Electrochemical effects of silane pretreatments containing cerium nitrate on cathodic disbonding properties of epoxy coated steel

Journal of Adhesion Science and Technology

Volumn 27, Issue 22, 2013, Pages 2411-2420

  Zaferani, Sadeq Hooshmand ^a   Peikari, Mahmood ^a   Zaarei, Davood ^b   Danaei, Iman ^a  

^a PETROLEUM UNIVERSITY OF TECHNOLOGY   (Iran)

^b ISLAMIC AZAD UNIVERSITY   (Iran)

Author keywords

adhesives; carbon steel; cathodic disbondment; coating

Indexed keywords

CARBON STEEL SUBSTRATES; CATHODIC DISBONDING; CATHODIC DISBONDMENT; CHROMATE CONVERSION COATINGS; ELECTROCHEMICAL EFFECTS; ENVIRONMENTAL-FRIENDLY; FUNCTIONALIZED SILANE; SILANE PRE-TREATMENTS;

ADHESION; ADHESIVES; CARBON STEEL; CHROMATE COATINGS; COATINGS; EPOXY RESINS; NITRATES; SUBSTRATES;

CERIUM;

EID: 84884834370     PISSN: 01694243     EISSN: 15685616     Source Type: Journal    
DOI: 10.1080/01694243.2013.779068     Document Type: Article

References (40)

1. Harun, MK, Marsh, J, and, Lyon, SB. 2005. The effect of surface modification on the cathodic disbondment rate of epoxy and alkyd coatings. Prog. Org. Coat. 54: 317-321. (Pubitemid 41562072)
2. Sørensena, PA, Dam-Johansena, K, Weinellb, CE, and, Kiila, S. 2010. Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces. Prog. Org. Coat. 68: 283-292.
3. Bajat, JB, Mišković-Stanković, VB, and, Kačarević-Popović, Z. 2008. Corrosion stability of epoxy coatings on aluminum pretreated by vinyltriethoxysilane. Corros. Sci. 50: 2078-2084.
4. Suegama, PH, de Melo, HG, Benedetti, AV, and, Aoki, IV. 2009. Influence of cerium (IV) ions on the mechanism of organosilane polymerization and on the improvement of its barrier properties. Electrochim. Acta. 54: 2655-2662.
5. Yang, L, Feng, J, Zhang, W, and, Qu, J. 2010. Film forming kinetics and reaction mechanism of γ-glycidoxypropyltrimethoxysilane on low carbon steel surfaces. Appl. Surf. Sci. 256: 6787-6794.
6. Kong, G, Lu, J, Zhang, S, Che, C, and, Wu, H. 2010. A comparative study of molybdate/silane composite films on galvanized steel with different treatment processes. Surf. Coat. Technol. 205: 545-550.
7. Tittarelli, F, and, Moriconi, G. 2010. The effect of silane-based hydrophobic admixture on corrosion of galvanized reinforcing steel in concrete. Corros. Sci. 52: 2958-2963.
8. Cieślik, M, Engvall, K, Pan, J, and, Kotarba, A. 2011. Silane-parylene coating for improving corrosion resistance of stainless steel 316L implant material. Corros. Sci. 53: 296-301.
9. Zhu, D, and, van Ooij, W. 2003. Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloride solution: part 2: mechanism for corrosion protection. Corros. Sci. 45: 2177-2197. (Pubitemid 36978434)
10. Franquet, A, Le Pen, C, Terryn, H, and, Vereecken, J. 2003. Effect of bath concentration and curing time on the structure of non-functional thin organosilane layers on aluminium. Electrochim. Acta. 48: 1245-1255.
11. Donley, MS, Mantz, RA, Khramov, AN, Balbyshev, VN, Kasten, LS, and, Gaspar, DJ. 2003. The self-assembled nanophase particle (SNAP) process: a nanoscience approach to coatings. Prog. Org. Coat. 47: 401-415.
12. Jovanović, ̌Z, Bajat, JB, Jančić-Heinemann, RM, Dimitrijević, M, and, Mišković-Stanković, VB. 2009. Methacryloxypropyltrimethoxysilane films on aluminium: electrochemical characteristics, adhesion and morphology. Prog. Org. Coat. 66: 393-399.
13. Trueba, M, and, Trasatti, SP. 2009. Pyrrole-based silane primer for corrosion protection of commercial Al alloys: Part I: synthesis and spectroscopic characterization. Prog. Org. Coat. 66: 254-264.
14. Brusciotti, F, Batan, A, De Graeve, I, Wenkin, M, Biessemans, M, Willem, R, Reniers, F, Pireaux, JJ, Piens, M, Vereecken, J, and, Terryn, H. 2010. Characterization of thin water-based silane pre-treatments on aluminium with the incorporation of nano-dispersed CeO 2 particles. Surf. Coat. Technol. 205: 603-613.
15. Wei, X, Ruilin, M, Chang, M, and, Tianlan, P. 2010. Study on corrosion resistance of the BTESPT silane cooperating with rare earth cerium on the surface of aluminum-tube. J. Rare Earths. 28: 117-122.
16. Kim, H, and, Jang, J. 2000. Corrosion protection and adhesion promotion for polyimide/copper system using silane-modified polymeric materials. Polymer. 41: 6553-6561. (Pubitemid 30333277)
17. Deflorian, F, Rossi, S, and, Fedrizzi, L. 2006. Silane pre-treatments on copper and aluminium. Electrochim. Acta. 51: 6097-6103. (Pubitemid 44223451)
18. Zucchi, F, Grassi, V, Frignani, A, Monticelli, C, and, Trabanelli, G. 2006. Influence of a silane treatment on the corrosion resistance of a WE43 magnesium alloy. Surf. Coat. Technol. 200: 4136-4143. (Pubitemid 43246092)
19. Zucchi, F, Frignani, A, Grassi, V, Balbo, A, and, Trabanelli, G. 2008. Organo-silane coatings for AZ31 magnesium alloy corrosion protection. Mater. Chem. Phys. 110: 263-268. (Pubitemid 351609162)
20. Montemor, MF, and, Ferreira, MGS. 2008. Analytical characterisation and corrosion behaviour of bis-aminosilane coatings modified with carbon nanotubes activated with rare-earth salts applied on AZ31 Magnesium alloy. Surf. Coat. Technol. 202: 4766-4774. (Pubitemid 351773130)
21. Pinto, R, Carmezim, MJ, Ferreira, MGS, and, Montemor, MF. 2010. A two-step surface treatment, combining anodisation and silanisation, for improved corrosion protection of the Mg alloy WE54. Prog. Org. Coat. 69: 143-149.
22. Mahdavian, M, and, Attar, MM. 2009. The effect of benzimidazole and zinc acetylacetonate mixture on cathodic disbonding of epoxy coated mild steel. Prog. Org. Coat. 66: 137-140.
23. Naderi, R, and, Attar, MM. 2010. The role of zinc aluminum phosphate anticorrosive pigment in Protective Performance and cathodic disbondment of epoxy coating. Corros. Sci. 52: 1291-1296.
24. Martinez, S, Valek Žulj, L, and, Kapor, F. 2009. Disbonding of underwater-cured epoxy coating caused by cathodic protection current. Corros. Sci. 51: 2253-2258.
25. Sørensen, PA, Dam-Johansen, K, Weinell, CE, and, Kiil, S. 2010. Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces. Prog. Org. Coat. 68: 70-78.
26. Rodŕ;guez, MT, Gracenea, JJ, Saura, JJ, and, Suay, JJ. 2004. The influence of the critical pigment volume concentration (CPVC) on the properties of an epoxy coating: part II. Anticorrosion and economic properties. Prog. Org. Coat. 50: 68-74.
27. Tang, PT, Bech-Nielsen, G, and, Moller, PM. 1997. Molybdate based passivation of zinc. Trans. Inst. Met. Finish. 75: 144-151.
28. Aramaki, K. 2001. Self-healing mechanism of an organosiloxane polymer film containing sodium silicate and cerium(III) nitrate for corrosion of scratched zinc surface in 0.5 M NaCl. Corros. Sci. 44: 1621-1632. (Pubitemid 34439906)
29. Lu, JT, Wu, HJ, Kong, G, Che, CS, and, Xu, QY. 2006. Corrosion resistance of silane film on hot-depped galvanized steel by molybdate post sealing. Trans. Nonferrous Met. Soc. China. 16: 17-20.
30. Trabelsi, W, Cecilio, P, Ferreira, MGS, and, Montemor, MF. 2005. Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates. Prog. Org. Coat. 54: 276-284. (Pubitemid 41562066)
31. Montemor, MF, Simões, AMP, and, Ferreira, MGS. 2002. Composition and corrosion behaviour of galvanised steel treated with rare earth salts. The effect of the cation. Prog. Org. Coat. 44: 111-120. (Pubitemid 34405887)
32. Montemor, MF, Simões, AMP, and, Ferreira, MGS. 2001. Composition and behaviour of cerium films on galvanised steel. Prog. Org. Coat. 43: 274-281. (Pubitemid 33125982)
33. Kasten, LS, Grant, JT, Grebasch, N, Voevodin, N, Arnold, FE, and, Donley, MS. 2001. An XPS study of cerium dopants in sol-gel coatings for aluminum 2024-T3. Surf. Coat. Technol. 140: 11-15. (Pubitemid 32424860)
34. Garcia-Heras, M, Morales, AJ, Casal, B, Galvan, JC, Radzki, S, and, Villegas, MA. 2004. Preparation and electrochemical study of cerium-silica sol-gel thin films. J. Alloys Compd. 380: 219-224.
35. Pepe, A, Aparicio, M, Ceŕe, S, and, Duŕan, A. 2004. Preparation and characterization of cerium doped silica sol-gel coatings on glass and aluminum substrates. J. Non-Cryst. Solids. 348: 162-171.
36. Leng, A, Streckel, H, and, Stratmann, M. 1999. The delamination of polymeric coatings from steel. Part 2: first stage of delamination, effect of type and concentration of cations on delamination, chemical analysis of the interface. Corros. Sci. 41: 579-597. (Pubitemid 29278135)
37. Danaee, I, Jafarian, M, Forouzandeh, F, Gobal, F, and, Mahjani, MG. 2008. Impedance spectroscopy analysis of glucose electro-oxidation on Ni-modified glassy carbon electrode. Electrochim. Acta. 53: 6602-6609.
38. Nematollahi, M, Heidarian, M, Peikari, M, Kassiriha, SM, Arianpouya, N, and, Esmaeilpour, M. 2010. Comparison between the effect of nanoglass flake and montmorillonite organoclay on corrosion performance of epoxy coating. Corros. Sci. 52: 1809-1817.
39. Allie, L, Thorn, J, and, Aglan, H. 2008. Evaluation of nanosilicate filled poly (vinyl chloride-co-vinyl acetate) and epoxy coatings. Corros. Sci. 50: 2189-2196.
40. Van Ooij, WJ, Zhu, D, Stacy, M, Seth, A, Mugada, T, Gandhi, J, and, Puomi, P. 2005. Corrosion protection properties of organofunctional silanes-an overview. Tsinghua Sci Technol. 10: 639-664. (Pubitemid 43044134)