E-bike battery charging: Methods and circuits

4th International Conference on Clean Electrical Power: Renewable Energy Resources Impact, ICCEP 2013

Volumn , Issue , 2013, Pages 107-114

  Pellitteri, F ^a   Boscaino, V ^a   Di Tommaso, A O ^a   Genduso, F ^a   Miceli, R ^a  

^a UNIVERSITY OF PALERMO   (Italy)

Author keywords

inductive power transfer; vehicular and wireless technologies; wireless battery charging; wireless power transfer

Indexed keywords

INDUCTIVE COUPLINGS; INDUCTIVE POWER TRANSFER; POWER CONVERSION EFFICIENCIES; SPICE SIMULATIONS; SYSTEM ARCHITECTURES; VEHICULAR AND WIRELESS TECHNOLOGIES; WIRELESS POWER TRANSFER; WIRELESS SOLUTIONS;

CHARGING (BATTERIES); COMPUTER SIMULATION; COUPLED CIRCUITS; ELECTROMAGNETIC INDUCTION; INDUSTRIAL RESEARCH; RENEWABLE ENERGY RESOURCES; TOPOLOGY; WIRELESS TELECOMMUNICATION SYSTEMS;

CIRCUIT SIMULATION;

EID: 84884606661     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICCEP.2013.6586975     Document Type: Conference Paper

References (36)

1. A. Emadi, Y.J. Lee, and K. Rajashakara, "Power electronics and motor drives in electric, hybrid electric and plug-in hybrid electric vehicles" IEEE Trans. Power Electron., vol. 55, no. 6, pp. 2237-2245, June 2008.
2. R. Candela, V. Di Dio, E. Riva Sanseverino, and P. Romano, "Reconfiguration techniques of partial shaded PV systems for the maximization of electrical energy production," in 2007 International Conference on Clean Electrical Power, ICCEP '07, 2007, pp. 716-719.
3. R. Inguanta, S. Piazza, C. Sunseri, A. Cino, V. Di Dio, D. La Cascia, R. Miceli, C. Rando, and G. Zizzo, "An electrochemical route towards the fabrication of nanostructured semiconductor solar cells," in SPEEDAM 2010 - Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010, pp. 1166-1171.
4. V. Cecconi, V. Di Dio, A. O. Di Tommaso, S. Di Tommaso, D. La Cascia, and R. Miceli, "Active power maximizing for wind electrical energy generating systems moved by a modular multiple blade fixed pitch wind turbine," SPEEDAM 2008 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2008, pp. 1460-1465.
5. G. Cipriani, V. Di Dio, and G. Ricco Galluzzo, "A photovoltaic system suitable for the battery pack charging of an electrically power assisted velocipede," in SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2012, pp. 1142-1147.
6. V. Di Dio, S. Favuzza, D. La Cascia, and R. Miceli, "Economical incentives and systems of certification for the production of electrical energy from renewable energy resources," in 2007 International Conference on Clean Electrical Power, ICCEP '07, 2007, pp. 277-282.
7. V. Di Dio, V. Franzitta, F. Muzio, G. Scaccianoce, and M. Trapanese, "The use of sea waves for generation of electrical energy and hydrogen," in MTS/IEEE Biloxi - Marine Technology for Our Future: Global and Local Challenges, OCEANS 2009, 2009.
8. G. Cipriani, V. Di Dio, D. La Cascia, R. Miceli, and R. Rizzo: "A novel approach for parameters determination in four lumped PV parametric model with operative range evaluations", International Review of Electrical Engineering (I.R.E.E.), vol. 8, Apr. 2013.
9. V. Di Dio, R. Miceli, C. Rando, and G. Zizzo, "Dynamics photovoltaic generators: Technical aspects and economical valuation," SPEEDAM 2010 International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2010, pp. 635-640.
10. R.A. Dougal, S. Liu, R.E. White, "Power and Life Extension of Battery-Ultracapacitor Hybrids" IEEE Trans. on Power Electron., 2002, vol. 25, n.1, pp.120-131, March 2002.
11. V. Boscaino, G. Capponi, and F. Marino, "Experimental test on a fuel cell-supercapacitor hybrid power supply for a digital still camera" Proceedings of the IEEE International Universities Power Engineering Conference, U PEC'09, Scotland, 2009, pp.1-5.
12. Z. Jiang, R.A. Dougal, and R. Leonard, "A Novel Digital Power Controller for Fuel Cell/Battery Hybrid Power Sources" in IEEE Int. App. Power Electron. Conf., APEC 2005, 6-10 March 2005, pp. 467-473.
13. V. Boscaino, M. Gaeta, G. Capponi, F. Marino, "Nonlinear digital control improving transient response: Design and test on a multiphase VRM", Power Electronics Electrical Drives Automation and Motion (SPEEDAM), June 14-16, 2010, pp.507-512.
14. V. Boscaino, R. Collura, G. Capponi, and F. Marino, "A fuel cell - battery hybrid power supply for portable applications". Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM'10, Italy, 2010, pp.580-585.
15. V. Di Dio, D. La Cascia, R. Miceli, and R. Liga, "Integrated mathematical model of proton exchange membrane fuel cell stack (PEMFC) with automotive synchronous electrical power drive". IEEE International Conference on Electrical Machines, ICEM'08, pp.1-6.
16. V. Boscaino, R. Miceli, G. Capponi, and D. Casadei, "Fuel cell modelling and test: experimental validation of model accuracy," in POWERENG 2013 - International Conference on Power Engineering, Energy and Electrical Drives, 2013, pp. 1-6.
17. M. Chun-Hua, "A novel three-dimensional, two-phase and non-isothermal numerical model for proton exchange membrane fuel cell", Journ. of Power Sources, vol. 195, pp. 1880-1887, 2010.
18. V. Boscaino, G. Capponi, and F. Marino, "FPGA implementation of a fuel cell emulator", International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM' 10, Italy, 2010, pp. 1297-1301. DOI: 10.1109/SPEEDAM.2010.5542090.
19. N. Sisworahardjo, T. Yalcinoz, M. Y. El-Sharkh, and M. Alam, "Neural network model of 100 W portable PEM fuel cell and experimental verification", Int. Journ. of Hydr. Energy, vol. 35, pp.9104-9109, 2010.
20. F. Massaro, L. Dusonchet, S. Favuzza, G. Morello "Analisi economico-finanziaria degli investimenti sul fotovoltaico in Italia". L'Energia Elettrica n. 03/09 maggio-giugno 2009, pp. 37-51, ISSN 0013-7308.
21. Brenna, M; Falvo, MC; Foiadelli, F; Martirano, L; Massaro, F; Poli, D; Vaccaro, A "Challenges in Energy Systems for the Smart- Cities of the Future" - 2nd IEEE International Conference & Exhibition ENERGYCON 2012, pp. 818-825, Florence, Italy, 9-12 Sept. 2012
22. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Linear-non- linear Digital Control for DC-DC Converters with Fast Transient Response", International Journal of Power and Energy Systems, 2009, vol. 29, pp.38-47. DOI: 10.2316/Journal.203.2009.1.203-4021.
23. J.J. Yun, H.J. Choe, Y.H. Hwang, Y.K. Park, "Improvement of power-conversion efficiency of a DC-DC boost converter using a passive snubber circuit" IEEE Trans. Ind. Electron., vol.59, no.4, pp.1808-1814, April 2012.
24. A. Dannier, R. Rizzo: "An overview of Power Electronic Transformer: Control strategies and topologies", Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2012, Sorrento, June 20-22, 2012, pp. 1552-1557.
25. V. Cecconi, V. D. Dio, A. O. D. Tommaso, D. La Cascia, and R. Miceli, "Test bench realization and application of specific working cycles for the characterization of wheelchair electrical drives," International Symposium on Industrial Electronics, 2006, vol. 3, pp. 2188-2193.
26. V. Di Dio, G. Cipriani, R. Miceli, and R. Rizzo: "Design criteria of tubular linear induction motors and generators: a prototype realization and its characterization", Leonardo Electronic Journal of Practices and Technologies, vol. 12, 2013.
27. R.F. Xue, K.W. Chang, and M. Je, "High-efficiency wireless power transfer for biomedical implants by optimal resonant load transformation", IEEE Trans. Circ. and Sys. I, vol. 60, no. 4, pp. 867-874, Apr. 2013.
28. F. Pellitteri, V. Boscaino, R. La Rosa, and G. Capponi, "Improving the efficiency of a Standard Compliant Wireless Battery Charger", in IEEE International Universities Power Engineering Conference, UPEC 2012, UK, 2012, DOI: 10.1109/UPEC.2012.6398572, pp. 1-5.
29. V. Boscaino, F. Pellitteri, G. Capponi, and R. La Rosa, "A Wireless battery charger Architecture for Consumer Electronics", IEEE International Conference on Consumer Electronics, ICCE 2012, Germany, 2012, pp.84-88. Doi: 10.1109/ICCE-Berlin.2012.6336483.
30. S. Hasanzadeh, S. Vaez-Zadeh, "Resonance Based Contactless Energy Transfer", Power Electronics and Drive Systems Technology, PEDSTC 2012, vol. 1, pp. 441-447, Feb. 2012.
31. S. Hasanzadeh, S. Vaez-Zadeh,nd A.H. Isfahani, "Optimization of a Contactless Power Transfer System for Electric Vehicles", IEEE Trans. on Vehicular Technology, vol. 61, no. 8, pp. 3566-3573, 2012.
32. V. Boscaino, P. Livreri, F. Marino, and M. Minieri, "Current-Sensing Technique for Current-Mode Controlled Voltage Regulator Modules". Microelectronics Journal, Elsevier, vol.39, no.12, Dec. 2008, pp.1852-1859.
33. C. Spataro: "A/D Conversion Based Measurements: Identification of the Parameters for the Uncertainty Evaluation", Proc. of AMUEM 2009 - International Workshop on Advanced Methods for Uncertainty Estimation in Measurement - Bucarest, 07-08 July 2009.
34. C. Spataro: "ADC Based Measurements: a Common Basis for the Uncertainty Estimation", Proc. of 17th IMEKO - TC4 Symposium. Kosice, Slovakia. Sept. 08-10. 2010.
35. S. Nuccio, C. Spataro, G. Tinè: "Virtual instruments: Uncertainty evaluation in the presence of unknown electromagnetic interferences", AMUEM 2008 Internat. Workshop Advanced Methods for Uncertainty Estimation in Measurement, Trento, 22 July 2008, pp. 56-61.
36. S. Nuccio, C. Spataro, G. Tinè: "Electromagnetic immunity of a portable PC-based measurement instrument", IWADC 2003, Perugia, Italy, Sept. 2003.