keeler T (2007) Recycling of chemical pulp from wheat straw corn stover. BioResources 2(4):536-543
54. Wan J, Wang Y, Xiao Q (2010) Effects of hemicelluloses removal on cellulose fiber structure and recycling characteristics of eucalyptus pulp. Bioresour Technol 101:4577-4583
55. Welf ES, Benditti RA, Hubbe JJ, Pawlak JJ (2005) The effects of heating without water removal and drying on the swelling measured by water retention value and degradation as measured by intrinsic viscosity of cellulose papermaking fibers. Progr Pap Recycl 14(3):5-13
56. Winter L, Wagberg L, Ödberg L, Lindström T (1985) Polyelectrolytes absorbed on the surface of cellulosic materials. J Coll Interface Sci 111(2):537-543
57. Zuckerstaetter G, Schild G, Wollboldt P, Roeder T, Weber HK, Sixta H (2009) The elucidation of cellulose supramolecular structure by 13C CP-MAS NMR. Lenzinger Ber 87:38-46