Debottlenecking the retrofitted thermally coupled distillation sequence

Industrial and Engineering Chemistry Research

Volumn 52, Issue 35, 2013, Pages 12635-12645

  Van Duc Long, Nguyen ^a   Lee, Moonyong ^a  

^a Yeungnam University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

DESIGN AND OPTIMIZATION; ENERGY AND CAPITAL COST SAVINGS; FRACTIONAL UTILIZATION OF AREAS; MULTI-COMPONENT SEPARATION; RESPONSE SURFACE METHODOLOGY; TEMPERATURE DIFFERENCES; THERMALLY COUPLED DISTILLATION SEQUENCES; THERMODYNAMIC FEASIBILITY;

DISTILLATION; HEAT PUMP SYSTEMS; STRUCTURAL OPTIMIZATION;

VAPORS;

EID: 84883710064     PISSN: 08885885     EISSN: 15205045     Source Type: Journal    
DOI: 10.1021/ie401140v     Document Type: Article

References (45)

1. Liu, Z. Y.; Jobson, M. Retrofit Design for Increasing the Processing Capacity of Distillation Columns 1. A Hydraulic Performance Indicator Chem. Eng. Res. Des. 2004, 82, 3-9
2. Bravo-Bravo, C.; Segovia-Hernandez, J.; Gutierrez-Antonio, C.; Duran, A.; Bonilla-Petriciolet, A.; Briones-Ramirez, A. Extractive Dividing Wall Column: Design and Optimization Ind. Eng. Chem. Res. 2010, 49, 3672-3688
3. Long, N. V. D.; Lee, S. H.; Lee, M. Y. Design and Optimization of a Dividing Wall Column for Debottlenecking of the Acetic Acid Purification Chem. Eng. Process 2010, 49, 825-835
4. Agrawal, R.; Fidkowski, Z. T. New Thermally Coupled Schemes for Ternary Distillation AIChE J. 1999, 45, 485-496
5. Fidkowski, Z.; Krolikowski, L. Thermally Coupled System of Distillation Columns: Optimization Procedure AIChE J. 1986, 32, 537-546
6. Fidkowski, Z.; Krolikowski, L. Minimum Energy Requirements of Thermally Coupled Distillation Systems AIChE J. 1987, 33, 643-654
7. Long, N. V. D.; Lee, M. Y. Optimal Retrofit Design of Extractive Distillation to Energy Efficient Thermally Coupled Distillation Scheme AIChE J. 2013, 59, 1175-1182
8. Long, N. V. D.; Lee, M. Y. Design and Optimization of a Dividing Wall Column Structure by Factorial Design Korean J. Chem. Eng. 2012, 29, 567-573
9. Blancarte-Palacios, J. L.; Bautista-Valadés, M. N.; Hernández Castro, S.; Rico-Ramírez, V.; Jiménez, A. Energy-Efficient Designs of Thermally Coupled Distillation Sequences for Four-Component Mixtures Ind. Eng. Chem. Res. 2003, 42, 5157-5164
10. Tamayo-Galván, V. E.; Segovia-Hernández, J. G.; Hernández, S.; Cabrera-Ruiz, J.; Alcántara-ávila, J. R. Controllability Analysis of Alternate Schemes to Complex Column Arrangements with Thermal Coupling for the Separation of Ternary Mixtures Com. Chem. Eng. 2008, 32, 3057-3066
11. Tedder, D. W.; Rudd, D. F. Parametric Studies in Industrial Distillation: Part I. Design Comparisons AIChE J. 1978, 24, 303-315
12. Lee, S. H.; Shamsuzzoha, M.; Han, M.; Kim, Y. H.; Lee, M. Y. Study of Structural Characteristics of a Divided Wall Column using the Sloppy Distillation Arrangement Korean J. Chem. Eng. 2011, 28, 348-356
13. Long, N. V. D.; Lee, M. Y. Improvement of Natural Gas Liquid Recovery Energy Efficiency through Thermally Coupled Distillation Arrangements Asia-Pac. J. Chem. Eng. 2012, 7, S71-S77
14. Lee, S. G.; Long, N. V. D.; Lee, M. Y. Design and Optimization of Natural Gas Liquefaction and Recovery Processes for Offshore Floating Liquid Natural Gas Plants Ind. Eng. Chem. Res. 2012, 51, 10021-10030
15. Long, N. V. D.; Lee, M. Y. Optimal Retrofit of a Side Stream Column to a Dividing Wall Column for Energy Efficiency Maximization Chem. Eng. Res. Des. 2013, 10.1016/j.cherd.2013.04.003
16. Long, N. V. D.; Lee, M. Y. Improvement of the Deethanizing and Depropanizing Fractionation Steps in NGL Recovery Process using Dividing Wall Column J. Chem. Eng. Jpn. 2012, 45, 285-294
17. Shizou, M.; Zheng, S. N.; Ikuho, Y. Analysis of Divided-Wall Column for Extractive Distillation Kagaku Kogaku Ronbunshu 2000, 26, 627-632
18. 2 Emissions in Extractive Distillation: Part II. Dynamic Behavior Chem. Eng. Res. Des. 2010, 88, 135-145
19. 2 Emissions in Extractive Distillation Chem. Eng. Res. Des. 2009, 87, 145-152
20. Amminudin, K. A.; Smith, R. Design and Optimization of Fully Thermally Coupled Distillation Columns. Part 2: Application of Dividing Wall Columns in Retrofit Chem. Eng. Res. Des. 2001, 79, 716-724
21. Long, N. V. D.; Lee, M. Y. Improved Energy Efficiency in Debottlenecking Using a Fully Thermally Coupled Distillation Column Asia-Pac. J. Chem. Eng. 2011, 6, 338-348
22. Premkumar, R.; Rangaiah, G. P. Retrofitting Conventional Column Systems to Dividing Wall Columns Chem. Eng. Res. Des. 2009, 87, 47-60
23. Triantafyllou, C. The Design Optimization and Integration of Dividing Wall Distillation Columns. Ph. D. Thesis, UMIST, Manchester, U.K., 1991.
24. Gadalla, M.; Jobson, M.; Smith, R. Shortcut Models for Retrofit Design of Distillation Columns Chem. Eng. Res. Des. 2003, 81, 971-986
25. Box, G. E. P.; Wilson, K. B. On the Experimental Attainment of Optimum Conditions J. R. Stat. Soc. Ser. B 1951, 13, 1-45
26. Box, G. E. P.; Behnken, D. W. Some New Three Level Designs for The Study of Quantitative Variables Technometrics 1960, 2, 455-475
27. Erbay, Z.; Icier, F. Optimization of Hot Air Drying of Olive Leaves using Response Surface Methodology J. Food Eng. 2009, 91, 533-541
28. Long, N. V. D.; Lee, M. Y. Dividing Wall Column Structure Design using Response Surface Methodology Com. Chem. Eng. 2012, 37, 119-124
29. Mannan, S.; Fakhru'l-Razi, A.; Alam, M. Z. Optimization of Process Parameters for The Bioconversion of Activated Sludge by Penicillium Corylophilum, Using Response Surface Methodology J. Environ. Sci. 2007, 19, 23-28
30. Kister, H. Z. Distillation Design; McGraw-Hill: New York, 1992; pp 336-337.
31. Reid, J. A. Distributed Distillation with Heat Integration. PTQ AUTUMN 2000 2000, 85-95.
32. Liu, Z. Y.; Jobson, M. Retrofit Design for Increasing the Processing Capacity of Distillation Columns. 2. Proposing and Evaluating Design Options Chem. Eng. Res. Des. 2004, 82, 10-17
33. Dhole, V. R.; Linnhoe, B. Distillation Column Targets Com. Chem. Eng. 1993, 17, 549-560
34. Franklin, N. L.; Wilkinson, M. B. Reversibility in the Separation of Multicomponent Mixtures Trans. Int. Chem. Eng. 1982, 60, 276-282
35. Terranova, B. E. A.; Westberg, W. Temperature-Heat Diagrams for Complex Columns. 1. Intercooled/Interheated Distillation Columns Int. Eng. Chem. Res. 1989, 28, 1374-1379
36. Fitzmorris, R. E.; Mah, R. S. H. Improving Distillation Column Design using Thermodynamic Availability Analysis AIChE J. 1980, 26, 265-273
37. Fonyo, Z. Thermodynamic Analysis of Rectification. I. Reversible Model of Rectification Int. Chem. Eng. 1974, 14, 18-27
38. Fonyo, Z. Thermodynamic Analysis of Rectification. II. Finite Cascade Models Int. Chem. Eng. 1974, 14, 203-210
39. Rivera-Ortega, P.; Picón-Núñez, M.; Torres-Reyes, E.; Gallegos-Muñoz, A. Thermal Integration of Heat Pumping Systems in Distillation Columns Appl. Thermal Eng. 1999, 19, 819-829
40. Manley, D. B. Deethanizer/Depropanizer Sequences with Thermal and Thermo-Mechanical Coupling and Component Distribution. U.S. Patent No. 5,673,571, 1997.
41. Aspen HYSYS Thermodynamics COM Interface, Version V7.1; Aspen Technology: Burlington, MA, 2009.
42. Turton, R.; Bailie, R. C.; Whiting, W. B.; Shaeiwitz, J. A; Bhattacharyya, D. Analysis, Synthesis, and Design of Chemical Processes, 4 th ed.; Prentice Hall: Upper Saddle River, NJ, 2012; pp 187-220.
43. Luyben, W. L. Design and Control of Distillation Columns with Intermediate Reboiler Ind. Eng. Chem. Res. 2004, 43, 8244-8250
44. Long, N. V. D.; Lee, M. Y. Design and Optimization of Heat Integrated Dividing Wall Columns for Improved Debutanizing and Deisobutanizing Fractionation of NGL Korean J. Chem. Eng. 2013, 30, 286-294
45. Biegler, L. T.; Grossmann, I. E.; Westerberg, A. W. Systematic Methods of Chemical Process Design; Prentice Hall Inc.: Upper Saddle River, NJ, 1997; pp 110-141.