Stability of hydraulic grouts for masonry strengthening

Materials and Structures/Materiaux et Constructions

Volumn 46, Issue 10, 2013, Pages 1631-1652

  Miltiadou Fezans, A ^a   Tassios, T P ^b  

^a Ministry of Education and Religious Affairs   (Greece)

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

Bleeding; Hydraulic grouts; Injectability; Segregation; Specific surface; Stability; Superplasticizer; Water content

Indexed keywords

BLEEDING; CRITICAL WATER CONTENT; EMPIRICAL FORMULAS; HISTORICAL BUILDINGS; INJECTABILITY; PREDICTIVE MODELING; SPECIFIC SURFACE; SUPERPLASTICIZERS;

CONVERGENCE OF NUMERICAL METHODS; FLUIDITY; MORTAR; SEGREGATION (METALLOGRAPHY); STABILITY; SURFACE SEGREGATION; WATER CONTENT;

GROUTING;

EID: 84883780602     PISSN: 13595997     EISSN: None     Source Type: Journal    
DOI: 10.1617/s11527-012-0003-3     Document Type: Article

References (35)

1. Miltiadou-Fezans A, Tassios TP (2012) Penetrability of hydraulic grouts. Mater Struct. doi: 10.1617/s11527-012-0005-1
2. Miltiadou-Fezans A, Tassios TP (2012) Fluidity of hydraulic grouts for masonry-strengthening. Mater Struct. doi: 10.1617/s11527-012-9872-8
3. Miltiadou-Fezans A, Kalagri A, Kakkinou S, Ziagou A, Delinikolas N, Zarogianni E, Chorafa E (2008) Methodology for in situ application of hydraulic grouts on historic masonry structures. The case of the Katholikon of Dafni Monastery. In: D'Ayala D and Fodde E (eds) Proceedings of the 6th international conference on structural analysis of historic construction, vol II. CRC Press/Balkema, Taylor and Francis Group, Bath, pp 1025-1033, 2-4 July 2008
4. Miltiadou-Fezans A, Tassios TP (2009) Modern practical guidelines for the application of hydraulic grouts in historic constructions. In: Trakassopoulou K, Doussi M, Chatzitryphon N (eds) Proceedings of 2nd national conference "Appropriate interventions for the safeguarding of monuments and historical buildings. New design tendencies". Thessaloniki, pp 485-494, 14-16 October 2009
5. Bombled JP (1974) Rhéologie des mortiers et des bétons frais, étude de la pâte interstitielle de ciment, vol 688. Revue des matériaux de construction, Mai-Juin, pp 137-155
6. Ish-Shalom M, Greenberg SA (1962) The rheology of fresh Portland cement paste. In: Proceedings of IV International Symposium on the chemistry of cement, Washington 1960, monograph 43, vol II. National Bureau of Standards, Washington DC, pp 731-748
7. Legrand C (1972) Contribution a l' étude de la rheologie du beton frais. Materiaux et Constructions, vol 5, nο. 29, pp 275-295, and nο 30, pp 379-393
8. Legrand C (1982) La structure des suspensions de ciments. Le béton hydraulique. Presses de l' École Nationale des Ponts et Chaussées, Paris, pp 99-113
9. Littlejohn GS (1982) Design of cement based grouts. In: Proceedings of the conference on grouting in geotechnical engineering. ASCE, New Orleans, 10-12 Feb 1982, pp 1-7
10. Papadakis M (1959) L'injectabilité des coulis et mortiers de ciments. Revue des matériaux de construction, 531, publication technique no. 11. CERILH, pages, p 48
11. Powers T-C (1968) The properties of fresh concrete. Wiley, New York, pp 533-599
12. Vom Berg W (1979) Influence of specific surface and concentration of solids upon the flow behaviour of cement pastes, vol 31. Mag Concr Res 109:211-216
13. Aïtcin PC, Ballivy G, Parizeau R (1984) The use of condensed silica fume in grouts. Innovative cement grouting ACI special publication SP-83. American Concrete Institute, Detroit, pp 1-18
14. Domone PL, Tank SB (1986) Use of condensed silica fume in Portland cement grouts. In: Proceedings of the second international conference on fly ash, silica fume, slag and natural pozzolans in concrete, vol 2. ACI, Madrid, pp 1231-1260
15. Miltiadou AE (1990) Étude des coulis hydrauliques pour la réparation et le renforcement des structures et des monuments historiques en maçonnerie. Thèse de Doctorat de l'Ecole Nationale des Ponts et Chaussées. Pub by LCPC in Collection Etudes et Recherches des Laboratoires des Ponts et Chaussées, Paris, Dec 1991, p 278
16. Shannag MJ (2002) High-performance cementitious grouts for structural repair. Cem Concr Res 32(2002):803-808
17. Shimoda M, Ohmori H (1982) Ultra fine grouting material. In: Proceedings of conference on grouting in geotechnical engineering. ASCE, New Orleans, pp 77-91, 10-12 Feb 1982
18. Zebovitz S, Krizek RJ, Atmatzidis K (1989) Injection of fine sands with very fine cement grout. J Geotech Eng 115(12):1717-1733
19. Benhamou O (1994) Comportement rhéologique des coulis de liants hydrauliques ultrafins destinés a l injection. Ph.D. thesis, ENS des Mines de Paris, Paris, pp 1-318
20. Viseur V, Barrioulet M (1998) Critères d'injectabilité de coulis de ciments ultrafins. In: Materials and structures/matériaux et constructions, vol 31. Springer, New York, pp 393-399
21. Yahia A, Khayat KH (2003) Applicability of rheological models to high-performance grouts containing supplementary cementitious materials and viscosity enhancing admixture. In: Materials and structures/matériaux et constructions, vol 36. Springer, New York, pp 402-412
22. Saric-Coric M, Khayat KH, Tagnit-Hamou A (2003) Performance characteristics of cement grouts made with various combinations of high-range water reducer and cellulose-based viscosity modifier. Cem Concr Res 33:1999-2008
23. Valluzzi MR, da Porto F, Modena C (2003) Grout requirements for the injection of stone masonry walls. In: International conference on performance of construction materials: a new era of building. ICPCM, Cairo, 18-20 Feb 2003
24. Papadakis M (1957) Recherches sur le malaxage "a haute turbulence" des suspensions de ciment. Publication technique no. 82-83. Extrait de la Revue des Matériaux de Construction, CERILH, Neuss, pp 1-25
25. Markestad SA (1976) The Gukild-Carlsen method for making stabilized pastes of cement. Mater Struct 9(50):115-117
26. Lombardi G (1985) The role of cohesion in cement grouting of rock. In: 15th Congress on large dams. Com. Int. des Grands Barragges, Lausanne, Switzerland, Q.58 R.13, pp 235-261
27. Lombardi G (1990) La perméabilité et injectabilité des massifs rocheux fissures. Rev. Français Géotechnique 51:5-29
28. Mirza J, Mirza MS, Roy V, Saleh K (2002) Basic rheological and mechanical properties of high-volume fly ash grouts. Constr Build Mater 16:353-363
29. Ozcan T, Zaimoglou AS, Hinislioglou S, Altun S (2005) Taguchi approach for optimization of the bleeding on cement-based grouts. Tunnel Underground Space Technol 20(2005):167-173
30. Bras A, Henriques FMA (2012) Natural hydraulic lime based grouts: the selection of grout injection parameters for masonry consolidation. Constr Build Mater 26(2012):135-144
31. Van Rickstal F (2000) Grout injection of masonry, scientific approach and modeling. Katholieke Universiteit Leuven, Leuven
32. Bras A, Henriques FMA (2009) The influence of the mixing procedures on the optimization of fresh grout properties. Mater Struct 42:1423-1432
33. Toumbakari E-E (2002) Lime-pozzolan-cement grouts and their structural effects on composite masonry walls. Katholieke Universiteit Leuven, Leuven
34. Rosquoët F, Alexis A, Khelidj A, Phelipot A (2003) Experimental study of cement grout: rheological behavior and sedimentation. Cem Concr Res 33(2003):713-722
35. Miltiadou-Fezans A, Kalagri A, Triantafyllou M (2006) Research report for the design of hydraulic grouts of the consolidation and restoration of the Katholikon of Dafni Monastery. Comparative study of hydraulic lime based grouts. Research report. Directorate of Technical Research on Restoration, Hellenic Ministry of Culture, Athens, p 68