AC machine systems: Mathematical model and parameters, analysis, and system performance

AC Machine Systems: Mathematical Model and Parameters, Analysis, and System Performance

Volumn , Issue , 2009, Pages 1-489

  Gao, Jingde ^a   Zhang, Linzheng ^a   Wang, Xiangheng ^a  

^a TSINGHUA UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84885702999     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-3-642-01153-5     Document Type: Book

References (61)

1. Gao J D, Wang X H (1987). Multi-loop theory of AC machines. Journal of Tsinghua University (Science and Technology), 1: 1-8 (in Chinese)
2. Gao J D, Wang X H, Jin Q M (1987). Calculation of loop parameters of salient-pole synchronous machine. Journal of Tsinghua University (Science and Technology), 1: 9-19 (in Chinese)
3. Gao J D, Wang X H, Li F H (1993). Analysis of AC Machines and Their Systems, First Edition. Beijing: Tsinghua University Press (in Chinese)
4. Gao J D, Wang X H, Li F H (2005). Analysis of AC Machines and Their Systems, 2nd Edition. Beijing: Tsinghua University Press (in Chinese)
5. Wang X H, Sun Y G, Ouyan g B, Wang W J, Zhu Z Q, Howe D (2002) Transient behavior of salient-pole synchronous machines with internal stator winding faults. IEE Proc.-Electr. Power Appl. 2: 143-151 (Pubitemid 34434121)
6. Wang X H, Chen S L, Wang W J, Sun Y G, Xu L Y (2002). A study of armature winding internal faults for turbogenerators. IEEE Trans. on IA, 3: 625-631
7. Gao J D, Zhang L Z (1982). Fundamental Theory and Analysis Mothods of Transients in Electric Machines. Beijing: Science Press (in Chinese)
8. Danileviq Y B, Dombloski V V, Kazovski E Y (1965). Parameters of AC machines. Beijing: Science Press (in Russian)
9. Wang X H, Lo K L (1997). New development of torque analysis of synchronous machine. Electric Machines and Power Systems, 8: 827-838 (Pubitemid 127719989)
10. Gao J D (1963) AC machine transients and operating modes analysis (Chapter 2, 3, 4, in Chinese). Science Press, Beijing
11. Gao J D, Zhang L Z (1982) Fundamental theory and analysis mothods of transients in electric machines, Vol 1 (Chapter 1, 4, 5, in Chinese). Science Press, Beijing
12. Gao J D, Wang X H, Li F H (2004) Analysis of ac machines and their systems, 2nd Ed (Chapter 2, in Chinese). Tsinghua University Press, Beijing
13. Jackson W B, Winchester R L (1969) Direct-and quadrature-axis equivalent circuits for solid-rotor turbine generators. J IEEE Trans. PAS-88(7): 1121-1136
14. Randin A W (1945) Per unit impedances of salient-pole synchronous machines. J AIEE Trans. Aug. Part I: 569-573, Dec. Part II: 839-841
15. Randin A W (1945) The direct-and quadrature-axis equivalent circuits of the synchronous machine. J AIEE Trans. Aug. Part I: 569-573, Dec. Part II: 867-868
16. Gao J D (1963) AC machine transients and operating modes analysis, Vol 2 (Chapter 7, 8, in Chinese). Science Press, Beijing
17. Gao J D, Zhang L Z, Huang L P (1983) Induction motor reswitching transients and the methods of restraining the reswitching surge current in an induction motor (in Chinese). China Symposium on Electric Machines, Shanghai, pp 154-162
18. Gao J D, Zhang L Z, Huang L P (1984) Study of starting characteristics for induction motors (in Chinese). J Electrotechnical Journal, Chinese Electrotechnical Society, Beijing 1: 1-6
19. n Ed (Chapter 1, 5, in Chinese). Tsinghua University Press, Beijing
20. Rustebakke H M, Concordia C (1970) Self-excited oscillations in a transmission system using series capacitors. J IEEE Trans. PAS-89 (7): 1504-1512
21. Wang X H, Wu X Z (2008) Research on dual-stator winding multi-phase high-speed induction generator with rectifier load. J Sci China Ser E-Tech Sci, 51(6): 683-692
22. Wu X Z, Wang X H (2007) Circuit analysis of power winding with rectifier system for 12-phase induction generator (in Chinese). J CSEE 27(15): 75-82
23. Wu X Z, Wang X H (2007) Determination of control winding current and stator frequency for dual stator-winding high-speed induction generator (in Chinese). J CSEE 27(18): 23-29
24. Wu X Z, Wang X H, Luo C (2005) Relationship between harmonic currents and corresponding harmonic magnetomotive forces of multi-phase induction machines (in Chinese). J Tsinghua Univ. (Sci&Techn.) 45(7): 865-868 (Pubitemid 41221383)
25. Zhang B D, Zhang L Z (1988) Some measures to decrease the switching-over surge current when starting an induction motor and renewal evaluation of several classical starting mothods (in Chinese). J Beijing Society of Electrical Engineering 3: 27-40
26. Zhang B D, Zhang L Z, Wang Z R (1988) Analysis and calculation of switching-over current for starting an induction motor by use of reduction of its stator voltage (in Chinese). J Beijing Society of Electrical Engineering 3: 11-26
27. Zhang L Z (1995) Transient theory of induction machines and its uses in some aspects. Proc CICEM'95, International Academic Publishers, Hangzhou, pp 338-342
28. Zhang L Z, Cheang T S (1999) Further research on double fed induction motors controlled by inverters. Proc CICEM'99, International Academic Publishers, Xi'an, pp 29-32
29. Zhang L Z, Chok S C, Cheang T F (1995) Internal faults of 3-phase induction motors. Proc CICEM'95, International Academic Publishers, Hangzhou, pp 323-325
30. Qiu A R, Zhang L Zo (1987) Steady Performance Analysis of Rotor Failures of Bar Broking and End Ring Broking of Squirrel Asynchronous Machine (in Chinese). Transactions of China Electrotechnical Society, 3: 7-12
31. Zhang L Z, Qiu A R (1987) Detecting Rotor Failure of Asynchronous Machine by Frequency Spectrum Analysis (in Chinese). Transactions of China Electrotechnical Society, 4: 46-50
32. Williamson S, Smith A C (1982) Steady-state analysis of 3-phase cage motors with rotor-bar and end-ring faults. IEE Proc. B, 3: 93-100 (Pubitemid 12533218)
33. Kinitsky V A (1965) Calculation of Internal Fault Currents in Synchronous Machines. IEEE PAS, 5: 381-389
34. Kinitsky V A (1968) Digital Computer Calculation of Internal Fault Currents in a Synchronous Machines,.IEEE PAS, 8: 1675-1679
35. Kazofusk E Y i, etc. (1969) Abnormal Operation of Large Scale Synchronous Machine (in Russian). Science Press
36. Wang Xiangheng (1987) The Internal Fault Analysis of Stator Winding of Synchronous Machine with Multi Branches on No-load (in Chinese). Proceeding of the CSEE, 5: 1-10
37. Brameller A, Pandy R S (1974) General Fault Analysis using Phase Frame of Reference. PIEE, 5: 366-368
38. Zhang L Z, Wang X H, Gao J D (1991) A New Approach to Analysis of Synchronous Machines with Asymmetrical Armature Windings (I), Fundamental and Approach. Science in China, Series A, 7: 866-874
39. Zhang L Z, Wang X H, Gao J D (1991) A New Approach to Analysis of Synchronous Machines with Asymmetrical Armature Windings (II), Parameter Calculation. Science in China, Series A, 8: 998-1004
40. Wang X H, Sun Y G, Ouyang B, Wang W J, Zhu Z Q, Howe D (2002) Transient behavior of salient-pole synchronous machines with internal stator winding faults. IEE proc.-Electr. Power Appl, 2: 143-151 (Pubitemid 34434121)
41. Gao J D, Wang X H, Li F H (1993) Analysis of AC Machines and Their Systems, 1st Edition (in Chinese). Tsinghua University Press, Beijing
42. Gao J D, Wang X H, Li F H (2005) Analysis of AC Machines and Their Systems, 2nd Edition (in Chinese). Tsinghua University Press, Beijing
43. Wang X H, Chen S L, Wang W J, Sun Y G Xu L Y (2002) A Study of Armature Winding Internal Faults for Turbogenerators. IEEE Trans. on IA, 3: 625-631
44. Kulig T S, Buckly G W, Lambreicht D and Liese M (1990) A new approach to determine transient generator winding and damper currents in case of internal and external faults and abnormal operation. IEEE Trans. Energy Conversion, 3: 70-78 (Pubitemid 20678476)
45. Franklin P W (1972) Theory of the 3-phase salient pole type generator with bridge rectifier output. J IEEE Trans. PAS-91(5): Part I, 1960-1967, Part II, 1968-1975
46. Gao J D (1963) AC machine transients and operating modes analysis (Chapter 2, 3, 4, 7, in Chinese). Science Press, Beijing
47. Gao J D, Zhang L Z (1982) Fundamental theory and analysis mothods of transients in electric machines, Vol 1 (Chapter 6 and Appendix 2, in Chinese). Science Press, Beijing
48. n Ed (Chapter 3 and Section 4.7, in Chinese). Tsinghua University Press, Beijing
49. Goodman E D (1984) Troque, voltage and current harmonics of shychronous machines. J IEEE Trans. IA-20(1): 209-215
50. Kirschbaum H S(1945) Transient electrical torque of turbine generators during short circuits and synchronizing. J AIEE Trans. Feb. 64: 65-70
51. Liu T, Wang X H (2000) Simulation of dynamic performance for cycloconverter-fed synchronous motor. Proc IPEMC'2000, Beijing, pp 676-679
52. Wang S M, Wang X H, Li Y X, Su P S (2002) Steady-state performance of synchronous generators with ac and dc connections considering saturation. IEEE Trans. on Energy Conversion 17: 176-182
53. Wong M C, Zhang L Z (1999) Analysis of asymmetric systems with harmonics and their compensation. Proc CICEM'99, International Academic Publishers, Xi'an, pp 946-949
54. Zhang L Z, Chen L F (1991) Analysis of subsynchronous resonance in a turbogenerator and its shstem using compensation capacitors. Proc CICEM, Huazhong University of Science and Technology Press, Wuhan, pp 104-108
55. Arthur R Bergen (1986) Power systems analysis. Prentice-Hall, London
56. Demello F P, Concordia C (1969) Concepts of synchronous machine stability as affected by excitation control. J IEEE Trans. PAS-88(4): 316-329
57. Gao J D (1963) AC machine transients and operating modes analysis (Chapter 4, 5, in Chinese). Science Press, Beijing
58. Gao J D, Zhang L Z (1982) Fundamental theory and analysis mothods of transients in electric machines (Chapter 7, 8, in Chinese). Science Press, Beijing
59. n Ed (Chapter 3, in Chinese). Tsinghua University Press, Beijing
60. Zhang L Z, Chen L F (1991) Analysis of subsynchronous resonance in a turbogenerator and its shstem using compensation capacitors. Proc CICEM, Huazhong University of Science and Technology Press, Wuhan, pp 104-108
61. Zhang L Z, Yao L (1996) Effect of transfoemer connection banks on analysis of a synchronous generator and its system during unsymmetrical faults. Proc ICEMA'96, International Academic Publishers, Harbin, pp 369-373