Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances

Journal of Membrane Science

Volumn 450, Issue , 2014, Pages 111-123

  Zhao, Xueting ^a,b   Su, Yanlei ^a,b   Li, Yafei ^a,b   Zhang, Runnan ^a,b   Zhao, Jiaojiao ^a,b   Jiang, Zhongyi ^a,b  

^a TIANJIN UNIVERSITY   (China)

^b The Co Innovation Center of Chemistry and Chemical Engineering of TianjinTianjin University   (China)

Author keywords

Amphiphilic membrane surface; Fouling release; Fouling resistant; Low surface energy; Surface segregation

Indexed keywords

AMPHIPHILIC MEMBRANES; FOULING RELEASE; FOULING-RESISTANT; FOURIER TRANSFORM INFRARED; LOW SURFACE ENERGY; POLY (ETHYLENE OXIDE) (PEO); POLYDIMETHYLSILOXANE PDMS; POLYETHERSULFONE MEMBRANE;

ADSORPTION; BIOFOULING; HYDROPHILICITY; MICROCHANNELS; PHOTOELECTRONS; POLYETHYLENE OXIDES; SHEAR FLOW; SILICONES; SURFACE SEGREGATION; X RAY PHOTOELECTRON SPECTROSCOPY;

MEMBRANES;

ALGINIC ACID; AMPHOPHILE; BOVINE SERUM ALBUMIN; COPOLYMER; DIMETICONE; DOCUSATE CALCIUM; MACROGOL; POLYETHERSULFONE;

ADSORPTION; AQUEOUS SOLUTION; ARTICLE; BIOFOULING; BIOMEDICAL ENGINEERING; CONTACT ANGLE; DESORPTION; HYDROPHILICITY; MEASUREMENT; MEMBRANE; MEMBRANE FORMATION; MOLECULAR DYNAMICS; OXIDATION REDUCTION REACTION; POLYMERIZATION; PRIORITY JOURNAL; SURFACE PROPERTY; SYNTHESIS; X RAY PHOTOELECTRON SPECTROSCOPY;

EID: 84884580353     PISSN: 03767388     EISSN: 18733123     Source Type: Journal    
DOI: 10.1016/j.memsci.2013.08.044     Document Type: Article

References (57)

1. Stevens K.N.J., Croes S., Boersma R.S., Stobberingh E.E., van der Marel C., van der Veen F.H., Knetsch M.L.W., Koole L.H. Hydrophilic surface coatings with embedded biocidal silver nanoparticles and sodium heparin for central venous catheters. Biomaterials 2011, 32:1264-1269.
2. Ragaseema V.M., Unnikrishnan S., Kalliyana Krishnan V., Krishnan L.K. The antithrombotic and antimicrobial properties of PEG-protected silver nanoparticle coated surfaces. Biomaterials 2012, 33:3083-3092.
3. Lejars M., Margaillan A., Bressy C. Fouling release coatings: a nontoxic alternative to biocidal antifouling coatings. Chem. Rev. 2012, 112:4347-4390.
4. Magin C.M., Cooper S.P., Brennan A.B. Non-toxic antifouling strategies. Mater. Today 2010, 13:36-44.
5. Mansouri J., Harrisson S., Chen V. Strategies for controlling biofouling in membrane filtration systems: challenges and opportunities. J. Mater. Chem. 2010, 20:4567-4586.
6. Miura Y., Watanabe Y., Okabe S. Membrane biofouling in pilot-scale membrane bioreactors (MBRs) treating municipal wastewater: impact of biofilm formation. Environ. Sci. Technol. 2006, 41:632-638.
7. Herrwerth S., Eck W., Reinhardt S., Grunze M. Factors that determine the protein resistance of oligoether self-assembled monolayers-internal hydrophilicity, terminal hydrophilicity, and lateral packing density. J. Am. Chem. Soc. 2003, 125:9359-9366.
8. Snellings G.M.B.F., Vansteenkiste S.O., Corneillie S.I., Davies M.C., Schacht E.H. Protein adhesion at poly(ethylene glycol) modified surfaces. Adv. Mater. 2000, 12:1959-1962.
9. Chang Y., Shih Y.-J., Lai C.-J., Kung H.-H., Jiang S. Blood-inert surfaces via ion-pair anchoring of zwitterionic copolymer brushes in human whole blood. Adv. Funct. Mater. 2013, 23:1100-1110.
10. Chang Y., Chang W.-J., Shih Y.-J., Wei T.-C., Hsiue G.-H. Zwitterionic sulfobetaine-grafted poly(vinylidene fluoride) membrane with highly effective blood compatibility via atmospheric plasma-induced surface copolymerization. ACS Appl. Mater. Interfaces 2011, 3:1228-1237.
11. Barroso T., Temtem M., Casimiro T., Aguiar-Ricardo A. Antifouling performance of poly(acrylonitrile)-based membranes: from green synthesis to application. J. Supercrit. Fluids 2011, 56:312-321.
12. Correia V.G., Coelho M., Barroso T., Raje V.P., Bonifácio V.D.B., Casimiro T., Pinho M.G., Aguiar-Ricardo A. Anti-biofouling 3D porous systems: the blend effect of oxazoline-based oligomers on chitosan scaffolds. Biofouling 2013, 29:273-282.
13. Ballester-Beltran J., Rico P., Moratal D., Song W., Mano J.F., Salmeron-Sanchez M. Role of superhydrophobicity in the biological activity of fibronectin at the cell-material interface. Soft Matter 2011, 7:10803-10811.
14. Sousa M.P., Mano J.F. Superhydrophobic paper in the development of disposable labware and lab-on-paper devices. ACS Appl. Mater. Interfaces 2013, 5:3731-3737.
15. Pernites R.B., Santos C.M., Maldonado M., Ponnapati R.R., Rodrigues D.F., Advincula R.C. Tunable protein and bacterial cell adsorption on colloidally templated superhydrophobic polythiophene films. Chem. Mater. 2011, 24:870-880.
16. Carman M.L., Estes T.G., Feinberg A.W., Schumacher J.F., Wilkerson W., Wilson L.H., Callow M.E., Callow J.A., Brennan A.B. Engineered antifouling microtopographies-correlating wettability with cell attachment. Biofouling 2006, 22:11-21.
17. Gudipati C.S., Finlay J.A., Callow J.A., Callow M.E., Wooley K.L. The antifouling and fouling-release perfomance of hyperbranched fluoropolymer (HBFP)-poly(ethylene glycol) (PEG) composite coatings evaluated by adsorption of biomacromolecules and the green fouling alga Ulva. Langmuir 2005, 21:3044-3053.
18. Gudipati C.S., Greenlief C.M., Johnson J.A., Prayongpan P., Wooley K.L. Hyperbranched fluoropolymer and linear poly(ethylene glycol) based amphiphilic crosslinked networks as efficient antifouling coatings: an insight into the surface compositions, topographies, and morphologies. J. Polym. Sci. Part A: Polym. Chem. 2004, 42:6193-6208.
19. Callow J.A., Callow M.E. Trends in the development of environmentally friendly fouling-resistant marine coatings. Nat. Commun. 2011, 2:244.
20. Sundaram H.S., Cho Y., Dimitriou M.D., Finlay J.A., Cone G., Williams S., Handlin D., Gatto J., Callow M.E., Callow J.A., Kramer E.J., Ober C.K. Fluorinated amphiphilic polymers and their blends for fouling-release applications: the benefits of a triblock copolymer surface. ACS Appl. Mater. Interfaces 2011, 3:3366-3374.
21. Weinman C.J., Finlay J.A., Park D., Paik M.Y., Krishnan S., Sundaram H.S., Dimitriou M., Sohn K.E., Callow M.E., Callow J.A., Handlin D.L., Willis C.L., Kramer E.J., Ober C.K. ABC triblock surface active block copolymer with grafted ethoxylated fluoroalkyl amphiphilic side chains for marine antifouling/fouling-release applications. Langmuir 2009, 25:12266-12274.
22. Park D., Weinman C.J., Finlay J.A., Fletcher B.R., Paik M.Y., Sundaram H.S., Dimitriou M.D., Sohn K.E., Callow M.E., Callow J.A., Handlin D.L., Willis C.L., Fischer D.A., Kramer E.J., Ober C.K. Amphiphilic surface active triblock copolymers with mixed hydrophobic and hydrophilic side chains for tuned marine fouling-release properties. Langmuir 2010, 26:9772-9781.
23. Krishnan S., Ayothi R., Hexemer A., Finlay J.A., Sohn K.E., Perry R., Ober C.K., Kramer E.J., Callow M.E., Callow J.A., Fischer D.A. Anti-biofouling properties of comblike block copolymers with amphiphilic side chains. Langmuir 2006, 22:5075-5086.
24. Weinman C.J., Gunari N., Krishnan S., Dong R., Paik M.Y., Sohn K.E., Walker G.C., Kramer E.J., Fischer D.A., Ober C.K. Protein adsorption resistance of anti-biofouling block copolymers containing amphiphilic side chains. Soft Matter 2010, 6:3237-3243.
25. Dimitriou M.D., Zhou Z., Yoo H.-S., Killops K.L., Finlay J.A., Cone G., Sundaram H.S., Lynd N.A., Barteau K.P., Campos L.M., Fischer D.A., Callow M.E., Callow J.A., Ober C.K., Hawker C.J., Kramer E.J. A general approach to controlling the surface composition of poly(ethylene oxide)-based block copolymers for antifouling coatings. Langmuir 2011, 27:13762-13772.
26. Wang Y., Betts D.E., Finlay J.A., Brewer L., Callow M.E., Callow J.A., Wendt D.E., DeSimone J.M. Photocurable amphiphilic perfluoropolyether/poly(ethylene glycol) networks for fouling-release coatings. Macromolecules 2011, 44:878-885.
27. Wang Y., Pitet L.M., Finlay J.A., Brewer L.H., Cone G., Betts D.E., Callow M.E., Callow J.A., Wendt D.E., Hillmyer M.A., DeSimonea J.M. Investigation of the role of hydrophilic chain length in amphiphilic perfluoropolyether/poly(ethylene glycol) networks: towards high-performance antifouling coatings. Biofouling 2011, 27:1139-1150.
28. Zhu X., Loo H.-E., Bai R. A novel membrane showing both hydrophilic and oleophobic surface properties and its non-fouling performances for potential water treatment applications. J. Membr. Sci. 2013, 436:47-56.
29. Chen W., Su Y., Peng J., Dong Y., Zhao X., Jiang Z. Engineering a robust, versatile amphiphilic membrane surface through forced surface segregation for ultralow flux-decline. Adv. Funct. Mater. 2011, 21:191-198.
30. Chen W., Su Y., Peng J., Zhao X., Jiang Z., Dong Y., Zhang Y., Liang Y., Liu J. Efficient wastewater treatment by membranes through constructing tunable antifouling membrane surfaces. Environ. Sci. Technol. 2011, 45:6545-6552.
31. Park J., Urata C., Masheder B., Cheng D.F., Hozumi A. Long perfluoroalkyl chains are not required for dynamically oleophobic surfaces. Green Chem. 2013, 15:100-104.
32. Kannan K., Koistinen J., Beckmen K., Evans T., Gorzelany J.F., Hansen K.J., Jones P.D., Helle E., Nyman M., Giesy J.P. Accumulation of perfluorooctane sulfonate in marine mammals. Environ. Sci. Technol. 2001, 35:1593-1598.
33. Cho Y., Sundaram H.S., Finlay J.A., Dimitriou M.D., Callow M.E., Callow J.A., Kramer E.J., Ober C.K. Reconstruction of surfaces from mixed hydrocarbon and PEG components in water: responsive surfaces aid fouling release. Biomacromolecules 2012, 13:1864-1874.
34. Sundaram H.S., Cho Y., Dimitriou M.D., Weinman C.J., Finlay J.A., Cone G., Callow M.E., Callow J.A., Kramer E.J., Ober C.K. Fluorine-free mixed amphiphilic polymers based on PDMS and PEG side chains for fouling release applications. Biofouling 2011, 27:589-602.
35. Cho Y., Cho D., Park J.H., Frey M.W., Ober C.K., Joo Y.L. Preparation and characterization of amphiphilic triblock terpolymer-based nanofibers as antifouling biomaterials. Biomacromolecules 2012, 13:1606-1614.
36. Cho Y., Sundaram H.S., Weinman C.J., Paik M.Y., Dimitriou M.D., Finlay J.A., Callow M.E., Callow J.A., Kramer E.J., Ober C.K. Triblock copolymers with grafted fluorine-free, amphiphilic, non-ionic side chains for antifouling and fouling-release applications. Macromolecules 2011, 44:4783-4792.
37. Martin D.J., Poole Warren L.A., Gunatillake P.A., McCarthy S.J., Meijs G.F., Schindhelm K. Polydimethylsiloxane/polyether-mixed macrodiol-based polyurethane elastomers: biostability. Biomaterials 2000, 21:1021-1029.
38. Mark J.E. Some interesting things about polysiloxanes. Acc. Chem. Res. 2004, 37:946-953.
39. Brady R.F., Singer I.L. Mechanical factors favoring release from fouling release coatings. Biofouling 2000, 15:73-81.
40. Thérien-Aubin H., Chen L., Ober C.K. Fouling-resistant polymer brush coatings. Polymer 2011, 52:5419-5425.
41. Nagarajan S., Srinivasan K.S.V. Block copolymerization initiated by Ce(IV)-poly(ethylene glycol) redox system-kinetics and characterization. Eur. Polym. J. 1994, 30:113-119.
42. Yan L., Wang Z.-K., Yan J.-J., Han L.-F., Zhou Q.-H., You Y.-Z. Selectively grafting polymer from the interior and/or exterior surfaces of bioreducible and temperature-responsive nanocapsules. Polym. Chem. 2013, 4:1243-1249.
43. Shannon M.A., Bohn P.W., Elimelech M., Georgiadis J.G., Marinas B.J., Mayes A.M. Science and technology for water purification in the coming decades. Nature 2008, 452:301-310.
44. Hester J.F., Mayes A.M. Design and performance of foul-resistant poly(vinylidene fluoride) membranes prepared in a single-step by surface segregation. J. Membr. Sci. 2002, 202:119-135.
45. Hester J.F., Banerjee P., Mayes A.M. Preparation of protein-resistant surfaces on poly(vinylidene fluoride) membranes via surface segregation. Macromolecules 1999, 32:1643-1650.
46. Wang Y.Q., Wang T., Su Y.L., Peng F.B., Wu H., Jiang Z.Y. Remarkable reduction of irreversible fouling and improvement of the permeation properties of poly(ether sulfone) ultrafiltration membranes by blending with pluronic F127. Langmuir 2005, 21:11856-11862.
47. Owens D.K., Wendt R.C. Estimation of the surface free energy of polymers. J. Appl. Polym. Sci. 1969, 13:1741-1747.
48. Van Oss C.J., Good R.J., Chaudhury M.K. Additive and nonadditive surface tension components and the interpretation of contact angles. Langmuir 1988, 4:884-891.
49. Shi Q., Ye S.J., Kristalyn C., Su Y.L., Jiang Z.Y., Chen Z. Probing molecular-level surface structures of polyethersulfone/Pluronic F127 blends using sum-frequency generation vibrational spectroscopy. Langmuir 2008, 24:7939-7946.
50. Inutsuka M., Yamada N.L., Ito K., Yokoyama H. High density polymer brush spontaneously formed by the segregation of amphiphilic diblock copolymers to the polymer/water interface. ACS Macro Lett. 2013, 2:265-268.
51. Zhao W., Su Y.L., Li C., Shi Q., Ning X., Jiang Z.Y. Fabrication of antifouling polyethersulfone ultrafiltration membranes using Pluronic F127 as both surface modifier and pore-forming agent. J. Membr. Sci. 2008, 318:405-412.
52. Vaidya A., Chaudhury M.K. Synthesis and surface properties of environmentally responsive segmented polyurethanes. J. Colloid Interface Sci. 2002, 249:235-245.
53. Pease D.C. The significance of the contact angle in relation to the solid surface. J. Phys. Chem. 1945, 49:107-110.
54. Morra M., Occhiello E., Garbassi F. Contact angle hysteresis in oxygen plasma treated poly(tetrafluoroethylene). Langmuir 1989, 5:872-876.
55. Chen S., Li L., Zhao C., Zheng J. Surface hydration: principles and applications toward low-fouling/nonfouling biomaterials. Polymer 2010, 51:5283-5293.
56. Yeh P.Y., Zhang Z., Lin M., Cao X. Nonfouling hydrophilic poly(ethylene glycol) engraftment strategy for PDMS/SU-8 heterogeneous microfluidic devices. Langmuir 2012, 28:16227-16236.
57. Krishnan S., Weinman C.J., Ober C.K. Advances in polymers for anti-biofouling surfaces. J. Mater. Chem. 2008, 18:3405-3413.