A comparison study of Portland cement hydration kinetics as measured by chemical shrinkage and isothermal calorimetry

Cement and Concrete Composites

Volumn 39, Issue , 2013, Pages 23-32

  Pang, Xueyu ^a   Bentz, Dale P ^b   Meyer, Christian ^c   Funkhouser, Gary P ^a   Darbe, Robert ^a  

^a HALLIBURTON   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^c Columbia University ^*  (United States)

Author keywords

Cement hydration; Chemical shrinkage; Heat of hydration; Isothermal calorimetry; Kinetics; Oilwell cement

Indexed keywords

CALORIMETERS; CALORIMETRY; CEMENTS; CURING; ENZYME KINETICS; ISOTHERMS; KINETICS; OIL WELL CEMENTING; PORTLAND CEMENT; SHRINKAGE; THERMOCHEMISTRY;

CEMENT COMPOSITIONS; CEMENT HYDRATION; CHEMICAL SHRINKAGE; CURING TEMPERATURE; EARLY STAGE HYDRATIONS; HEAT OF HYDRATION; HYDRATION KINETICS; ISOTHERMAL CALORIMETRY;

HYDRATION;

EID: 84883632619     PISSN: 09589465     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconcomp.2013.03.007     Document Type: Article

References (34)

1. Parrott LJ, Geiker M, Gutteridge WA, Killoh D. Monitoring Portland cement hydration: comparison of methods. Cem Concr Res 1990;20:919-26.
2. Gutteridge WA, Dalziel JA. Filler cement: the effect of the secondary component on the hydration of portland cement: Part I. A fine non-hydraulic filler. Cem Concr Res 1990;20:778-82.
3. Bentz DP. A three-dimensional cement hydration and microstructure program: I. Hydration rate, heat of hydration, and chemical shrinkage, NISTIR 5756. US Department of Commerce, Washington DC; 1995.
4. Escalante-Garcia JI. Nonevaporable water from neat OPC and replacement materials in composite cements hydrated at different temperatures. Cem Concr Res 2003;33(11):1883-8.
5. Lura P, Winnefeld F, Klemm S. Simultaneous measurements of heat of hydration and chemical shrinkage on hardening cement pastes. J Therm Anal Calorim 2010;101(3):925-32.
6. Geiker M. Studies of Portland cement hydration: measurements of chemical shrinkage and a systematic evaluation of hydration curves by means of the dispersion model. PhD thesis, Technical University of Denmark; 1983.
7. Mounanga P, Baroghel-Bouny V, Loukili A, Khelidj A. Autogenous deformations of cement pastes: Part I. Temperature effects at early age and micro-macro correlations. Cem Concr Res 2006;36:110-22. (Pubitemid 41773620)
8. Peethamparan S, Weissinger E, Vocaturo J, Zhang J, Scherer G. Monitoring chemical shrinkage using pressure sensors. Adv Mater Sci Concr ACI SP-270 2010;7:77-88.
9. Pang X, Meyer C. Cement chemical shrinkage as measure of hydration kinetics and its relationship with nonevaporable water. ACI Mater J 2012;109(3):341-52.
10. Zhang J, Weissinger EA, Peethamparan S, Scherer GW. Early hydration and setting of oil well cement. Cem Concr Res 2010;40:1023-33.
11. Scherer GW, Zhang J, Thomas JJ. Nucleation and growth models for hydration of cement. Cem Concr Res 2012;42:982-93.
12. Pang X, Meyer C, Darbe R, Funkhouser GP. Modeling the effect of curing temperature and pressure on cement hydration kinetics. ACI Mater J 2013;110(2):137-48.
13. API Specification 10A. Specification for cements and materials for well cementing, American Petroleum Institute; 2010. p. 38.
14. ASTM C150/C150M - 09. Standard specification for Portland cement. ASTM International, West Conshohocken, PA; 2009. p. 10.
15. ASTM C1608. Standard test method for chemical shrinkage of hydraulic cement paste. ASTM International, West Conshohocken, PA; 2007. p. 4.
16. Sant G, Lura P, Weiss J. Measurement of volume change in cementitious materials at early ages: review of testing protocols and interpretation of results. J Trans Res Rec 2006;1979:21-9.
17. Costoya M. Kinetics and microstructural investigation on the hydration of tricalcium silicate. Doctoral thesis, École Polytechnique Fédérale de Lausanne, Switzerland; 2008.
18. Pang X. Effects of curing temperature and pressure on the chemical, physical, and mechanical properties of Portland cement. PhD dissertation, Columbia University, New York; 2011.
19. ASTM C1679. Standard practice for measuring hydration kinetics of hydraulic cementitious mixtures using isothermal calorimetry. West Conshohocken, PA: ASTM International; 2009.
20. Bentz DP, Ferraris CF. Rheology and setting of high volume fly ash mixtures. Cem Concr Compos 2010;32(4):265-70.
21. Mills RH. Factors influencing cessation of hydration in water cured cement pastes, special report no. 90. In: Proceedings of the symposium on the structure of Portland cement paste and concrete. Highway Research Board, Washington DC; 1966. p. 406-24.
22. 2 content and chemical shrinkage of hydrating cement pastes using analytical approach. Cem Concr Res 2004;34:255-65.
23. Swaddiwudhipong S, Chen D, Zhang MH. Simulation of the exothermic hydration process of Portland cement. Adv Cem Res 2002;14(2):61-9. (Pubitemid 34554478)
24. Schindler AK, Folliard KJ. Heat of hydration models for cementitious materials. ACI Mater J 2005;102(1):24-33. (Pubitemid 40325151)
25. Poole JL, Riding KA, Folliard KJ, Juenger MCG, Schindler AK. Methods for calculating activation energy for Portland cement. ACI Mater J 2007;104(1):303-11.
26. Hewlett PC. Lea's chemistry of cement and concrete. 4th ed. Oxford, England: Butterworth-Heinemann; 1998.
27. Escalante-Garcia JI, Sharp JH. Effect of temperature on the hydration of the main clinker phases in Portland cements: Part I, neat cements. Cem Concr Res 1998;28(9):1245-57. (Pubitemid 128634285)
28. Taylor HFW. Cement chemistry. 2nd ed. London, UK: Thomas Telford; 1997.
29. Bentz DP, Barret T, de la Varga I, Weiss J. Relating compressive strength to heat release in mortars. Adv Civ Eng Mater, in press
30. ASTM C1074. Standard practice for estimating concrete strength by the maturity method. West Conshohocken, PA: ASTM International; 2010. p. 10.
31. Bushnell-Watson SM. The effect of temperature upon the setting behaviour of refractory CAC. PhD thesis, University of Sheffield; 1987.
32. Banfill PFG. Superplasticizers for Ciment Fondu Part 2: effect of temperature on the hydration reaction. Adv Cem Res 1995;7:151-7.
33. Bentz D, Sant G, Weiss J. Early-age properties of cement-based materials: I. Influence of cement fineness. ASCE J Mater Civ Eng 2008;20(7):502-8. (Pubitemid 351865517)
34. Bentz DP. Blending different fineness cements to engineer the properties of cement-based materials. Mag Concr Res 2010;62(5):327-38.