Importance of thermochemical pressurization in the dynamic weakening of the Longmenshan Fault during the 2008 Wenchuan earthquake: Inferences from experiments and modeling

Journal of Geophysical Research: Solid Earth

Volumn 118, Issue 8, 2013, Pages 4145-4169

  Chen, Jianye ^a,b   Yang, Xiaosong ^a   Duan, Qingbao ^a   Shimamoto, Toshi ^a   Spiers, Christopher J ^b  

^a INSTITUTE OF GEOLOGY   (China)

^b UTRECHT UNIVERSITY   (Netherlands)

Author keywords

coseismic slip modeling; permeability; thermal pressurization; Wenchuan earthquake

Indexed keywords

BRECCIA; COSEISMIC PROCESS; COUNTRY ROCK; DISPLACEMENT; EARTHQUAKE RUPTURE; FAULT GOUGE; FAULT ZONE; NUMERICAL MODEL; PERMEABILITY; PORE PRESSURE; SEISMICITY; SEISMOLOGY; SICHUAN EARTHQUAKE 2008; SLIP; THERMOCHEMISTRY;

BEICHUAN; CHINA; LONGMENSHAN FAULT ZONE; SICHUAN;

EID: 84885129846     PISSN: 21699313     EISSN: 21699356     Source Type: Journal    
DOI: 10.1002/jgrb.50260     Document Type: Article

References (97)

1. Bayer, G., (1973), Thermal expansion anisotropy of oxide compounds, Proc. Br. Ceram. Soc., 22, 39-53.
2. Bernabé, Y., U. Mok, B. Evans, and, F. J. Herrmann, (2004), Permeability and storativity of binary mixtures of high- and low-permeability materials, J. Geophys. Res., 109, B12207, doi: 10.1029/2004JB003111.
3. Bernabé, Y., U. Mok, and, B. Evans, (2006), A note on the oscillating flow method for measuring rock permeability, Int. J. Rock Mech. Min. Sci., 43, 311-316. (Pubitemid 43055529)
4. Birch, F., (1966), Compressibility: Elastic constants, in Handbook of Physical Constants, edited by, D. P. Clark, Jr., Geol. Soc. Amer. Mem., 97, pp. 97-174.
5. Bizzarri, A., and, M. Cocco, (2006), A thermal pressurization model for the spontaneous dynamic rupture propagation on a three-dimensional fault: 1. Methodological approach, J. Geophys. Res., 111, B05303, doi: 10.1029/2005JB003862.
6. Brace, W. F., J. B. Walsh, and, W. T. Frangos, (1968), Permeability of granite under high pressure, J. Geophys. Res., 73, 2225-2236.
7. Brantut, N., A. Schubnel, J.-N. Rouzaud, F. Brunet, and, T. Shimamoto, (2008), High-velocity frictional properties of a clay-bearing fault gouge and implications for earthquake mechanics, J. Geophys. Res., 113, B10401, doi: 10.1029/2007JB005551.
8. Brantut, N., A. Schubnel, J. Corvisier, and, J. Sarout, (2010), Thermochemical pressurization of faults during coseismic slip, J. Geophys. Res., 115, B05314, doi: 10.1029/2009JB006533.
9. Brantut, N., R. Han, T. Shimamoto, N. Findling, and, A. Schubnel, (2011), Fast slip with inhibited temperature rise due to mineral dehydration: Evidence from experiments on gypsum, Geology, 39 (1), 59-62.
10. Bray, H. J., and, S. A. T. Redfern, (1999), Kinetics of dehydration of Ca-montmorillonite, Phys. Chem. Miner., 26, 591-600, doi: 10.1007/s002690050223. (Pubitemid 30003502)
11. Caine, J. S., J. P. Evans, and, C. B. Forster, (1996), Fault zone architecture and permeability structure, Geology, 24, 1025-1028.
12. Chen, J., and, X. Yang, (2012), The permeability of earthquake fault, Earth Sci. Front., 19 (4), 30-40. (in Chinese with English abstract)
13. Chen, J., X. Yang, J. Dang, C. He, Y. Zhou, and, S. Ma, (2011), Internal structure and permeability of Wenchuan earthquake fault, Chinese J. of Geophys, 54 (7), 1805-1916. (in Chinese with an English abstract)
14. Chen, J., X. Yang, S. Ma, and, C. J. Spiers, (2013), Mass removal and clay mineral de/re-hydration in carbonate-rich portions of the Wenchuan earthquake fault: Geochemical evidence and implications for fault zone evolution and coseismic slip, J. Geophys. Res. Solid Earth, 118, doi: 10.1002/jgrb.50089.
15. 2 pressure on the thermal decomposition kinetics of calcium carbonate, Thermochim. Acta, 254, 121-127.
16. Dang, J., Y. Zhou, L. Hang, C. He, J. Chen, X. Dang, and, X. Yang, (2012), Fault gouge in carbon mudstone at outcrops of Bajiaomiao and Shenxigou in Hongkou, Seismology and Geology, 34 (1), 17-27. (in Chinese with English abstract)
17. David, C., T.-f. Wong, W. Zhu, and, J. Zhang, (1994), Laboratory measurement of compaction- induced permeability change in porous rocks: Implications for the generation and maintenance of pore pressure excess in the crust, Pure Appl. Geophys., 143, 425-456.
18. de Lorenzo, S., and, M. Lpddo, (2010), Effect of frictional heating and thermal advection on pre-seismic sliding: A numerical simulation using a rate-, state- and temperature-dependent friction law, J. Geodyn., 49 (1), 1-13.
19. De paola, N., T. Hirose, and, T. Mitchell, (2011), Fault lubrication and earthquake propagation in thermally unstable rocks, Geology, 39 (1), 35-38.
20. Di Toro, G., D. Goldsby, and, T. E. Tullis, (2004), Friction falls towards zero in quartz rock as slip velocity approaches seismic rates, Nature, 427, 436-439. (Pubitemid 38168494)
21. Di Toro, G., R. Han, T. Hirose, N. De Paola, S. Nielsen, K. Mizoguchi, F. Ferri, M. Cocco, and, T. Shimamoto, (2011), Fault lubrication during earthquakes, Nature, 471, 493-499.
22. Famin, V., S. Nakashima, A.-M. Boullier, K. Fujimoto, and, T. Hirono, (2008), Earthquakes produce carbon dioxide in crustal faults, Earth Planet. Sci. Lett., 265 (3-4), 487-497.
23. Faulkner, D. R., and, E. H. Rutter, (2000), Comparison of water and argon permeability in natural clay-bearing fault gouge under high pressure at 20°C, J. Geophys. Res., 105, 16,415-16,427.
24. Faulkner, D. R., T. M. Mitchell, J. Behnen, T. Hirose, and, T. Shimamoto, (2011), Stuck in the mud? Earthquake nucleation and propagation through accretionary forearcs, Geophys. Res. Lett., 38, L18303, doi: 10.1029/2011GL048552.
25. Ferri, F., G. Di Toro, T. Hirose, and, T. Shimamoto, (2010), Evidence of thermal pressurization in high-velocity friction experiments on smectite-rich gouges, Terra Nova, 22 (5), 347-353.
26. Fine, R. A., and, F. J. Millero, (1973), Compressibility of water as a function of temperature and pressure, J. Chem. Phys., 59 (10), 5529-5536, doi: 10.1063/1.1679903.
27. Fischer, G. J., and, M. S. Paterson, (1992), Measurement of permeability and storage capacity in rocks during deformation at high temperature and pressure, in Fault Mechanics and Transport Properties of Rocks, edited by, B. Evans, and, T.-F. Wong, pp. 187-211, Academic Press, New York.
28. Goldsby, D. L., and, T. E. Tullis, (2011), Flash heating leads to low frictional strength of crustal rocks at earthquake slip rates, Science, 334, 216-218.
29. Hamada, Y., T. Hirono, W. Tanikawa, W. Soh, and, S.-R. Song, (2009), Energy taken up by co-seismic chemical reactions during a large earthquake: An example from the 1999 Taiwan Chi-Chi earthquake, Geophys. Res. Lett., 36, L06301, doi: 10.1029/2008GL036772.
30. Han, R., T. Shimamoto, T. Hirose, J. Ree, and, J. Ando, (2007), Ultralow friction of carbonate faults caused by thermal decomposition, Science, 316, 878-881. (Pubitemid 46764275)
31. Han, R., T. Hirose, and, T. Shimamoto, (2010), Strong velocity weakening and powder lubrication of simulated carbonate faults at seismic slip rates, J. Geophys. Res., 115, B03412, doi: 10.1029/2008JB006136.
32. Hirono, T., et al. (2006), Evidence of frictional melting from disk-shaped black material, discovered within the Taiwan Chelungpu fault system, Geophys. Res. Lett., 33, L19311, doi: 10.1029/2006GL027329.
33. Hirono, T., et al. (2008), Clay mineral reactions caused by frictional heating during an earthquake: An example from the Taiwan Chelungpu fault, Geophys. Res. Lett., 35, L16303, doi: 10.1029/2008GL034476.
34. Hirose, T., and, M. Bystricky, (2007), Extreme dynamic weakening of faults during dehydration by coseismic shear heating, Geophys. Res. Lett., 34, L14311, doi: 10.1029/2007GL030049.
35. Hirose, T., and, T. Shimamoto, (2005), Growth of molten zone as a mechanism of slip weakening of simulated faults in gabbro during frictional melting, J. Geophys. Res., 110, B05202, doi: 10.1029/2004JB003207.
36. Hou, L., S. Ma, T. Shimamoto, J. Chen, L. Yao, X. Song, and, Y. Okimura, (2012), Internal structures and high-velocity frictional properties of a bedding-parallel carbonate fault at Xiaojiaqiao outcrop activated by the 2008 Wenchuan earthquake, Earthquake Sciences, 25, 197-217.
37. 2O-NaCl systems below 647 K: Assessment of experimental data and thermodynamic models, Chem. Geol., 238 (3-4), 249-267. (Pubitemid 46357257)
38. Huang, W. L., J. M. Longo, and, D. R. Pevear, (1993), An experimentally derived kinetic model for smectite-to-illite conversion and its use as a geothermometer, Clays and Clay Minerals, 41, 162-177. (Pubitemid 24418325)
39. Huang, W. L., W. A. Bassett, and, T. C. Wu, (1994), Dehydration and hydration of montmorillonite at elevated temperatures and pressures monitored using synchrotron radiation, Am. Mineral., 79, 683-691.
40. Ida, Y., (1972), Cohesive force across the tip of a longitudinal-shear crack and Griffith's specific surface energy, J. Geophys. Res., 77, 3796-3805.
41. Ikehara, M., et al. (2007), Low total and inorganic carbon contents within the Chelungpu fault, Geochem. J., 41, 391-396. (Pubitemid 350218551)
42. Kanamori, H., (1994), Mechanics of earthquakes, Ann. Rev. Earth Planet. Sci., 22, 207-237.
43. Ko, S.-C., D. L. Olgaard, and, T.-F. Wong, (1997), Generation and maintenance of pore pressure excess in a dehydrating system, 1 Experimental and microstructural observations, J. Geophys. Res., 102, 825-839.
44. Kranz, R. L., J. S. Saltzman, and, J. D. Blacic, (1990), Hydraulic diffusivity measurements on laboratory rock samples using an oscillating pore pressure method, Int. J. Rock Mech. Min. Sci., 27, 345-352.
45. Lachenbruch, A. H., (1980), Frictional heating, fluid pressure, and the resistance to fault motion, J. Geophys. Res., 85 (B11), 6097-6112.
46. Lin, X., F. Ying, and, N. Zheng, (1992), Techniques of X-ray Diffraction Analysis and Its Geological Application, pp. 119-131, Petroleum Industry Press, Beijing. (in Chinese with an English abstract)
47. s 8.0 Wenchuan earthquake faulting and its implication to the aftershock hazard, Chinese J. Geophys., 54 (4), 1002-1009. (in Chinese with English abstract)
48. Lockner, D. A., C. Morrow, D. Moore, and, S. Hickman, (2011), Low strength of deep San Andreas fault gouge from SAFOD core, Nature, 472, 82-85.
49. Ma, K.-F., et al. (2006), Slip zone and energetics of a large earthquake from the Taiwan Chelungpu-fault Drilling Project, Nature, 444, 473-476. (Pubitemid 44809062)
50. Marone, C., M. Cocco, E. Richardson, and, E. Tinti, (2009), The critical slip distance for seismic and aseismic fault zones of finite width, in Fault-Zone Properties and Earthquake Rupture Dynamics, International Geophysics Series, vol. 94, edited by, E. Fukuyama, pp. 135-162, Elsevier, New York.
51. Mase, C., and, L. Smith, (1985), Pore-fluid pressure and frictional heating on a fault surface, Pageoph, Pure Appl. Geophys., 122, 583-607.
52. Mizoguchi, K., and, T. Shimamoto, (2008), A combined thermal pressurization and high-velocity behavior Nojima fault gouge to infer slip-weakening of a fault. AOGS annual meeting, Abstract, 58-SE-A1507.
53. Mizoguchi, K., T. Hirose, T. Shimamoto, and, E. Fukuyama, (2007), Reconstruction of seismic faulting by high-velocity friction experiments: An example of the 1995 Kobe earthquake, Geophys. Res. Lett., 34, L01308, doi: 10.1029/2006GL027931.
54. Mizoguchi, K., T. Hirose, T. Shimamoto, and, E. Fukuyama, (2008), Internal structure and permeability of the Nojima fault, southwest Japan, J. Struct. Geol., 30, 513-524.
55. Mori, J. J., (2010), Temperature Measurements in the WFSD-1 Borehole Following the 2008 Wenchuan Earthquake, American Geophysical Union, fall annual meeting, San Francisco, T53E-03.
56. Noda, H., and, T. Shimamoto, (2005), Thermal pressurization and slip weakening distance of a fault: An example of the Hanaore fault, southwest Japan, Bull. Seismol. Soc. Am., 95 (4), 1224-1233, doi: 10.1785/0120040089. (Pubitemid 41300199)
57. Noyan, H., M. Önal, and, Y. Sarikaya, (2008), Thermal deformation thermo-dynamics of a smectite mineral, J. Therm. Anal. Calorim., 91, 299-303, doi: 10.1007/s10973-007-8260-z. (Pubitemid 351217020)
58. Ohnaka, M., and, L.-F. Shen, (1999), Scaling of the rupture process from nucleation to dynamic propagation: Implications of geometric irregularity of the rupturing surfaces, J. Geophys. Res., 104, 817-844. (Pubitemid 29212564)
59. Pollastro, R. M., (1993), Considerations and applications of the illite/smectite geothermometer in hydrocarbon-bearing rocks of Miocene to Mississippian age, Clay and Clay minerals, 4 (2), 119-133. (Pubitemid 24419135)
60. Reches, Z., and, D. A. Lockner, (2010), Fault weakening and earthquake instability by power lubrication, Nature, 467, 452-455.
61. Rice, J. R., (1999), Flash heating at asperity contacts and rate-dependent friction, Eos. Trans. AGU, 80 (46), Fall Meet. Suppl., F681.
62. Rice, J. R., (2006), Heating and weakening of faults during earthquake slip, J. Geophys. Res., 111, B05311, doi: 10.1029/2005JB004006.
63. Sabirzyanov, A. N., R. A. Shagiakhmetov, F. R. Gabitov, A. A. Tarzimanov, and, F. M. Gumerov, (2003), Water solubility of carbon dioxide under supercritical and subcritical conditions, Theor. Found. Chem. Eng., 37 (1), 51-53, doi: 10.1023/A:1022256927236.
64. Saffer, D. M., and, C. Marone, (2003), Comparison of smectite- and illite-rich gouge frictional properties: Application to the updip limit of the seismogenic zone along subduction megathrusts, Earth Planet. Sci. Lett., 215, 219-235. (Pubitemid 37257180)
65. Samuelson, J., D. Elsworth, and, C. Marone, (2009), Shear-induced dilatancy of fluid-saturated faults: Experiment and theory, J. Geophys. Res., 114, B12404, doi: 10.1029/2008JB006273.
66. Sawai, M., T. Shimamoto, and, T. Togo, (2012), Reduction in BET surface area of Nojima fault gouge with seismic slip and its implication for the fracture energy of earthquakes, J. Struct. Geol., 38, 117-138.
67. Segall, P., and, J. R. Rice, (2006), Does shear heating of pore fluid contribute to earthquake nucleation?, J. Geophys. Res., 111, B09316, doi: 10.1029/2005JB004129.
68. Shi, Y., and, C. Y. Wang, (1986), Pore pressure generation in sedimentary basins: Overloading versus aquathermal, J. Geophys. Res., 91 (B2), 2153-2162.
69. Sibson, R. H., (1975), Generation of pseudotachylyte by ancient seismic faulting, Geophys. J. Int., 43 (3), 775.
70. Sibson, R. H., (1977), Fault rocks and fault mechanisms, J. Geol. Soc., 133, 191-213.
71. Sibson, R. H., and, V. Toy, (2006), The habitat of fault-generated pseudotachylyte: Presence vs. absence of friction-melt, in Radiated Energy and the Physics of Faulting, Geophysical Monograph Series, edited by, R. Abercrombie, et al., vol. 170, pp. 153-166, AGU, Washington, D. C.
72. Sibson, R. H., F. Robert, and, H. Poulsen, (1988), High-angle reverse faults, fluid-pressure cycling and mesothermal gold-quartz deposits, Geology, 16, 551-555.
73. Smith, S. A. F., A. Billi, G. Di Toro, and, R. Spiess, (2011), Principal slip zones in limestone: Microstructural characterization and implications for the seismic cycle (Tre Monti fault, central Apennines, Italy), Pure Appl. Geophys., 168, 2365-2393.
74. Solum, J. G., S. H. Hickman, D. A. Lockner, D. E. Moore, B. A. van der Pluijm, A. M. Schleicher, and, J. P. Evans, (2006), Mineralogical characterization of protolith and fault rocks from the SAFOD Main Hole, Geophys. Res. Lett., 33, L21314, doi: 10.1029/2006GL027285.
75. Sulem, J., and, V. Famin, (2009), Thermal decomposition of carbonates in fault zones: Slip-weakening and temperature limiting effects, J. Geophys. Res., 114, B03309, doi: 10.1029/2008JB006004.
76. Sulem, J., P. Lazar, and, I. Vardoulakis, (2007), Thermo-poro-mechanical properties of clayey gouge and application to rapid fault shearing, Int. J. Numer. Anal. Meth. Geomech., 31, 523-540. (Pubitemid 46371854)
77. Tanaka, H., W. M. Chen, C. Y. Wang, K. F. Ma, N. Urata, J. Mori, and, M. Ando, (2006), Frictional heat from faulting of the 1999 Chi-Chi, Taiwan earthquake, Geophys. Res. Lett., 33, L16316, doi: 10.1029/2006GL026673.
78. Tanikawa, W., M. Sakaguchi, T. Hirono, W. Lin, W. Soh, and, S.-R. Song, (2009), Transport properties and dynamic processes in a fault zone from samples recovered from TCDP Hole B of the Taiwan Chelungpu Fault Drilling Project, Geochem. Geophys. Geosyst., 10, Q04013, doi: 10.1029/2008GC002269.
79. Tanikawa, W., H. Mukoyoshi, O. Tadai, T. Hirose, A. Tsutsumi, and, W. Lin, (2012), Velocity dependence of shear-induced permeability associated with frictional behavior in fault zones of the Nankai subduction zone, J. Geophys. Res., 117, B05405, doi: 10.1029/2011JB008956.
80. Togo, T., T. Shimamoto, S. Ma, and, T. Hirose, (2011), High-velocity frictional behavior of Longmenshan fault gouge from Hongkou outcrop and its implications for dynamic weakening of fault during 2008 Wenchuan earthquake, Earthquake Science, 24, 267-281.
81. Tsutsumi, A., and, T. Shimamoto, (1997), High-velocity frictional properties of gabbro, Geophys. Res. Lett., 24 (6), 699-702.
82. Ujiie, K., A. Tsutsumi, and, J. Kameda, (2011), Reproduction of thermal pressurization and fluidization of clay-rich fault gouges by high-velocity friction experiments and implications for seismic slip in natural faults, in Geology of the Earthquake Source: A Volume in Honor of Rick Sibson, edited by, A. Fagereng, et al., vol. 359, pp. 267-285, Geological Society, London.
83. Vredevoogd, M. A., D. D. Oglesby, and, S. K. Park, (2007), Fluid pressurization due to frictional heating on a fault at a permeability contrast, Geophys. Res. Lett., 34, L18304, doi: 10.1029/2007GL030754.
84. Vrolijk, P., and, B. van der Pluijm, (1999), Clay gouge, J. Struc. Geol., 21, 1039-1048.
85. Wibberley, C. A. J., (2002), Hydraulic diffusivity of fault gouge zones and implications for thermal pressurization during seismic slip, Earth Planets Space, 54, 1153-1171. (Pubitemid 40849468)
86. Wibberley, C. A. J., and, T. Shimamoto, (2005), Earthquake slip weakening and asperities explained by thermal pressurization, Nature, 436, 689-692. (Pubitemid 41117269)
87. Wong, T.-F., S.-C. Ko, and, D. L. Olgaard, (1997), Generation and maintenance of pore pressure excess in a dehydrating system 2. Theoretical analysis, J. Geophys. Res., 102 (B1), 841-852.
88. w 7.9, Wenchuan earthquake, China, Geology, 37 (6), 515-518.
89. Xu, Z., and, H. Li, (2010), New Results from the Wenchuan Earthquake Fault Scientific Drilling Project (WFSD), American Geophysical Union, fall annual meeting, San Francisco, Abstract T53E-01.
90. Yamaguchi, A., et al. (2011), Progressive illitization in fault gouge caused by seismic slip propagation along a megasplay fault in the Nankai Tough, Geology, 39 (11), 995-998.
91. Yang, T., J. Chen, H. Wang, and, H. Jin, (2012), Rock magnetic properties of fault rocks from the rupture of the 2008 Wenchuan earthquake, China and their implications: Preliminary results from the Zhaojiagou outcrop, Beichuan County (Sichuan), Tectonophysics, 530, 331-341.
92. Yao, L., S. Ma, T. Shimamoto, and, T. Togo, (2013), Structures and highvelocity frictional properties of the Pingxi fault zone in the Longmenshan fault system, Sichuan, China, activated during the 2008 Wenchuan earthquake, Tectonophysics, 599, 135-156.
93. Zhang, L., and, C. He, (2013), Frictional properties of natural gouges from Longmenshan fault zone ruptured during the Wenchuan Mw7.9 earthquake, Tectonophysics, 594, 149-164.
94. Zhang, P., X. Wen, Z. Shen, and, J. Chen, (2010), Oblique, high-angle, listric-reverse faulting and associated development of strain: The Wenchuan earthquake of May 12, 2008, Sichuan, China, Annu. Rev. Earth Planet. Sci., 38, 353-382.
95. Zhang, Y., W. Feng, L. Xu, C. Zhou, and, Y. Chen, (2009), Spatio-temporal rupture process of the 2008 great Wenchuan earthquake, Science in China (Series D: Earth Sciences), 52 (2), 145-154.
96. Zhou, X., (1993), Hydrogeochemical characteristics and formation of subsurface brines of deep aquifers in Longnu temple brine-bearing structure, Sichuan Basin, Geoscience, 7 (1), 83-92. (in Chinese with English abstract)
97. Zhou, Y., and, C. He, (2009), The rheological structures of crust and mechanics of high-angle reverse fault slip for Wenchuan Ms 8.0 earthquake, Chinese J. Geophys., 52 (2), 474-484. (in Chinese with English abstract).