Effect of MoS2 on the tribological properties of in situ Fe 3Al-20 wt% Al2O3-4 wt% Cr composites

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Volumn 227, Issue 9, 2013, Pages 1018-1029

  Bai, Yaping ^a   Xing, Jiandong ^a   Ma, Shengqiang ^a   He, Yuanyuan ^a   Liu, Zhen ^a   Huang, Qian ^a   Gao, Yimin ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

In situ Fe3Al 20 wt Al2O3 4 wt Cr composites; MoS2; Tribological properties

Indexed keywords

DECOMPOSITION PROCESS; ENERGY DISPERSIVE SPECTRUM; FRICTION COEFFICIENTS; HIGH RELATIVE DENSITIES; HOT-PRESSING SINTERING; MOS2; SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS; TRIBOLOGICAL PROPERTIES;

FRICTION; HARDNESS; MICROSTRUCTURE; MOLYBDENUM COMPOUNDS; SCANNING ELECTRON MICROSCOPY; SINTERING; SPECTRUM ANALYSIS; TRIBOLOGY; WEAR OF MATERIALS; X RAY DIFFRACTION;

ALUMINUM;

EID: 84884555949     PISSN: 13506501     EISSN: 2041305X     Source Type: Journal    
DOI: 10.1177/1350650113479249     Document Type: Article

References (29)

1. Ko SH and Hanada S. In-situ production and microstructures of iron aluminide/TiC composites. Intermetallics 1999; 7: 947-955.
2. Subramanian R, Schneible JH and Alexander KB. Iron aluminide-titanium carbide composites by pressureless melt infiltration-microstructure and mechanical properties. Acta Mater 1996; 35: 583-588.
3. Mehrizi MZ, Saidi A and Shamanian M. Production of Fe3Al-TiC nanocomposite by mechanical alloying of FeTi2-Al-C powders. Mater Sci Technol 2011; 27: 1465-1468.
4. Subramanian R and Schneible JH. FeAl-TiC cermetsmelt inEltration processing and mechanical properties. Mater Sci Eng A 1998; A239-A240: 633-639.
5. Kass M, Brooks CR, Falcon D, et al. The formation of defects in Fe-Al alloys: electrical resistivity and specific heat measurements. Intermetallics 2002; 10: 951-966.
6. Krein R, Schneider A, Sauthoff G, et al. Microstructure and mechanical properties of Fe3Al-based alloys with strengthening boride precipitates. Intermetallics 2007; 15: 1172-1182.
7. Thakur SK and Dhindaw BK. The inFuence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefEcient of friction and microhardness. Wear 2001; 247: 191-201.
8. Gao MX, Pan Y, Oliveira FJ, et al. High strength TiC matrix Fe28Al toughened composites prepared by spontaneous melt infiltration. J Eur Ceram Soc 2006; 26: 3853-3859.
9. Kim SM and Morris DG. Long range order and vacancy properties in Al-rich Fe3Al and Fe3Al(Cr) alloys. Acta Mater 1998; 46: 2587-2602.
10. McKamey CG, Horton JA and Liu CT. Effect of chromium on properties of Fe3Al. J Mater Res 1989; 4: 1156-1163.
11. Suter P, Bulletin MRS, May, 1991, Pittsburgh, PA: The Materials Research Society Pittsburgh, p. 24.
12. Bae YW, Lee WY, Besmann TM, et al. Preparation and friction characteristics of self-lubricating TiN-MoS2 composite coatings. Mater Sci Eng A 1996; 209: 372-376.
13. Zhang Wy, Dmytro D, Muhammad P, et al. Fundamental understanding of the tribological and thermal behavior of Ag-MoS2 nanoparticle-based multi-component lubricating system. Wear 2012; 288: 9-16.
14. Wang J, Xing JD, Qiu ZB, et al. Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys. J Alloys Compounds 2009; 488: 117-122.
15. Bai YP, Xing JD, Wu HL, et al. The mechanical alloying mechanism of various Fe2O3-Al-Fe systems. Adv Powder Technol DOI: 10.1016/j.apt.2012.08.011.
16. Holt J and Munir Z. Combustion synthesis of titanium carbide: theory and experiment. J. Mater. Sci 1986; 21: 251-259.
17. Schaffer G and McCormick P. Displacement reactions during mechanical alloying. Metall Mater Trans A 1990; 21: 2789-2794.
18. Munir Z. Synthesis of high temperature materials by self-propagating combustion methods. Am Ceram Soc Bull 1988; 67: 342-349.
19. Rafaja D, Kratochvíl P and Kopeček J. On the ordering in Fe3Al. Scripta Mater 1996; 34: 1387-1392.
20. Wang J, Xing JD, Cao L, et al. Dry sliding wear behavior of Fe3Al alloys prepared by mechanical alloying and plasma activated sintering. Wear 2010; 268: 473-480.
21. 3 composites. Proc IMechE Part J: J Engineering Tribology 2013; 227: 67-68.
22. Kong H and Ashby MF. Wear mechanisms in brittle solids. Acta Metallurgica Mater 1992; 40: 2907-2920.
23. Ashby MF, Abulawi J and Kong HS. Temperature maps for frictional heating in dry sliding. Tribol Lett 1991; 34: 577-587.
24. Ashby MF and Lim SC. On surface temperatures at dry sliding surfaces. Scr Metall Mater 1990; 24: 805-810.
25. Liu RT, Li XB and Cheng SH. Self-lubrication mechanism of Ni-Cr-Mo-S alloy (in Chinese). Chin J Nonferrous Metals 2003; 13: 469.
26. Kan CY, Liu JZ, Zhang GW, et al. Preparation and tribological performance of a Ni-Cr-S alloy (in Chinese). Tribology 1994; 14: 193-204.
27. Pauschitz A, Roy M and Franek F. Mechanisms of sliding wear of metals and alloys at elevated temperatures. Tribol Int 2008; 41: 584-602.
28. Wang Y, Lin L, Shao WZ, et al. Effect of solid-solution treatment on microstructure and performance of GH4169 superalloy (in Chinese). Trans Mater Heat Treat 2007; 28: 176-179.
29. Wang JB, Lu JJ, Ouyang JL, et al. Study on the tribological properties of SiC-Ni-Co-Mo-PbO high-temperature self-lubricating cermet material (in Chinese). Tribology 1997; 17: 25-31.