Use (and abuse) of strain based criteria in offshore pipeline technology

ASPECT 1996 - Advances in Subsea Pipeline Engineering and Technology

Volumn , Issue , 1996, Pages 135-153

  Vitali, L ^a   Torselletti, E ^a   Marchesani, F ^a   Bruschi, R ^a  

^a Snamprogetti SpA   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

OFFSHORE OIL WELL PRODUCTION; STRAIN; SUBMARINE PIPELINES; WATER PIPELINES;

ENGINEERING PRACTICES; HIGH TEMPERATURE AND PRESSURE; INTERNATIONAL CODES; OPERATING CONDITION; PIPELINE TECHNOLOGY; STATE-OF-THE-ART TECHNOLOGY; STRAIN-BASED DESIGN; STRESS-BASED DESIGNS;

SUBSEA ENGINEERING;

EID: 84885315102     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (58)

1. Bai Y., Igland R.T. and Moan T.: "Limit State of Pipes Under Tension and Bending"; Proc. of the 3rd Int. Offshore Mechanics and Polar Engineering Conf., Singapore 1993.
2. Blaker F. and Bmschi R.: "STATOIL Study Confirms Advanced Design for Condensate Pipeline"; Oil & Gas Journal, January 1 st 1990.
3. Boyle J.T.: "Plastic Design Concepts"; in Pressure Vessel Design Concepts and Principles, ed. by J. Spence and A.S. Tooth, E & FN SPOW, 1994.
4. Bruschi R. and Sotbergb T.: "Future Pipeline Design Philosophy - Framework"; Proc. of the 11th Int. Conf. of Offshore Mechanics and Arctic Engineering, Calgary 1992.
5. Bruschi R., Curti G., Marchesani F. and Torselletti E.: "The MASPUS Project: Methodologies for Adapting Submarine Pipelines to very Uneven Seabeds"; Proc. of the 12th Int. Conf. on Offshore Mechanics and Arctic Engineering, Glasgow, 1993.
6. Bruschi R., Dumitrescu A., Sintini L. and Tura F.: "Laying Large Diameter Pipelines in Deep Waters"; the 13th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, 1994 a.
7. Bruschi R., Curti G., Durnitrescu A. and Vitali L.: "Strength Criteria for Hot Pipelines Susceptible to Euler-bar Buckling"; the 3rd Int. Offshore Mechanics and Polar Eng. Conf., Osaka, 1994 b.
8. Bruschi R., Tura F.: "Offshore Pipeline Reliability"; Offshore Mediterranean Conference, Ravenna, 1995.
9. Bruschi R., Ercoli Malacari L., Torselletti E. and Vitali L.: "Concrete Coated Submarine Pipelines: Further Advances in Strain Concentration at Field Joints and Relevant Implications on Strain Based Design"; Offshore Technology Conference, OTC paper No. 7854, Houston, 1995 a.
10. Bruschi R., Monti P., Bolzoni G. and Tagliafem R.:"Finite Element Method as Numerical Laboratory for Analysing Pipeline Response Under Internal Pressure, Axial Load, Bending Moment", the 14th Int. Conf. of Offshore Mechanics and Arctic Engineering, Copenhagen, 1995 b.
11. Bruschi R., Spinazze' M., Tomassini D., Cuscuna' S. and Venzi S.:"Failure Modes for Pipelines in Landslides Areas"; the 14th Int. Conf. on Offshore Mechanics and Arctic Engineering, Copenhagen, 1995 c.
12. BS 8010: "Code of practice for Pipelines - Part 3, Subsea Pipelines: Design, Construction and installation"; British Standards Institution, 1993.
13. Clyne A.J. and Jones D.G.: "The Integrity of Transmission Pipelines Containing Circumferential Girth Weld Defects"; Pipeline Technology, Volume 11, R. Denys (Editor), Elsevier Science B.V., 1995.
14. Corona E., Shaw P.K. and Kyriakides S.: "Pipe Collapse Under Bending and External Pressure"; BEPICO Computer Program Manual, EMRL Report No. 8718, The University of Texas at Austin, September 1987.
15. Bmschi R., Spinané M., Vitali L. and Verley R.: "Lateral Snaking of Hot Pressurised Pipelines - Mitigation for Troll Oil Pipeline"; Proc. of the 15th Int. Conf. on Offshore Mechanics and Arctic Engineering, Florence, 1996.
16. Christensen C. and Ludwigsen P.B.: "The Deleterious Effect of Cathodic Protection on Mechanically Damaged Pipes"; Proc. of the 9th Int. Conf. on Osshore Mechanics and . Arctic Engineering, The Hague, 1989.
17. Denys R. and Glover A.G.: "Fracture Assessment of Overmatched and Undermatched Weld Metal Yield Strength"; PRCIEPRG Biennial Joint Technical Meeting on Linepipe Research, Houston, May 1993.
18. DNV: "Rule for Submarine Pipeline System"; Det Norske Veritas, Hmik, Norway, 1981 and 1996 (to appear).
19. Ellinas C.P. and Walker A..: "Limit State Philosophy in Pipeline Design"; 3rd Offshore Mechanics and Arctic Engineering Symposium, New Orleans, 1984.
20. Francis G.D. and Swidzinski M.A.H.: "Successful Corrosion Control in HPMT Environments", Seminar on Latest Advances in HPMT Field Development Technology, Aberdeen 1995.
21. Gresnigt A.M.: "Plastic Design of Buried Steel Pipelines in Settlement Areas"; HERON, The Netherlands, 1986.
22. Gresnigt A.M., Dijkstra O.D. and Van Rongen H.J.M.: "Design of Pipelines in High Strength Steel"; Proc. of the 4th Int. Offshore and Polar Engineering Conf., Osaka, 1994.
23. Gresnigt A.M., Van Foeken R.J. and Chen S.L.: "Effect of Local Buckling on Burst Pressure"; Proc. of the 6th - Int. Offshore and Polar Engineering Conf., Los Angeles CA, 1996.
24. Hopkins P. Pistone V. and Clyne A.: "A Study of the Behaviour of Defects in Pipeline Girth Weld, The Work of The European Pipeline Research Group"; Conf. on Pipeline Reliability, Calgary, 1992.
25. Hopkins P. and Denys R.: "The Background to The European Pipeline Research Group's Girth Weld Defect Limit"; American Gas Association, Linepipe Symposium, Houston, 1993 a.
26. Hopkins P. and Denys R.: "The European Pipeline Research Group's Guidelines on Acceptable Girth Weld Defects in Transmission Pipelines"; American Gas Association Linepipe Symposium, Houston, 1993 b.
27. Jiao G., Sotberg T., Bruschi R., Verley R. and Mohrk K.: "The SUPERB Project: Wall Thickness,Design Guideline for Pressure Containment of Offshore Pipelines"; Proc. of the 15th Int. Conf. on Offshore Mechanics and Arctic Engineering, Florence, 1996.
28. Jiao G., Sotberg T. and Bruschi R. : "Probabilistic Assessment of the Wall Thickness Requirement for Pressure Containment of Offshore Pipelines"; Proc. of the 12th Int. Conf. on Offshore Mechanics and Arctic Engineering, Calgary, 1992.
29. Klever F.J., Kyriakides S., Palmer A.: "Limit-state Design of High-temperature Pipelines"; Proc. of the 13th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, 1994.
30. Kim1 G.L., Sampath S.G., Popelar C.H., Johns T.g. and Sorenson J.E.: "The Inelastic Collapse and Buckling of Deep Water Pipelines Under Combined Moment, Pressure, and Axial Tension"; Summary Report to Deep Water Offshore Pipeline Group, Battelle Columbus Laboratories, Ohio, March 30, 1976.
31. Kyriakides S., Corona E., Babcock C.D. and Madhavan R.: "Factors Affecting Pipe Collapse, Phase 11"; Final Project Report PR-106-521, prepared for the American Gas Association, EMRL Report No. 8718, The University of Texas at Austin, August 1987.
32. Kyriakides S., Corona E. and Fischer F.J. : "On the Effect of UOE Manufacturing Process on the Collapse Pressure of Long Tubes", Offshore Technology Conference, OTC Paper n.6578, Houston 1991.
33. Lian B. and Denys R.: "The Characteristics of Modem High Strength Steel Weldments"; Proc. of the 10th Int. Conf. on Offshore Mechanics and Arctic Engineering, 1990.
34. Lund S., Bruschi R., Montesi M. and Sintini L. : "Laying Criteria versus Strain Concentration at Field Joints for Heavily Coated Pipes"; Proc. of the 13th Int. Conf. on Offshore Mechanics and Arctic Engineering, Glasgow 1993.
35. Miller A.G.: "Review of Limit Loads of Structures Containing Defects"; Int. Journal of Pressure Vessels & Piping, Vol. 32, No. 1-4, 1988.
36. Murphey C.E. and Langner C.G.: "Ultimate Pipe Strength Under Bending, Collapse and Fatigue"; Int. Conf. on Offshore Mechanics and Arctic Engineering, 1985.
37. NEN 3650: "Requirements for Steel Pipeline Transportation Systems"; Unofficial English Translation, 1993.
38. Parkins R.N.: "An Overview - Prevention and Control of Stress Corrosion Cracking"; Material Performance, 1985.
39. Pisarski H.G., Pheal R., Hadley I and Francis R.: "Integrity of Steel Pipe during Reeling"; Proc. of the 13th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, 1994.
40. Pistone V., Dodi F. and K. Gerhard: "Assessment of Girth Weld Defects in Transmission Pipelines in the Ductile to Brittle Transition Region"; Proc. of the 16th Int. Cod. on Offshore Mechanics and Arctic Engineering, Florence, 1996.
41. Schwenk W.: "Investigation into the Cause of Corrosion Cracking in High Pressure Gas Transmission Pipelines"; 3R International, 1994.
42. Shaw P. K. and Kyriakides S.: "Inelastic Analysis of Thin-Walled Tubes Under Cyclic Bending"; Int. J. of Solids Structures, Vol. 21, No. 11, 1985.
43. Shell: "Collapse of Offshore Pipelines - Seminar"; Shell Development Company, Houston - TX, 1990.
44. Sotberg T. and Bruschi R.: "Future Pipeline Design Philosophy - Framework"; Proc. of the 11th Int. Conf. on Offshore Mechanism and Arctic Engineering, Calgary 1992.
45. Sotberg T., Bruschi R. and Msrk K.: "The SUPERB Project: A New Safety Philosophy for Submarine Pipeline Design"; Proc. of the 16th Int. Conf. on Offshore Mechanics and Arctic Engineering, Florence, 1996.
46. Sriskandarajah T. and Mahendran I.K.: "Parametric Considerations of Design and Installation of Deepwater Pipelines"; The 10th European Seminar, Offshore Oil & Gas Pipeline Technology, London, 1987.
47. Sriskandarajah T. and Mahendran I.K.: "Critique of Offshore Pipelay Criteria and Effects on Pipeline Design"; Offshore Technology Conference, OTC Paper No. 6847, Houston 1992.
48. Sriskandarajah T., Sreetharan T. and Carmichael R.G.: "Technical Outline of High Strain Based Design for Marine Pipelines"; Proc. of the 4th Int. Offshore and Polar Engineering Conf., Los Angeles CA, 1996.
49. STATOIL: "Hotpipe - Project Handbook"; UodFelt - 96026, 1996.
50. Stephens D.R. and McComell D.P. (1985): "A Critical Comparison of Code Design Criteria for Offshore Pipeline Risers"; Proc. of the 4th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, 1985.
51. Stewart G.: "An Analytical Model to Predict the Burst Capacity of Pipelines"; Proc. of the 14th Int. Conf. on Offshore Mechanics and Arctic Engineering, 1994.
52. Tornkins B.: "High Strain Fatigue"; SIRIUS, M2001, Metal Fatigue, 1992.
53. Verley R.L.P., Lund S., Moshagen.H.: "Wall Thickness design for High Pressure Offshore Gas Pipelines", Proc. of the 13th Int. Conf. on Offshore Mechanics and Arctic Engineering, Houston, 1994.
54. Walker A.C., Williams K.A.J. and Wickha. A.H.S.: "The Application of Strain Based Design Methods to Achieve Cost Effective Subsea Pipelines"; Offshore Technology Conference, OTC Paper No. 82 19, Houston, 1996.
55. Willoughby A.A.: "A Survey of Plastic Collapse Solutions Used In Failure Assessment"; Welding Institute Report 1911-1982, 1982.
56. Wilkowski G.M. and Eiber R.J.; "Review of Fractu~eM echanics Approaches To Defining Critical Size Girth Weld Discontinuities"; Welding Research Council Bulletin 239, pp.-25.
57. Xia Z. and Ellyin F.: "Biaxial Ratcheting Under Strain or Stress-Controlled Axial Cycling with Constant Hoop Stress"; Trans of the ASME, J. of Applied Mechanics, Vol. 61, June 1994.
58. Zimmerman T.J.E., Stephens M.J., De Geer D.D. and Chen Q.: "Compressive Strain Limits for Buried Pipelines"; Proc. of the 14th International Conf. on Offshore Mechanics and Arctic Engineering, Copenhagen, 1995.