A circuit model of a 5kW fuel cell

4th International Conference on Clean Electrical Power: Renewable Energy Resources Impact, ICCEP 2013

Volumn , Issue , 2013, Pages 447-452

  Boscaino, V ^a   Miceli, R ^a   Capponi, G ^a  

^a UNIVERSITY OF PALERMO   (Italy)

Author keywords

fuel cell; modeling; power converters; renewable energy sources

Indexed keywords

CIRCUIT MODELING; EMPIRICAL METHOD; FUEL CELL MODEL; HEAT-POWER GENERATION; MAXIMUM ABSOLUTE ERROR; PARAMETERS TUNING; POWER SYSTEM DESIGNS; RENEWABLE ENERGY SOURCE;

CIRCUIT SIMULATION; CIRCUIT THEORY; COMPUTER SIMULATION; DOMESTIC APPLIANCES; FUEL CELLS; HEATING; INDUSTRIAL RESEARCH; MODELS; NATURAL RESOURCES; POWER CONVERTERS; PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC);

RENEWABLE ENERGY RESOURCES;

EID: 84884610272     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICCEP.2013.6586898     Document Type: Conference Paper

References (36)

1. Di Tommaso A, Genduso F, Miceli R. "A Geometrical Simple Approach for Power Silicon Devices Fault Detection and Fault-Tolerant Operation of a Voltage Source Inverter|". In: 2012 XXth International Conference on Electrical Machines (ICEM 2012). p. 1524-1530, France, 2-5 Sept. 2012.
2. R. Rizzo, P. Tricoli, I. Spina: "An Innovative Reconfigurable Integrated Converter Topology suitable for the Distributed Generation", Energies, Vol. 5 n. 9, 2012, pp. 3640-3654.
3. V. Di Dio, G. Cipriani, R. Miceli, and R. Rizzo, "Design criteria of tubular linear induction motors and generators: a prototype realization and its characterization," Leonardo Electronic Journal of Practices and Technologies, vol. 12, 2013.
4. A. Dannier, R. Rizzo: "An overview of Power Electronic Transformer: Control strategies and topologies", Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2012, Sorrento, June 20-22, 2012, pp. 1552-1557.
5. L. Piegari, R. Rizzo, P. Tricoli: "A Comparison between Line-Start Synchronous Machines and Induction Machines in Distributed Generation", Prezglad Elektrotechniczny (Electrical Review), Vol. 88 n. 5b, 2012, pp. 187-193.
6. A. Emadi, Y.J. Lee, and K. Rajashakara, "Power electronics and motor drives in electric, hybrid electric and plug-in hybrid electric vehicles" IEEE Trans. Power Electron., vol. 55, no. 6, pp. 2237-2245, June 2008.
7. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Current-Sensing Technique for Current-Mode Controlled Voltage Regulator Modules". Microelectronics Journal, Elsevier, vol.39, no.12, pp.1852-1859, DOI: 10.1016/j.mejo.2008.05.015, Dec. 2008.
8. M. Pinuela, D.C. Yates, S. Lucyszyn, and P.D. Mitcheson, "Maximizing DC-to-Load efficiency for inductive power transfer", IEEE Trans. On Power Electron., vol. 28, no. 5, pp. 2437-2447, May 2013.
9. R.F. Xue, K.W. Chang, and M. Je, "High -efficiency wireless power transfer for biomedical implants by optimal resonant load transformation", IEEE Trans. Circ. and Sys. I, vol. 60, no. 4, pp. 867-874, Apr. 2013.
10. V. Boscaino, F. Pellitteri, G. Capponi, and R. La Rosa, " A Wireless battery charger Architecture for Consumer Electronics", in IEEE International Conference on Consumer Electronics, ICCE 2012, Germany, 2012, pp.84-88. Doi: 10.1109/ICCE-Berlin.2012.6336483.
11. R. Candela, V. Di Dio, E. Riva Sanseverino, and P. Romano, "Reconfiguration techniques of partial shaded PV systems for the maximization of electrical energy production," in 2007 International Con ference on Clean Electrical Power, ICCEP '07, 2007, pp. 716-719. (Pubitemid 47592399)
12. V. Cecconi, V. Di Dio, A. O. Di Tommaso, S. Di Tommaso, D. La Cascia, and R. Miceli, "Active power maximizing for wind electrical energy generating systems moved by a modular multiple blade fixed pitch wind turbine," in SPEEDAM 2008 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2008, pp. 1460 -1465.
13. G. Cipriani, V. Di Dio, D. La Cascia, R. Miceli, and R. Rizzo, "A novel approach for parameters determination in four lumped PV parametric model with operative range evaluations," International Review of Electrical Engineering (I.R.E.E.), vol. 8, Apr. 2013.
14. V. Di Dio, R. Miceli, C. Rando, and G. Zizzo, "Dynamics photovoltaic generators: Technical aspects and economical valuation," in SPEEDAM 2010 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010, pp. 635-640.
15. R. Inguanta, S. Piazza, C. Sunseri, A. Cino, V. Di Dio, D. La Cascia, R. Miceli, C. Rando, and G. Zizzo, "An electrochemical route towards the fabrication of nanostructured semiconductor solar cells," SPEEDAM 2010 - Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010, pp. 1166 -1171.
16. G. Cipriani, V. Di Dio, and G. Ricco Galluzzo, "A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede," SPEEDAM 2012 - Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2012, pp. 1142 -1147.
17. Di Tommaso A O, Genduso F, Miceli R, Ricco Galluzzo G. "Computer Aided Optimization Via Simulation Tools of Energy Generation Systems With Universal Small Wind Turbines". In: 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) 2012. Aalborg, Denmark, June 25-28 2012, p. 570-577, Piscataway (NJ):IEEE, ISBN: 978-1-4673-2022- 1, doi: 10.1109/PEDG.2012.6254059.
18. A. Andreotti, A. Del Pizzo, R. Rizzo, P. Tricoli, "An efficient architecture of a PV plant for ancillary service supplying", SPEEDAM 2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Pisa (Italy), 14-16 June 2010.
19. F. Massaro, L. Dusonchet, S. Favuzza, G. Morello "Analisi economico-finanziaria degli investimenti sul fotovoltaico in Italia". L'Energia Elettrica n. 03/09 maggio-giugno 2009 pp. 37-51 ISSN 0013-7308.
20. A. Dannier, L. Ferraro, R. Miceli, L. Piegari, R. Rizzo, "Numerical and Experimental Validation of a LiFePO4 Battery Model at Steady State and Transient Operations", Conference & Exhibition on Ecological Vehicles and Renewable Energies, Montecarlo, 27-30 March, 2013.
21. R.A. Dougal, S. Liu, and R.E. White, "Power and Life Extension of Battery- Ultracapacitor Hybrids" IEEE Trans. on Power Electron., 2002, vol. 25, no. 1, pp.120-131, March 2002.
22. V. Boscaino, G. Capponi, F. Marino, "Experimental test on a fuel cell-supercapacitor hybrid power supply for a digital still camera " IEEE International Universities Power Engineering Conference, UPEC'09, Scotland, 2009, p.1-5.
23. Z. Jiang, R.A. Dougal, and R. Leonard, "A Novel Digital Power Controller for Fuel Cell/Battery Hybrid Power Sources" in IEEE Int. App. Power Electron. Conf., APEC 2005, 6-10 March 2005, pp. 467-473.
24. V. Boscaino, M. Gaeta, G. Capponi, F. Marino, "Nonlinear digital control improving transient response: Design and test on a multiphase VRM," Symposium on Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010, pp.507-512, 14-16 June2010.
25. V. Boscaino, R. Collura, G. Capponi, and F. Marino, "A fuel cell - battery hybrid power supply for portable applications". Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM'10, Italy, 2010, pp.580-585.
26. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Linear-non- linear Digital Control for DC-DC Converters with Fast Transient Response", Int. Journ. of Power and Energy Sys., 2009, vol. 29, pp.38-47. Doi: 10.2316/Journal.203.2009.1.203-4021.
27. A. Askarzadeh and A. Rezazadeh, "An Innovative Global Harmony Search Algorithm for Parameter Identification of a PEM Fuel Cell Model", IEEE Trans. Ind. Electron., vol. 59, no. 9, pp. 3473 - 3480, Sept. 2012.
28. R. Chibante and D. Campos, " An experimentally optimized PEM fuel cell model using PSO algorithm", in Int. Symp. on Ind. Electron, ISIE'10, pp. 2281 - 2285.
29. V. Di Dio, D. La Cascia, R. Miceli, and R. Liga, "Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive". IEEE International Conference on Electrical Machines, ICEM'08, pp.1-6.
30. V. Boscaino, G. Capponi, P.Livreri, and F. Marino, "Fuel Cell Modelling for Power Supply Systems Design ". IEEE International Workshop on Control and Modeling for Power Electronics, COMPEL'08, Zurich, 2008. pp.1 -5. DOI:10.1109/COMPEL.2008.4634671.
31. C.A Ramos-Paja, R. Giral, L. Martinez-Salamero, J. Romano, A. Romero, and G. Spagnuolo, "A PEM Fuel- Cell Model Featuring Oxygen-Excess-Ratio Estimation and Power-Electronics Interaction ", IEEE Trans. Ind. Electron., vol. 57, pp. 1914-1924, 2010.
32. V. Boscaino, G. Capponi, and F. Marino, "FPGA implementation of a fuel cell emulator", Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM' 10, Italy, 2010, pp. 1297-1301.
33. X. Kong and A.M. Khambadkone, "Modeling of a PEM Fuel-Cell Stack for Dynamic and Steady-State Operation Using ANN-Based Submodels", IEEE Trans. Ind. Electron., vol. 56, pp. 4903-4914, 2009.
34. S. Nuccio, C. Spataro, G. Tinè: "Electromagnetic immunity of a portable PC-based measurement instrument", Proc. of IWADC 2003, Perugia, Italy, September 2003.
35. S. Nuccio, C. Spataro, G. Tinè: "Virtual instruments: Uncertainty evaluation in the presence of unknown electromagnetic interferences", Proc. of A MUEM 2008 - International Workshop on Advanced Methods for Uncertainty Estimation in Measurement - Trento, Italy, 21-22 July 2008, pp. 56-61.
36. C. Spataro: "ADC Based Measurements: a Common Basis for the Uncertainty Estimation", Proc. of 17th IMEKO - TC4 Symposium. Kosice, Slovakia. September, 08-10. 2010.