THE EFFECT OF SILICON AND RETAINED AUSTENITE ON DIRECT-COOLED MICROALLOYED FORGING STEELS WITH BAINITIC MICROSTRUCTURES

37th Mechanical Working and Steel Processing Conference Proceedings

Volumn , Issue , 1996, Pages 455-462

  Bailey, A J ^a   Krauss, G ^b   Thompson, S W ^b   Szilva, W A ^a  

^a Chaparral Steel Co   (United States)

^b Department of Metallurgical and Materials Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AUSTENITE; BAINITE; BAINITIC TRANSFORMATIONS; CARBIDES; FERRITE; FRACTURE TOUGHNESS; MICROALLOYING; MORPHOLOGY; SILICON STEEL; STEEL METALLOGRAPHY; STRAIN HARDENING; TENSILE STRENGTH;

ACICULAR FERRITE; BAINITIC MICROSTRUCTURES; BAR STEEL; FORGING STEEL; FRACTURE SURFACES; HIGH-SILICON STEEL; RETAINED AUSTENITE; SI CONTENT; STABILITY DISTRIBUTIONS; TENSILE IMPACT;

MICROSTRUCTURE;

EID: 84885477762     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (23)

1. K.J. Grassl, S.W. Thompson and G. Krauss, "New Options for Steel Selection for Automotive Applications", SAE Technical Paper Series, International Congress and Exposition, Detroit, Michigan, February 27-March 3, 1989, pp. 1-13.
2. Woodhead, "Review of Principles of Microalloyed Bar and Forging Steels", Fundamentals of Microalloyed Forging Steels, ed. G. Krauss, The Metallurgical Society, 1986, pp. 3-17.
3. T.C. Tschanz, "Short Rod Fracture Toughness Testing of Bar Steels", M.S. Thesis T-3993 and SRC Research Report No. MT-SRC-090-022, Colorado School of Mines, Golden, CO, November, 1990.
4. K.J. Grassl, S.W. Thompson, D.K. Matlock, and G. Krauss, "Toughness of Medium-Carbon Forging Steels with Direct Cooled Bainitic Microstructures", Mechanical Working and Steel Processing Conference, 1989.
5. K. Sugimoto, M. Misu, M. Kobayashi, and H.Shirasawa, "Effects of Second Phase Morphology on Retained Austenite Morphology and Tensile Properties in a TRIP-aided Dual-phase Steel Sheet", ISIJ International, vol. 33 n7, 1993, pp. 775-782.
6. K. J. Grassl, "The Effects of Microstructure Type and Loading Rate on the Toughness of Forging Steels", M.S. Thesis T-3797 and SRC Research Report No. MT-SRC-089-042, Colorado School of Mines, Golden, CO, November, 1989.
7. M.L. Brandt and G.B. Olson, "Bainitic Stabilization of Austenite in Low Alloy Sheet Steels", Iron and Steel Maker, May 1993, pp. 55-60.
8. Y. Sakuma, O. Matsumura, and H. Takechi, "Mechanical Properties and Retained Austenite in Intercritically Heat-Treated Bainite-Transformed Steel and Their Variation with Si and Mn Additions", Metall. Trans. A, vol. 22A, February 1991, pp. 489-498.
9. N. Imai, N. Komatsubara, K. Kunishige, "Effects of Alloying Elements and Microstructure on the Stability of Retained Austenite in Low-Alloy TRIP Steels", Congress Book of Heat & Surface '92, The 8th International Congress on Heat Treatment of Materials, Kyoto, Japan, November 1992, pp. 25-28.
10. W.C. Jeong, D.K. Matlock, and G. Krauss, "Observation of Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-1.5Mn Steel with Ferrite-Bainite-Austenite Structure", Mater. Sci. Eng., vol. A165, 1993, pp. 1-8.
11. A.J. Nagy Bailey, "Effects of Silicon and Retained Austenite on Direct-Cooled Microalloyed Forging Steels with Bainitic Microstructures", M.S. Thesis T-4709 and SRC Research Report No. MT-SRC-095-009, Colorado School of Mines, Golden, CO, March, 1995.
12. ASTM E 975-84, "Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation", American Society for Testing and Materials, Philadelphia, PA, 1984.
13. C.F. Jatczak, J.A. Larson, S.W. Shin, Retained Austenite and Its Measurement by X-Ray Diffraction, Society of Automotive Engineers, Warrendale, PA, 1980, pp. 9-30, 44-55.
14. ASTM E 23-91, "Standard Test Methods for Notched Bar Impact Testing of Metallic Materials", American Society for Testing and Materials, Philadelphia, PA, 1991.
15. ASTM E 1304-89, "Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials", American Society for Testing and Materials, Philadelphia, PA, 1990.
16. A.J. Nagy, G. Krauss, D.K. Matlock, and S.W. Thompson, "The Effects of Silicon and Retained Austenite on Direct-Cooled Microalloyed Forging Steels with Non-Traditional Bainitic Microstructures", Proceedings of the 36th MWSP Conference of ISS-AIME, Vol. 32, 1995, pp. 271-277.
17. W.C. Jeong, D.K. Matlock, and G. Krauss, "Effects of Tensile Testing Temperature on Deformation and Transformation Behavior of Retained Austenite in a 0.14C-1.2Si-1.5Mn Steel with Ferrite-Bainite-Austenite Structure", Mater. Sci. Eng., v. A165, 1993, pp. 9-18.
18. G.B. Olson, "Transformation Plasticity and the Stability of Plastic Flow", Deformation. Processing and Structure, ed. G. Krauss, American Society for Metals, 1984, pp. 391-424.
19. G.B. Olson, M. Cohen, "Stress assisted Isothermal Martensite Transformations: Application to TRIP Steels", Metall. Trans. A, vol. 13A, Nov. 1982, pp. 1907-1913.
20. J.R. Patel, M. Cohen, "Criterion for the Action of Applied Stress in the Martensite Transformation", Acta. Metall., vol. 1, Sept. 1953, pp. 531-538.
21. G.B. Olson, M. Cohen, "Kinetics of Strain-induced Martensite Nucleation", Metall. Trans. A, vol. 6A, April 1975, pp. 791-795.
22. R.E. Reed-Hill, Physical Metallurgy Principles, third edition, PWS-Kent Publishing Co., Boston, Ma., 1992, pp. 538-560.
23. P.H. Adler, G.B. Olson, and W.S. Owen, "Strain Hardening of Hadfield Manganese Steel" Metal. Trans. A., v. 17A, October, 1986, pp. 1725-1737.