Sinterability, hardenabilility and mechanical properties of Mn-containing PM steels through the use of a specially designed Fe-Mn-C master alloy

Advances in Powder Metallurgy and Particulate Materials - 2006, Proceedings of the 2006 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2006

Volumn , Issue , 2006, Pages 795-7108

  Sainz, Shandra ^a   Martínez, Vicente ^a   Dougan, Mark ^b   Baumgaertner, Frank ^c   Castro, Francisco ^a  

^a CEIT   (Spain)

^b Centro de Hemodiálisis Granollers   (Spain)

^c Schunk ^*  (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

HIGH-TEMPERATURE PROCESSING; INDUSTRIAL PROCESSING; LABORATORY STUDIES; MICROSTRUCTURAL DEVELOPMENT; PRICE FLUCTUATION; PROCESSING CONDITION; SINTERING MECHANISM; THERMODYNAMICAL;

ALLOYING; ALLOYING ELEMENTS; ALLOYS; CERIUM ALLOYS; MANGANESE; MECHANICAL PROPERTIES; SINTERING;

POWDER METALLURGY;

EID: 84883337199     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (43)

1. S. M. Kaufman, "Reexamination of the sintering process for ferrous alloys",Modern developments in Powder Met., 6, 265 (1974).
2. G. Zapf, G. Hoffmann, K. Dalal, "Effect of additional alloying elements on the properties of sintered manganese steels",Powder Metallurgy, 18, 214 (1975).
3. A. Salak, "Sintered Manganese steels, Part I: effect of structure of initial iron powder upon mechanical properties",Powder Metallurgy International, 12, 28 (1980).
4. A. Salak, "Sintered Manganese steels, Part II: Manganese evaporation during sintering",Powder Metallurgy International, 12, 72 (1980).
5. A. N. Klein, R. Oberacker, F. Thümmler, "Sintering of iron powder with addition of ferromanganese",Sintering '85, Plenum Press, ed by G. C. Kuczynski et. al., 343 (1985).
6. A. N. Klein, R. Oberacker, F. Thümmler, "High strength Si-Mn- alloyed sintered steels. Sinterability and homogenisation",Powder Metallurgy International, 17, 71 (1985).
7. S. Banerjee, V. Gemenetzis, F. Thümmler, "Liquid phase formation during sintering of low-alloy steels with carbide base master alloy additions",Powder Metallurgy, 126 (1980).
8. S. Mocarski, D. W. Hall, R. A. Chernenkoff, D. A. Yaeger, C. O. McHugh, "Master alloys to obtain premixed hardenable powder metallurgy steels",Powder Metallurgy, 39, 130 (1996).
9. S. Unami, O. Furukimi, "Effect of graphite addition and sintering temperature on strength and toughness of sintered compacts made from Cr-Mn cantaining steel powder",J. of the Japan Society of Powder and Powder Metallurgy, 40, 630 (1993).
10. A. Salak, "High strength sintered manganese steel",Modern developments in Powder Met., 13, 183 (1981).
11. S. C. Mitchell, A. S. Wronski, A. Cias, M. Stoytchev, "Microstructure and mechanical properties of Mn-Cr-Mo-C steels sintered at ≥1140",Advances in Powder Metallurgy and Particulate Materials, 2, 129 (1999).
12. T. Pieczonka, M. Stoytchev, S. C. Mitchell, Procs. of European Congress on Powder Metallurgy, Nice, France 2001, 316-321.
13. V. Sinka, M. Selecka, A. Salak, "The influence of iron powder grade and manganese carrier on the homogeneity modulus of sintered Mn steels",Materials Science Forum, 416-418, 455 (2003).
14. A. Salak, M. Selecka, R. Bures, "Manganese in ferrous powder metallurgy",Powder Metallurgy Progress, 1, 41 (2001).
15. Z. Zhang, R. Sandström, "Fe-Mn-Si master alloy steel by powder metallurgy processing",Journal of Alloys and Compounds, 363, 194 (2004).
16. M. Sarasola, T. Gómez-Acebo, F. Castro, Procs. of European Congress on Powder Metallurgy, Nice, France 2001, 266-271.
17. P. Beiss, "Master alloy approach for Cr-Mn containing steels",Advances in Powder Metallurgy and Particulate Materials, CD in preparation (2005).
18. A. Salak, M. Selecka, L. Parilak, "Some properties of powder forged steel based on chromium prealloyed powders of high oxygen content",J of Materials Processing Technology, 143-144, 18 (2003).
19. E. Dudrova, M. Kabatova, R. Bidulsky, A. S. Wronski, "Industrial processing, microstructures and mechanical properties of Fe- (2-4)Mn- (0.85Mo)- (0.3-0.7)C sintered steels",Powder Met., 47, 180 (2004).
20. A. Salak, M. Selecka, L. Parilak, Procs. of Europen Congress on Powder Metallurgy, Nice, France 2001, 251-256.
21. M. Gagne, Y. Trudel, "Effects of post-sintering cooling on the properties of low alloy sintered materials",Advances in Powder Metallurgy, 4, 115 (1991).
22. P. Jones, K. Buckley-Golder, R. Lawcock, R. Shivanath, "Densification strategies for high endurance components",The Int. J. of Powder metallurgy, 33(3), 37 (1997).
23. P. K. Jones, K. Buckley-Golder, D. Sarafinchan, "Developing P/M gear tooth and bearing surfaces for high stress applications",The Int. J. of Powder metallurgy, 34(1), 26 (1998).
24. A. Salak, "Manganese vapor-protection of premixed manganese steels against oxidation during sintering",Powder Metallurgy International, 18, 266 (1986).
25. A. Salak, "Manganese sublimation and carbon ferromanganese liquid phase formation during sintering of premixed manganese steels",The International Journal of Powder Metallurgy & Powder Technology, 16, 369 (1980).
26. A. Salak, "Diffusion induced grain boundary migration in alloying iron powder with manganese vapours",Kovove Materialy, 27, 159 (1989).
27. A. Salak, "Activated alloying of Fe-Mn powder systems by manganese vapour during sintering",Sci. Sintering, 21, 145 (1989).
28. A. Salak, "Effect of extreme sintering condition upon properties of sintered manganese steels",Powder Metallurgy International, 16, 260 (1984).
29. M. Selecka, V. Simkulet, Procs. of World Congress on PM, Euro PM2004, Vienna, Austria 2004.
30. B. Lindsley, Procs. of World Congress on PM (Euro PM 2004), Vienna, Austria 2004, 251-256.
31. B. Lindsley, Procs. of Int. Congress on PM, Chicago, USA 2004, 1-9.
32. P. G. Shewmon, Transformations in metals (McGrraw-Hill, 1969), pp. Chap. 8.
33. B. Sundman, B. Jansson, A. JO,Calphad, 2, 154 (1985).
34. I. Ansara, B. Sundman, Procs. of Computer handling and dissemination of data Xth CODATA, Ottawa, Canada 1986.
35. W. Huang, "A thermodynamic assesment of the Fe-Mn-C system",Metall. Trans., 21A, 2115 (1990).
36. T. Gómez-Acebo, M. Sarasola, F. Castro, "Systematic search of low melting point alloys in the Fe-Cr-Mn-Mo-C system",Computer Coupling of Phase Diagrams and Thermochemistry, 27, 325 (2003).
37. D. R. Gaskell, Introduction to the thermodynamics of materials (Taylor & Francis, ed. 3rd, 1995), pp. 219.
38. M. Hillert, G. R. Purdy, "Chemically induced grain boundary migration",Acta Met., 26, 333 (1978).
39. J. W Cahn, J. D. Pan, R. W. Balluffi, "Diffusion induced grain boundary migration",Scripta Met., 13, 503 (1979).
40. Zong-Sen Yu, P. G. Shewmon, "Diffusion driven grain boundary motion in iron during zincification",Metall. Trans., 13A, 1567 (1982).
41. M. Hillert, "On the driving force for diffusion induced grain boundary migration",Scripta Met., 17, 237 (1983).
42. K. Nohara, K.-I. Hirano,Trans. Iron Steel Inst. Jpn., Suppl 11, 1267 (1971).
43. ASM, Heat treaters guide: Standard practices and procedures for steel (P.U.Unterweiser H. E. Boyer J. K. Kubbs, 1982), pp. 1-113.