Influence of drying method on the material properties of nanocellulose I: Thermostability and crystallinity

Cellulose

Volumn 20, Issue 5, 2013, Pages 2379-2392

  Peng, Yucheng ^a   Gardner, Douglas J ^a   Han, Yousoo ^a   Kiziltas, Alper ^a,b   Cai, Zhiyong ^c   Tshabalala, Mandla A ^c  

^a UNIVERSITY OF MAINE   (United States)

^b BARTIN UNIVERSITY   (Turkey)

^c FOREST PRODUCTS LABORATORY   (United States)

Author keywords

Cellulose nanocrystal; Crystallinity; Nanofibrillated cellulose; Thermostability

Indexed keywords

CELLULOSE NANO-CRYSTALS; CELLULOSE NANOCRYSTAL (CNC); CRYSTALLINITIES; CRYSTALLINITY INDEX; INFLUENCE OF DRYING METHOD; NANOFIBRILLATED CELLULOSE; NANOFIBRILLATED CELLULOSE (NFC); THERMOSTABILITY;

CELLULOSE; CELLULOSE DERIVATIVES; CLUSTERING ALGORITHMS; LOW TEMPERATURE DRYING; SOLAR DRYERS; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; X RAY DIFFRACTION;

DRYING;

ALGORITHMS; CELLULOSE; CELLULOSE DERIVATIVES; CRYSTALLINITY; DRYING; GRAVIMETRY; THERMAL ANALYSIS; X RAY DIFFRACTION;

EID: 84884414553     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-013-0019-z     Document Type: Article

References (63)

1. Azubuike CP, Rodríguez H, Okhamafe AO, Rogers RD (2012) Physicochemical properties of maize cob cellulose powders reconstituted from ionic liquid solution. Cellulose 19(2): 425-433.
2. Bhuiyan MTR, Hirai N, Sobue N (2000) Changes of crystallinity in wood cellulose by heat treatment under dried and moist conditions. J Wood Sci 46: 431-436.
3. Bloch J (2011) UMaine to build nation's only cellulose nanofibrils pilot plant. http://umaine. edu/news/blog/2011/10/28/umaine-to-build-nation's-only-cellulose-nanofibrils-pilot-plant/.
4. Cabrera RQ, Meersman F, McMillan PF, Dmitriev V (2011) Nanomechanical and structural properties of native cellulose under compressive stress. Biomacromolecules 12: 2178-2183.
5. Chakraborty A, Sain M, Kortschot M (2005) Cellulose microfibres as reinforcing agents for structural materials. In: Oksman K, Sain M (eds) Cellulose nanocomposites: processing, characterization and properties. American Chemical Society, Washington, DC, pp 169-186.
6. Cranston ED, Kan KHM, Eita M, Johansson E, Netrval J, Salajkova M, Arwin H, Wågberg L (2012) Mechanical testing of thin film nanocellulose materials. http://www. tappi. org/Hide/Events/2012-Nanotechnology-Conference/Papers/12NANO05. aspx. Accessed 28 Sept 2012.
7. Diddens I, Murphy B, Krisch M, Muller M (2008) Anisotropic elastic properties of cellulose measured using inelastic X-ray scattering. Macromolecules 41: 9755-9759.
8. Eichhorn SJ, Dufresne A, Aranguren M, Marcovich NE, Capadona JR, Rowan SJ, Weder C, Thielemans W, Roman M, Renneckar S, Gindl W, Veigel S, Keckes J, Yano H, Abe K, Nogi M, Nakagaito AN, Mangalam A, Simonsen J, Benight AS, Bismarck A, Berglund LA, Peijs T (2010) Review: current international research into cellulose nanofibres and nanocomposites. J Mater Sci 45: 1-33.
9. Espert A, Vilaplana F, Karlsson S (2004) Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A Appl Sci Manuf 35(11): 1267-1276.
10. Fengel D, Wegener G (1998) Wood: chemistry, ultrastructure, reactions. De Gruyter, Berlin.
11. Ferguson W (2012) Why wood pulp is world's new wonder material. New Sci 2878: 24.
12. French AD, Sntiago Cintrón M (2013) Cellulose polymorphy, crystallite size, and the Segal crystallinity index. Cellulose 20: 583-588.
13. Gardner DJ, Oporto GS, Mills R, Samir MASA (2008) Adhesion and surface issues in cellulose and nanocellulose. J Adhes Sci Technol 22: 545-567.
14. Garvey CJ, Parker IH, Simon GP (2005) On the interpretation of X-ray diffraction powder patterns in terms of the nanostructure of cellulose I fibers. Macromol Chem Phys 206(15): 1568-1575.
15. Gjønnea J, Norman N (1958) The use of half width and position of the lines in the X-ray diffractograms of native cellulose to characterize the structural properties of the samples. Acta Chem Scand 12(10): 2028-2033.
16. Gjønnea J, Norman N (1960) X-ray investigations on cellulose II and mixtures of cellulose I and II. 1. A method for characterizing and determining the relative contents of the two modifications. Acta Chem Scand 14(3): 683-688.
17. Goring DAI (1963) Thermal softening of lignin, hemicelluloses and cellulose. Pulp Paper Mag Can 64(12): T517-T527.
18. Guinier A (1963) X-ray diffraction in crystals, imperfect crystals, and amorphous bodies. W. H. Freeman and Company, San Francisco, London.
19. Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110: 3479-3500.
20. Hatakeyama H (1981) Structural change of amorphous cellulose by water- and heat-treatment. Makromol Chem 182: 1655-1668.
21. Hermans PH, Weidinger A (1946) On the recrystallization of amorphous cellulose. J Am Chem Soc 68(12): 2547-2552.
22. Herrick FW, Casebier RL, Hamilton JK, Sandberg KR (1983) Microfibrillated cellulose: morphology and accessibility. J Appl Polym Sci Symp 37: 797-813.
23. Hubbe MA, Rojas OJ, Lucia LA, Sain M (2008) Cellulosic nanocomposites: a review. BioResources 3(3): 929-980.
24. I. Polymer 38: 463-468.
25. Kilzer FJ, Broido A (1965) Speculations on the nature of cellulose pyrolysis. Pyrodynamics 2: 151-163.
26. Kim D, Nishiyama Y, Wada M, Kuga S (2001) High-yield carbonization of cellulose by sulfuric acid impregnation. Cellulose 8: 29-33.
27. Kimura M, Hatakeyama T, Nakano J (1974) DSC study on recrystallization of amorphous cellulose with water. J Appl Polym Sci 18: 3069-3076.
28. Klemm D, Philipp B, Heinze T, Heinze U, Wagenknecht W (1998) Comprehensive cellulose chemistry. Fundamentals and analytical methods, Vol 1. Weinheim, New York, Chichester, Brisbane, Singapore, Toronto: Wiley-VCH VerlagGmbH, Weinheim 1.
29. Klemm D, Kramer F, Moritz S, Lindstrom T, Ankerfors M, Gray D, Dorris A (2011) Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed Engl 50: 5438-5466.
30. Kouris M, Ruck H, Mason SG (1958) The effect of water removal on the crystallinity of cellulose. Can J Chem 36: 931-948.
31. Krässig HA (1993) Cellulose: structure, accessibility and reactivity. Gordon and Breach Science Publishers, Amsterdam, the Netherlands.
32. Langan P, Nishiyama Y, Chanzy H (2001) X-ray structure of mercerized cellulose II at 1 Å resolution. Biomacromolecules 2(2): 410-416.
33. Levan SL (1989) Thermal degradation. In: Schniewing AP (ed) Concise encyclopedia of wood &wood-based materials, 1st edn. Pergamon Press, Elmsford, NY, pp 271-273.
34. Li S, Lyons-hart J, Banyasz J, Shafer K (2001) Real-time evolved gas analysis by FTIR method: an experimental study of cellulose pyrolysis. Fuel 80: 1809-1817.
35. Maschio G, Koufopanos C, Lucchesi A (1992) Pyrolysis, a promising route for biomass utilization. Bioresour Technol 42: 219-231.
36. Matsuo M, Sawatari C, Iwai Y, Ozaki F (1990) Effect of orientation distribution and crystallinity on the measurement by X-ray diffraction of the crystal lattice moduli of cellulose I and II. Macromolecules 23: 3266-3275.
37. Moon RJ, Marini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40: 3941-3994.
38. Nakamura K, Hatakeyma T, Hatakeyma H (1981) Studies on bound water of cellulose by differential scanning calorimetry. J Text Inst 72(9): 607-613.
39. Nishino T, Takano K, Nakamae K (1995) Elastic modulus of the crystalline regions of cellulose polymorphs. J Polym Sci Polym Phys 33: 1647-1651.
40. Nishiyama Y, Langan P, Chanzy H (2002) Crystal structure and hydrogen-bonding system in cellulose Iβ from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 124(31): 9074-9082.
41. Nishiyama Y, Sugiyama J, Chanzy H, Langan P (2003) Crystal Structure and hydrogen bonding system in cellulose Iα from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 125: 14300-14306.
42. Peng Y, Shi SQ, Ingram L (2011) Chemical emissions from adhesive-bonded wood products at elevated temperatures. Wood Sci Technol 45: 627-644.
43. Peng Y, Gardner DJ, Han Y (2012a) Drying cellulose nanofibrils: in search of a suitable method. Cellulose 19(1): 91-102.
44. Peng Y, Han Y, Gardner DJ (2012b) Spray-drying cellulose nanofibrils: effect of drying process parameters on particle morphology and size distribution. Wood Fiber Sci 44(4): 448-461.
45. Qi H, Cai J, Zhang L, Kuga S (2009) Properties of films composed of cellulose nanowhiskers and a cellulose matrix regenerated from alkali/urea solution. Biomacromolecules 10(6): 1597-1602.
46. Quievy N, Jacquet N, Sclavons M, Deroanne C, Paquot M, Devaux J (2010) Influence of homogenization and drying on the thermal stability of microfibrillated cellulose. Polym Degrad Stab 95: 306-314.
47. Rämänen P, Penttilä PA, Svedström K, Maunu SL, Serimaa R (2012) The effect of drying method on the properties and nanoscale structure of cellulose whiskers. Cellulose 19(3): 901-912.
48. Roman M, Winter WT (2004) Effect of sulfate groups from sulfuric acid hydrolysis on the thermal degradation behavior of bacterial cellulose. Biomacromolecules 5: 1671-1677.
49. Saito T, Nishiyama Y, Putaux J, Vignon M, Isogai A (2006) Homogeneous suspensions of individualized microfibrils from TEMPO-catalyzed oxidation of native cellulose. Biomacromolecules 7(6): 1687-1691.
50. Sakurada I, Nukushina Y, Itoh T (1962) Experimental determination of the elastic modulus of crystalline regions in oriented polymers. J Polym Sci 57: 651-660.
51. Segal L, Creely JJ, Martin AE Jr., Conrad CM (1959) An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer. Text Res J 29(10): 786-794.
52. Sehaqui H, Salajkova M, Zhou Q, Berglund LA (2010) Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions. Soft Matter 6: 1824-1832.
53. Shafizadeh F (1982) Introduction to pyrolysis of biomass. J Anal Appl Pyrolysis 3: 283-305.
54. Shafizadeh F (1984) The chemistry of pyrolysis and combustion. In: Rowell RM (ed) The chemistry of solid wood. the American Chemical Society, Seattle, Washington, pp 489-529.
55. Shen DK, Gu S (2009) The mechanism for thermal decomposition of cellulose and its main products. Bioresour Technol 100: 6496-6504.
56. Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applicatioins. Polymers 2: 728-765.
57. Svagan AJ, Azizi Samir MAS, Bergund LA (2008) Biomimetic foams of high mechanical performance based on nanostructured cell walls reinforced by native cellulose nanofibrils. Adv Mater 20: 1263-1269.
58. Tanaka F, Fukui N (2004) The behavior of cellulose molecules in aqueous environments. Cellulose 11: 33-38.
59. Wadehra IL, Manley R, St J (1965) Recrystallization of amorphous cellulose. J Appl Polym Sci 9: 2627-2630.
60. Wallace R (2012) USDA under Secretary Sherman unveils nanocellulose production facility. http://blogs. usda. gov/2012/08/03/usda-under-secretary-sherman-unveils-nanocellulose-production-facility/.
61. Wegner TH, Jones PE (2006) Advancing cellulose-based nanotechnology. Cellulose 13: 115-118.
62. Yildiz S, Gümüşkaya E (2007) The effects of thermal modification on crystalline structure of cellulose in soft and hardwood. Build Environ 42: 62-67.
63. Yue Y (2011) A comparative study of cellulose I and II fibers and nanocrystals. School of renewable natural resources (Vol. Master of Science). Louisiana State University, Baton Rouge.