SCC mitigation strategies in hot water

NACE - International Corrosion Conference Series

Volumn 1997-March, Issue , 1997, Pages

  Andresen, Peter L ^a  

^a GE GLOBAL RESEARCH   (United States)

Author keywords

Conceptual understanding; Fundamental modeling; High temperature water; Mitigation; Stainless steel; Stress corrosion cracking

Indexed keywords

BOILING WATER REACTORS; HIGH TEMPERATURE CORROSION; RESIDUAL STRESSES; STAINLESS STEEL; STEEL CORROSION;

BWR ENVIRONMENT; CONCEPTUAL FOUNDATIONS; CONCEPTUAL UNDERSTANDING; FUNDAMENTAL MODELS; HIGH-TEMPERATURE WATER; MITIGATION; MITIGATION STRATEGY; STRESS CORROSION;

STRESS CORROSION CRACKING;

EID: 84884709988     PISSN: 03614409     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Conference Paper

References (50)

1. F.P. Ford, D.F. Taylor, P.L. Andresen and R.G. Ballinger, "Corrosion Assisted Cracking of Stainless and Low Alloy Steels in LWR Environments", EPRI Contract RP2006-6, Report NP5064M, February 1987.
2. F.P. Ford & P.L. Andresen, "Development and Use of a Predictive Model of Crack Propagation in 304/316L, A533B/A508 and Inconel 600/182 in 288°C Water", 3rd Int. Conf. on Degradation of Mat'ls in Nuclear Power Industry, AIME, pp.789-800, 1988.
3. P.L. Andresen and F.P. Ford, "Life Prediction by Mechanistic Modelling and System Monitoring of Environmental Cracking of Fe and Ni Alloys in Aqueous Systems", Materials Science and Engineering, A103, pp.167-183, 1988.
4. F.P. Ford, P.L. Andresen, H.D. Solomon, G.M. Gordon, S. Ranganath, D. Weinstein, & R. Pathania, "Application of Water Chemistry Control, On-Line Monitoring and Crack Growth Rate Models for Improved BWR Materials Performance", Fourth Int Symp on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, pp. 4-26 to 4-51, 1990.
5. F.P. Ford and P.W. Emigh, Corr Sci 2, 8/9, 673-692, 1985.
6. F.P. Ford, P.L. Andresen, D. Weinstein & S. Ranganath, "SCC of Low Alloy Steels in High Temperature Water", Proc. Fifth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, ANS, 1991.
7. F.P. Ford and P.L. Andresen, "Corrosion Fatigue of A533B/A508 Pressure Vessel Steels in Water at 288°C", Proc. Third Intl. Atomic Energy Agency Specialists Mtg on Subcritical Crack Growth, Moscow, USSR, May 1990, NRC NUREG/CP-0112 (ANL-90/22), Vol. 1, p.105-124.
8. F.P. Ford and P.L. Andresen, "Stress Corrosion Cracking of A533B/Pressure Vessel Steels in Water at 288°C", Proc. Third Intl. Atomic Energy Agency Specialists Mtg on Subcritical Crack Growth, Moscow, USSR, May 1990, NRC NUREG/CP-0112 (ANL-90/22), Vol. 2, p.37-54.
9. P.L. Andresen, "Fracture Mechanics Data & Modeling of Environmental Cracking of Nickel-Base Alloys in High Temperature Water", Corrosion 47, 1991, p. 917-938.
10. P.L. Andresen, "Development of Data and Predictive Models for Environmental Cracking of Nickel Alloys in 288°C Water", Final Report on EPRI Contract RP2006-17, May 1991.
11. K.S. Brown, P.L. Andresen and G.M. Gordon, "Modeling of Creviced Alloy 600 Shroud Head Bolt SCC Field Experience", Proc. Life Prediction of Corrodible Structures, Hawaii, November 1991, NACE.
12. P.L. Andresen, F.P. Ford, S.M. Murphy, J.M. Perks, "State of Knowledge of Radiation Effects on Environmental Cracking in Light Water Reactor Core Materials", Invited Review Paper, Proc. Fourth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems, Jekyll Island, GA, August 1989, NACE, 1990, pp. 1-83 to 1-121, 1990.
13. P.L. Andresen, "Irradiation Assisted Stress Corrosion Cracking", in Book on Stress Corrosion Cracking, July 1991, Ed. R. Jones, ASM, to be published, March 1992.
14. F.P. Ford and P.L. Andresen, "Lifetime Prediction of Irradiation Assisted Stress Corrosion Cracking in 288°C Water. Part I: Development of Overall Modeling Approach", Proc. Life Prediction of Corrodible Structures, Cambridge, Sept. 1991, NACE.
15. F.P. Ford and P.L. Andresen, "Lifetime Prediction of Irradiation Assisted Stress Corrosion Cracking in 288°C Water. Part II: Application of Modeling to Laboratory and Field Data", Proc Life Prediction of Corrodible Structures, NACE, 1992.
16. P.L. Andresen, I.P. Vasatis & F.P. Ford, "Behavior of Short Cracks in Stainless Steel at 288°C", Paper #495, Corrosion/90, NACE, Houston, 1990.
17. P.L. Andresen & F.P. Ford, "Measurements, Relationships, and Application of Short Crack Growth Rates to Lifetime Prediction", Proc. Life Prediction of Corrodible Structures, Hawaii, November 1991, NACE.
18. P.L. Andresen, "Conceptual Similarities and Common Predictive Approaches for SCC in High Temperature Water Systems", Paper 96258, Corrosion/96, NACE, 1996.
19. T.M. Angeliu, P.L. Andresen, and M.L. Pollick, "Repassivation and Crack Propagation of Alloy 600 in 288°C Water", Paper 96086, Corrosion/96, NACE, 1996.
20. T.M. Angeliu and G.S. Was, "Creep and Intergranular Cracking of Ni-Cr-Fe Alloys in Argon at 360°C", Met. Trans, 25A, p.1169-1184, 1994.
21. J.K. Sung and G.S. Was, Corrosion, Nov. 1991, pp.824-834.
22. Y.J. Kim, L.W. Niedrach, M.E. Indig & P.L. Andresen, "Applications of Noble Metals in Coatings and Alloys for Light Water Reactors", Journal of Metals, Vol. 44, No. 2, p. 14-18, April 1992.
23. P.L. Andresen, "Noble Metal Alloys and Coatings for Mitigation of Stress Corrosion Cracking in BWRs", Paper 95412, Corrosion, NACE, 1995.
24. P.L. Andresen, "Application of Noble Metal Technology for Mitigation of Stress Corrosion Cracking in BWRs", Proc. Seventh Int Symp on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, p.563-578, 1995.
25. F.P. Ford and P.L. Andresen, "Corrosion in Nuclear Systems: Environmentally Assisted Cracking in Light Water Reactors", in "Corrosion Mechanisms", Ed. P. Marcus and J. Ouder, Marcel Dekker, p.501-546, 1994.
26. D.F. Taylor & C.A. Caramihas, Proc. Conf. on Localized Crack Chemistry and Mechanics of Environmentally Assisted Cracking, AIME, Philadelphia, 1984, p.105-116.
27. D.F. Taylor & C.C. Foust, Corrosion 44, 1988, p.204-208.
28. P.L. Andresen, "Modelling of Water and Material Chemistry Effect on Crack Tip Chemistry and Resulting Crack Growth Rate Kinetics", Proc. Third Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, TMS-AIME, 1988, pp.301-312.
29. M. Psaila-Dombrowski, "Modeling of Crack and Crevice Chemistry in LWR Environments", Ph.D. Thesis, Dept. of Nuclear Eng., MIT, February 1990.
30. G. Gabetta, Fatigue of Eng. Matls & Structures, Vol. 5. No. 3, pp.215-220, 1982.
31. W.E. Rüther, W.K. Soppet, G. Ayrault & T.F. Kassner, Corrosion 40, p.518, 1984.
32. See also "Environmentally Assisted Cracking in Light Water Reactors", NRC NUREG/CR-4667 Vol.1 & II, Argonne Nat Labs ANL-86-31 & ANL-86-37, 1986.
33. P.L. Andresen, "Effects of Specific Anionic Impurities on Environmental Cracking of Austenitic Materials in 288°C Water", Proc. Fifth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, ANS, 1992, p.209-218.
34. R.B. Rebak, A.R. Mcllree & Z. Szklarska-Smialowska, Proc. Fifth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems, ANS, p.511-517, 1992.
35. P. Combrade, M. Foucault, P. Marcus, J.-M. Grimai & A. Gelpi, Proc. Fourth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems, NACE, pp.5-79 to 5-95, 1990.
36. P. Combrade, M. Foucault, P. Marcus & G. Slama, Proc. Fourth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems, NACE, pp. 8-48 to 8-63, 1990.
37. S. Moriya, S. Takata & T. Shoji, Proc. Sixth Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems, AIME, p.61-69, 1994.
38. R.B. Rebak & Z. Szklarska-Smialowska, Corrosion 47, p.754-757, 1991.
39. G. Economy, R.J. Jacko & F.W. Pement, Corrosion 43, p.727-734, 1987.
40. N. Totsuka & Z. Szklarska-Smialowska, Corrosion 43, p.734-738, 1987.
41. Y.J. Kim, C.C. Lin & R. Pathania, Proc. Water Chemistry of Nuclear Reactor Systems 6, v.1, p. 139-143, 1992. Also, Paper 93621, Corrosion/93, NACE, 1993.
42. P.L. Andresen: Effect of Flow Rate on Crack Initiation & Propagation', EPRI Proposal, Aug. 1994.
43. D.D. Macdonald & M. Urquidi-Macdonald, "A Coupled Environment Model for Stress Corrosion Cracking in Sensitized Type 304 SS in LWR Environments", Corrosion Science 32, 1991, p. 51.
44. T.M. Angeliu and P.L. Andresen, "Effect of Zn Additions on the Oxide Rupture Strain and Repassivation Kinetics of Fe-base Alloys in 288°C Water", Corrosion 52, p.28-35, 1996.
45. P.L. Andresen and C.L. Briant, "Role of S, P and N Segregation on Intergranular Environmental Cracking of Iron and Nickel Base Alloys in High Temperature Water", Proc. Third Int. Conf. Degradation of Materials in Nuclear Power Industry - Water Reactors, TMS-AIME, 1989, pp.371-382.
46. S.M. Bruemmer & C.H. Henager, "Microstructure, Microchemistry and Microdeformation of Alloy 600 Tubing", Proc. Second Int Symp on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, ANS, p.293-300, 1986.
47. S. Hettiarachchi, G.P. Wozadlo, T.P. Diaz, P.L. Andresen and R.L. Cowan, "The Concept of Noble Metal Addition Technology for IGSCC Mitigation of Nuclear Materials", Proc. Seventh Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, p.735-746, 1995.
48. P.L. Andresen and L.M. Young, "Characterization of the Roles of Electrochemistry, Convection and Crack Chemistry in Stress Corrosion Cracking", Proc. Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, p.579-596, 1995.
49. P.L. Andresen and Y.J. Kim, "Insulated Protective Coatings for Efficient Reduction of Corrosion Potential and SCC in High Temperature Water", Int. Coop. Group on IASCC, Sapporo, April 1995.
50. P.L. Andresen, "The Effects of Nitrate on the Stress Corrosion Cracking of Sensitized Stainless Steel in High Temperature Water", Proc. Seventh International Symposium on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, NACE, p.609-620, 1995.