A novel lead imprinted polymer as the selective solid phase for extraction and trace detection of lead ions by flame atomic absorption spectrophotometry: Synthesis, characterization and analytical application

Arabian Journal of Chemistry

Volumn 10, Issue , 2017, Pages S2499-S2508

  Ebrahimzadeh, Homeira ^a   Behbahani, Mohammad ^a  

^a SHAHID BEHESHTI UNIVERSITY   (Iran)

Author keywords

Flame atomic absorption spectroscopy; Ion imprinted polymer; Lead; Water samples

Indexed keywords

ABSORPTION SPECTROSCOPY; ATOMIC ABSORPTION SPECTROMETRY; ATOMS; CHEMICAL DETECTION; DESORPTION; ETHYLENE; ETHYLENE GLYCOL; LEAD; METAL IONS; METALS; ORGANIC POLYMERS; POLYMERS; PYRIDINE; SORPTION; SPECTROMETERS; SYNTHESIS (CHEMICAL); TRACE ANALYSIS; WATER ABSORPTION;

ETHYLENE GLYCOL DIMETHACRYLATE; FLAME ATOMIC ABSORPTION SPECTROMETRY; FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY; FLAME ATOMIC ABSORPTION SPECTROSCOPY; FOURIER TRANSFORM INFRARED SPECTROMETER; ION IMPRINTED POLYMER; SORPTION AND DESORPTIONS; WATER SAMPLES;

EXTRACTION;

EID: 84885563130     PISSN: 18785352     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.arabjc.2013.09.017     Document Type: Article

References (43)

1. Anthemidis, A.N., Automatic sequential injection liquid–liquid micro-extraction system for on-line fame atomic absorption spectrometric determination of trace metal in water samples. Talanta 77 (2008), 541–545.
2. Babel, S., Kurniawan, T.A., Low-cost adsorbents for heavy metals uptake from contaminated water: a review. J. Hazard. Mater. B97 (2003), 219–243.
3. Bai, H., Zhou, Q., Xie, G., Xiao, J., Temperature-controlled ionic liquid–liquid-phase microextraction for the pre-concentration of lead from environmental samples prior to flame atomic absorption spectrometry. Talanta 80 (2010), 1638–1642.
4. Boonamnuayvitaya, V., Chaiya, C.Y., Tanthapanichakoon, W., Jarudilokkul, S., Removal of heavy metals by adsorbent prepared from pyrolyzed coffee residues and clay. Sep. Purif. Technol. 35 (2004), 11–22.
5. Carletto, J.S., Carasek, E., Welz, B., Hollow-fiber liquid–liquid–solid micro-extraction of lead in soft drinks and determination by graphite furnace atomic absorption spectrometry. Talanta 84 (2011), 989–994.
6. Chen, J.R., Xiao, S.M., Wu, X.H., Fang, K.M., Liu, W.H., Determination of lead in water samples by graphite furnace atomic absorption spectrometry after cloud point extraction. Talanta 67 (2005), 992–996.
7. 2 matrix. J. Environ. Sci. 21 (2009), 1722–1729.
8. Ensafi, A.A., Zendegi, Shiraz A., On-line separation and preconcentration of lead(II) by solid–phase extraction using activated carbon loaded with xylenol orange and its determination by flame atomic absorption spectrometry. J. Hazard. Mater. 150 (2008), 554–559.
9. 2+ ions. Materials science and engineering: C-materials for biological applications. Mater. Sci. Eng., C 29 (2009), 2464–2470.
10. Ghaedi, M., Tavallali, H., Preconcentration and determination of zinc and lead ions by a combination of cloud point extraction and flame atomic absorption spectrometry. Clean: Soil, Air, Water 37 (2009), 328–333.
11. Godelitsas, A., Armbruster, T., HEU-type zeolites modified by transition elements and lead. Microporous Mesoporous Mater. 61 (2003), 3–24.
12. Huang, C.P., Chung, Y.C., Liou, M.R., Adsorption of Cu(II) and Ni(II) by pelletized biopolymer. J. Hazard. Mater. 45 (1996), 265–277.
13. 3+ on natural clinoptilolite: selectivity determination and influence of acidity on metal uptake. J. Colloid Interface Sci. 261 (2003), 49–54.
14. Karaaslan, N.M., Senkal, B.F., Cengiz, E., Yaman, M., Novel polymeric resin for solid phase extraction and determination of lead in waters. Clean: Soil, Air, Water 38 (2010), 1047–1054.
15. Kozlowski, C.A., Walkowiak, W., Girek, T., Modified cyclodextrin polymers as selective ion carriers for Pb(II) separation across plasticized membranes. J. Membr. Sci. 310 (2008), 312–320.
16. Krishnamurthy, S., Extraction and recovery of lead species from soil. Environ. Prog. 11 (1992), 256–260.
17. Lee, M.Y., Shin, H.J., Lee, S.H., Park, J.M., Yang, J.W., Removal of lead in a fixed-bed column packed with activated carbon and crab shell. Sep. Sci. Technol. 33 (1998), 1043–1056.
18. 2+ ions from aqueous solutions by multiwalled carbon nanotubes. Carbon 41 (2003), 2787–2792.
19. Liu, C.H., Yi, Y.L., Zhang, D.G., Zhu, H.G., Yang, Y., Cadmium pollution of soil in the surrounding area of Huludao zinc plant. Chin. J. Soil Sci. 34 (2003), 326–329.
20. Liu, Y., Liu, Z., Wang, Y., Dai, J., Gao, J., Xie, J., Yan, Y., A surface ion-imprinted mesoporous sorbent for separation and determination of Pb(II) ion by flame atomic absorption spectrometry. Microchim. Acta 72 (2011), 309–317.
21. Luconi, M.O., Silva, M.F., Olsina, R.A., Fernandez, L.P., Cloud point extraction of lead in saliva via use of nonionic PONPE 7.5 without added chelating agents. Talanta 51 (2000), 123–129.
22. Manzoori, J.L., Amjadi, M., Abulhassani, J., Ultra-trace determination of lead in water and food samples by using ionic liquid-based single drop microextraction-electrothermal atomic absorption spectrometry. Anal. Chim. Acta 644 (2009), 48–52.
23. Masque, N., Marce, R.M., Borrull, F., Cormack, P.A.G., Sherrington, D.C., Synthesis and evaluation of a molecularly imprinted polymer for selective on-line solid–phase extraction of 4-nitrophenol from environmental water. Anal. Chem. 72 (2000), 4122–4126.
24. Mayes, A.G., Whitcombe, M.J., Synthetic strategies for the generation of molecularly imprinted polymers. Adv. Drug Delivery Rev. 57 (2005), 1742–1778.
25. Moullec, S.L., Truong, L., Montauban, C., Begos, A., Pichon, V., Bellier, B., Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric SPE sorbent and a molecularly imprinted polymer. J. Chromatogr. A 1139 (2007), 171–177.
26. Mullett, W.M., Martin, P., Pawliszyn, J., In-tube molecularly imprinted polymer solid–phase microextraction for the selective determination of propranolol. Anal. Chem. 73 (2001), 2383–2389.
27. Nagihan, M., Karaaslan, B., Senka, F., Cengiz, E., Yaman, M., Novel polymeric resin for solid phase extraction and determination of lead in waters. Clean: Soil, Air, Water 38 (2010), 1047–1054.
28. Otero-Romania, J., Moreda-Pineiroa, A., Bermejo-Barreraa, P., Martin-Esteban, A., Inductively coupled plasma-optical emission spectrometry/mass spectrometry for the determination of Cu, Ni, Pb and Zn in seawater after ionic imprinted polymer based solid phase extraction. Talanta 79 (2009), 723–729.
29. Pan, J., Wang, S., Zhang, R., A novel Pb(II)-imprinted IPN for selective preconcentration of lead from water and sediments. Intern. J. Environ. Anal. Chem. 86 (2006), 855–865.
30. Payehghadr, M., Yousefi, S., Morsali, A., Thermal, structural and solution studies of a new lead(II) coordination polymer with 4 Pb–C interactions. J. Organomet. Chem. 693 (2008), 2514–2518.
31. Rao, T.P., Kala, R., Daniel, S., Metal ion-imprinted polymers – novel materials for selective recognition of inorganics. Anal. Chim. Acta 578 (2006), 105–116.
32. Shamsipur, M., Raoufi, F., Sharghi, H., Solid phase extraction and determination of lead in soil and water samples using octadecyl silica membrane disks modified by bis[1-hydroxy-9,10-anthraquinone-2-methyl]sulfide and flame atomic absorption spectrometry. Talanta 52 (2000), 637–643.
33. Shamsipur, M., Fasihi, J., Khanchi, A., Hassani, R., Alizadeh, K., Shamsipur, H., A stoichiometric imprinted chelating resin for selective recognition of copper(II) ions in aqueous media. Anal. Chim. Acta 599 (2007), 294–301.
34. Silva, E.L., Roldan, P.D.S., Simultaneous flow injection preconcentration of lead and cadmium using cloud point extraction and determination by atomic absorption spectrometry. J. Hazard. Mater. 161 (2009), 142–147.
35. Soylak, M., Sara_oglu, S., T_zen, M., Mendil, D., Determination of trace metals in mushroom samples from kayseri Turkey. Food Chem. 92 (2005), 649–652.
36. Surme, Y., Narin, I., Soylak, M., Yuruk, H., Dogan, M., Determination of Lead(II) in Sediment and water Samples. Microchim. Acta 157 (2007), 193–199.
37. Tuzen, M., Saygi, K.O., Soylak, M., Novel solid phase extraction procedure for gold(III) on Dowex M 4195 prior to its flame atomic absorption spectrometric determination. J. Hazard. Mater. 156 (2008), 591–595.
38. Ulewicza, M., Szczygelska-Taob, J., Biernat, J.F., Selectivity of Pb(II) transport across polymer inclusion membranes doped with imidazole azothiacrown ethers. J. Membr. Sci. 344 (2009), 32–38.
39. Xie, Z.H., Xie, F.Z., Guo, L.Q., Lin, X.C., Chen, G.N., Thioacetamide chemically immobilized on silica gel as a solid phase extractant for the extraction and preconcentration of copper(II), lead(II), and cadmium(II). J. Sep. Sci. 28 (2005), 462–470.
40. Yadav, A.A., Khopkar, S.M., Liquid–liquid extraction of lead(II) with tributyl phosphate. Talanta 18 (1971), 833–837.
41. Yaman, M., Comprehensive comparison of trace metal concentrations in cancerous and non-cancerous human tissues. Curr. Med. Chem. 13 (2006), 2513–2525.
42. Zachariadis, G.A., Anthemidis, A.N., Bettas, P.G., Stratis, J.A., Determination of lead by on-line solid phase extraction using a PTFE micro-column and flame atomic absorption spectrometry. Talanta 57 (2002), 919–927.
43. Zhu, X., Cui, Y., Chang, X., Zou, X., Li, Z., Selective solid–phase extraction of lead(II) from biological and natural water samples using surface-grafted lead(II)-imprinted polymers. Microchim. Acta 164 (2009), 125–132.