Hybrid confinement of concrete by fiber-reinforced polymer sheets and fiber ropes under cyclic axial compressive loading

Journal of Composites for Construction

Volumn 17, Issue 5, 2013, Pages 732-743

  Rousakis, Theodoros C ^a  

^a DEMOCRITUS UNIVERSITY OF THRACE   (Greece)

Author keywords

Cyclic compression; Fiber rope; Hybrid; Overloads; Strengthening

Indexed keywords

AXIAL COMPRESSIVE LOADING; CYCLIC COMPRESSION; FIBER REINFORCED POLYMERS; FIBER ROPES; FIBER-REINFORCED POLYMER SHEETS; GLASS FIBER REINFORCED POLYMER (GFRP); HYBRID; OVERLOADS;

CONCRETES; ENERGY DISSIPATION; FIBER REINFORCED PLASTICS; MOORING CABLES; POLYMERS; POLYPROPYLENES; STATISTICAL TESTS; STRENGTHENING (METAL);

FIBERS;

EID: 84884663149     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000374     Document Type: Article

References (30)

1. American Concrete Institute (ACI). (2008). " Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures." ACI 440.2R-08, Detroit, 76.
2. Anggawidjaja, D., Ueda, T., Dai, J., and, Nakai, H. (2006). " Deformation capacity of RC piers by new fiber-reinforced polymer with large fracture strain." Cem. Concr. Compos., 28 (10), 914-927. CCOCEG 0958-9465 10.1016/j.cemconcomp.2006.07.011
3. Bournas, B. A., Lontou, P. V., Papanicolaou, C. G., and, Triantafillou, T. C. (2007). " Textile- reinforced mortar (TRM) versus FRP confinement in reinforced concrete columns." ACI Struct. J., 104 (6), 740-748. ASTJEG 0889-3241
4. Chen, J. F., Li, S. Q., Bisby, L. A., and, Ai, J. (2011). " FRP rupture strains in the split-disk test." Compos. Part B, 42 (4), 962-972. CPBEFF 1359-8368 10.1016/j.compositesb.2010.12.015
5. Dai, J., Bai, Y., and, Teng, J. G. (2011). " Behavior and modeling of concrete confined with FRP composites of large deformability." J. Compos. Constr., 15 (6), 963-973. JCCOF2 1090-0268 10.1061/(ASCE)CC.1943-5614. 0000230
6. De Caso y Basalo, F., Matta, F., and, Nanni, A. (2011). " Novel test method for ultimate hoop-strain characterization in FRP jackets." J. Mater. Civ. Eng., 23 (12), 1633-1641. JMCEE7 0899-1561 10.1061/(ASCE)MT.1943- 5533.0000333
7. De Caso y Basalo, F., Matta, F., and, Nanni, A. (2012). " Fiber reinforced cement-based composite system for concrete confinement." Constr. Build. Mater., 32, 55-65. 0950-0618 10.1016/j.conbuildmat.2010.12.063
8. De Lorenzis, L., and, Tepfers, R. (2003). " Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites." J. Compos. Constr., 7 (3), 219-234. JCCOF2 1090-0268 10.1061/(ASCE)1090-0268(2003)7:3(219)
9. Fardis, M. N., and, Khalili, H. (1981). " Concrete encased in fibreglass-reinforced- plastic." Proc.-Am. Concr. Inst., 78 (6), 440-446.
10. Hu, Y. M., Yu, T., and, Teng, J. G. (2011). " FRP-confined circular concrete-filled thin steel tubes under axial compression." J. Compos. Constr., 15 (5), 850-860. JCCOF2 1090-0268 10.1061/(ASCE)CC.1943-5614.0000217
11. Karabinis, A. I., and, Rousakis, T. C. (2002). " Concrete confined by FRP material: A plasticity approach." Eng. Struct. J., 24 (7), 923-932. 10.1016/S0141-0296(02)00011-1
12. Liang, M., Wu, Z., Ueda, T., Zheng, J., and, Akogbe, R. (2012). " Experiment and modeling on axial behavior of carbon fiber reinforced polymer confined concrete cylinders with different sizes." J. Reinf. Plast. Compos., 31 (6), 389-403. JRPCDW 0731-6844 10.1177/0731684412439347
13. Matthys, S., Toutanji, H., and, Taerwe, L. (2006). " Stress-strain behavior of large-scale circular columns confined with FRP composites." J. Struct. Eng., 132 (1), 123-133. JSENDH 0733-9445 10.1061/(ASCE)0733-9445(2006) 132:1(123)
14. Mirmiran, A., Shahawy, M., Samaan, M., El Echary, H., Mastrapa, J. C., Pico, O. (1998). " Effect of columns parameters on FRP-confined concrete." J. Compos. Constr., 2 (4), 175-185. JCCOF2 1090-0268 10.1061/(ASCE)1090-0268(1998)2:4(175)
15. National Research Council (CNR), Advisory Committee on Technical Recommendations for Construction. (2004). " Guide for the design and construction of externally bonded FRP systems for strengthening existing structures." CNR-DT 200/2004, Rome.
16. Peled, A. (2007). " Confinement of damaged and nondamaged structural concrete with FRP and TRC sleeves." J. Compos. Constr., 11 (5), 514-522. JCCOF2 1090-0268 10.1061/(ASCE)1090-0268(2007)11:5(514)
17. Rousakis, T. C. (2001). " Experimental investigation of concrete cylinders confined by carbon FRP sheets, under monotonic and cyclic axial compressive load." Research Rep., Chalmers Univ. of Technology, Göteborg, Sweden.
18. Rousakis, T. (2013). " Elastic fiber ropes of ultra high extension capacity in strengthening of concrete through confinement." J. Mater. Civ. Eng. JMCEE7 0899-1561 10.1061/(ASCE)MT.1943-5533.0000796
19. Rousakis, T. C., and, Karabinis, A. I. (2008). " Substandard reinforced concrete members subjected to compression-FRP confining effects." Mater. Struct., 41 (9), 1595-1611. MASTED 1359-5997 10.1617/s11527-008-9351-4
20. Rousakis, T. C., and, Karabinis, A. I. (2012). " Adequately FRP confined reinforced concrete columns under axial compressive monotonic or cyclic loading." Mater. Struct., 45 (7), 957-975. MASTED 1359-5997 10.1617/s11527-011-9810-1
21. Rousakis, T. C., Karabinis, A. I., Kiousis, P. D., and, Tepfers, R. (2008). " Analytical modeling of plastic behaviour of uniformly FRP confined concrete members." Composites, Part B, 39 (7-8), 1104-1113. CPBEFF 1359-8368 10.1016/j.compositesb.2008.05.001
22. Rousakis, T. C., Rakitzis, T. D., and, Karabinis, A. I. (2012 a). " Design-oriented strength model for FRP confined concrete members." Compos. Constr., 16 (6), 615-625. 1090-0268 10.1061/(ASCE)CC.1943-5614.0000295
23. Rousakis, T. C., Rakitzis, T. D., and, Karabinis, A. I. (2012 b). " Empirical modeling of failure strains of uniformly FRP confined concrete columns." The 6th Int. Conf. on FRP Composites in Civil Engineering-CICE 2012, Int. Institute for FRP in Construction, Rome.
24. Scherer, J. (1999). " S&P-Sintecno, FRP-polymer fibers in strengthening." User guide, Brunnen.
25. Shimomura, T., and, Phong, N. H. (2007). " Structural performance of concrete members reinforced with continuous fiber rope." 8th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Concrete Structures (FRPRCS-8), Univ. of Patras, Patras, Greece.
26. Shin, M., and, Andrawes, B. (2011). " Lateral cyclic behavior of reinforced concrete columns retrofitted with shape memory spirals and FRP wraps." J. Struct. Eng., 137 (11), 1282-1290. JSENDH 0733-9445 10.1061/(ASCE)ST.1943-541X.0000364
27. Tamuzs, V., et al. (2006). " Behavior of concrete cylinders confined by carbon-composite tapes and prestressed yarns." Mech. Compos. Mater., 42 (1), 13-32. MCMAD7 0191-5665 10.1007/s11029-006-0013-8
28. Teng, J. G., Jiang, T., Lam, L., and, Luo, Y. Z. (2009). " Refinement of a design-oriented stress-strain model for FRP-confined concrete." J. Compos. Constr., 13 (4), 269-278. JCCOF2 1090-0268 10.1061/(ASCE)CC.1943-5614.0000012
29. Triantafillou, T. C., and, Papanicolaou, C. G. (2005). " Textile reinforced mortars (TRM) versus fiber reinforced polymers (FRP) as strengthening materials of concrete structures." Seventh Int. Symp. on FRP Reinforcement for Reinforced Concrete Structures (FRPRCS-7), SP230-6, American Concrete Institute, Kansas City, MO, 99-118.
30. Wie, Y., and, Wu, Y. (2012). " Unified stress-strain model of concrete for FRP-confined columns." Constr. Build. Mater., 26 (1), 381-392. 0950-0618 10.1016/j.conbuildmat.2011.06.037