Comprehensive Drying Models based on Volume Averaging: Background, Application and Perspective

Modern Drying Technology

Volumn 1, Issue , 2011, Pages 1-55

  Perré, Patrick ^a   Rémond, Romain ^a   Turner, Ian W ^b  

^a Ecole Nationale Supérieure des Technologies et Industries du Bois   (France)

^b QUEENSLAND UNIVERSITY OF TECHNOLOGY   (Australia)

Author keywords

Application; Computational strategy; Drying models; Equations; Physical phenomena; Volume averaging

Indexed keywords

EID: 84884597815     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527631629.ch1     Document Type: Chapter

References (81)

1. Bear J., Corapcioglu, M. Y., 1987. Advances in Transport Phenomena in Porous Media. Martinus Nijhoff Publishers, Lancaster.
2. Bimbenet, J. J., Daudin, J. D., Wolf, E., 1985. Air drying kinetics of biological particles. In: Proceedings of the 4th International Drying Symposium. Kyoto, Japan.
3. Bird R. B., Stewart W. E., Lightfoot, E. N., 1960. Transport Phenomena. John Wiley, New York.
4. Bojan N., Easymesh-mesh generation software, niceno#univ.trieste.it
5. Bucki M., Perré P., 2003. Physical formulation and numerical modeling of high frequency heating of wood. Drying Technology Journal 21: 1151-1172.
6. Carbonell, R. G., Whitaker, S., 1983. Dispersion in pulsed systems. II: Theoretical developments for passive dispersion in porous media. Chem. Eng. Sci. 38: 1795-1802.
7. Carbonell, R. G., Whitaker, S., 1984. Heat and Mass Transfer in Porous Media. In: Fundamentals of Transport Phenomena in Porous Media, edited by J. Bear and M. Y. Corapcioglu, Martinus Nijoff Publishers, Dordrecht, The Netherlands, pp. 123-198.
8. Dhatt G., Touzot G., 1984. The Finite Element Method Displayed. Translation of: Une présentation de la méthode des éléments finis, Wiley-Interscience, New York, pp. 120-121.
9. Dullien F. A. L., Dong W., 1996. Experimental determination of the flow transport coefficients in the coupled equations of two-phase flow in porous media. Transport in Porous Media 25: 97-120.
10. Farruggia F., 1998. Détermination du comportement élastique d'un ensemble de fibres de bois à partir de son organisation cellulaire et d'essais mécaniques sous microscope. Thèse de Doctorat-ENGREF, Nancy, France.
11. Ferguson W. J., Turner I. W., 1996. A Control Volume Finite Element Numerical Simulation of the Drying of Spruce. J. Comp. Phy. 125: 59-70.
12. Forsyth P. A., 1994. Three-Dimensional Modeling of Steam Flush for DNAPL Site Remediation. Int. J. Num. Methods in Fluids 19: 1055-1081.
13. Glatzmaier G. C., Ramirez W. F., 1988. Use of volume averaging for the modeling of thermal properties of porous materials. Chem Eng. Sci. 43(12): 3157-3169.
14. George A., Liu J. W. H., 1981. Computer solution of large sparse positive definite systems, Prentice-Hall, Englewood Cliffs, NJ, USA.
15. Gray W. G., 1975. A derivation of the equations for multiphase transport, Chem. Eng. Sci. 30: 229-233.
16. Hornung U., 1997. Homogenization and porous media, Springer-Verlag, New York.
17. Ilic M., Turner I. W., 2005. Krylov subspaces and the analytic grade. Numerical Linear Algebra with Applications 12: 55-76.
18. Jason, A. C., 1958. A study of evaporation and diffusion processes in the drying of fish muscle. In: Fundamental Aspects of the Dehydration of Food Products. Society of Chemical Industry, London, and The Macmillan Co., New York, pp. 103-135.
19. Jayantha, P. A., Turner, I. W., 2003. A Second Order Finite Volume Technique for Simulating Transport in Anisotropic Media. The International Journal of Numerical Methods for Heat and Fluid Flow 13(1): 31-56.
20. Jennings A., McKeown J. J., 1992. Matrix Computation, 2nd Edition, John Wiley, New York.
21. Jung, S. K., Choi, Y. H., Shon, T. H., Choi, J. U., 1986. The drying characteristics of apples at various drying conditions. Korean Journal of Food Science and Technology 18(1): 61-65.
22. Kannan, D., Bandyopadhyay, S., 1995. Drying characteristics of a tropical marine fish slab. Journal of Food Science and Technology 32(1): 13-16.
23. Kamke, F. A., Casey, L. J., 1988. Fundamentals of flakeboard manufacture: internal-mat conditions. Forest Products Journal 38(6): 38-44.
24. Kelley C. T., 1995. Iterative methods for linear and nonlinear equations, number 16. In: Frontiers in Applied Mathematics, SIAM, Philadelphia.
25. Krischer, O., Kröll, K., 1963. Die wissenschaflichen Grundlagen der Trocknungstechnik. Springer-Verlag, Berlin.
26. Léné F., 1984. Contribution à l'étude des matériaux composite et de leur endomagement. Thèse d' état, Université Pierre et Marie Curie, Paris.
27. L'Hostis G., 1996. Contribution à la conception et à l'étude de structures composites thermoélastique. Thèse de Doctorat, Université Paris 6, Paris.
28. Lowery D. P., 1979. Vapor pressure generated in wood during drying, Wood Science 5: 73-80.
29. Magee, T. R. A., Wilkinson, C. P. D., 1992. Influence of process variables on the drying of potato slices. International Journal of Food Science and Technology 27: 541-549.
30. Marle C., 1982. On macroscopic equations governing multiphase flow with diffusion and chemical reactions in porous media. Int. J. Eng. Sci. 20: 643-662.
31. Mauget, B., Perré, P., 1999. A large displacement formulation for anisotropic constitutive laws, European Journal of Mechanics-A/Solids 18: 859-877.
32. May, B. K., Perré P., 2002. The importance of considering exchange surface area reduction to exhibit a constant drying flux period in foodstuffs. Journal of Food Engineering 54(33): 87-98.
33. Morgan R. B., 2002. GMRES with deflated restarting. SIAM J. Sci. Comput. 24(1): 20-37.
34. Moroney T. J., Turner I. W., 2006. A finite volume method based on radial basis functions for two-dimensional nonlinear diffusion equations. J. Applied Mathematical Modeling 30: 1118-1133.
35. Patankar S. V., 1980. Numerical Heat Transfer and Fluid Flow, Hemisphere publishing Corporation, New York.
36. Perré P., 1995. Drying with Internal Vaporization: Introducing the Concept of Identity Drying Card. Drying Technology Journal 13: 1077-1097.
37. Perré P., 1996. The Numerical Modeling of Physical and Mechanical Phenomena Involved in Wood Drying: an Excellent Tool for Assisting with the Study of New Processes. Tutorial, 5th Int. IUFRO Wood Drying Conference, Québec, Canada, pp. 9-38.
38. Perré P., 2002. Wood as a multi-scale porous medium: Observation, Experiment, and Modeling. Proceedings of the First International Conference of the European Society for Wood Mechanics, EPFL, Lausanne, Switzerland, pp. 365-384.
39. Perré P., 2004. Evidence of dual scale porous mechanisms during fluid migration in hardwood species: Part II: A dual scale computational model able to describe the experimental results. Chinese J. Chem. Eng. 12: 783-791.
40. Perré P., 2006. Multiscale aspects of heat and mass transfer during drying, Transport in Porous Media, 66(1-2): 59-76.
41. Perré P., Badel E., 2003. Properties of oak wood predicted from X-ray inspection: representation, homogenisation and localisation. Part II: Computation of macroscopic properties and microscopic stress fields. Annals of Forest Science 60: 247-257.
42. Perré P., Bucki M., 2004. High-frequency/vacuum drying of oak: modeling and experiment. 5th Workshop of COST Action E15, Athens, Greece, 10 pages.
43. Perré P., Degiovanni A., 1990. Simulations par volumes finis des transferts couplés en milieu poreux anisotropes: séchage du bois à basse et à haute temperature, Int. J. Heat and Mass Transfer 33: 2463-2478.
44. Perré, P., Martin, M., 1994. Drying at high temperature of heartwood and sapwood: theory, experiment and practical consequence on kiln control. Drying Technology 12(8): 1915-1941.
45. Perré, P., May B., 2001. A numerical drying model that accounts for the coupling between transfers and solid mechanics: Case of highly deformable products. Drying Technology Journal 19: 1629-1643.
46. Perré, P., May B., 2007. The existence of a first drying stage for potato proved by two independent methods, Journal of Food Engineering 78: 1134-1140.
47. Perré, P., Moser, M., Martin, M., 1993. Advances in transport phenomena during convective drying with superheated steam or moist air. Int. J. Heat and Mass Transfer 36: 2725-2746.
48. Perré, P. and Passard, J., 1995. A controlvolume procedure compared with the finite-element method for calculating stress and strain during wood drying. Drying Technology 13(3): 635-660.
49. Perré, P., Passard, J., 2004. A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions. Drying Technology Journal 22: 27-44.
50. Perré P., Rémond R., 2006. A dual scale computational model of kiln wood drying including single board and stack level simulation. Drying Technology Journal 24: 1069-1074.
51. Perré P., Turner I. W., 1996. The use of macroscopic equations to simulate heat and mass transfer in porous media. In: Mathematical Modeling and Numerical Techniques in Drying Technology, Chap. 2, edited by Turner, I. and Mujumdar, A. S., Marcel Dekker, New York, pp. 83-156.
52. Perré P., Turner I. W., 1997. Microwave drying of softwood in an oversized waveguide. AIChE Journal 43: 2579-2595.
53. Perré P., Turner I. W., 2000. An efficient two-dimensional cv-fe drying model developed for heterogeneous and anisotropic materials. 12th International Drying Symposium, Drying' 2000, proceedings on CD-Rom, paper 262, 10 pages, The Netherlands.
54. Perré P., Turner I. W., 2001. Determination of the Material Property Variations Across the Growth Ring of Softwood for Use in a Heterogeneous Drying Model. Holzforschung 55, 318-323, 417-425.
55. Perré P., I. W. Turner, 2002. A Heterogeneous Wood Drying Computational Model that accounts for Material Property Variation Across Growth Rings. Chemical Engineering Journal 86: 117-131.
56. Press W. H., Teukolsky S. A., Vetterling W. T., Flannery B. P., 1992. Numerical Recipes in Fortran-The Art of Scientific Computing. Cambridge University Press, Cambridge.
57. Quintard M., Whitaker S., 1993. One and two-equation models for transient diffusion processes in two-phase systems. In: Advances in Heat Transfer 23, Academic Press, New York, pp. 369-465.
58. Quintard M., Whitaker S., 1994. Transport in ordered and disordered porous media. Transport in Porous Media 14: 163-206.
59. Quintard M., Whitaker S., 1995. Local thermal equilibrium for transient heat conduction: theory and comparison with numerical experiments. Int. J. Heat and Mass Trans. 38: 2779-2796.
60. Rémond R., 2004. Approche déterministe du séchage des avivés de résineux de fortes épaisseurs pour proposer des conduites industrielles adaptées, PhD thesis, 209 p., ENGREF, Nancy, France.
61. Rémond, R., Passard, J., Perré, P., 2006. The effect of temperature and moisture content on the mechanical behavior of wood: comprehensive model applied to drying and bending. European Journal of Mechanics-A/Solids, 26(3), p. 558-572.
62. Saad Y., 1997. Analysis of augmented Krylov subspace techniques. SIAM Journal of Matrix Analysis and Applications 18: 435-449.
63. Saad Y., 2003. Iterative methods for sparse linear systems. Second Edition, SIAM, Philadelphia.
64. Salin J. G., 1989. Remarks on the influence of heartwood content in pine boards on final moisture content and degrade. IUFRO Wood Drying Symposium, Seattle.
65. Salin, J. G., 1992. Numerical prediction of checking during timber drying and a new mechanosorptive creep model. In: Holz als Roh-und Werkstoff, Vol. 50(5), pp. 195-200.
66. Sanchez-Palencia, E., 1980. Nonhomogeneous media and vibration theory. Lecture Notes in Physics 127, ed. by E. Sanchez-Palencia and A. Zaoui, Springer-Verlag, Berlin.
67. Sanchez-Hubert, J.Sanchez-Palencia, E., 1992. Introduction aux méthodes asymtotiques et à l' homogénéisation, Masson, Paris.
68. Saravacos, G. D., Charm, S. E., 1962. A study of the mechanism of fruit and vegetable dehydration. Food Technology 15: 78-80.
69. Sereno, A. M., Medeiros, G. L., 1990. A simplified model for the prediction of drying rates for foods. Journal of Food Engineering 12: 1-11.
70. Slattery J. C., 1967. Flow of viscoelastic fluids through porous media. Am. Inst. Chem. Eng. J. 13: 1066-1071.
71. Slattery, J. C., 1972. Momentum, Energy and Mass Transfer in Continua. McGraw-Hill, New York.
72. Suquet, P. M., 1985. Element of homogenization for ineslastic solid mechanics. In: Homogenization Techniques for Composite Media. Lecture Notes in Physics 272, ed. by E.Sanchez-Palencia and A. Zaoui, Springer-Verlag, Berlin.
73. Sweby P., 1984. High resolution schemes using flux limiters for hyperbolic conservation laws. SIAM J. Numer. Anal. 21: 995-1011.
74. Truscott S., Turner I. W., 2005. A Heterogeneous Wood Drying Computational Model. J. Applied Mathematical Modeling 29: 381-410.
75. Turner I. W., Perré P., 1996. A synopsis of the strategies and efficient resolution techniques used for modeling and numerically simulating the drying process. In: Numerical Methods and Mathematical Modeling of the Drying Process. Chap. 1, ed. by I. W.Turner and A.Mujumdar, Marcel Dekker, New York, pp. 1-82.
76. Turner I. W., Perré P., 2001. The use of implicit flux limiting schemes in the simulation of the drying process: A new maximum flow sensor applied to phase mobilities, Journal of Applied Mathematical Modeling 25: 513-540.
77. Unger A. J. A., Forsyth P. A., Sudicky E. A., 1996. Variable spatial and temporal weighting schemes for use in multi-phase compositional problems, Adv. Water Res. 19(1): 1-27.
78. Van Leer B., 1974. Towards the ultimate Conservative Difference Scheme, II. Monotonicity and Conservation Combined in a Second Order Scheme. J. Comp. Phys. 14: 361-370.
79. Whitaker S., 1977. Simultaneous Heat, Mass, and Momentum Transfer in Porous Media: A Theory of Drying. Advances in Heat Transfer 13: 119-203.
80. Whitaker S., 1998. Coupled Transport in Multiphase Systems: A Theory of Drying. Advances in Heat Transfer 31: 1-104.
81. Zhao, Y., Poulsen K. P., 1988. Diffusion in potato drying. Journal of Food Engineering 7: 249-262.