Spray drying of nanometric SYSZ powders to obtain plasma sprayable nanostructured granules

Ceramics International

Volumn 39, Issue 8, 2013, Pages 9447-9457

  Loghman Estarki, Mohammad Reza ^a   Edris, Hossein ^a   Razavi, R Shoja ^b   Jamali, Hossein ^b   Ghasemi, Reza ^b   Pourbafrany, Mousa ^b   Erfanmanesh, Mohammad ^b   Ramezani, Mazaher ^a,b  

^a ISFAHAN UNIVERSITY OF TECHNOLOGY   (Iran)

^b MALEK ASHTAR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Agglomerate; APS; Granules; Nanostructure; Plasma sprayable feedstocks; Spray drying

Indexed keywords

AGGLOMERATE; APS; COATING MICROSTRUCTURES; GRANULES; NANOSTRUCTURED GRANULES; SPRAY-DRYING METHOD; SPRAYABLE; THERMAL INSULATION CAPABILITIES;

AGGLOMERATION; COATINGS; GRANULATION; MICROSTRUCTURE; NANOSTRUCTURES; PLASMAS; SOL-GEL PROCESS; SPRAY DRYING;

FEEDSTOCKS;

EID: 84883760916     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2013.05.062     Document Type: Article

References (34)

1. M.R. Loghman-Estarki, R. ShojaRazavi, and H. Edris Synthesis of SYSZ nanocrystal via new wet chemical method Current Nanoscience 8 2012 767
2. W.B. Gong, C.K. Sha, D.Q. Sun, and W.Q. Wang Microstructures and thermal insulation capability of plasma-sprayed nanostructured ceria stabilized zirconia coatings Surface and Coatings Technology 201 2006 3109
3. A.J. Allen, G.G. Long, H. Boukari, J. Ilavsky, A. Kulkarni, S. Sampath, H. Herman, and A.N. Goland Microstructural characterization studies to relate the properties of thermal spray coatings to feedstock and spray conditions Surface and Coatings Technology 146-147 2001 544
4. P. Fauchais, G. Montavon, R.S. Lima, and B.R. Marple Engineering a new class of thermal spray nano-based microstructures from agglomerated nanostructured particles, suspensions and solutions: an invited review Journal of Physics D: Applied Physics 44 2011 093001
5. W.J. Walker, J.S. Reed, and S.K. Verma Influence of slurry parameters on the characteristics of spray-dried granules Journal of the American Ceramic Society 82 1999 1711
6. R.S. Lima, A. Kucuk, and C.C. Berndt Integrity of nanostructured partially stabilized zirconia after plasma spray processing Materials Science and Engineering A313 2001 75
7. H. Jamali, R. Mozafarinia, R. Shoja Razavi, R. Ahmadi-Pidani, and M.R Loghman-Estarki Fabrication and evaluation of plasma-sprayed nanostructured and conventional YSZ thermal barrier coatings Current Nanoscience 8 2012 402
8. X.J. Ning, C.X. Li, C.J. Li, and G.J. Yang Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5 mol% YSZ coating Vacuum 80 2006 1261
9. R. Peter, B.Strutt, lt. Kear, R.F. Boland, Method of Manufacturing of Nanostructred feeds, US Patent No. 6,025,034.
10. E. Sizgek, J.R. Bartlett, and M.P. Brungs Production of titanate microspheres by sol-gel and spray-drying Journal of Sol-Gel Science and Technology 13 1998 1011
11. 3 doped zirconia (SYDZ) and YSZ solid solution via modified and classic Pechini method, Crystal Engineering Communication, 2013, 10.1039/c3ce40288f.
12. A. Pattanayak, and A. Subramanian Production of meso- and giga-porous zirconia particles - an improved multi-step particle aggregation process Abhinandan Pattanayak, Anuradha Subramanian Powder Technology 192 2009 359
13. K. Masters Drying of droplets/sprays, in: Spray Drying Hand book 4th edn. 1991 John Wiley & Sons New York 347 348
14. T. Fengqiu, H. Xiaoxian, Z. Yufeng, and G. Jingkun Effect of dispersants on surface chemical properties of nanozirconia suspensions Ceramics International 26 2000 93
15. J.A. Eastman, U.S. Choi, S. Li, G. Soyez, L.J. Thompson, and R.J. Dimelfi Novel thermal properties of nanostructured materials Materials Science Forum 629 1999 312
16. H.S. Yang, G.R. Bai, L.J. Thompson, and J.A. Eastman Interfacial thermal resistance in nanocrystalline yttria-stabilized zirconia Acta Materialia 50 2002 2309
17. A. Mukherjee, B. Maiti, A.D. Sharma, R.N. Basu, and H.S. Maiti Correlation between slurry rheology, green density and sintered density of tape cast yttria stabilised zirconia Ceramics International 27 2001 731
18. K. Prabhakaran, A. Melkeri, N.M. Gokhale, T.K. Chongdar, and S.C. Sharma Direct coagulation casting of YSZ powder suspensions using MgO as coagulating agent Ceramics International 35 2009 1487
19. 3 particles processing by heating of ethanol-aques salt solution Ceramics International 27 2001 543
20. ASTM B0212-99, Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall flowmeter funnel
21. ASTM B 213-03, Standard Test Method for Flow Rate of Metal Powders.
22. 2, Re-Sc, Y nanocrystals Defect and Diffusion Forum 334 2013 60
23. X.Q. Cao, R. Vassen, S. Schwartz, W. Jungen, F. Tietz, and D. Stöever Spray-drying of ceramics for plasma-spray coating Journal of the European Ceramic Society 20 2000 2433
24. 2 nanoparticle suspensions to obtain nanostructured coatings by APS Surface and Coatings Technology 205 2010 987
25. 3 powders treated by calcining and plasma Powder Technology 212 2011 316
26. X. Jiang, C. Liu, M. Liu, and H. Zhu Influence of heat treatment on nanocrystalline zirconia powder and plasma-sprayed thermal barrier coatings Transactions of Nonferrous Metals Society 20 2010 2272
27. C. Liu, Z. Zhang, X. Jiang, M Liu, and Z. Zhu Comparison of thermal shock behaviors between plasma-sprayed nanostructured and conventional zirconia thermal barrier coatings Transactions of Nonferrous Metals Society 19 2009 99
28. P. Diez, and R.W. Smith The influence of powder agglomeration methods on plasma sprayed yttria containing Journal of Thermal Spray Technology 2 1993 165
29. J. Wigren, J.-F. de. Vries, and D. Greving Effects of powder morphology, microstructure, and residual stresses on thermal barrier coating thermal shock performance C.C. Berndt, Thermal Spray: Practical Solutions for Engineering Problems 1996 ASM International OH, USA 855 861
30. I.O. Golosnoy, A. Cipitri, and T.W. Clyne Heat transfer through plasmasprayed thermal barrier coatings in gas turbines: a review of recent work Journal of Thermal Spray Technology 18 2009 809
31. M. Salavati-Niasari, M. Dadkhah, and F. Davar Synthesis and characterization of pure cubic zirconium oxide nanocrystals by decomposition of bis-aqua, tris-acetylacetonato zirconium(IV) nitrate as new precursor complex Inorganica Chimica Acta 362 2009 3969
32. 2 nanoparticles by thermolysis of a new precursor Polyhedron 28 2009 3005
33. M. Hajizadeh Oghaz, R. Shoja Razavi, M.R. Loghman-Estarki, and R. Ghasemi Optimization of morphology and particle size of modified sol-gel synthesized YSZ nano powder using Taguchi method Journal of Nano Research 21 2013 65
34. F. Davar, A. Hassankhani, and M.R. Loghman-Estarki Controllable synthesis of metastable tetragonal zirconia nanocrystals using citric acid assisted sol-gel method Ceramics International 39 2013 2933